[PATCHv13] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.

[PATCHv13] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.

[Denis Carikli]

The following devices/functionalities were added:
 * Main and secondary UARTs.
 * i2c and the pcf8563 device.
 * Ethernet.
 * NAND.
 * The BP1 button.
 * The LED.
 * Watchdog
 * SD.

Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
ChangeLog v10->v13:
- The display part was splitted out because it depends on other
  patches that are not applied yet, the commit message was updated accordingly.
- The new GPIO and input defines are now used in the dts(i).

ChangeLog v9->v10:
- Adapted to the new pingrp patches.

ChangeLog v8->v9:
- Licenses were shortened.
---
 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi       |   60 ++++++++++
 .../boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts  |  119 ++++++++++++++++++++
 2 files changed, 179 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
 create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts

diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
new file mode 100644
index 0000000..8abd45a
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX25";
+	compatible = "eukrea,cpuimx25", "fsl,imx25";
+
+	memory {
+		reg = <0x80000000 0x4000000>; /* 64M */
+	};
+};
+
+&fec {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-cpuimx25 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <MX25_FEC_PINGRP1>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <MX25_I2C1_PINGRP1>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
new file mode 100644
index 0000000..3570f88
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx25-eukrea-cpuimx25.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD25";
+	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		bp1 {
+			label = "BP1";
+			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 20>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <MX25_AUDMUX_PINGRP1>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <MX25_ESDHC1_PINGRP1>;
+		};
+
+		pinctrl_gpiokeys: gpiokeysgrp {
+			fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
+		};
+
+		pinctrl_gpioled: gpioledgrp {
+			fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
+		};
+
+		pinctrl_lcdc: lcdcgrp {
+			fsl,pins = <MX25_LCDC_PINGRP1>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <MX25_UART1_PINGRP1>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <MX25_UART2_PINGRP1>;
+		};
+	};
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv13] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.

[Shawn Guo]

On Thu, Dec 05, 2013 at 03:56:56PM +0100, Denis Carikli wrote:
> The following devices/functionalities were added:
>  * Main and secondary UARTs.
>  * i2c and the pcf8563 device.
>  * Ethernet.
>  * NAND.
>  * The BP1 button.
>  * The LED.
>  * Watchdog
>  * SD.
> 
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: devicetree@vger.kernel.org
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Eric Bénard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> ---
> ChangeLog v10->v13:
> - The display part was splitted out because it depends on other
>   patches that are not applied yet, the commit message was updated accordingly.
> - The new GPIO and input defines are now used in the dts(i).
> 
> ChangeLog v9->v10:
> - Adapted to the new pingrp patches.
> 
> ChangeLog v8->v9:
> - Licenses were shortened.
> ---
>  arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi       |   60 ++++++++++
>  .../boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts  |  119 ++++++++++++++++++++
>  2 files changed, 179 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
>  create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts

Added the dtb target into arch/arm/boot/dts/Makefile, and applied the
patch.

Shawn