[PATCH v7 0/7] pinctrl: imx27: imx27 pincontrol driver

[Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

Hi,

This series contains only DTS changes for imx27-pinctrl. It depends on the
incremental driver patch which allows iomux subdevices [1].

Regards,

Markus Pargmann


[1] [PATCH] pinctrl: imx1-core populate subdevices
    <1384193987-20740-1-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
    http://thread.gmane.org/gmane.linux.drivers.devicetree/51584

Changes in v7:
 - Added patch for imx27-pingrp.h
 - Pin nodes moved to board dts files
 - gpio nodes in imx27.dtsi moved to iomux node

Markus Pargmann (7):
  ARM: dts: imx27 pin functions
  ARM: dts: imx27 pingroups
  ARM: dts: imx27 pinctrl
  ARM: dts: imx27 phyCARD-S pinctrl
  ARM: dts: imx27 phycore move uart1 to rdk
  ARM: dts: imx27 phycore pinctrl
  ARM: imx27: enable pinctrl

 arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts |  43 ++
 arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts |  16 +
 arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts   |  23 +
 arch/arm/boot/dts/imx27-phytec-phycore-som.dts   |  20 +-
 arch/arm/boot/dts/imx27-pinfunc.h                | 526 +++++++++++++++++++++++
 arch/arm/boot/dts/imx27-pingrp.h                 |  71 +++
 arch/arm/boot/dts/imx27.dtsi                     | 125 +++---
 arch/arm/mach-imx/Kconfig                        |   2 +
 8 files changed, 764 insertions(+), 62 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx27-pinfunc.h
 create mode 100644 arch/arm/boot/dts/imx27-pingrp.h

-- 
1.8.4.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html