From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Wendy Ng" Subject: [PATCH 0/3] thermal: bcm281xx: Add Temperature Monitor driver Date: Fri, 25 Oct 2013 17:00:26 -0700 Message-ID: <1382745629-1123-1-git-send-email-wendy.ng@broadcom.com> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Sender: linux-pm-owner@vger.kernel.org To: Rob Herring , Pawel Moll , Mark Rutland , Stephen Warren , Ian Campbell , Eduardo Valentin Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, Christian Daudt , Markus Mayer , Tim Kryger , Matt Porter , Wendy Ng List-Id: devicetree@vger.kernel.org This patch series adds the support of the Temperature Monitor driver for Broadcom bcm281xx SoCs. This TMON driver can be used with the Thermal Framework. This patch series incoporates the feedback from the old series: V1: https://lkml.org/lkml/2013/9/23/424 V2: https://lkml.org/lkml/2013/9/27/555 Note that this patch series is dependent on the following patches: https://lkml.org/lkml/2013/9/26/787 http://www.spinics.net/lists/arm-kernel/msg274963.html https://lkml.org/lkml/2013/10/3/645 Wendy Ng (3): thermal: bcm281xx: Add Temperature Monitor driver ARM: configs:enable thermal framework for bcm281xx ARM: dts: Add TMON driver support to bcm281xx .../bindings/thermal/bcm-kona-thermal.txt | 24 +++ arch/arm/boot/dts/bcm11351-brt.dts | 4 + arch/arm/boot/dts/bcm11351.dtsi | 29 ++++ arch/arm/boot/dts/bcm28155-ap.dts | 4 + arch/arm/configs/bcm_defconfig | 4 +- drivers/thermal/Kconfig | 11 ++ drivers/thermal/Makefile | 1 + drivers/thermal/bcm_kona_tmon.c | 173 ++++++++++++++++++++ 8 files changed, 249 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt create mode 100644 drivers/thermal/bcm_kona_tmon.c -- 1.7.9.5