From: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
To: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
"Denis Carikli" <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>,
"Rob Herring"
<rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
"Pawel Moll" <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Stephen Warren"
<swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
"Ian Campbell"
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
"Grant Likely"
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Sascha Hauer" <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Eric Bénard" <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.
Date: Wed, 27 Nov 2013 16:27:44 +0100 [thread overview]
Message-ID: <1385566064-30761-1-git-send-email-denis@eukrea.com> (raw)
The following devices/functionalities were added:
* Main and secondary UARTs.
* i2c and the pcf8563 device.
* Ethernet.
* NAND.
* The BP1 button.
* The LED.
* Watchdog.
* SD.
* USB host.
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi | 81 +++++++++++++++
.../boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts | 106 ++++++++++++++++++++
2 files changed, 187 insertions(+)
create mode 100644 arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
create mode 100644 arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts
diff --git a/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi b/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
new file mode 100644
index 0000000..cb40cf3
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx53.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX53";
+ compatible = "eukrea,cpuimx53", "fsl,imx53";
+
+ memory {
+ reg = <0x70000000 0x20000000>; /* 512M */
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-reset-gpios = <&gpio2 30 1>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-eukrea {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX53_PAD_EIM_EB2__GPIO2_30 0x1e4
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <MX53_FEC_PINGRP1>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX53_I2C1_PINGRP1>;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <MX53_NAND_PINGRP1>;
+
+ };
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ status = "okay";
+};
+
+&usbh1 {
+ phy_type = "utmi";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts b/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts
new file mode 100644
index 0000000..95929aa
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts
@@ -0,0 +1,106 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "imx53-eukrea-cpuimx53.dtsi"
+
+/ {
+ model = "Eukrea MBIMX53SD";
+ compatible = "eukrea,mbimxsd53","eukrea,cpuimx53", "fsl,imx53";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+
+ button-1 {
+ label = "BP1";
+ gpios = <&gpio4 14 1>;
+ linux,code = <256>;
+ gpio-key,wakeup;
+ linux,input-type = <1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioled>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio4 15 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+ cd-gpios = <&gpio5 17 1>;
+ vqmmc-supply = <®_3p3v>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx53-eukrea {
+ pinctrl_esdhc1: esdhc1 {
+ fsl,pins = <MX53_ESDHC1_PINGRP1>;
+ };
+
+ pinctrl_esdhc1_cd: esdhc1_cd {
+ fsl,pins = <MX53_PAD_DISP0_DAT23__GPIO5_17 0x80000000>;
+ };
+
+ pinctrl_gpiokeys: gpiokeysgrp {
+ fsl,pins = <MX53_PAD_KEY_COL4__GPIO4_14 0x80000000>;
+ };
+
+ pinctrl_gpioled: gpioledgrp {
+ fsl,pins = <MX53_PAD_KEY_ROW4__GPIO4_15 0x80000000>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <MX53_UART1_PINGRP2>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX53_UART2_PINGRP2>;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2013-11-27 15:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-27 15:27 Denis Carikli [this message]
[not found] ` <1385566064-30761-1-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-11-28 5:58 ` [PATCH] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385566064-30761-1-git-send-email-denis@eukrea.com \
--to=denis-fo0siakyzcbqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).