From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: [PATCH 01/13] dma: ste_dma40: Expand DT binding to accept 'high-priority channel' flag Date: Wed, 6 Nov 2013 10:16:13 +0000 Message-ID: <1383732985-18928-2-git-send-email-lee.jones@linaro.org> References: <1383732985-18928-1-git-send-email-lee.jones@linaro.org> Return-path: In-Reply-To: <1383732985-18928-1-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: linus.walleij@linaro.org, Lee Jones , devicetree@vger.kernel.org, Vinod Koul List-Id: devicetree@vger.kernel.org This is used for MSP (audio) devices which is about to be fully DT:ed. Cc: devicetree@vger.kernel.org Cc: Vinod Koul Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/dma/ste-dma40.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index a8c21c2..1f5729f 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -50,6 +50,9 @@ Each dmas request consists of 4 cells: 0x00000008: Use fixed channel: Use automatic channel selection when unset Use DMA request line number when set + 0x00000010: Set channel as high priority: + Normal priority when unset + High priority when set Example: -- 1.8.1.2