From: Sebastian Reichel <sre@debian.org>
To: Sebastian Reichel <sre@debian.org>,
Tony Lindgren <tony@atomide.com>,
Anton Vorontsov <anton@enomsg.org>
Cc: "David Woodhouse" <dwmw2@infradead.org>,
"Grant Likely" <grant.likely@linaro.org>,
"Rob Herring" <rob.herring@calxeda.com>,
"Pawel Moll" <pawel.moll@arm.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Stephen Warren" <swarren@wwwdotorg.org>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, "Pali Rohár" <pali.rohar@gmail.com>
Subject: [PATCHv2 1/2] isp1704_charger: Add DT support
Date: Sun, 1 Dec 2013 02:00:10 +0100 [thread overview]
Message-ID: <1385859611-26532-2-git-send-email-sre@debian.org> (raw)
In-Reply-To: <1385859611-26532-1-git-send-email-sre@debian.org>
This patch introduces device tree support to the isp1704
charger driver. Adding support involved moving the handling
of the enable GPIO from board code into the driver.
Signed-off-by: Sebastian Reichel <sre@debian.org>
---
drivers/power/isp1704_charger.c | 55 ++++++++++++++++++++++++++++++++---
include/linux/power/isp1704_charger.h | 1 +
2 files changed, 52 insertions(+), 4 deletions(-)
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c
index 1bb3a91..2535989 100644
--- a/drivers/power/isp1704_charger.c
+++ b/drivers/power/isp1704_charger.c
@@ -29,6 +29,8 @@
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -88,6 +90,8 @@ static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on)
if (board && board->set_power)
board->set_power(on);
+ else if (board)
+ gpio_set_value(board->enable_gpio, on);
}
/*
@@ -400,12 +404,47 @@ static int isp1704_charger_probe(struct platform_device *pdev)
struct isp1704_charger *isp;
int ret = -ENODEV;
+ struct isp1704_charger_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
+
+ if (np) {
+ int gpio = of_get_named_gpio(np, "nxp,enable-gpio", 0);
+
+ if (gpio < 0)
+ return gpio;
+
+ pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct isp1704_charger_data), GFP_KERNEL);
+ pdata->enable_gpio = gpio;
+
+ dev_info(&pdev->dev, "init gpio %d\n", pdata->enable_gpio);
+
+ ret = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
+ GPIOF_OUT_INIT_HIGH, "isp1704_reset");
+ if (ret)
+ goto fail0;
+ }
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "missing platform data!\n");
+ return -ENODEV;
+ }
+
+
isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL);
if (!isp)
return -ENOMEM;
- isp->phy = usb_get_phy(USB_PHY_TYPE_USB2);
- if (IS_ERR_OR_NULL(isp->phy))
+ if (np)
+ isp->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
+ else
+ isp->phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+
+ if (IS_ERR(isp->phy)) {
+ ret = PTR_ERR(isp->phy);
+ goto fail0;
+ }
+ if (!isp->phy)
goto fail0;
isp->dev = &pdev->dev;
@@ -464,7 +503,6 @@ fail2:
power_supply_unregister(&isp->psy);
fail1:
isp1704_charger_set_power(isp, 0);
- usb_put_phy(isp->phy);
fail0:
dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret);
@@ -477,15 +515,24 @@ static int isp1704_charger_remove(struct platform_device *pdev)
usb_unregister_notifier(isp->phy, &isp->nb);
power_supply_unregister(&isp->psy);
- usb_put_phy(isp->phy);
isp1704_charger_set_power(isp, 0);
return 0;
}
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_isp1704_of_match[] = {
+ { .compatible = "nxp,isp1704", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_isp1704_of_match);
+#endif
+
static struct platform_driver isp1704_charger_driver = {
.driver = {
.name = "isp1704_charger",
+ .of_match_table = of_match_ptr(omap_isp1704_of_match),
},
.probe = isp1704_charger_probe,
.remove = isp1704_charger_remove,
diff --git a/include/linux/power/isp1704_charger.h b/include/linux/power/isp1704_charger.h
index 68096a6..0105d9e 100644
--- a/include/linux/power/isp1704_charger.h
+++ b/include/linux/power/isp1704_charger.h
@@ -24,6 +24,7 @@
struct isp1704_charger_data {
void (*set_power)(bool on);
+ int enable_gpio;
};
#endif
--
1.8.4.3
next prev parent reply other threads:[~2013-12-01 1:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-14 12:38 [PATCH 1/2] isp1704_charger: Add DT support Sebastian Reichel
2013-11-14 12:38 ` [PATCH 2/2] dt: binding documentation for isp1704 charger Sebastian Reichel
2013-11-15 11:26 ` Mark Rutland
[not found] ` <1384432734-1490-1-git-send-email-sre-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
2013-11-14 17:52 ` [PATCH 1/2] isp1704_charger: Add DT support Tony Lindgren
2013-12-01 1:00 ` [PATCHv2 0/2] DT support for isp1704-charger Sebastian Reichel
2013-12-01 1:00 ` Sebastian Reichel [this message]
2013-12-01 1:00 ` [PATCHv2 2/2] dt: binding documentation for isp1704 charger Sebastian Reichel
2013-12-24 2:35 ` [PATCHv2 0/2] DT support for isp1704-charger Anton Vorontsov
2013-11-14 18:05 ` [PATCH 1/2] isp1704_charger: Add DT support Pali Rohár
2013-11-14 22:34 ` Sebastian Reichel
2013-11-15 6:45 ` Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385859611-26532-2-git-send-email-sre@debian.org \
--to=sre@debian.org \
--cc=anton@enomsg.org \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pali.rohar@gmail.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).