From: Loc Ho <lho@apm.com>
To: olof@lixom.net, tj@kernel.org, arnd@arndb.de
Cc: linux-scsi@vger.kernel.org, linux-ide@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
jcm@redhat.com, patches@apm.com, Loc Ho <lho@apm.com>,
Tuan Phan <tphan@apm.com>, Suman Tripathi <stripathi@apm.com>
Subject: [PATCH v5 4/4] arm64: Add APM X-Gene SoC SATA host controller DTS entries
Date: Tue, 26 Nov 2013 00:01:25 -0700 [thread overview]
Message-ID: <1385449285-30764-5-git-send-email-lho@apm.com> (raw)
In-Reply-To: <1385449285-30764-4-git-send-email-lho@apm.com>
arm64: Add APM X-Gene SoC SATA host controller and clock DTS entries
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Tuan Phan <tphan@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
---
arch/arm64/boot/dts/apm-storm.dtsi | 81 ++++++++++++++++++++++++++++++++++++
1 files changed, 81 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
index f74c26a..fd8ff25 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -176,6 +176,51 @@
reg-names = "csr-reg";
clock-output-names = "eth8clk";
};
+
+ sata01clk: sata01clk@1f21c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "sata01clk";
+ reg = <0x0 0x1f21c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata01clk";
+ status = "disabled";
+ csr-offset = <0x4>;
+ csr-mask = <0x3f>;
+ enable-offset = <0x0>;
+ enable-mask = <0x3f>;
+ };
+
+ sata23clk: sata23clk@1f22c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "sata23clk";
+ reg = <0x0 0x1f22c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata23clk";
+ status = "ok";
+ csr-offset = <0x4>;
+ csr-mask = <0x3f>;
+ enable-offset = <0x0>;
+ enable-mask = <0x3f>;
+ };
+
+ sata45clk: sata45clk@1f23c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "sata45clk";
+ reg = <0x0 0x1f23c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata45clk";
+ status = "ok";
+ csr-offset = <0x4>;
+ csr-mask = <0x3f>;
+ enable-offset = <0x0>;
+ enable-mask = <0x3f>;
+ };
};
serial0: serial@1c020000 {
@@ -224,5 +269,41 @@
apm-tx-boost-gain = <0x3 0x3 0x3 0x3 0x3 0x3>;
apm-tx-eye-tuning = <0xa 0xa 0xa 0xc 0xc 0xc>;
};
+
+ sata1: sata@1a000000 {
+ compatible = "apm,xgene-ahci-sgmii";
+ reg = <0x0 0x1a000000 0x0 0x1000>,
+ <0x0 0x1f210000 0x0 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x86 0x4>;
+ status = "disabled";
+ clocks = <&sata01clk 0>;
+ phys = <&phy1 0>;
+ phy-names = "sata-6g";
+ };
+
+ sata2: sata@1a400000 {
+ compatible = "apm,xgene-ahci-sgmii";
+ reg = <0x0 0x1a400000 0x0 0x1000>,
+ <0x0 0x1f220000 0x0 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x87 0x4>;
+ status = "ok";
+ clocks = <&sata23clk 0>;
+ phys = <&phy2 0>;
+ phy-names = "sata-6g";
+ };
+
+ sata3: sata@1a800000 {
+ compatible = "apm,xgene-ahci-pcie";
+ reg = <0x0 0x1a800000 0x0 0x1000>,
+ <0x0 0x1f230000 0x0 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x88 0x4>;
+ status = "ok";
+ clocks = <&sata45clk 0>;
+ phys = <&phy3 0>;
+ phy-names = "sata-6g";
+ };
};
};
--
1.5.5
next prev parent reply other threads:[~2013-11-26 7:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-26 7:01 [PATCH v5 0/4] ata: Add APM X-Gene SoC SATA host controller support Loc Ho
2013-11-26 7:01 ` [PATCH v5 1/4] ata: Export required functions by APM X-Gene SATA driver Loc Ho
2013-11-26 7:01 ` [PATCH v5 2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding Loc Ho
2013-11-26 7:01 ` [PATCH v5 3/4] ata: Add APM X-Gene SoC SATA host controller driver Loc Ho
2013-11-26 7:01 ` Loc Ho [this message]
2013-11-26 14:55 ` [PATCH v5 2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding Mark Rutland
2013-11-26 22:04 ` Loc Ho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385449285-30764-5-git-send-email-lho@apm.com \
--to=lho@apm.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=jcm@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=olof@lixom.net \
--cc=patches@apm.com \
--cc=stripathi@apm.com \
--cc=tj@kernel.org \
--cc=tphan@apm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).