From: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Matt Sealey <neko-HhXTZounMxbZATc7fWT8Dg@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [PATCH v8 4/4] ARM: dts: imx27 phycore pinctrl
Date: Wed, 20 Nov 2013 09:45:51 +0100 [thread overview]
Message-ID: <1384937151-11160-5-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1384937151-11160-1-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Add pinctrl nodes and properties for phycore device nodes.
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 22 ++++++++++++++++++++++
arch/arm/boot/dts/imx27-phytec-phycore-som.dts | 16 ++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index ad76d88..e792469 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -19,6 +19,24 @@
cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
};
+&iomuxc {
+ imx27_phycore_rdk {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_UART1_PINGRP1
+ MX27_UART1_RTSCTS_PINGRP1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX27_UART2_PINGRP1
+ MX27_UART2_RTSCTS_PINGRP1
+ >;
+ };
+ };
+};
+
&sdhci2 {
bus-width = <4>;
cd-gpios = <&gpio3 29 0>;
@@ -29,11 +47,15 @@
&uart1 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
index 648541a..56960c7 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
@@ -135,11 +135,15 @@
&fec {
phy-reset-gpios = <&gpio3 30 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&i2c2 {
clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
at24@52 {
@@ -159,6 +163,18 @@
};
};
+&iomuxc {
+ imx27_phycard_s_som {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <MX27_FEC1_PINGRP1>;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <MX27_I2C2_PINGRP1>;
+ };
+ };
+};
+
&nfc {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-11-20 8:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-20 8:45 [PATCH v8 0/4] pinctrl: imx27: imx27 pincontrol driver Markus Pargmann
[not found] ` <1384937151-11160-1-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-11-20 8:45 ` [PATCH v8 1/4] ARM: dts: imx27 iomux device node Markus Pargmann
2013-11-20 8:45 ` [PATCH v8 2/4] ARM: dts: imx27 phyCARD-S pinctrl Markus Pargmann
2013-11-20 8:45 ` [PATCH v8 3/4] ARM: dts: imx27 phycore move uart1 to rdk Markus Pargmann
2013-11-20 8:45 ` Markus Pargmann [this message]
2013-11-20 12:40 ` [PATCH v8 0/4] pinctrl: imx27: imx27 pincontrol driver Shawn Guo
[not found] ` <20131120124025.GB22308-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2013-11-25 14:25 ` Linus Walleij
[not found] ` <CACRpkdY9bh9gG2XO7vFJsL=E3VxnBHkf1qaQUKuCeYAinktkHQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-11-26 2:43 ` Shawn Guo
2013-11-26 2:43 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384937151-11160-5-git-send-email-mpa@pengutronix.de \
--to=mpa-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=neko-HhXTZounMxbZATc7fWT8Dg@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).