[PATCHv2 3/7] arm: dts: dra7: add bandgap entry

[Eduardo Valentin <eduardo.valentin@ti.com>]

This patch adds bandgap IP entry on DRA7 dtsi device tree file.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
---
Hi all,

Difference from V1: now the BG node belongs to OCP.

Tero, this is the patch you were asking for.

Thanks,

Eduardo

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 3a746c2..d3d467b 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -102,6 +102,18 @@
 			pinctrl-single,function-mask = <0x3fffffff>;
 		};
 
+		bandgap: bandgap {
+			reg = <0x4a0021e0 0xc
+				0x4a00232c 0xc
+				0x4a002380 0x2c
+				0x4a0023C0 0x3c
+				0x4a002564 0x8
+				0x4a002574 0x50>;
+			compatible = "ti,dra752-bandgap";
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
-- 
1.8.2.1.342.gfa7285d