[PATCH v2 4/4] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY

[Andrew Lunn <andrew@lunn.ch>]

Add nodes for the two SATA PHYs on kirkewood.
Add node for the one SATA PHY on Dove.
Add pHandles to the PHYs in the sata nodes.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
v1->v2:
sata_phy@... ->sata-phy@
value after '@' matching the first address in the reg.
---
 arch/arm/boot/dts/dove.dtsi          | 11 +++++++++++
 arch/arm/boot/dts/kirkwood-6281.dtsi |  2 ++
 arch/arm/boot/dts/kirkwood-6282.dtsi |  2 ++
 arch/arm/boot/dts/kirkwood.dtsi      | 18 ++++++++++++++++++
 4 files changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 113a8bc7bee7..0d786f868760 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -490,10 +490,21 @@
 				reg = <0xa0000 0x2400>;
 				interrupts = <62>;
 				clocks = <&gate_clk 3>;
+				phys = <&sata_phy0>;
+				phy-names = "0";
 				nr-ports = <1>;
 				status = "disabled";
 			};
 
+			sata_phy0: sata-phy@a2000 {
+				compatible = "marvell,mvebu-sata-phy";
+				reg = <0xa2000 0x0334>;
+				clocks = <&gate_clk 3>;
+				clock-names = "sata";
+				#phy-cells = <0>;
+				status = "ok";
+			};
+
 			rtc: real-time-clock@d8500 {
 				compatible = "marvell,orion-rtc";
 				reg = <0xd8500 0x20>;
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 650ef30e1856..92a1c747456a 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -89,6 +89,8 @@
 			interrupts = <21>;
 			clocks = <&gate_clk 14>, <&gate_clk 15>;
 			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "0", "1";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 3933a331ddc2..dfa6b073cf00 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -117,6 +117,8 @@
 			interrupts = <21>;
 			clocks = <&gate_clk 14>, <&gate_clk 15>;
 			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "0", "1";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 8b73c80f1dad..ee06951721c4 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -282,5 +282,23 @@
 				/* set phy-handle property in board file */
 			};
 		};
+
+		sata_phy0: sata-phy@82000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x82000 0x0334>;
+			clocks = <&gate_clk 14>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+			status = "ok";
+		};
+
+		sata_phy1: sata-phy@84000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x84000 0x0334>;
+			clocks = <&gate_clk 15>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+			status = "ok";
+		};
 	};
 };
-- 
1.8.5