From: Leela Krishna Amudala <l.krishna@samsung.com>
To: linux-samsung-soc@vger.kernel.org, kgene.kim@samsung.com, wim@iguana.be
Cc: t.figa@samsung.com, devicetree@vger.kernel.org,
dianders@chromium.org, linux-watchdog@vger.kernel.org,
cpgs@samsung.com, sachin.kamat@linaro.org, linux@roeck-us.net
Subject: [PATCH V9 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
Date: Mon, 18 Nov 2013 15:19:47 +0530 [thread overview]
Message-ID: <1384768189-2839-2-git-send-email-l.krishna@samsung.com> (raw)
In-Reply-To: <1384768189-2839-1-git-send-email-l.krishna@samsung.com>
This patch adds pmusysreg node to exynos5250 and exynos5420 dtsi files to
handle PMU register accesses in a centralized way using syscon driver
Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
Documentation/devicetree/bindings/arm/samsung/pmu.txt | 16 ++++++++++++++++
arch/arm/boot/dts/exynos5250.dtsi | 5 +++++
arch/arm/boot/dts/exynos5420.dtsi | 5 +++++
3 files changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
new file mode 100644
index 0000000..307e727
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -0,0 +1,16 @@
+SAMSUNG Exynos SoC series PMU Registers
+
+Properties:
+ - name : should be 'syscon';
+ - compatible : should contain two values. First value must be one from following list:
+ - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+ - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
+ second value must be always "syscon".
+
+ - reg : offset and length of the register set.
+
+Example :
+pmu_syscon: syscon@10040000 {
+ compatible = "samsung,exynos5250-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index c4a8662..6056a83 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -158,6 +158,11 @@
interrupts = <0 47 0>;
};
+ pmu_syscon: syscon@10040000 {
+ compatible = "samsung,exynos5250-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+ };
+
watchdog {
clocks = <&clock 336>;
clock-names = "watchdog";
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 6ffefd1..39ce15a 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -369,4 +369,9 @@
clock-names = "gscl";
samsung,power-domain = <&gsc_pd>;
};
+
+ pmu_syscon: syscon@10040000 {
+ compatible = "samsung,exynos5420-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+ };
};
--
1.7.10.4
next prev parent reply other threads:[~2013-11-18 9:49 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-18 9:49 [PATCH V9 0/3] Add watchdog DT nodes and use syscon regmap interface to configure pmu registers Leela Krishna Amudala
2013-11-18 9:49 ` Leela Krishna Amudala [this message]
2013-11-25 22:24 ` [PATCH V9 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files Doug Anderson
2013-11-18 9:49 ` [PATCH V9 2/3] watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register Leela Krishna Amudala
2013-11-18 16:42 ` Guenter Roeck
2013-11-19 4:36 ` Leela Krishna Amudala
2013-11-19 5:00 ` Guenter Roeck
2013-11-19 5:26 ` Leela Krishna Amudala
2013-11-19 7:02 ` Guenter Roeck
2013-11-25 22:44 ` Doug Anderson
2013-11-26 0:12 ` Tomasz Figa
2013-11-26 12:31 ` Leela Krishna Amudala
2013-11-18 9:49 ` [PATCH V9 3/3] ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420 Leela Krishna Amudala
[not found] ` <1384768189-2839-4-git-send-email-l.krishna-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-11-25 22:46 ` Doug Anderson
2013-11-18 11:05 ` [PATCH V9 0/3] Add watchdog DT nodes and use syscon regmap interface to configure pmu registers Tomasz Figa
2013-11-21 5:19 ` Leela Krishna Amudala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384768189-2839-2-git-send-email-l.krishna@samsung.com \
--to=l.krishna@samsung.com \
--cc=cpgs@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=sachin.kamat@linaro.org \
--cc=t.figa@samsung.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).