From: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
To: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: "Sascha Hauer" <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Tomi Valkeinen" <tomi.valkeinen-l0cyMroinI0@public.gmane.org>,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
"Grant Likely"
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Rob Herring"
<rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
"Denis Carikli" <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>,
"Jean-Christophe Plagniol-Villard"
<plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>,
"Pawel Moll" <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Stephen Warren"
<swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
"Ian Campbell"
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
"Eric Bénard" <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Subject: [PATCHv4][ 3/6] video: mx3fb: Add device tree suport.
Date: Mon, 4 Nov 2013 17:15:21 +0100 [thread overview]
Message-ID: <1383581724-14817-3-git-send-email-denis@eukrea.com> (raw)
In-Reply-To: <1383581724-14817-1-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
Cc: Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>
Cc: linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
ChangeLog v3->v4:
- Updated bindings.
- Updated documentation accordinly.
- Updated code accordinly.
- Fixed the lack of "ret =" in
of_property_read_string(display_np, "model", &name);
- Supressed some compilation warnings.
ChangeLog v2->v3:
- The device tree bindings were reworked in order to make it look more like the
IPUv3 bindings.
- The interface_pix_fmt property now looks like the IPUv3 one.
---
.../devicetree/bindings/video/fsl,mx3-fb.txt | 42 +++++++
drivers/video/Kconfig | 2 +
drivers/video/mx3fb.c | 119 +++++++++++++++++---
3 files changed, 148 insertions(+), 15 deletions(-)
create mode 100644 Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
new file mode 100644
index 0000000..60faff5
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
@@ -0,0 +1,42 @@
+Freescale MX3 framebuffer.
+==========================
+
+Required properties:
+- compatible: Should be "fsl,mx3fb". compatible chips include the imx31 and the
+ imx35.
+- reg: should be register base and length as documented in the datasheet.
+- clocks: Handle to the ipu_gate clock.
+- display: Phandle to a "fsl,mx3-parallel-display" compatible display node.
+
+Example:
+
+lcdc: mx3fb@53fc00b4 {
+ compatible = "fsl,mx3-fb";
+ reg = <0x53fc00b4 0x0b>;
+ clocks = <&clks 55>;
+};
+
+Display support
+===============
+Required properties:
+- compatible: Should be "fsl,mx3-parallel-display".
+- model : The user-visible name of the display.
+
+Optional properties:
+- interface_pix_fmt: How this display is connected to the
+ crtc. Currently supported types: "rgb24", "rgb565", "rgb666".
+
+It can also have an optional timing subnode as described in
+ Documentation/devicetree/bindings/video/display-timing.txt.
+
+Example:
+
+display0: display@di0 {
+ compatible = "fsl,mx3-parallel-display";
+ interface-pix-fmt = "rgb666";
+ model = "CMO-QVGA";
+};
+
+&lcdc {
+ display = <&display0>;
+}
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 84b685f..edcfa33 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2357,6 +2357,8 @@ config FB_MX3
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VIDEOMODE_HELPERS
+ select FB_MODE_HELPERS
default y
help
This is a framebuffer device for the i.MX31 LCD Controller. So
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index cfdb380..75087c8 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -31,6 +31,8 @@
#include <linux/platform_data/dma-imx.h>
#include <linux/platform_data/video-mx3fb.h>
+#include <video/of_display_timing.h>
+
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -757,11 +759,13 @@ static int __set_par(struct fb_info *fbi, bool lock)
sig_cfg.Hsync_pol = true;
if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
sig_cfg.Vsync_pol = true;
- if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+ if ((fbi->var.sync & FB_SYNC_CLK_INVERT) ||
+ (fbi->var.sync & FB_SYNC_PIXDAT_HIGH_ACT))
sig_cfg.clk_pol = true;
if (fbi->var.sync & FB_SYNC_DATA_INVERT)
sig_cfg.data_pol = true;
- if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+ if ((fbi->var.sync & FB_SYNC_OE_ACT_HIGH) ||
+ (fbi->var.sync & FB_SYNC_DE_HIGH_ACT))
sig_cfg.enable_pol = true;
if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
sig_cfg.clkidle_en = true;
@@ -1351,21 +1355,69 @@ static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
return fbi;
}
+static int match_dt_disp_data(const char *property)
+{
+ if (!strcmp("rgb666", property))
+ return IPU_DISP_DATA_MAPPING_RGB666;
+ else if (!strcmp("rgb565", property))
+ return IPU_DISP_DATA_MAPPING_RGB565;
+ else if (!strcmp("rgb24", property))
+ return IPU_DISP_DATA_MAPPING_RGB888;
+ else
+ return -EINVAL;
+}
+
static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
{
struct device *dev = mx3fb->dev;
struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
- const char *name = mx3fb_pdata->name;
+ struct device_node *np = dev->of_node;
+ const char *name;
+ const char *ipu_disp_format;
unsigned int irq;
struct fb_info *fbi;
struct mx3fb_info *mx3fbi;
const struct fb_videomode *mode;
int ret, num_modes;
+ struct fb_videomode of_mode;
+ struct device_node *display_np;
+
+ if (np) {
+ display_np = of_parse_phandle(np, "display", 0);
+ if (!display_np) {
+ dev_err(dev, "Can't get the display device node.\n");
+ return -EINVAL;
+ }
+
+ of_property_read_string(display_np, "interface-pix-fmt",
+ &ipu_disp_format);
+ if (!ipu_disp_format) {
+ mx3fb->disp_data_fmt = IPU_DISP_DATA_MAPPING_RGB666;
+ dev_warn(dev,
+ "ipu display data mapping was not defined, using the default rgb666.\n");
+ } else {
+ mx3fb->disp_data_fmt =
+ match_dt_disp_data(ipu_disp_format);
+ }
+
+ if (mx3fb->disp_data_fmt == -EINVAL) {
+ dev_err(dev, "Illegal display data format \"%s\"\n",
+ ipu_disp_format);
+ return -EINVAL;
+ }
- if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
- dev_err(dev, "Illegal display data format %d\n",
+ ret = of_property_read_string(display_np, "model", &name);
+ if (ret) {
+ dev_err(dev, "Missing display model name\n");
+ return -EINVAL;
+ }
+ } else {
+ name = mx3fb_pdata->name;
+ if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
+ dev_err(dev, "Illegal display data format %d\n",
mx3fb_pdata->disp_data_fmt);
- return -EINVAL;
+ return -EINVAL;
+ }
}
ichan->client = mx3fb;
@@ -1386,12 +1438,24 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
goto emode;
}
- if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
- mode = mx3fb_pdata->mode;
- num_modes = mx3fb_pdata->num_modes;
+ if (np) {
+ ret = of_get_fb_videomode(display_np, &of_mode,
+ OF_USE_NATIVE_MODE);
+ if (!ret) {
+ mode = &of_mode;
+ num_modes = 1;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
} else {
- mode = mx3fb_modedb;
- num_modes = ARRAY_SIZE(mx3fb_modedb);
+ if (mx3fb_pdata->mode || !mx3fb_pdata->num_modes) {
+ mode = mx3fb_pdata->mode;
+ num_modes = mx3fb_pdata->num_modes;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
}
if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
@@ -1421,7 +1485,8 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
mx3fbi->mx3fb = mx3fb;
mx3fbi->blank = FB_BLANK_NORMAL;
- mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
+ if (!np)
+ mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
init_completion(&mx3fbi->flip_cmpl);
disable_irq(ichan->eof_irq);
@@ -1449,13 +1514,26 @@ emode:
return ret;
}
+static int imx_dma_is_dt_ipu(struct dma_chan *chan)
+{
+ /* Example: 53fc0000.ipu */
+ if (chan && chan->device && chan->device->dev) {
+ const char *name = dev_name(chan->device->dev);
+ name = strchr(name, '.');
+ if (name)
+ return !strcmp(name, ".ipu");
+ }
+
+ return 0;
+}
+
static bool chan_filter(struct dma_chan *chan, void *arg)
{
struct dma_chan_request *rq = arg;
struct device *dev;
struct mx3fb_platform_data *mx3fb_pdata;
- if (!imx_dma_is_ipu(chan))
+ if (!imx_dma_is_ipu(chan) && !imx_dma_is_dt_ipu(chan))
return false;
if (!rq)
@@ -1464,8 +1542,12 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
dev = rq->mx3fb->dev;
mx3fb_pdata = dev->platform_data;
- return rq->id == chan->chan_id &&
- mx3fb_pdata->dma_dev == chan->device->dev;
+ /* When using the devicetree, mx3fb_pdata is NULL */
+ if (imx_dma_is_dt_ipu(chan))
+ return rq->id == chan->chan_id;
+ else
+ return rq->id == chan->chan_id &&
+ mx3fb_pdata->dma_dev == chan->device->dev;
}
static void release_fbi(struct fb_info *fbi)
@@ -1565,9 +1647,16 @@ static int mx3fb_remove(struct platform_device *dev)
return 0;
}
+static struct of_device_id mx3fb_of_dev_id[] = {
+ { .compatible = "fsl,mx3-fb", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mx3fb_of_dev_id);
+
static struct platform_driver mx3fb_driver = {
.driver = {
.name = MX3FB_NAME,
+ .of_match_table = mx3fb_of_dev_id,
.owner = THIS_MODULE,
},
.probe = mx3fb_probe,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-11-04 16:15 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-04 16:15 [PATCHv4][ 1/6] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Denis Carikli
[not found] ` <1383581724-14817-1-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-11-04 16:15 ` [PATCHv4][ 2/6] dma: ipu: Add devicetree support Denis Carikli
[not found] ` <1383581724-14817-2-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-11-05 6:09 ` Sascha Hauer
2013-11-04 16:15 ` Denis Carikli [this message]
2013-11-04 16:15 ` [PATCHv4][ 4/6] video: mx3fb: Introduce regulator support Denis Carikli
2013-11-04 16:15 ` [PATCHv4][ 5/6] ARM: dts: i.MX35: Add display support Denis Carikli
[not found] ` <1383581724-14817-5-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-11-04 17:05 ` Fabio Estevam
2013-11-04 16:15 ` [PATCHv4][ 6/6] ARM: dts: mbimxsd35 Add video and displays support Denis Carikli
2013-11-04 19:01 ` [PATCHv4][ 1/6] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Geert Uytterhoeven
2013-11-05 13:47 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383581724-14817-3-git-send-email-denis@eukrea.com \
--to=denis-fo0siakyzcbqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=tomi.valkeinen-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).