From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Chen Subject: [PATCH v3 03/11] usb: doc: phy-mxs: update binding for adding anatop phandle Date: Tue, 5 Nov 2013 09:49:35 +0800 Message-ID: <1383616183-10511-4-git-send-email-peter.chen@freescale.com> References: <1383616183-10511-1-git-send-email-peter.chen@freescale.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1383616183-10511-1-git-send-email-peter.chen@freescale.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: balbi@ti.com, shawn.guo@linaro.org, rob.herring@calxeda.com, grant.likely@linaro.org Cc: marex@denx.de, devicetree@vger.kernel.org, m.grzeschik@pengutronix.de, frank.li@freescale.com, linux-doc@vger.kernel.org, alexander.shishkin@linux.intel.com, gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, peter.chen@freescale.com, kernel@pengutronix.de, festevam@gmail.com, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Add anatop phandle which is used to access anatop registers to control PHY's power and other USB operations. Signed-off-by: Peter Chen --- Documentation/devicetree/bindings/usb/mxs-phy.txt | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt index 5835b27..e2d5211 100644 --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt @@ -4,10 +4,12 @@ Required properties: - compatible: Should be "fsl,imx23-usbphy" - reg: Should contain registers location and length - interrupts: Should contain phy interrupt +- fsl,anatop: phandle for anatop register, it is only for mx6 SoC serial Example: usbphy1: usbphy@020c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; + fsl,anatop = <&anatop>; }; -- 1.7.1