[PATCH v3 00/11] Add power management support for MXS PHY

[PATCH v3 00/11] Add power management support for MXS PHY

[Peter Chen]

Hi Felipe & Shawn,

The serial adds power management support for MXS PHY, it includes:

- Add three common PHY APIs, .set_wakeup, .notify_suspend, notify_resume.
- Related above API implementation at mxs phy driver
- misc changes for mxs phy to support low power mode and wakeup.

My github tree: https://github.com/hzpeterchen/linux-usb
branch: master
It is based on linux-next-1029.

Changes for v3:
- Using flag bit to indicate SoC features/bugs, so we can remove
platform_device_id.
- Remove 3 unnecessary dts/doc patches due to above change
- Several comment change

Changes for v2:

- Add missing patches which introduce platform judgement code [1/14,2/14]
- re-order the patch sequence, like doc->dts->source file,
the reviewers can know the meaning of dt properties before review source
- Add description of two IC problems exsiting at mxs PHY; change
"high speed" to "HS" and "non-high speed" to "FS/LS" [5/14]
- Change the dt property disconnect-line-without-vbus
that the separator should be "-" not the "_", meanwhile, related source
code has changed.
- Using one local variable to get the function return val to avoid long
condition statement. [13/14]

Peter Chen (11):
  usb: phy-mxs: Add platform judgement code
  usb: phy-mxs: Add auto clock and power setting
  usb: doc: phy-mxs: update binding for adding anatop phandle
  ARM: dts: imx6: add anatop phandle for usbphy
  usb: phy-mxs: Add anatop regmap
  usb: phy: add notify suspend and resume callback
  usb: phy-mxs: Add implementation of nofity_suspend and notify_resume
  usb: phy-mxs: Enable IC fixes for related SoCs
  usb: phy: Add set_wakeup API
  usb: phy-mxs: Add implementation of set_wakeup
  usb: phy-mxs: Add system suspend/resume API

 Documentation/devicetree/bindings/usb/mxs-phy.txt |    2 +
 arch/arm/boot/dts/imx6qdl.dtsi                    |    2 +
 drivers/usb/phy/phy-mxs-usb.c                     |  313 ++++++++++++++++++++-
 include/linux/usb/phy.h                           |   39 +++
 4 files changed, 341 insertions(+), 15 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 01/11] usb: phy-mxs: Add platform judgement code

[Peter Chen]

The mxs-phy has several bugs and features at different
versions, the driver code can get it through of_device_id.data.

Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 drivers/usb/phy/phy-mxs-usb.c |   59 ++++++++++++++++++++++++++++++++++------
 1 files changed, 50 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index fdd33b4..8b9d80c 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
  * Copyright (C) 2012 Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
  * on behalf of DENX Software Engineering GmbH
  *
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of_device.h>
 
 #define DRIVER_NAME "mxs_phy"
 
@@ -34,13 +35,55 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+/* Do disconnection between PHY and controller without vbus */
+#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS	BIT(0)
+
+/*
+ * The PHY will be in messy if there is an wakeup after putting
+ * bus to suspend (set portsc.suspendM) but before setting PHY to low
+ * power mode (set portsc.phcd).
+ */
+#define MXS_PHY_ABNORAML_IN_SUSPEND		BIT(1)
+
+/*
+ * The SOF sends too fast after resuming, it will cause disconnection
+ * between host and high speed device.
+ */
+#define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
+
+struct mxs_phy_platform_flag {
+	unsigned int flags;
+};
+
+static const struct mxs_phy_platform_flag imx23_phy_data = {
+	.flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
+};
+
+static const struct mxs_phy_platform_flag imx6q_phy_data = {
+	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
+		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct mxs_phy_platform_flag imx6sl_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
+	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
+	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+
 struct mxs_phy {
 	struct usb_phy phy;
 	struct clk *clk;
+	unsigned int flags;
 };
 
-#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
-
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
 	int ret;
@@ -131,6 +174,9 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	struct clk *clk;
 	struct mxs_phy *mxs_phy;
 	int ret;
+	const struct of_device_id *of_id =
+			of_match_device(mxs_phy_dt_ids, &pdev->dev);
+	const struct mxs_phy_platform_flag *platform_flag = of_id->data;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
@@ -163,6 +209,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
 
 	mxs_phy->clk = clk;
+	mxs_phy->flags = platform_flag->flags;
 
 	platform_set_drvdata(pdev, &mxs_phy->phy);
 
@@ -182,12 +229,6 @@ static int mxs_phy_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id mxs_phy_dt_ids[] = {
-	{ .compatible = "fsl,imx23-usbphy", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);

Re: [PATCH v3 01/11] usb: phy-mxs: Add platform judgement code

[Shawn Guo]

On Tue, Nov 05, 2013 at 09:49:33AM +0800, Peter Chen wrote:
> The mxs-phy has several bugs and features at different
> versions, the driver code can get it through of_device_id.data.
> 
> Signed-off-by: Peter Chen <peter.chen@freescale.com>
> ---
>  drivers/usb/phy/phy-mxs-usb.c |   59 ++++++++++++++++++++++++++++++++++------
>  1 files changed, 50 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index fdd33b4..8b9d80c 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -1,5 +1,5 @@
>  /*
> - * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright 2012-2013 Freescale Semiconductor, Inc.
>   * Copyright (C) 2012 Marek Vasut <marex@denx.de>
>   * on behalf of DENX Software Engineering GmbH
>   *
> @@ -20,6 +20,7 @@
>  #include <linux/delay.h>
>  #include <linux/err.h>
>  #include <linux/io.h>
> +#include <linux/of_device.h>
>  
>  #define DRIVER_NAME "mxs_phy"
>  
> @@ -34,13 +35,55 @@
>  #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
>  #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
>  
> +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
> +
> +/* Do disconnection between PHY and controller without vbus */
> +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS	BIT(0)
> +
> +/*
> + * The PHY will be in messy if there is an wakeup after putting
> + * bus to suspend (set portsc.suspendM) but before setting PHY to low
> + * power mode (set portsc.phcd).
> + */
> +#define MXS_PHY_ABNORAML_IN_SUSPEND		BIT(1)
> +
> +/*
> + * The SOF sends too fast after resuming, it will cause disconnection
> + * between host and high speed device.
> + */
> +#define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
> +
> +struct mxs_phy_platform_flag {
> +	unsigned int flags;
> +};

We should design it as a structure not only for flags but any data that
we may need to define.  That said, mxs_phy_platform_flag is not a good
name to me.  I think mxs_phy_data should be more scalable and future
proof, considering one day we may have more to add into the structure.

> +
> +static const struct mxs_phy_platform_flag imx23_phy_data = {
> +	.flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
> +};
> +
> +static const struct mxs_phy_platform_flag imx6q_phy_data = {
> +	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
> +		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
> +};
> +
> +static const struct mxs_phy_platform_flag imx6sl_phy_data = {
> +	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
> +};
> +
> +static const struct of_device_id mxs_phy_dt_ids[] = {
> +	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
> +	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
> +	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
> +
>  struct mxs_phy {
>  	struct usb_phy phy;
>  	struct clk *clk;
> +	unsigned int flags;

Here, we should have a pointer to struct mxs_phy_data.

Shawn

>  };
>  
> -#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
> -
>  static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
>  {
>  	int ret;
> @@ -131,6 +174,9 @@ static int mxs_phy_probe(struct platform_device *pdev)
>  	struct clk *clk;
>  	struct mxs_phy *mxs_phy;
>  	int ret;
> +	const struct of_device_id *of_id =
> +			of_match_device(mxs_phy_dt_ids, &pdev->dev);
> +	const struct mxs_phy_platform_flag *platform_flag = of_id->data;
>  
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	base = devm_ioremap_resource(&pdev->dev, res);
> @@ -163,6 +209,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
>  	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
>  
>  	mxs_phy->clk = clk;
> +	mxs_phy->flags = platform_flag->flags;
>  
>  	platform_set_drvdata(pdev, &mxs_phy->phy);
>  
> @@ -182,12 +229,6 @@ static int mxs_phy_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static const struct of_device_id mxs_phy_dt_ids[] = {
> -	{ .compatible = "fsl,imx23-usbphy", },
> -	{ /* sentinel */ }
> -};
> -MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
> -
>  static struct platform_driver mxs_phy_driver = {
>  	.probe = mxs_phy_probe,
>  	.remove = mxs_phy_remove,
> -- 
> 1.7.1
> 
> 

Re: [PATCH v3 01/11] usb: phy-mxs: Add platform judgement code

[Peter Chen]

On Tue, Nov 05, 2013 at 10:29:50AM +0800, Shawn Guo wrote:
> On Tue, Nov 05, 2013 at 09:49:33AM +0800, Peter Chen wrote:
> > The mxs-phy has several bugs and features at different
> > versions, the driver code can get it through of_device_id.data.
> > 
> > Signed-off-by: Peter Chen <peter.chen@freescale.com>
> > ---
> >  drivers/usb/phy/phy-mxs-usb.c |   59 ++++++++++++++++++++++++++++++++++------
> >  1 files changed, 50 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> > index fdd33b4..8b9d80c 100644
> > --- a/drivers/usb/phy/phy-mxs-usb.c
> > +++ b/drivers/usb/phy/phy-mxs-usb.c
> > @@ -1,5 +1,5 @@
> >  /*
> > - * Copyright 2012 Freescale Semiconductor, Inc.
> > + * Copyright 2012-2013 Freescale Semiconductor, Inc.
> >   * Copyright (C) 2012 Marek Vasut <marex@denx.de>
> >   * on behalf of DENX Software Engineering GmbH
> >   *
> > @@ -20,6 +20,7 @@
> >  #include <linux/delay.h>
> >  #include <linux/err.h>
> >  #include <linux/io.h>
> > +#include <linux/of_device.h>
> >  
> >  #define DRIVER_NAME "mxs_phy"
> >  
> > @@ -34,13 +35,55 @@
> >  #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
> >  #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
> >  
> > +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
> > +
> > +/* Do disconnection between PHY and controller without vbus */
> > +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS	BIT(0)
> > +
> > +/*
> > + * The PHY will be in messy if there is an wakeup after putting
> > + * bus to suspend (set portsc.suspendM) but before setting PHY to low
> > + * power mode (set portsc.phcd).
> > + */
> > +#define MXS_PHY_ABNORAML_IN_SUSPEND		BIT(1)
> > +
> > +/*
> > + * The SOF sends too fast after resuming, it will cause disconnection
> > + * between host and high speed device.
> > + */
> > +#define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
> > +
> > +struct mxs_phy_platform_flag {
> > +	unsigned int flags;
> > +};
> 
> We should design it as a structure not only for flags but any data that
> we may need to define.  That said, mxs_phy_platform_flag is not a good
> name to me.  I think mxs_phy_data should be more scalable and future
> proof, considering one day we may have more to add into the structure.
> 
> > +
> > +static const struct mxs_phy_platform_flag imx23_phy_data = {
> > +	.flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
> > +};
> > +
> > +static const struct mxs_phy_platform_flag imx6q_phy_data = {
> > +	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
> > +		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
> > +};
> > +
> > +static const struct mxs_phy_platform_flag imx6sl_phy_data = {
> > +	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
> > +};
> > +
> > +static const struct of_device_id mxs_phy_dt_ids[] = {
> > +	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
> > +	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
> > +	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
> > +	{ /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
> > +
> >  struct mxs_phy {
> >  	struct usb_phy phy;
> >  	struct clk *clk;
> > +	unsigned int flags;
> 
> Here, we should have a pointer to struct mxs_phy_data.
> 

Will change both of two names.

Peter

> >  
> > -#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
> > -
> >  static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
> >  {
> >  	int ret;
> > @@ -131,6 +174,9 @@ static int mxs_phy_probe(struct platform_device *pdev)
> >  	struct clk *clk;
> >  	struct mxs_phy *mxs_phy;
> >  	int ret;
> > +	const struct of_device_id *of_id =
> > +			of_match_device(mxs_phy_dt_ids, &pdev->dev);
> > +	const struct mxs_phy_platform_flag *platform_flag = of_id->data;
> >  
> >  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >  	base = devm_ioremap_resource(&pdev->dev, res);
> > @@ -163,6 +209,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
> >  	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
> >  
> >  	mxs_phy->clk = clk;
> > +	mxs_phy->flags = platform_flag->flags;
> >  
> >  	platform_set_drvdata(pdev, &mxs_phy->phy);
> >  
> > @@ -182,12 +229,6 @@ static int mxs_phy_remove(struct platform_device *pdev)
> >  	return 0;
> >  }
> >  
> > -static const struct of_device_id mxs_phy_dt_ids[] = {
> > -	{ .compatible = "fsl,imx23-usbphy", },
> > -	{ /* sentinel */ }
> > -};
> > -MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
> > -
> >  static struct platform_driver mxs_phy_driver = {
> >  	.probe = mxs_phy_probe,
> >  	.remove = mxs_phy_remove,
> > -- 
> > 1.7.1
> > 
> > 

-- 

Best Regards,
Peter Chen

[PATCH v3 04/11] ARM: dts: imx6: add anatop phandle for usbphy

[Peter Chen]

Add anatop phandle for usbphy

Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/boot/dts/imx6qdl.dtsi |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 226ce75..bb79678 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -559,6 +559,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 0x04>;
 				clocks = <&clks 182>;
+				fsl,anatop = <&anatop>;
 			};
 
 			usbphy2: usbphy@020ca000 {
@@ -566,6 +567,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 0x04>;
 				clocks = <&clks 183>;
+				fsl,anatop = <&anatop>;
 			};
 
 			snvs@020cc000 {
-- 
1.7.1


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 04/11] ARM: dts: imx6: add anatop phandle for usbphy

[Shawn Guo]

On Tue, Nov 05, 2013 at 09:49:36AM +0800, Peter Chen wrote:
> Add anatop phandle for usbphy
> 
> Signed-off-by: Peter Chen <peter.chen@freescale.com>
> ---
>  arch/arm/boot/dts/imx6qdl.dtsi |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)

Does imx6sl.dtsi need the same update?

Shawn

> 
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 226ce75..bb79678 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -559,6 +559,7 @@
>  				reg = <0x020c9000 0x1000>;
>  				interrupts = <0 44 0x04>;
>  				clocks = <&clks 182>;
> +				fsl,anatop = <&anatop>;
>  			};
>  
>  			usbphy2: usbphy@020ca000 {
> @@ -566,6 +567,7 @@
>  				reg = <0x020ca000 0x1000>;
>  				interrupts = <0 45 0x04>;
>  				clocks = <&clks 183>;
> +				fsl,anatop = <&anatop>;
>  			};
>  
>  			snvs@020cc000 {
> -- 
> 1.7.1
> 
> 

Re: [PATCH v3 04/11] ARM: dts: imx6: add anatop phandle for usbphy

[Peter Chen]

On Tue, Nov 05, 2013 at 10:41:33AM +0800, Shawn Guo wrote:
> On Tue, Nov 05, 2013 at 09:49:36AM +0800, Peter Chen wrote:
> > Add anatop phandle for usbphy
> > 
> > Signed-off-by: Peter Chen <peter.chen@freescale.com>
> > ---
> >  arch/arm/boot/dts/imx6qdl.dtsi |    2 ++
> >  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> Does imx6sl.dtsi need the same update?
> 

It is needed (for chipidea, it is the same), but I still have
no time to test on it. Will add them later.

Peter

> Shawn
> 
> > 
> > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> > index 226ce75..bb79678 100644
> > --- a/arch/arm/boot/dts/imx6qdl.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> > @@ -559,6 +559,7 @@
> >  				reg = <0x020c9000 0x1000>;
> >  				interrupts = <0 44 0x04>;
> >  				clocks = <&clks 182>;
> > +				fsl,anatop = <&anatop>;
> >  			};
> >  
> >  			usbphy2: usbphy@020ca000 {
> > @@ -566,6 +567,7 @@
> >  				reg = <0x020ca000 0x1000>;
> >  				interrupts = <0 45 0x04>;
> >  				clocks = <&clks 183>;
> > +				fsl,anatop = <&anatop>;
> >  			};
> >  
> >  			snvs@020cc000 {
> > -- 
> > 1.7.1
> > 
> > 

-- 

Best Regards,
Peter Chen

Re: [PATCH v3 04/11] ARM: dts: imx6: add anatop phandle for usbphy

[Shawn Guo]

On Tue, Nov 05, 2013 at 10:53:08AM +0800, Peter Chen wrote:
> On Tue, Nov 05, 2013 at 10:41:33AM +0800, Shawn Guo wrote:
> > On Tue, Nov 05, 2013 at 09:49:36AM +0800, Peter Chen wrote:
> > > Add anatop phandle for usbphy
> > > 
> > > Signed-off-by: Peter Chen <peter.chen@freescale.com>
> > > ---
> > >  arch/arm/boot/dts/imx6qdl.dtsi |    2 ++
> > >  1 files changed, 2 insertions(+), 0 deletions(-)
> > 
> > Does imx6sl.dtsi need the same update?
> > 
> 
> It is needed (for chipidea, it is the same), but I still have
> no time to test on it. Will add them later.

So all "fsl,imx6sl-usbphy" code is untested so far?

Shawn

Re: [PATCH v3 04/11] ARM: dts: imx6: add anatop phandle for usbphy

[Peter Chen]

On Tue, Nov 05, 2013 at 11:16:57AM +0800, Shawn Guo wrote:
> On Tue, Nov 05, 2013 at 10:53:08AM +0800, Peter Chen wrote:
> > On Tue, Nov 05, 2013 at 10:41:33AM +0800, Shawn Guo wrote:
> > > On Tue, Nov 05, 2013 at 09:49:36AM +0800, Peter Chen wrote:
> > > > Add anatop phandle for usbphy
> > > > 
> > > > Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > > > ---
> > > >  arch/arm/boot/dts/imx6qdl.dtsi |    2 ++
> > > >  1 files changed, 2 insertions(+), 0 deletions(-)
> > > 
> > > Does imx6sl.dtsi need the same update?
> > > 
> > 
> > It is needed (for chipidea, it is the same), but I still have
> > no time to test on it. Will add them later.
> 
> So all "fsl,imx6sl-usbphy" code is untested so far?
> 
> Shawn

Yes, "fsl,imx23-usbphy" and "fsl,imx6q-usbphy" have been tested,
I will test imx6sl during this patchset review cycle.

-- 

Best Regards,
Peter Chen

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 08/11] usb: phy-mxs: Enable IC fixes for related SoCs

[Peter Chen]

Some PHY bugs are fixed by IC logic, but these bits are not
enabled by default, so we enable them at driver.

Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 drivers/usb/phy/phy-mxs-usb.c |   32 ++++++++++++++++++++++++++++++--
 1 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index c794011..b7e1744 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -31,6 +31,10 @@
 #define HW_USBPHY_CTRL_SET			0x34
 #define HW_USBPHY_CTRL_CLR			0x38
 
+#define HW_USBPHY_IP				0x90
+#define HW_USBPHY_IP_SET			0x94
+#define HW_USBPHY_IP_CLR			0x98
+
 #define BM_USBPHY_CTRL_SFTRST			BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
@@ -60,6 +64,18 @@
  */
 #define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
 
+/*
+ * IC fix for MXS_PHY_ABNORAML_IN_SUSPEND, bit 17 is the effective bit
+ * in HW_USBPHY_IP.
+ */
+#define MXS_PHY_FIX_ABNORAML_IN_SUSPEND		BIT(17)
+
+/*
+ * IC fix for MXS_PHY_SENDING_SOF_TOO_FAST, bit 18 is the effective bit
+ * in HW_USBPHY_IP.
+ */
+#define MXS_PHY_FIX_SENDING_SOF_TOO_FAST	BIT(18)
+
 struct mxs_phy_platform_flag {
 	unsigned int flags;
 };
@@ -70,11 +86,14 @@ static const struct mxs_phy_platform_flag imx23_phy_data = {
 
 static const struct mxs_phy_platform_flag imx6q_phy_data = {
 	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
-		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+		MXS_PHY_FIX_ABNORAML_IN_SUSPEND,
 };
 
 static const struct mxs_phy_platform_flag imx6sl_phy_data = {
-	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+		MXS_PHY_FIX_ABNORAML_IN_SUSPEND |
+		MXS_PHY_FIX_SENDING_SOF_TOO_FAST,
 };
 
 static const struct of_device_id mxs_phy_dt_ids[] = {
@@ -118,6 +137,15 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 		BM_USBPHY_CTRL_ENUTMILEVEL3,
 	       base + HW_USBPHY_CTRL_SET);
 
+	/* Enable IC solution */
+	if (mxs_phy->flags & MXS_PHY_FIX_ABNORAML_IN_SUSPEND)
+		writel(MXS_PHY_FIX_ABNORAML_IN_SUSPEND,
+			base + HW_USBPHY_IP_SET);
+
+	if (mxs_phy->flags & MXS_PHY_FIX_SENDING_SOF_TOO_FAST)
+		writel(MXS_PHY_FIX_SENDING_SOF_TOO_FAST,
+			base + HW_USBPHY_IP_SET);
+
 	return 0;
 }
 
-- 
1.7.1


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 08/11] usb: phy-mxs: Enable IC fixes for related SoCs

[Michał Mirosław]

2013/11/5 Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
>
> Some PHY bugs are fixed by IC logic, but these bits are not
> enabled by default, so we enable them at driver.
>
> Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  drivers/usb/phy/phy-mxs-usb.c |   32 ++++++++++++++++++++++++++++++--
>  1 files changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index c794011..b7e1744 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -31,6 +31,10 @@
>  #define HW_USBPHY_CTRL_SET                     0x34
>  #define HW_USBPHY_CTRL_CLR                     0x38
>
> +#define HW_USBPHY_IP                           0x90
> +#define HW_USBPHY_IP_SET                       0x94
> +#define HW_USBPHY_IP_CLR                       0x98
> +
>  #define BM_USBPHY_CTRL_SFTRST                  BIT(31)
>  #define BM_USBPHY_CTRL_CLKGATE                 BIT(30)
>  #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS       BIT(26)
> @@ -60,6 +64,18 @@
>   */
>  #define MXS_PHY_SENDING_SOF_TOO_FAST           BIT(2)
>
> +/*
> + * IC fix for MXS_PHY_ABNORAML_IN_SUSPEND, bit 17 is the effective bit
> + * in HW_USBPHY_IP.
> + */
> +#define MXS_PHY_FIX_ABNORAML_IN_SUSPEND                BIT(17)
[...]

s/ABNORAML/ABNORMAL/ ?

Best Regards,
Michał Mirosław
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 08/11] usb: phy-mxs: Enable IC fixes for related SoCs

[Peter Chen]

On Tue, Nov 05, 2013 at 10:02:35PM +0100, Michał Mirosław wrote:
> 2013/11/5 Peter Chen <peter.chen@freescale.com>
> >
> > Some PHY bugs are fixed by IC logic, but these bits are not
> > enabled by default, so we enable them at driver.
> >
> > Signed-off-by: Peter Chen <peter.chen@freescale.com>
> > ---
> >  drivers/usb/phy/phy-mxs-usb.c |   32 ++++++++++++++++++++++++++++++--
> >  1 files changed, 30 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> > index c794011..b7e1744 100644
> > --- a/drivers/usb/phy/phy-mxs-usb.c
> > +++ b/drivers/usb/phy/phy-mxs-usb.c
> > @@ -31,6 +31,10 @@
> >  #define HW_USBPHY_CTRL_SET                     0x34
> >  #define HW_USBPHY_CTRL_CLR                     0x38
> >
> > +#define HW_USBPHY_IP                           0x90
> > +#define HW_USBPHY_IP_SET                       0x94
> > +#define HW_USBPHY_IP_CLR                       0x98
> > +
> >  #define BM_USBPHY_CTRL_SFTRST                  BIT(31)
> >  #define BM_USBPHY_CTRL_CLKGATE                 BIT(30)
> >  #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS       BIT(26)
> > @@ -60,6 +64,18 @@
> >   */
> >  #define MXS_PHY_SENDING_SOF_TOO_FAST           BIT(2)
> >
> > +/*
> > + * IC fix for MXS_PHY_ABNORAML_IN_SUSPEND, bit 17 is the effective bit
> > + * in HW_USBPHY_IP.
> > + */
> > +#define MXS_PHY_FIX_ABNORAML_IN_SUSPEND                BIT(17)
> [...]
> 
> s/ABNORAML/ABNORMAL/ ?
> 

thanks.

-- 

Best Regards,
Peter Chen

[PATCH v3 09/11] usb: phy: Add set_wakeup API

[Peter Chen]

This API is used to set wakeup enable at PHY registers, in that
case, the PHY can be waken up from suspend due to external events,
like vbus change, dp/dm change and id change.

Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 include/linux/usb/phy.h |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index a747960..c6ebe1d 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -111,6 +111,13 @@ struct usb_phy {
 	int	(*set_suspend)(struct usb_phy *x,
 				int suspend);
 
+	/*
+	 * Set wakeup enable for PHY, in that case, the PHY can be
+	 * waken up from suspend status due to external events,
+	 * like vbus change, dp/dm change and id.
+	 */
+	int	(*set_wakeup)(struct usb_phy *x, bool enabled);
+
 	/* notify phy connect status change */
 	int	(*notify_connect)(struct usb_phy *x,
 			enum usb_device_speed speed);
@@ -270,6 +277,15 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend)
 }
 
 static inline int
+usb_phy_set_wakeup(struct usb_phy *x, bool enabled)
+{
+	if (x && x->set_wakeup)
+		return x->set_wakeup(x, enabled);
+	else
+		return 0;
+}
+
+static inline int
 usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed)
 {
 	if (x && x->notify_connect)
-- 
1.7.1


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 02/11] usb: phy-mxs: Add auto clock and power setting

[Peter Chen]

With the auto setting, the PHY's clock and power can be
recovered correctly from low power mode, it is ganranteed by IC logic.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 drivers/usb/phy/phy-mxs-usb.c |   20 +++++++++++++++++---
 1 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 8b9d80c..472fe36 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -31,6 +31,11 @@
 
 #define BM_USBPHY_CTRL_SFTRST			BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
+#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
+#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE	BIT(25)
+#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD	BIT(20)
+#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE	BIT(19)
+#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL		BIT(18)
 #define BM_USBPHY_CTRL_ENUTMILEVEL3		BIT(15)
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
@@ -96,9 +101,18 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 	/* Power up the PHY */
 	writel(0, base + HW_USBPHY_PWD);
 
-	/* enable FS/LS device */
-	writel(BM_USBPHY_CTRL_ENUTMILEVEL2 |
-	       BM_USBPHY_CTRL_ENUTMILEVEL3,
+	/*
+	 * USB PHY Ctrl Setting
+	 * - Auto clock/power on
+	 * - Enable full/low speed support
+	 */
+	writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
+		BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
+		BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
+		BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
+		BM_USBPHY_CTRL_ENAUTO_PWRON_PLL |
+		BM_USBPHY_CTRL_ENUTMILEVEL2 |
+		BM_USBPHY_CTRL_ENUTMILEVEL3,
 	       base + HW_USBPHY_CTRL_SET);
 
 	return 0;
-- 
1.7.1

[PATCH v3 03/11] usb: doc: phy-mxs: update binding for adding anatop phandle

[Peter Chen]

Add anatop phandle which is used to access anatop registers to
control PHY's power and other USB operations.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 Documentation/devicetree/bindings/usb/mxs-phy.txt |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
index 5835b27..e2d5211 100644
--- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
+++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
@@ -4,10 +4,12 @@ Required properties:
 - compatible: Should be "fsl,imx23-usbphy"
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
+- fsl,anatop: phandle for anatop register, it is only for mx6 SoC serial
 
 Example:
 usbphy1: usbphy@020c9000 {
 	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 	reg = <0x020c9000 0x1000>;
 	interrupts = <0 44 0x04>;
+	fsl,anatop = <&anatop>;
 };
-- 
1.7.1

Re: [PATCH v3 03/11] usb: doc: phy-mxs: update binding for adding anatop phandle

[Shawn Guo]

On Tue, Nov 05, 2013 at 09:49:35AM +0800, Peter Chen wrote:
> Add anatop phandle which is used to access anatop registers to
> control PHY's power and other USB operations.
> 
> Signed-off-by: Peter Chen <peter.chen@freescale.com>
> ---
>  Documentation/devicetree/bindings/usb/mxs-phy.txt |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> index 5835b27..e2d5211 100644
> --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
> +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> @@ -4,10 +4,12 @@ Required properties:
>  - compatible: Should be "fsl,imx23-usbphy"

This needs update too, as we now have another two compatible strings.

>  - reg: Should contain registers location and length
>  - interrupts: Should contain phy interrupt
> +- fsl,anatop: phandle for anatop register, it is only for mx6 SoC serial

imx6 SoC series

Shawn

>  
>  Example:
>  usbphy1: usbphy@020c9000 {
>  	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
>  	reg = <0x020c9000 0x1000>;
>  	interrupts = <0 44 0x04>;
> +	fsl,anatop = <&anatop>;
>  };
> -- 
> 1.7.1
> 
> 

Re: [PATCH v3 03/11] usb: doc: phy-mxs: update binding for adding anatop phandle

[Peter Chen]

On Tue, Nov 05, 2013 at 10:34:06AM +0800, Shawn Guo wrote:
> On Tue, Nov 05, 2013 at 09:49:35AM +0800, Peter Chen wrote:
> > Add anatop phandle which is used to access anatop registers to
> > control PHY's power and other USB operations.
> > 
> > Signed-off-by: Peter Chen <peter.chen@freescale.com>
> > ---
> >  Documentation/devicetree/bindings/usb/mxs-phy.txt |    2 ++
> >  1 files changed, 2 insertions(+), 0 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > index 5835b27..e2d5211 100644
> > --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > @@ -4,10 +4,12 @@ Required properties:
> >  - compatible: Should be "fsl,imx23-usbphy"
> 
> This needs update too, as we now have another two compatible strings.
> 

One question, this is needed to change when adding compatible string
to dts or using that compatible string at driver?

> >  - reg: Should contain registers location and length
> >  - interrupts: Should contain phy interrupt
> > +- fsl,anatop: phandle for anatop register, it is only for mx6 SoC serial
> 
> imx6 SoC series
> 

Will change

-- 

Best Regards,
Peter Chen

Re: [PATCH v3 03/11] usb: doc: phy-mxs: update binding for adding anatop phandle

[Shawn Guo]

On Tue, Nov 05, 2013 at 10:50:02AM +0800, Peter Chen wrote:
> On Tue, Nov 05, 2013 at 10:34:06AM +0800, Shawn Guo wrote:
> > On Tue, Nov 05, 2013 at 09:49:35AM +0800, Peter Chen wrote:
> > > Add anatop phandle which is used to access anatop registers to
> > > control PHY's power and other USB operations.
> > > 
> > > Signed-off-by: Peter Chen <peter.chen@freescale.com>
> > > ---
> > >  Documentation/devicetree/bindings/usb/mxs-phy.txt |    2 ++
> > >  1 files changed, 2 insertions(+), 0 deletions(-)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > > index 5835b27..e2d5211 100644
> > > --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > > +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > > @@ -4,10 +4,12 @@ Required properties:
> > >  - compatible: Should be "fsl,imx23-usbphy"
> > 
> > This needs update too, as we now have another two compatible strings.
> > 
> 
> One question, this is needed to change when adding compatible string
> to dts or using that compatible string at driver?

When compatible match table in the driver gets new entries.

Shawn

[PATCH v3 05/11] usb: phy-mxs: Add anatop regmap

[Peter Chen]

It is needed by imx6 SoC serial, but not for imx23 and imx28.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 drivers/usb/phy/phy-mxs-usb.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 472fe36..8cdfbf1 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -21,6 +21,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
 #define DRIVER_NAME "mxs_phy"
 
@@ -87,6 +89,7 @@ struct mxs_phy {
 	struct usb_phy phy;
 	struct clk *clk;
 	unsigned int flags;
+	struct regmap *regmap_anatop;
 };
 
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
@@ -191,6 +194,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	const struct of_device_id *of_id =
 			of_match_device(mxs_phy_dt_ids, &pdev->dev);
 	const struct mxs_phy_platform_flag *platform_flag = of_id->data;
+	struct device_node *np = pdev->dev.of_node;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
@@ -210,6 +214,17 @@ static int mxs_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	/* Some SoCs don't have anatop registers */
+	if (of_get_property(np, "fsl,anatop", NULL)) {
+		mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
+			(np, "fsl,anatop");
+		if (IS_ERR(mxs_phy->regmap_anatop)) {
+			dev_dbg(&pdev->dev,
+				"failed to find regmap for anatop\n");
+			return PTR_ERR(mxs_phy->regmap_anatop);
+		}
+	}
+
 	mxs_phy->phy.io_priv		= base;
 	mxs_phy->phy.dev		= &pdev->dev;
 	mxs_phy->phy.label		= DRIVER_NAME;
-- 
1.7.1

Re: [PATCH v3 05/11] usb: phy-mxs: Add anatop regmap

[Shawn Guo]

On Tue, Nov 05, 2013 at 09:49:37AM +0800, Peter Chen wrote:
> It is needed by imx6 SoC serial, but not for imx23 and imx28.

s/serial/series

Should we have another MXS_PHY_XXX flag for this, so that we can
explicitly check when anatop must be there?

Shawn

> 
> Signed-off-by: Peter Chen <peter.chen@freescale.com>
> ---
>  drivers/usb/phy/phy-mxs-usb.c |   15 +++++++++++++++
>  1 files changed, 15 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index 472fe36..8cdfbf1 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -21,6 +21,8 @@
>  #include <linux/err.h>
>  #include <linux/io.h>
>  #include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
>  
>  #define DRIVER_NAME "mxs_phy"
>  
> @@ -87,6 +89,7 @@ struct mxs_phy {
>  	struct usb_phy phy;
>  	struct clk *clk;
>  	unsigned int flags;
> +	struct regmap *regmap_anatop;
>  };
>  
>  static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
> @@ -191,6 +194,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
>  	const struct of_device_id *of_id =
>  			of_match_device(mxs_phy_dt_ids, &pdev->dev);
>  	const struct mxs_phy_platform_flag *platform_flag = of_id->data;
> +	struct device_node *np = pdev->dev.of_node;
>  
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	base = devm_ioremap_resource(&pdev->dev, res);
> @@ -210,6 +214,17 @@ static int mxs_phy_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  	}
>  
> +	/* Some SoCs don't have anatop registers */
> +	if (of_get_property(np, "fsl,anatop", NULL)) {
> +		mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
> +			(np, "fsl,anatop");
> +		if (IS_ERR(mxs_phy->regmap_anatop)) {
> +			dev_dbg(&pdev->dev,
> +				"failed to find regmap for anatop\n");
> +			return PTR_ERR(mxs_phy->regmap_anatop);
> +		}
> +	}
> +
>  	mxs_phy->phy.io_priv		= base;
>  	mxs_phy->phy.dev		= &pdev->dev;
>  	mxs_phy->phy.label		= DRIVER_NAME;
> -- 
> 1.7.1
> 
> 

Re: [PATCH v3 05/11] usb: phy-mxs: Add anatop regmap

[Peter Chen]

On Tue, Nov 05, 2013 at 10:47:55AM +0800, Shawn Guo wrote:
> On Tue, Nov 05, 2013 at 09:49:37AM +0800, Peter Chen wrote:
> > It is needed by imx6 SoC serial, but not for imx23 and imx28.
> 
> s/serial/series
> 
> Should we have another MXS_PHY_XXX flag for this, so that we can
> explicitly check when anatop must be there?
> 

OK, I will add it, it can let the imx23/28 do not check dts.

> Shawn
> 
> > 
> > Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > ---
> >  drivers/usb/phy/phy-mxs-usb.c |   15 +++++++++++++++
> >  1 files changed, 15 insertions(+), 0 deletions(-)
> > 
> > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> > index 472fe36..8cdfbf1 100644
> > --- a/drivers/usb/phy/phy-mxs-usb.c
> > +++ b/drivers/usb/phy/phy-mxs-usb.c
> > @@ -21,6 +21,8 @@
> >  #include <linux/err.h>
> >  #include <linux/io.h>
> >  #include <linux/of_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/mfd/syscon.h>
> >  
> >  #define DRIVER_NAME "mxs_phy"
> >  
> > @@ -87,6 +89,7 @@ struct mxs_phy {
> >  	struct usb_phy phy;
> >  	struct clk *clk;
> >  	unsigned int flags;
> > +	struct regmap *regmap_anatop;
> >  };
> >  
> >  static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
> > @@ -191,6 +194,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
> >  	const struct of_device_id *of_id =
> >  			of_match_device(mxs_phy_dt_ids, &pdev->dev);
> >  	const struct mxs_phy_platform_flag *platform_flag = of_id->data;
> > +	struct device_node *np = pdev->dev.of_node;
> >  
> >  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >  	base = devm_ioremap_resource(&pdev->dev, res);
> > @@ -210,6 +214,17 @@ static int mxs_phy_probe(struct platform_device *pdev)
> >  		return -ENOMEM;
> >  	}
> >  
> > +	/* Some SoCs don't have anatop registers */
> > +	if (of_get_property(np, "fsl,anatop", NULL)) {
> > +		mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
> > +			(np, "fsl,anatop");
> > +		if (IS_ERR(mxs_phy->regmap_anatop)) {
> > +			dev_dbg(&pdev->dev,
> > +				"failed to find regmap for anatop\n");
> > +			return PTR_ERR(mxs_phy->regmap_anatop);
> > +		}
> > +	}
> > +
> >  	mxs_phy->phy.io_priv		= base;
> >  	mxs_phy->phy.dev		= &pdev->dev;
> >  	mxs_phy->phy.label		= DRIVER_NAME;
> > -- 
> > 1.7.1
> > 
> > 

-- 

Best Regards,
Peter Chen

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 06/11] usb: phy: add notify suspend and resume callback

[Peter Chen]

They are used to notify PHY that the controller enters suspend
or finishes resume.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 include/linux/usb/phy.h |   23 +++++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)

diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 6c0b1c5..a747960 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -116,6 +116,11 @@ struct usb_phy {
 			enum usb_device_speed speed);
 	int	(*notify_disconnect)(struct usb_phy *x,
 			enum usb_device_speed speed);
+	int	(*notify_suspend)(struct usb_phy *x,
+			enum usb_device_speed speed);
+	int	(*notify_resume)(struct usb_phy *x,
+			enum usb_device_speed speed);
+
 };
 
 /**
@@ -282,6 +287,24 @@ usb_phy_notify_disconnect(struct usb_phy *x, enum usb_device_speed speed)
 		return 0;
 }
 
+static inline int usb_phy_notify_suspend
+	(struct usb_phy *x, enum usb_device_speed speed)
+{
+	if (x && x->notify_suspend)
+		return x->notify_suspend(x, speed);
+	else
+		return 0;
+}
+
+static inline int usb_phy_notify_resume
+	(struct usb_phy *x, enum usb_device_speed speed)
+{
+	if (x && x->notify_resume)
+		return x->notify_resume(x, speed);
+	else
+		return 0;
+}
+
 /* notifiers */
 static inline int
 usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
-- 
1.7.1

[PATCH v3 07/11] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume

[Peter Chen]

Implementation of notify_suspend and notify_resume will be different
according to mxs_phy_platform_flag->flags.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 drivers/usb/phy/phy-mxs-usb.c |   54 +++++++++++++++++++++++++++++++++++++---
 1 files changed, 50 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 8cdfbf1..c794011 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -161,8 +161,8 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 static int mxs_phy_on_connect(struct usb_phy *phy,
 		enum usb_device_speed speed)
 {
-	dev_dbg(phy->dev, "%s speed device has connected\n",
-		(speed == USB_SPEED_HIGH) ? "high" : "non-high");
+	dev_dbg(phy->dev, "%s device has connected\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
 
 	if (speed == USB_SPEED_HIGH)
 		writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
@@ -174,8 +174,8 @@ static int mxs_phy_on_connect(struct usb_phy *phy,
 static int mxs_phy_on_disconnect(struct usb_phy *phy,
 		enum usb_device_speed speed)
 {
-	dev_dbg(phy->dev, "%s speed device has disconnected\n",
-		(speed == USB_SPEED_HIGH) ? "high" : "non-high");
+	dev_dbg(phy->dev, "%s device has disconnected\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
 
 	if (speed == USB_SPEED_HIGH)
 		writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
@@ -184,6 +184,48 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy,
 	return 0;
 }
 
+static int mxs_phy_on_suspend(struct usb_phy *phy,
+		enum usb_device_speed speed)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	dev_dbg(phy->dev, "%s device has suspended\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
+
+	/* delay 4ms to wait bus entering idle */
+	usleep_range(4000, 5000);
+
+	if (mxs_phy->flags & MXS_PHY_ABNORAML_IN_SUSPEND) {
+		writel_relaxed(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
+		writel_relaxed(0, phy->io_priv + HW_USBPHY_PWD);
+	}
+
+	if (speed == USB_SPEED_HIGH)
+		writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+				phy->io_priv + HW_USBPHY_CTRL_CLR);
+
+	return 0;
+}
+
+/*
+ * The resume signal must be finished here.
+ */
+static int mxs_phy_on_resume(struct usb_phy *phy,
+		enum usb_device_speed speed)
+{
+	dev_dbg(phy->dev, "%s device has resumed\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
+
+	if (speed == USB_SPEED_HIGH) {
+		/* Make sure the device has switched to High-Speed mode */
+		udelay(500);
+		writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+				phy->io_priv + HW_USBPHY_CTRL_SET);
+	}
+
+	return 0;
+}
+
 static int mxs_phy_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -239,6 +281,10 @@ static int mxs_phy_probe(struct platform_device *pdev)
 
 	mxs_phy->clk = clk;
 	mxs_phy->flags = platform_flag->flags;
+	if (mxs_phy->flags & MXS_PHY_SENDING_SOF_TOO_FAST) {
+		mxs_phy->phy.notify_suspend = mxs_phy_on_suspend;
+		mxs_phy->phy.notify_resume = mxs_phy_on_resume;
+	}
 
 	platform_set_drvdata(pdev, &mxs_phy->phy);
 
-- 
1.7.1

[PATCH v3 10/11] usb: phy-mxs: Add implementation of set_wakeup

[Peter Chen]

When we need the PHY can be waken up by external signals,
we can call this API. Besides, we call mxs_phy_disconnect_line
at this API to close the connection between USB PHY and
controller, after that, the line state from controller is SE0.
Once the PHY is out of power, without calling mxs_phy_disconnect_line,
there are unknown wakeups due to dp/dm floating at device mode.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 drivers/usb/phy/phy-mxs-usb.c |   79 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 79 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index b7e1744..ff8b98c 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -31,6 +31,9 @@
 #define HW_USBPHY_CTRL_SET			0x34
 #define HW_USBPHY_CTRL_CLR			0x38
 
+#define HW_USBPHY_DEBUG_SET			0x54
+#define HW_USBPHY_DEBUG_CLR			0x58
+
 #define HW_USBPHY_IP				0x90
 #define HW_USBPHY_IP_SET			0x94
 #define HW_USBPHY_IP_CLR			0x98
@@ -39,6 +42,9 @@
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
 #define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE	BIT(25)
+#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP		BIT(23)
+#define BM_USBPHY_CTRL_ENIDCHG_WKUP		BIT(22)
+#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP		BIT(21)
 #define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD	BIT(20)
 #define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE	BIT(19)
 #define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL		BIT(18)
@@ -46,6 +52,19 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define BM_USBPHY_DEBUG_CLKGATE			BIT(30)
+
+/* Anatop Registers */
+#define ANADIG_USB1_VBUS_DET_STAT		0x1c0
+
+#define ANADIG_USB1_LOOPBACK_SET		0x1e4
+#define ANADIG_USB1_LOOPBACK_CLR		0x1e8
+
+#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
+
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1	BIT(2)
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN	BIT(5)
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -149,6 +168,48 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 	return 0;
 }
 
+static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
+{
+	void __iomem *base = mxs_phy->phy.io_priv;
+	bool vbus_is_on = false;
+	static bool line_is_disconnected;
+	unsigned int vbus_value = 0;
+
+	/* If the SoCs don't need to disconnect line without vbus, quit */
+	if (!(mxs_phy->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
+		return;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return;
+
+	regmap_read(mxs_phy->regmap_anatop, ANADIG_USB1_VBUS_DET_STAT,
+			&vbus_value);
+	if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
+		vbus_is_on = true;
+
+	if (on && !vbus_is_on) {
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+			base + HW_USBPHY_DEBUG_CLR);
+		regmap_write(mxs_phy->regmap_anatop, ANADIG_USB1_LOOPBACK_SET,
+				BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
+				BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
+		/* Delay some time, and let Linestate be SE0 for controller */
+		usleep_range(500, 1000);
+		line_is_disconnected = true;
+	} else if (line_is_disconnected) {
+		regmap_write(mxs_phy->regmap_anatop, ANADIG_USB1_LOOPBACK_CLR,
+				BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
+				BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+				base + HW_USBPHY_DEBUG_SET);
+		line_is_disconnected = false;
+	}
+
+	dev_dbg(mxs_phy->phy.dev, "line is %s\n", line_is_disconnected
+			? "disconnected" : "connected");
+}
+
 static int mxs_phy_init(struct usb_phy *phy)
 {
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
@@ -186,6 +247,23 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 	return 0;
 }
 
+static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(x);
+	u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
+			BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
+				BM_USBPHY_CTRL_ENIDCHG_WKUP;
+	if (enabled) {
+		mxs_phy_disconnect_line(mxs_phy, true);
+		writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
+	} else {
+		writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
+		mxs_phy_disconnect_line(mxs_phy, false);
+	}
+
+	return 0;
+}
+
 static int mxs_phy_on_connect(struct usb_phy *phy,
 		enum usb_device_speed speed)
 {
@@ -304,6 +382,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	mxs_phy->phy.notify_connect	= mxs_phy_on_connect;
 	mxs_phy->phy.notify_disconnect	= mxs_phy_on_disconnect;
 	mxs_phy->phy.type		= USB_PHY_TYPE_USB2;
+	mxs_phy->phy.set_wakeup		= mxs_phy_set_wakeup;
 
 	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
 
-- 
1.7.1

[PATCH v3 11/11] usb: phy-mxs: Add system suspend/resume API

[Peter Chen]

We need this to keep PHY's power on or off during the system
suspend mode. If we need to enable USB wakeup, then we
must keep PHY's power being on during the system suspend mode.
Otherwise, we need to keep PHY's power being off to save power.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 drivers/usb/phy/phy-mxs-usb.c |   66 +++++++++++++++++++++++++++++++++++++++--
 1 files changed, 63 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index ff8b98c..4588c72 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -55,11 +55,18 @@
 #define BM_USBPHY_DEBUG_CLKGATE			BIT(30)
 
 /* Anatop Registers */
+#define ANADIG_ANA_MISC0			0x150
+#define ANADIG_ANA_MISC0_SET			0x154
+#define ANADIG_ANA_MISC0_CLR			0x158
+
 #define ANADIG_USB1_VBUS_DET_STAT		0x1c0
 
 #define ANADIG_USB1_LOOPBACK_SET		0x1e4
 #define ANADIG_USB1_LOOPBACK_CLR		0x1e8
 
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
+
 #define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
 
 #define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1	BIT(2)
@@ -83,6 +90,15 @@
  */
 #define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
 
+/* imx23 style PHY */
+#define MXS_PHY_IMX23				BIT(3)
+
+/* imx6q style PHY */
+#define MXS_PHY_IMX6Q				BIT(4)
+
+/* imx6sl style PHY */
+#define MXS_PHY_IMX6SL				BIT(5)
+
 /*
  * IC fix for MXS_PHY_ABNORAML_IN_SUSPEND, bit 17 is the effective bit
  * in HW_USBPHY_IP.
@@ -100,19 +116,23 @@ struct mxs_phy_platform_flag {
 };
 
 static const struct mxs_phy_platform_flag imx23_phy_data = {
-	.flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
+	.flags = MXS_PHY_ABNORAML_IN_SUSPEND |
+		MXS_PHY_SENDING_SOF_TOO_FAST |
+		MXS_PHY_IMX23,
 };
 
 static const struct mxs_phy_platform_flag imx6q_phy_data = {
 	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
 		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
-		MXS_PHY_FIX_ABNORAML_IN_SUSPEND,
+		MXS_PHY_FIX_ABNORAML_IN_SUSPEND |
+		MXS_PHY_IMX6Q,
 };
 
 static const struct mxs_phy_platform_flag imx6sl_phy_data = {
 	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
 		MXS_PHY_FIX_ABNORAML_IN_SUSPEND |
-		MXS_PHY_FIX_SENDING_SOF_TOO_FAST,
+		MXS_PHY_FIX_SENDING_SOF_TOO_FAST |
+		MXS_PHY_IMX6SL,
 };
 
 static const struct of_device_id mxs_phy_dt_ids[] = {
@@ -210,6 +230,22 @@ static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
 			? "disconnected" : "connected");
 }
 
+static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
+{
+	unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return;
+
+	if (mxs_phy->flags & MXS_PHY_IMX6Q)
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
+	else if (mxs_phy->flags & MXS_PHY_IMX6SL)
+		regmap_write(mxs_phy->regmap_anatop,
+			reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
+}
+
 static int mxs_phy_init(struct usb_phy *phy)
 {
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
@@ -395,6 +431,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, &mxs_phy->phy);
 
+	device_set_wakeup_capable(&pdev->dev, true);
 	ret = usb_add_phy_dev(&mxs_phy->phy);
 	if (ret)
 		return ret;
@@ -411,6 +448,28 @@ static int mxs_phy_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int mxs_phy_system_suspend(struct device *dev)
+{
+	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
+
+	return 0;
+}
+
+static int mxs_phy_system_resume(struct device *dev)
+{
+	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend, mxs_phy_system_resume);
+
 static struct platform_driver mxs_phy_driver = {
 	.probe = mxs_phy_probe,
 	.remove = mxs_phy_remove,
@@ -418,6 +477,7 @@ static struct platform_driver mxs_phy_driver = {
 		.name = DRIVER_NAME,
 		.owner	= THIS_MODULE,
 		.of_match_table = mxs_phy_dt_ids,
+		.pm = &mxs_phy_pm,
 	 },
 };
 
-- 
1.7.1

Re: [PATCH v3 11/11] usb: phy-mxs: Add system suspend/resume API

[Shawn Guo]

On Tue, Nov 05, 2013 at 09:49:43AM +0800, Peter Chen wrote:
> We need this to keep PHY's power on or off during the system
> suspend mode. If we need to enable USB wakeup, then we
> must keep PHY's power being on during the system suspend mode.
> Otherwise, we need to keep PHY's power being off to save power.
> 
> Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  drivers/usb/phy/phy-mxs-usb.c |   66 +++++++++++++++++++++++++++++++++++++++--
>  1 files changed, 63 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index ff8b98c..4588c72 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -55,11 +55,18 @@
>  #define BM_USBPHY_DEBUG_CLKGATE			BIT(30)
>  
>  /* Anatop Registers */
> +#define ANADIG_ANA_MISC0			0x150
> +#define ANADIG_ANA_MISC0_SET			0x154
> +#define ANADIG_ANA_MISC0_CLR			0x158
> +
>  #define ANADIG_USB1_VBUS_DET_STAT		0x1c0
>  
>  #define ANADIG_USB1_LOOPBACK_SET		0x1e4
>  #define ANADIG_USB1_LOOPBACK_CLR		0x1e8
>  
> +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
> +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
> +
>  #define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
>  
>  #define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1	BIT(2)
> @@ -83,6 +90,15 @@
>   */
>  #define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
>  
> +/* imx23 style PHY */
> +#define MXS_PHY_IMX23				BIT(3)
> +
> +/* imx6q style PHY */
> +#define MXS_PHY_IMX6Q				BIT(4)
> +
> +/* imx6sl style PHY */
> +#define MXS_PHY_IMX6SL				BIT(5)
> +

We will not need these, if we do what I suggested to carry a pointer
to mxs_phy_data in mxs_phy.

struct mxs_phy {
	...
	struct mxs_phy_data *data;
};

The check then can be done like below.

static inline int is_imx6q_phy(struct mxs_phy *mxs_phy)
{
        return mxs_phy->data == &imx6q_phy_data;
}

Shawn

>  /*
>   * IC fix for MXS_PHY_ABNORAML_IN_SUSPEND, bit 17 is the effective bit
>   * in HW_USBPHY_IP.
> @@ -100,19 +116,23 @@ struct mxs_phy_platform_flag {
>  };
>  
>  static const struct mxs_phy_platform_flag imx23_phy_data = {
> -	.flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
> +	.flags = MXS_PHY_ABNORAML_IN_SUSPEND |
> +		MXS_PHY_SENDING_SOF_TOO_FAST |
> +		MXS_PHY_IMX23,
>  };
>  
>  static const struct mxs_phy_platform_flag imx6q_phy_data = {
>  	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
>  		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
> -		MXS_PHY_FIX_ABNORAML_IN_SUSPEND,
> +		MXS_PHY_FIX_ABNORAML_IN_SUSPEND |
> +		MXS_PHY_IMX6Q,
>  };
>  
>  static const struct mxs_phy_platform_flag imx6sl_phy_data = {
>  	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
>  		MXS_PHY_FIX_ABNORAML_IN_SUSPEND |
> -		MXS_PHY_FIX_SENDING_SOF_TOO_FAST,
> +		MXS_PHY_FIX_SENDING_SOF_TOO_FAST |
> +		MXS_PHY_IMX6SL,
>  };
>  
>  static const struct of_device_id mxs_phy_dt_ids[] = {
> @@ -210,6 +230,22 @@ static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
>  			? "disconnected" : "connected");
>  }
>  
> +static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
> +{
> +	unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
> +
> +	/* If the SoCs don't have anatop, quit */
> +	if (!mxs_phy->regmap_anatop)
> +		return;
> +
> +	if (mxs_phy->flags & MXS_PHY_IMX6Q)
> +		regmap_write(mxs_phy->regmap_anatop, reg,
> +			BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
> +	else if (mxs_phy->flags & MXS_PHY_IMX6SL)
> +		regmap_write(mxs_phy->regmap_anatop,
> +			reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
> +}
> +
>  static int mxs_phy_init(struct usb_phy *phy)
>  {
>  	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
> @@ -395,6 +431,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, &mxs_phy->phy);
>  
> +	device_set_wakeup_capable(&pdev->dev, true);
>  	ret = usb_add_phy_dev(&mxs_phy->phy);
>  	if (ret)
>  		return ret;
> @@ -411,6 +448,28 @@ static int mxs_phy_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static int mxs_phy_system_suspend(struct device *dev)
> +{
> +	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
> +
> +	if (device_may_wakeup(dev))
> +		mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
> +
> +	return 0;
> +}
> +
> +static int mxs_phy_system_resume(struct device *dev)
> +{
> +	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
> +
> +	if (device_may_wakeup(dev))
> +		mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
> +
> +	return 0;
> +}
> +
> +SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend, mxs_phy_system_resume);
> +
>  static struct platform_driver mxs_phy_driver = {
>  	.probe = mxs_phy_probe,
>  	.remove = mxs_phy_remove,
> @@ -418,6 +477,7 @@ static struct platform_driver mxs_phy_driver = {
>  		.name = DRIVER_NAME,
>  		.owner	= THIS_MODULE,
>  		.of_match_table = mxs_phy_dt_ids,
> +		.pm = &mxs_phy_pm,
>  	 },
>  };
>  
> -- 
> 1.7.1
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 11/11] usb: phy-mxs: Add system suspend/resume API

[Peter Chen]

On Tue, Nov 05, 2013 at 11:05:15AM +0800, Shawn Guo wrote:
> On Tue, Nov 05, 2013 at 09:49:43AM +0800, Peter Chen wrote:
> > We need this to keep PHY's power on or off during the system
> > suspend mode. If we need to enable USB wakeup, then we
> > must keep PHY's power being on during the system suspend mode.
> > Otherwise, we need to keep PHY's power being off to save power.
> > 
> > Signed-off-by: Peter Chen <peter.chen@freescale.com>
> > ---
> >  drivers/usb/phy/phy-mxs-usb.c |   66 +++++++++++++++++++++++++++++++++++++++--
> >  1 files changed, 63 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> > index ff8b98c..4588c72 100644
> > --- a/drivers/usb/phy/phy-mxs-usb.c
> > +++ b/drivers/usb/phy/phy-mxs-usb.c
> > @@ -55,11 +55,18 @@
> >  #define BM_USBPHY_DEBUG_CLKGATE			BIT(30)
> >  
> >  /* Anatop Registers */
> > +#define ANADIG_ANA_MISC0			0x150
> > +#define ANADIG_ANA_MISC0_SET			0x154
> > +#define ANADIG_ANA_MISC0_CLR			0x158
> > +
> >  #define ANADIG_USB1_VBUS_DET_STAT		0x1c0
> >  
> >  #define ANADIG_USB1_LOOPBACK_SET		0x1e4
> >  #define ANADIG_USB1_LOOPBACK_CLR		0x1e8
> >  
> > +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
> > +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
> > +
> >  #define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
> >  
> >  #define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1	BIT(2)
> > @@ -83,6 +90,15 @@
> >   */
> >  #define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
> >  
> > +/* imx23 style PHY */
> > +#define MXS_PHY_IMX23				BIT(3)
> > +
> > +/* imx6q style PHY */
> > +#define MXS_PHY_IMX6Q				BIT(4)
> > +
> > +/* imx6sl style PHY */
> > +#define MXS_PHY_IMX6SL				BIT(5)
> > +
> 
> We will not need these, if we do what I suggested to carry a pointer
> to mxs_phy_data in mxs_phy.
> 
> struct mxs_phy {
> 	...
> 	struct mxs_phy_data *data;
> };
> 
> The check then can be done like below.
> 
> static inline int is_imx6q_phy(struct mxs_phy *mxs_phy)
> {
>         return mxs_phy->data == &imx6q_phy_data;
> }
> 

What's the benefit compared to current one?

Peter

> Shawn
> 
> >  /*
> >   * IC fix for MXS_PHY_ABNORAML_IN_SUSPEND, bit 17 is the effective bit
> >   * in HW_USBPHY_IP.
> > @@ -100,19 +116,23 @@ struct mxs_phy_platform_flag {
> >  };
> >  
> >  static const struct mxs_phy_platform_flag imx23_phy_data = {
> > -	.flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
> > +	.flags = MXS_PHY_ABNORAML_IN_SUSPEND |
> > +		MXS_PHY_SENDING_SOF_TOO_FAST |
> > +		MXS_PHY_IMX23,
> >  };
> >  
> >  static const struct mxs_phy_platform_flag imx6q_phy_data = {
> >  	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
> >  		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
> > -		MXS_PHY_FIX_ABNORAML_IN_SUSPEND,
> > +		MXS_PHY_FIX_ABNORAML_IN_SUSPEND |
> > +		MXS_PHY_IMX6Q,
> >  };
> >  
> >  static const struct mxs_phy_platform_flag imx6sl_phy_data = {
> >  	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
> >  		MXS_PHY_FIX_ABNORAML_IN_SUSPEND |
> > -		MXS_PHY_FIX_SENDING_SOF_TOO_FAST,
> > +		MXS_PHY_FIX_SENDING_SOF_TOO_FAST |
> > +		MXS_PHY_IMX6SL,
> >  };
> >  
> >  static const struct of_device_id mxs_phy_dt_ids[] = {
> > @@ -210,6 +230,22 @@ static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
> >  			? "disconnected" : "connected");
> >  }
> >  
> > +static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
> > +{
> > +	unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
> > +
> > +	/* If the SoCs don't have anatop, quit */
> > +	if (!mxs_phy->regmap_anatop)
> > +		return;
> > +
> > +	if (mxs_phy->flags & MXS_PHY_IMX6Q)
> > +		regmap_write(mxs_phy->regmap_anatop, reg,
> > +			BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
> > +	else if (mxs_phy->flags & MXS_PHY_IMX6SL)
> > +		regmap_write(mxs_phy->regmap_anatop,
> > +			reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
> > +}
> > +
> >  static int mxs_phy_init(struct usb_phy *phy)
> >  {
> >  	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
> > @@ -395,6 +431,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
> >  
> >  	platform_set_drvdata(pdev, &mxs_phy->phy);
> >  
> > +	device_set_wakeup_capable(&pdev->dev, true);
> >  	ret = usb_add_phy_dev(&mxs_phy->phy);
> >  	if (ret)
> >  		return ret;
> > @@ -411,6 +448,28 @@ static int mxs_phy_remove(struct platform_device *pdev)
> >  	return 0;
> >  }
> >  
> > +static int mxs_phy_system_suspend(struct device *dev)
> > +{
> > +	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
> > +
> > +	if (device_may_wakeup(dev))
> > +		mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
> > +
> > +	return 0;
> > +}
> > +
> > +static int mxs_phy_system_resume(struct device *dev)
> > +{
> > +	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
> > +
> > +	if (device_may_wakeup(dev))
> > +		mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
> > +
> > +	return 0;
> > +}
> > +
> > +SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend, mxs_phy_system_resume);
> > +
> >  static struct platform_driver mxs_phy_driver = {
> >  	.probe = mxs_phy_probe,
> >  	.remove = mxs_phy_remove,
> > @@ -418,6 +477,7 @@ static struct platform_driver mxs_phy_driver = {
> >  		.name = DRIVER_NAME,
> >  		.owner	= THIS_MODULE,
> >  		.of_match_table = mxs_phy_dt_ids,
> > +		.pm = &mxs_phy_pm,
> >  	 },
> >  };
> >  
> > -- 
> > 1.7.1
> > 
> > 

-- 

Best Regards,
Peter Chen

Re: [PATCH v3 11/11] usb: phy-mxs: Add system suspend/resume API

[Shawn Guo]

On Tue, Nov 05, 2013 at 10:59:17AM +0800, Peter Chen wrote:
> > > @@ -83,6 +90,15 @@
> > >   */
> > >  #define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
> > >  
> > > +/* imx23 style PHY */
> > > +#define MXS_PHY_IMX23				BIT(3)
> > > +
> > > +/* imx6q style PHY */
> > > +#define MXS_PHY_IMX6Q				BIT(4)
> > > +
> > > +/* imx6sl style PHY */
> > > +#define MXS_PHY_IMX6SL				BIT(5)
> > > +
> > 
> > We will not need these, if we do what I suggested to carry a pointer
> > to mxs_phy_data in mxs_phy.
> > 
> > struct mxs_phy {
> > 	...
> > 	struct mxs_phy_data *data;
> > };
> > 
> > The check then can be done like below.
> > 
> > static inline int is_imx6q_phy(struct mxs_phy *mxs_phy)
> > {
> >         return mxs_phy->data == &imx6q_phy_data;
> > }
> > 
> 
> What's the benefit compared to current one?

Save those pointless flags.

Shawn