From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org
Cc: devicetree@vger.kernel.org, "Benoît Cousson" <bcousson@baylibre.com>
Subject: [PATCH 01/11] ARM: dts: Add basic device tree support for omap2430 sdp
Date: Thu, 14 Nov 2013 16:09:48 -0800 [thread overview]
Message-ID: <1384474198-20756-2-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1384474198-20756-1-git-send-email-tony@atomide.com>
I doubt that there are many people using 2430 sdp, but as
that's been historically an important acid test platform
for omap2+ related changes, let's add minimal device
tree support for it.
If anybody is using it beyond minimal boot testing, patches
for more complete device tree support are welcome.
Cc: devicetree@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap2430-sdp.dts | 49 ++++++++++++++++++++++++++++++++++++++
2 files changed, 50 insertions(+)
create mode 100644 arch/arm/boot/dts/omap2430-sdp.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d57c1a6..73022b1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
nspire-tp.dtb \
nspire-clp.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+ omap2430-sdp.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
omap3-devkit8000.dtb \
diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts
new file mode 100644
index 0000000..2c90d29
--- /dev/null
+++ b/arch/arm/boot/dts/omap2430-sdp.dts
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap2430.dtsi"
+
+/ {
+ model = "TI OMAP2430 SDP";
+ compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ };
+};
+
+#include "twl4030.dtsi"
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+};
+
+&gpmc {
+ ranges = <5 0 0x08000000 0x01000000>;
+ ethernet@gpmc {
+ compatible = "smsc,lan91c94";
+ interrupt-parent = <&gpio5>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */
+ reg = <5 0x300 0xf>;
+ bank-width = <2>;
+ gpmc,mux-add-data;
+ };
+};
+
--
1.8.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next parent reply other threads:[~2013-11-15 0:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1384474198-20756-1-git-send-email-tony@atomide.com>
2013-11-15 0:09 ` Tony Lindgren [this message]
2013-11-15 0:09 ` [PATCH 02/11] ARM: dts: Add basic Nokia N8X0 support Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384474198-20756-2-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).