From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sebastian Reichel Subject: [PATCH 2/2] dt: binding documentation for isp1704 charger Date: Thu, 14 Nov 2013 12:38:54 +0000 Message-ID: <1384432734-1490-2-git-send-email-sre@debian.org> References: <1384432734-1490-1-git-send-email-sre@debian.org> Return-path: In-Reply-To: <1384432734-1490-1-git-send-email-sre@debian.org> Sender: linux-kernel-owner@vger.kernel.org To: Sebastian Reichel , Tony Lindgren , Anton Vorontsov Cc: David Woodhouse , Grant Likely , Rob Herring , Pawel Moll , Mark Rutland , Stephen Warren , Ian Campbell , linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, =?UTF-8?q?Pali=20Roh=C3=A1r?= List-Id: devicetree@vger.kernel.org Add devicetree binding documentation for isp1704-charger. Signed-off-by: Sebastian Reichel --- Documentation/devicetree/bindings/power/isp1704.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/isp1704.txt diff --git a/Documentation/devicetree/bindings/power/isp1704.txt b/Documentation/devicetree/bindings/power/isp1704.txt new file mode 100644 index 0000000..bbeec11 --- /dev/null +++ b/Documentation/devicetree/bindings/power/isp1704.txt @@ -0,0 +1,17 @@ +Binding for NXP ISP1704 USB Charger Detection + +Required properties: +- compatible: Should contain one of the following: + * "nxp,isp1704" +- nxp,enable-gpio: Should contain a phandle to the + GPIO pin connected to the chip's enable pin. +- usb-phy: Should contain a phandle to the USB PHY + the ISP1704 is connected to. + +Example: + +isp1704 { + compatible = "nxp,isp1704"; + nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; + usb-phy = <&usb2_phy>; +}; -- 1.8.4.2