From: Alex Ling <kasimling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Alex Ling <kasimling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board
Date: Tue, 12 Nov 2013 23:02:52 +0800 [thread overview]
Message-ID: <1384268572-27055-1-git-send-email-kasimling@gmail.com> (raw)
Add a minimal board dts file for EXYNOS4412 based FriendlyARM's
TINY4412 board. This patch including adds the node to support
peripherals like UART, SD card on SDMMC2 port, and this patch
adds GPIO connected LEDS and configure its properties like
following:
LED1: use 'heartbeat' trigger, blinking while the board is running.
LED4: use 'mmc0' trigger, on when mmc0 is accessing.
LED2 and LED3 can be controlled from userspace.
Signed-off-by: Alex Ling <kasimling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos4412-tiny4412.dts | 89 +++++++++++++++++++++++++++++
2 files changed, 90 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos4412-tiny4412.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 802720e..91671a2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -59,6 +59,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4412-odroidx.dtb \
exynos4412-origen.dtb \
exynos4412-smdk4412.dtb \
+ exynos4412-tiny4412.dtb \
exynos4412-trats2.dtb \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
new file mode 100644
index 0000000..78ace14
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -0,0 +1,89 @@
+/*
+ * FriendlyARM's Exynos4412 based TINY4412 board device tree source
+ *
+ * Copyright (c) 2013 Alex Ling <kasimling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * Device tree source file for FriendlyARM's TINY4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+ model = "FriendlyARM TINY4412 board based on Exynos4412";
+ compatible = "friendlyarm,tiny4412", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "led1:heart";
+ gpios = <&gpm4 0 1>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+ led2 {
+ label = "led2";
+ gpios = <&gpm4 1 1>;
+ default-state = "off";
+ };
+ led3 {
+ label = "led3";
+ gpios = <&gpm4 2 1>;
+ default-state = "off";
+ };
+ led4 {
+ label = "led4:mmc0";
+ gpios = <&gpm4 3 1>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ rtc@10070000 {
+ status = "okay";
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2013-11-12 15:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-12 15:02 Alex Ling [this message]
2013-11-12 19:13 ` ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board Rob Herring
2013-11-13 5:20 ` kasim ling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384268572-27055-1-git-send-email-kasimling@gmail.com \
--to=kasimling-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).