* [PATCH] ARM: dts: Leave sdio1 as disabled on bcm28155-ap
@ 2013-12-05 22:42 Tim Kryger
0 siblings, 0 replies; only message in thread
From: Tim Kryger @ 2013-12-05 22:42 UTC (permalink / raw)
To: Christian Daudt, Rob Herring, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell
Cc: Tim Kryger, Broadcom Kernel Feedback List, Device Tree List,
ARM Linux List, Linux Kernel Mailing List, Linaro Patches List
The sdio1 interface pins are routed to an unpopulated daughter card
connector on the bcm28155-ap board. Thus there is no need to mark
this interface as enabled.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
---
arch/arm/boot/dts/bcm28155-ap.dts | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 08e47c2..d2e7769 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -27,11 +27,6 @@
status = "okay";
};
- sdio1: sdio@3f180000 {
- max-frequency = <48000000>;
- status = "okay";
- };
-
sdio2: sdio@3f190000 {
non-removable;
max-frequency = <48000000>;
--
1.8.0.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2013-12-05 22:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-05 22:42 [PATCH] ARM: dts: Leave sdio1 as disabled on bcm28155-ap Tim Kryger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).