* [PATCH RESEND v5 1/4] mfd: add LP3943 MFD driver
2013-12-06 2:18 [PATCH RESEND v5 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator Milo Kim
@ 2013-12-06 2:18 ` Milo Kim
2013-12-06 2:18 ` [PATCH RESEND v5 2/4] gpio: add LP3943 I2C GPIO expander driver Milo Kim
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Milo Kim @ 2013-12-06 2:18 UTC (permalink / raw)
To: Lee Jones, Samuel Ortiz, Thierry Reding
Cc: linux-kernel, devicetree, linux-pwm, Linus Walleij, Milo Kim
LP3943 has 16 output pins which can be used as GPIO expander and PWM generator.
* Regmap I2C interface for R/W LP3943 registers
* Atomic operations for output pin assignment
The driver should check whether requested pin is available or not.
If the pin is already used, pin request returns as a failure.
A driver data, 'pin_used' is checked when gpio_request() and
pwm_request() are called. If the pin is available, then pin_used is set.
And it is cleared when gpio_free() and pwm_free().
* Device tree support
Compatible strings for GPIO and PWM driver.
LP3943 platform data is PWM related, so parsing the device tree is
implemented in the PWM driver.
Signed-off-by: Milo Kim <milo.kim@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
* Patch v5
Same as v4
* Patch v4
Driver description was moved from the documentation in patch v3.
* Patch v3
Now, output pin number is exactly matched with enum value of '
lp3943_pwm_output'.
Use dev_get_platdata() helper function in probe().
Use module_i2c_driver() for initcall.
* Patch v2
Handle atomic operations for output pin assignment.
drivers/mfd/Kconfig | 11 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/lp3943.c | 167 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/lp3943.h | 114 ++++++++++++++++++++++++++++++
4 files changed, 293 insertions(+)
create mode 100644 drivers/mfd/lp3943.c
create mode 100644 include/linux/mfd/lp3943.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b7c74a7..eb16bd8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -725,6 +725,17 @@ config MFD_DM355EVM_MSP
boards. MSP430 firmware manages resets and power sequencing,
inputs from buttons and the IR remote, LEDs, an RTC, and more.
+config MFD_LP3943
+ tristate "TI/National Semiconductor LP3943 MFD Driver"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Support for the TI/National Semiconductor LP3943.
+ This driver consists of GPIO and PWM drivers.
+ With these functionalities, it can be used for LED string control or
+ general usage such like a GPIO controller and a PWM controller.
+
config MFD_LP8788
bool "TI LP8788 Power Management Unit Driver"
depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8a28dc9..58554f1 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -102,6 +102,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
+obj-$(CONFIG_MFD_LP3943) += lp3943.o
obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
da9055-objs := da9055-core.o da9055-i2c.o
diff --git a/drivers/mfd/lp3943.c b/drivers/mfd/lp3943.c
new file mode 100644
index 0000000..e322268
--- /dev/null
+++ b/drivers/mfd/lp3943.c
@@ -0,0 +1,167 @@
+/*
+ * TI/National Semiconductor LP3943 MFD Core Driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver structure:
+ * LP3943 is an integrated device capable of driving 16 output channels.
+ * It can be used for a GPIO expander and PWM generators.
+ *
+ * LED control General usage for a device
+ * ___________ ____________________________
+ *
+ * LP3943 MFD ---- GPIO expander leds-gpio eg) HW enable pin
+ * |
+ * --- PWM generator leds-pwm eg) PWM input
+ *
+ * Internal two PWM channels are used for LED dimming effect.
+ * And each output pin can be used as a GPIO as well.
+ * The LED functionality can work with GPIOs or PWMs.
+ * LEDs can be controlled with legacy leds-gpio(static brightness) or
+ * leds-pwm drivers(dynamic brightness control).
+ * Alternatively, it can be used for generic GPIO and PWM controller.
+ * For example, a GPIO is HW enable pin of a device.
+ * A PWM is input pin of a backlight device.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/lp3943.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#define LP3943_MAX_REGISTERS 0x09
+
+/* Register configuration for pin MUX */
+static const struct lp3943_reg_cfg lp3943_mux_cfg[] = {
+ /* address, mask, shift */
+ { LP3943_REG_MUX0, 0x03, 0 },
+ { LP3943_REG_MUX0, 0x0C, 2 },
+ { LP3943_REG_MUX0, 0x30, 4 },
+ { LP3943_REG_MUX0, 0xC0, 6 },
+ { LP3943_REG_MUX1, 0x03, 0 },
+ { LP3943_REG_MUX1, 0x0C, 2 },
+ { LP3943_REG_MUX1, 0x30, 4 },
+ { LP3943_REG_MUX1, 0xC0, 6 },
+ { LP3943_REG_MUX2, 0x03, 0 },
+ { LP3943_REG_MUX2, 0x0C, 2 },
+ { LP3943_REG_MUX2, 0x30, 4 },
+ { LP3943_REG_MUX2, 0xC0, 6 },
+ { LP3943_REG_MUX3, 0x03, 0 },
+ { LP3943_REG_MUX3, 0x0C, 2 },
+ { LP3943_REG_MUX3, 0x30, 4 },
+ { LP3943_REG_MUX3, 0xC0, 6 },
+};
+
+static struct mfd_cell lp3943_devs[] = {
+ {
+ .name = "lp3943-pwm",
+ .of_compatible = "ti,lp3943-pwm",
+ },
+ {
+ .name = "lp3943-gpio",
+ .of_compatible = "ti,lp3943-gpio",
+ },
+};
+
+int lp3943_read_byte(struct lp3943 *lp3943, u8 reg, u8 *read)
+{
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(lp3943->regmap, reg, &val);
+ if (ret < 0)
+ return ret;
+
+ *read = (u8)val;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(lp3943_read_byte);
+
+int lp3943_write_byte(struct lp3943 *lp3943, u8 reg, u8 data)
+{
+ return regmap_write(lp3943->regmap, reg, data);
+}
+EXPORT_SYMBOL_GPL(lp3943_write_byte);
+
+int lp3943_update_bits(struct lp3943 *lp3943, u8 reg, u8 mask, u8 data)
+{
+ return regmap_update_bits(lp3943->regmap, reg, mask, data);
+}
+EXPORT_SYMBOL_GPL(lp3943_update_bits);
+
+static const struct regmap_config lp3943_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = LP3943_MAX_REGISTERS,
+};
+
+static int lp3943_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+ struct lp3943 *lp3943;
+ struct device *dev = &cl->dev;
+
+ lp3943 = devm_kzalloc(dev, sizeof(*lp3943), GFP_KERNEL);
+ if (!lp3943)
+ return -ENOMEM;
+
+ lp3943->regmap = devm_regmap_init_i2c(cl, &lp3943_regmap_config);
+ if (IS_ERR(lp3943->regmap))
+ return PTR_ERR(lp3943->regmap);
+
+ lp3943->pdata = dev_get_platdata(dev);
+ lp3943->dev = dev;
+ lp3943->mux_cfg = lp3943_mux_cfg;
+ i2c_set_clientdata(cl, lp3943);
+
+ return mfd_add_devices(dev, -1, lp3943_devs, ARRAY_SIZE(lp3943_devs),
+ NULL, 0, NULL);
+}
+
+static int lp3943_remove(struct i2c_client *cl)
+{
+ struct lp3943 *lp3943 = i2c_get_clientdata(cl);
+
+ mfd_remove_devices(lp3943->dev);
+ return 0;
+}
+
+static const struct i2c_device_id lp3943_ids[] = {
+ { "lp3943", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp3943_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id lp3943_of_match[] = {
+ { .compatible = "ti,lp3943", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lp3943_of_match);
+#endif
+
+static struct i2c_driver lp3943_driver = {
+ .probe = lp3943_probe,
+ .remove = lp3943_remove,
+ .driver = {
+ .name = "lp3943",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(lp3943_of_match),
+ },
+ .id_table = lp3943_ids,
+};
+
+module_i2c_driver(lp3943_driver);
+
+MODULE_DESCRIPTION("LP3943 MFD Core Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/lp3943.h b/include/linux/mfd/lp3943.h
new file mode 100644
index 0000000..3490db7
--- /dev/null
+++ b/include/linux/mfd/lp3943.h
@@ -0,0 +1,114 @@
+/*
+ * TI/National Semiconductor LP3943 Device
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __MFD_LP3943_H__
+#define __MFD_LP3943_H__
+
+#include <linux/gpio.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+/* Registers */
+#define LP3943_REG_GPIO_A 0x00
+#define LP3943_REG_GPIO_B 0x01
+#define LP3943_REG_PRESCALE0 0x02
+#define LP3943_REG_PWM0 0x03
+#define LP3943_REG_PRESCALE1 0x04
+#define LP3943_REG_PWM1 0x05
+#define LP3943_REG_MUX0 0x06
+#define LP3943_REG_MUX1 0x07
+#define LP3943_REG_MUX2 0x08
+#define LP3943_REG_MUX3 0x09
+
+/* Bit description for LP3943_REG_MUX0 ~ 3 */
+#define LP3943_GPIO_IN 0x00
+#define LP3943_GPIO_OUT_HIGH 0x00
+#define LP3943_GPIO_OUT_LOW 0x01
+#define LP3943_DIM_PWM0 0x02
+#define LP3943_DIM_PWM1 0x03
+
+#define LP3943_NUM_PWMS 2
+
+enum lp3943_pwm_output {
+ LP3943_PWM_OUT0,
+ LP3943_PWM_OUT1,
+ LP3943_PWM_OUT2,
+ LP3943_PWM_OUT3,
+ LP3943_PWM_OUT4,
+ LP3943_PWM_OUT5,
+ LP3943_PWM_OUT6,
+ LP3943_PWM_OUT7,
+ LP3943_PWM_OUT8,
+ LP3943_PWM_OUT9,
+ LP3943_PWM_OUT10,
+ LP3943_PWM_OUT11,
+ LP3943_PWM_OUT12,
+ LP3943_PWM_OUT13,
+ LP3943_PWM_OUT14,
+ LP3943_PWM_OUT15,
+};
+
+/*
+ * struct lp3943_pwm_map
+ * @output: Output pins which are mapped to each PWM channel
+ * @num_outputs: Number of outputs
+ */
+struct lp3943_pwm_map {
+ enum lp3943_pwm_output *output;
+ int num_outputs;
+};
+
+/*
+ * struct lp3943_platform_data
+ * @pwms: Output channel definitions for PWM channel 0 and 1
+ */
+struct lp3943_platform_data {
+ struct lp3943_pwm_map *pwms[LP3943_NUM_PWMS];
+};
+
+/*
+ * struct lp3943_reg_cfg
+ * @reg: Register address
+ * @mask: Register bit mask to be updated
+ * @shift: Register bit shift
+ */
+struct lp3943_reg_cfg {
+ u8 reg;
+ u8 mask;
+ u8 shift;
+};
+
+/*
+ * struct lp3943
+ * @dev: Parent device pointer
+ * @regmap: Used for I2C communication on accessing registers
+ * @pdata: LP3943 platform specific data
+ * @mux_cfg: Register configuration for pin MUX
+ * @pin_used: Bit mask for output pin used.
+ * This bitmask is used for pin assignment management.
+ * 1 = pin used, 0 = available.
+ * Only LSB 16 bits are used, but it is unsigned long type
+ * for atomic bitwise operations.
+ */
+struct lp3943 {
+ struct device *dev;
+ struct regmap *regmap;
+ struct lp3943_platform_data *pdata;
+ const struct lp3943_reg_cfg *mux_cfg;
+ unsigned long pin_used;
+};
+
+int lp3943_read_byte(struct lp3943 *lp3943, u8 reg, u8 *read);
+int lp3943_write_byte(struct lp3943 *lp3943, u8 reg, u8 data);
+int lp3943_update_bits(struct lp3943 *lp3943, u8 reg, u8 mask, u8 data);
+#endif
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH RESEND v5 2/4] gpio: add LP3943 I2C GPIO expander driver
2013-12-06 2:18 [PATCH RESEND v5 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator Milo Kim
2013-12-06 2:18 ` [PATCH RESEND v5 1/4] mfd: add LP3943 MFD driver Milo Kim
@ 2013-12-06 2:18 ` Milo Kim
2013-12-06 2:18 ` [PATCH RESEND v5 3/4] pwm: add LP3943 PWM driver Milo Kim
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Milo Kim @ 2013-12-06 2:18 UTC (permalink / raw)
To: Lee Jones, Samuel Ortiz, Thierry Reding
Cc: linux-kernel, devicetree, linux-pwm, Linus Walleij, Milo Kim
This is one of LP3943 MFD driver.
LP3943 is configurable as a GPIO expander, up to 16 GPIOs.
* Application note: how to configure LP3943 as a GPIO expander
http://www.ti.com/lit/an/snva287a/snva287a.pdf
* Supported GPIO controller operations
request, free, direction_input, direction_output, get and set
* GPIO direction register not supported
LP3943 doesn't have the GPIO direction register. It only provides input and
output status registers.
So, private data for the direction should be handled manually.
This variable is updated whenever the direction is changed and
used in 'get' operation.
* Pin assignment
A driver data, 'pin_used' is checked when a GPIO is requested.
If the GPIO is already assigned, then returns as failure.
If the GPIO is available, 'pin_used' is set.
When the GPIO is not used anymore, then it is cleared.
It is defined as unsigned long type for atomic bit operation APIs,
but only LSB 16bits are used because LP3943 has 16 outputs.
Signed-off-by: Milo Kim <milo.kim@ti.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
* Patch v5 and v4
No update, same as v3
* Patch v3
Use inline function instead of macro(), to_lp3943_gpio().
Add 'lp3943_gpio_set_mode()' and use it in lp3943_gpio_direction_input() and
lp3943_gpio_set().
Few code cosmetic applied - indentations.
* Patch v2
Use bitops macros for bit manipulations.
Support device tree structure for the GPIO controller.
Add request() and free() for the pin assignment.
drivers/gpio/Kconfig | 8 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-lp3943.c | 242 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 251 insertions(+)
create mode 100644 drivers/gpio/gpio-lp3943.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b6ed304..e8ee076 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -368,6 +368,14 @@ config GPIO_ARIZONA
help
Support for GPIOs on Wolfson Arizona class devices.
+config GPIO_LP3943
+ tristate "TI/National Semiconductor LP3943 GPIO expander"
+ depends on MFD_LP3943
+ help
+ GPIO driver for LP3943 MFD.
+ LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
+ Open drain outputs are required for this usage.
+
config GPIO_MAX7300
tristate "Maxim MAX7300 GPIO expander"
depends on I2C
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 98e23eb..e246962 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
+obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
diff --git a/drivers/gpio/gpio-lp3943.c b/drivers/gpio/gpio-lp3943.c
new file mode 100644
index 0000000..7b8db88
--- /dev/null
+++ b/drivers/gpio/gpio-lp3943.c
@@ -0,0 +1,242 @@
+/*
+ * TI/National Semiconductor LP3943 GPIO driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/mfd/lp3943.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+enum lp3943_gpios {
+ LP3943_GPIO1,
+ LP3943_GPIO2,
+ LP3943_GPIO3,
+ LP3943_GPIO4,
+ LP3943_GPIO5,
+ LP3943_GPIO6,
+ LP3943_GPIO7,
+ LP3943_GPIO8,
+ LP3943_GPIO9,
+ LP3943_GPIO10,
+ LP3943_GPIO11,
+ LP3943_GPIO12,
+ LP3943_GPIO13,
+ LP3943_GPIO14,
+ LP3943_GPIO15,
+ LP3943_GPIO16,
+ LP3943_MAX_GPIO,
+};
+
+struct lp3943_gpio {
+ struct gpio_chip chip;
+ struct lp3943 *lp3943;
+ u16 input_mask; /* 1 = GPIO is input direction, 0 = output */
+};
+
+static inline struct lp3943_gpio *to_lp3943_gpio(struct gpio_chip *_chip)
+{
+ return container_of(_chip, struct lp3943_gpio, chip);
+}
+
+static int lp3943_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+ struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+
+ /* Return an error if the pin is already assigned */
+ if (test_and_set_bit(offset, &lp3943->pin_used))
+ return -EBUSY;
+
+ return 0;
+}
+
+static void lp3943_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+ struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+
+ clear_bit(offset, &lp3943->pin_used);
+}
+
+static int lp3943_gpio_set_mode(struct lp3943_gpio *lp3943_gpio, u8 offset,
+ u8 val)
+{
+ struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+ const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+
+ return lp3943_update_bits(lp3943, mux[offset].reg, mux[offset].mask,
+ val << mux[offset].shift);
+}
+
+static int lp3943_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+
+ lp3943_gpio->input_mask |= BIT(offset);
+
+ return lp3943_gpio_set_mode(lp3943_gpio, offset, LP3943_GPIO_IN);
+}
+
+static int lp3943_get_gpio_in_status(struct lp3943_gpio *lp3943_gpio,
+ struct gpio_chip *chip, unsigned offset)
+{
+ u8 addr, read;
+ int err;
+
+ switch (offset) {
+ case LP3943_GPIO1 ... LP3943_GPIO8:
+ addr = LP3943_REG_GPIO_A;
+ break;
+ case LP3943_GPIO9 ... LP3943_GPIO16:
+ addr = LP3943_REG_GPIO_B;
+ offset = offset - 8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ err = lp3943_read_byte(lp3943_gpio->lp3943, addr, &read);
+ if (err)
+ return err;
+
+ return !!(read & BIT(offset));
+}
+
+static int lp3943_get_gpio_out_status(struct lp3943_gpio *lp3943_gpio,
+ struct gpio_chip *chip, unsigned offset)
+{
+ struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+ const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+ u8 read;
+ int err;
+
+ err = lp3943_read_byte(lp3943, mux[offset].reg, &read);
+ if (err)
+ return err;
+
+ read = (read & mux[offset].mask) >> mux[offset].shift;
+
+ if (read == LP3943_GPIO_OUT_HIGH)
+ return 1;
+ else if (read == LP3943_GPIO_OUT_LOW)
+ return 0;
+ else
+ return -EINVAL;
+}
+
+static int lp3943_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+
+ /*
+ * Limitation:
+ * LP3943 doesn't have the GPIO direction register. It provides
+ * only input and output status registers.
+ * So, direction info is required to handle the 'get' operation.
+ * This variable is updated whenever the direction is changed and
+ * it is used here.
+ */
+
+ if (lp3943_gpio->input_mask & BIT(offset))
+ return lp3943_get_gpio_in_status(lp3943_gpio, chip, offset);
+ else
+ return lp3943_get_gpio_out_status(lp3943_gpio, chip, offset);
+}
+
+static void lp3943_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+ u8 data;
+
+ if (value)
+ data = LP3943_GPIO_OUT_HIGH;
+ else
+ data = LP3943_GPIO_OUT_LOW;
+
+ lp3943_gpio_set_mode(lp3943_gpio, offset, data);
+}
+
+static int lp3943_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+
+ lp3943_gpio_set(chip, offset, value);
+ lp3943_gpio->input_mask &= ~BIT(offset);
+
+ return 0;
+}
+
+static const struct gpio_chip lp3943_gpio_chip = {
+ .label = "lp3943",
+ .owner = THIS_MODULE,
+ .request = lp3943_gpio_request,
+ .free = lp3943_gpio_free,
+ .direction_input = lp3943_gpio_direction_input,
+ .get = lp3943_gpio_get,
+ .direction_output = lp3943_gpio_direction_output,
+ .set = lp3943_gpio_set,
+ .base = -1,
+ .ngpio = LP3943_MAX_GPIO,
+ .can_sleep = 1,
+};
+
+static int lp3943_gpio_probe(struct platform_device *pdev)
+{
+ struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent);
+ struct lp3943_gpio *lp3943_gpio;
+
+ lp3943_gpio = devm_kzalloc(&pdev->dev, sizeof(*lp3943_gpio),
+ GFP_KERNEL);
+ if (!lp3943_gpio)
+ return -ENOMEM;
+
+ lp3943_gpio->lp3943 = lp3943;
+ lp3943_gpio->chip = lp3943_gpio_chip;
+ lp3943_gpio->chip.dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, lp3943_gpio);
+
+ return gpiochip_add(&lp3943_gpio->chip);
+}
+
+static int lp3943_gpio_remove(struct platform_device *pdev)
+{
+ struct lp3943_gpio *lp3943_gpio = platform_get_drvdata(pdev);
+
+ return gpiochip_remove(&lp3943_gpio->chip);
+}
+
+static const struct of_device_id lp3943_gpio_of_match[] = {
+ { .compatible = "ti,lp3943-gpio", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lp3943_gpio_of_match);
+
+static struct platform_driver lp3943_gpio_driver = {
+ .probe = lp3943_gpio_probe,
+ .remove = lp3943_gpio_remove,
+ .driver = {
+ .name = "lp3943-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(lp3943_gpio_of_match),
+ },
+};
+module_platform_driver(lp3943_gpio_driver);
+
+MODULE_DESCRIPTION("LP3943 GPIO driver");
+MODULE_ALIAS("platform:lp3943-gpio");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH RESEND v5 3/4] pwm: add LP3943 PWM driver
2013-12-06 2:18 [PATCH RESEND v5 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator Milo Kim
2013-12-06 2:18 ` [PATCH RESEND v5 1/4] mfd: add LP3943 MFD driver Milo Kim
2013-12-06 2:18 ` [PATCH RESEND v5 2/4] gpio: add LP3943 I2C GPIO expander driver Milo Kim
@ 2013-12-06 2:18 ` Milo Kim
2013-12-06 2:18 ` [PATCH RESEND v5 4/4] Documentation: add LP3943 DT bindings and document Milo Kim
[not found] ` <1386296324-23039-1-git-send-email-milo.kim-l0cyMroinI0@public.gmane.org>
4 siblings, 0 replies; 6+ messages in thread
From: Milo Kim @ 2013-12-06 2:18 UTC (permalink / raw)
To: Lee Jones, Samuel Ortiz, Thierry Reding
Cc: linux-kernel, devicetree, linux-pwm, Linus Walleij, Milo Kim
This is the other of the LP3943 MFD driver.
LP3943 can be used as a PWM generator, up to 2 channels.
* Two PWM generators supported
* Supported PWM operations
request, free, config, enable and disable
* Pin assignment
A driver data, 'pin_used' is checked when a PWM is requested.
If the output pin is already assigned, then returns as failure.
If the pin is available, 'pin_used' is set.
When the PWM is not used anymore, then it is cleared.
It is defined as unsigned long type for atomic bit operation APIs,
but only LSB 16bits are used because LP3943 has 16 outputs.
Signed-off-by: Milo Kim <milo.kim@ti.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
---
* Patch v5
Add Thierry's acknowledgement.
* Patch v4
No update, same as v3.
* Patch v3
Manual polarity not supported any more.
Add encapsulation functions for accessing internal data structure.
Use pwm_set_chip_data() and pwm_get_chip_data().
And other code fixes based on Thierry's feedback.
drivers/pwm/Kconfig | 10 ++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-lp3943.c | 314 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 325 insertions(+)
create mode 100644 drivers/pwm/pwm-lp3943.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 75840b5..9cf38bc 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -81,6 +81,16 @@ config PWM_JZ4740
To compile this driver as a module, choose M here: the module
will be called pwm-jz4740.
+config PWM_LP3943
+ tristate "TI/National Semiconductor LP3943 PWM support"
+ depends on MFD_LP3943
+ help
+ Generic PWM framework driver for LP3943 which supports two PWM
+ channels.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-lp3943.
+
config PWM_LPC32XX
tristate "LPC32XX PWM support"
depends on ARCH_LPC32XX
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 77a8c18..db8e349 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
obj-$(CONFIG_PWM_IMX) += pwm-imx.o
obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o
+obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o
obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c
new file mode 100644
index 0000000..8a843a0
--- /dev/null
+++ b/drivers/pwm/pwm-lp3943.c
@@ -0,0 +1,314 @@
+/*
+ * TI/National Semiconductor LP3943 PWM driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mfd/lp3943.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define LP3943_MAX_DUTY 255
+#define LP3943_MIN_PERIOD 6250
+#define LP3943_MAX_PERIOD 1600000
+
+struct lp3943_pwm {
+ struct pwm_chip chip;
+ struct lp3943 *lp3943;
+ struct lp3943_platform_data *pdata;
+};
+
+static inline struct lp3943_pwm *to_lp3943_pwm(struct pwm_chip *_chip)
+{
+ return container_of(_chip, struct lp3943_pwm, chip);
+}
+
+static struct lp3943_pwm_map *
+lp3943_pwm_request_map(struct lp3943_pwm *lp3943_pwm, int hwpwm)
+{
+ struct lp3943_platform_data *pdata = lp3943_pwm->pdata;
+ struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+ struct lp3943_pwm_map *pwm_map;
+ int i, offset;
+
+ pwm_map = kzalloc(sizeof(*pwm_map), GFP_KERNEL);
+ if (!pwm_map)
+ return ERR_PTR(-ENOMEM);
+
+ pwm_map->output = pdata->pwms[hwpwm]->output;
+ pwm_map->num_outputs = pdata->pwms[hwpwm]->num_outputs;
+
+ for (i = 0; i < pwm_map->num_outputs; i++) {
+ offset = pwm_map->output[i];
+
+ /* Return an error if the pin is already assigned */
+ if (test_and_set_bit(offset, &lp3943->pin_used))
+ return ERR_PTR(-EBUSY);
+ }
+
+ return pwm_map;
+}
+
+static int lp3943_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+ struct lp3943_pwm_map *pwm_map;
+
+ pwm_map = lp3943_pwm_request_map(lp3943_pwm, pwm->hwpwm);
+ if (IS_ERR(pwm_map))
+ return PTR_ERR(pwm_map);
+
+ return pwm_set_chip_data(pwm, pwm_map);
+}
+
+static void lp3943_pwm_free_map(struct lp3943_pwm *lp3943_pwm,
+ struct lp3943_pwm_map *pwm_map)
+{
+ struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+ int i, offset;
+
+ for (i = 0; i < pwm_map->num_outputs; i++) {
+ offset = pwm_map->output[i];
+ clear_bit(offset, &lp3943->pin_used);
+ }
+
+ kfree(pwm_map);
+}
+
+static void lp3943_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+ struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+
+ lp3943_pwm_free_map(lp3943_pwm, pwm_map);
+}
+
+static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+ struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+ u8 val, reg_duty, reg_prescale;
+ int err;
+
+ /*
+ * How to configure the LP3943 PWMs
+ *
+ * 1) Period = 6250 ~ 1600000
+ * 2) Prescale = period / 6250 -1
+ * 3) Duty = input duty
+ *
+ * Prescale and duty are register values
+ */
+
+ if (pwm->hwpwm == 0) {
+ reg_prescale = LP3943_REG_PRESCALE0;
+ reg_duty = LP3943_REG_PWM0;
+ } else {
+ reg_prescale = LP3943_REG_PRESCALE1;
+ reg_duty = LP3943_REG_PWM1;
+ }
+
+ period_ns = clamp(period_ns, LP3943_MIN_PERIOD, LP3943_MAX_PERIOD);
+ val = (u8)(period_ns / LP3943_MIN_PERIOD - 1);
+
+ err = lp3943_write_byte(lp3943, reg_prescale, val);
+ if (err)
+ return err;
+
+ val = (u8)(duty_ns * LP3943_MAX_DUTY / period_ns);
+
+ return lp3943_write_byte(lp3943, reg_duty, val);
+}
+
+static int lp3943_pwm_set_mode(struct lp3943_pwm *lp3943_pwm,
+ struct lp3943_pwm_map *pwm_map,
+ u8 val)
+{
+ struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+ const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+ int i, index, err;
+
+ for (i = 0; i < pwm_map->num_outputs; i++) {
+ index = pwm_map->output[i];
+ err = lp3943_update_bits(lp3943, mux[index].reg,
+ mux[index].mask,
+ val << mux[index].shift);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int lp3943_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+ struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+ u8 val;
+
+ if (pwm->hwpwm == 0)
+ val = LP3943_DIM_PWM0;
+ else
+ val = LP3943_DIM_PWM1;
+
+ /*
+ * Each PWM generator is set to control any of outputs of LP3943.
+ * To enable/disable the PWM, these output pins should be configured.
+ */
+
+ return lp3943_pwm_set_mode(lp3943_pwm, pwm_map, val);
+}
+
+static void lp3943_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+ struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+
+ /*
+ * LP3943 outputs are open-drain, so the pin should be configured
+ * when the PWM is disabled.
+ */
+
+ lp3943_pwm_set_mode(lp3943_pwm, pwm_map, LP3943_GPIO_OUT_HIGH);
+}
+
+static const struct pwm_ops lp3943_pwm_ops = {
+ .request = lp3943_pwm_request,
+ .free = lp3943_pwm_free,
+ .config = lp3943_pwm_config,
+ .enable = lp3943_pwm_enable,
+ .disable = lp3943_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int lp3943_pwm_parse_dt(struct device *dev,
+ struct lp3943_pwm *lp3943_pwm)
+{
+ static const char * const name[] = { "ti,pwm0", "ti,pwm1", };
+ struct device_node *node = dev->of_node;
+ struct lp3943_platform_data *pdata;
+ struct lp3943_pwm_map *pwm_map;
+ enum lp3943_pwm_output *output;
+ int i, err, proplen, count = 0;
+ u32 num_outputs;
+
+ if (!node)
+ return -EINVAL;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ /*
+ * Read the output map configuration from the device tree.
+ * Each of the two PWM generators can drive zero or more outputs.
+ */
+
+ for (i = 0; i < LP3943_NUM_PWMS; i++) {
+ if (!of_get_property(node, name[i], &proplen))
+ continue;
+
+ num_outputs = proplen / sizeof(u32);
+ if (num_outputs == 0)
+ continue;
+
+ output = devm_kzalloc(dev, sizeof(*output) * num_outputs,
+ GFP_KERNEL);
+ if (!output)
+ return -ENOMEM;
+
+ err = of_property_read_u32_array(node, name[i], output,
+ num_outputs);
+ if (err)
+ return err;
+
+ pwm_map = devm_kzalloc(dev, sizeof(*pwm_map), GFP_KERNEL);
+ if (!pwm_map)
+ return -ENOMEM;
+
+ pwm_map->output = output;
+ pwm_map->num_outputs = num_outputs;
+ pdata->pwms[i] = pwm_map;
+
+ count++;
+ }
+
+ if (count == 0)
+ return -ENODATA;
+
+ lp3943_pwm->pdata = pdata;
+ return 0;
+}
+
+static int lp3943_pwm_probe(struct platform_device *pdev)
+{
+ struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent);
+ struct lp3943_pwm *lp3943_pwm;
+ int ret;
+
+ lp3943_pwm = devm_kzalloc(&pdev->dev, sizeof(*lp3943_pwm), GFP_KERNEL);
+ if (!lp3943_pwm)
+ return -ENOMEM;
+
+ lp3943_pwm->pdata = lp3943->pdata;
+ if (!lp3943_pwm->pdata) {
+ if (IS_ENABLED(CONFIG_OF))
+ ret = lp3943_pwm_parse_dt(&pdev->dev, lp3943_pwm);
+ else
+ ret = -ENODEV;
+
+ if (ret)
+ return ret;
+ }
+
+ lp3943_pwm->lp3943 = lp3943;
+ lp3943_pwm->chip.dev = &pdev->dev;
+ lp3943_pwm->chip.ops = &lp3943_pwm_ops;
+ lp3943_pwm->chip.npwm = LP3943_NUM_PWMS;
+
+ platform_set_drvdata(pdev, lp3943_pwm);
+
+ return pwmchip_add(&lp3943_pwm->chip);
+}
+
+static int lp3943_pwm_remove(struct platform_device *pdev)
+{
+ struct lp3943_pwm *lp3943_pwm = platform_get_drvdata(pdev);
+
+ return pwmchip_remove(&lp3943_pwm->chip);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id lp3943_pwm_of_match[] = {
+ { .compatible = "ti,lp3943-pwm", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lp3943_pwm_of_match);
+#endif
+
+static struct platform_driver lp3943_pwm_driver = {
+ .probe = lp3943_pwm_probe,
+ .remove = lp3943_pwm_remove,
+ .driver = {
+ .name = "lp3943-pwm",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(lp3943_pwm_of_match),
+ },
+};
+module_platform_driver(lp3943_pwm_driver);
+
+MODULE_DESCRIPTION("LP3943 PWM driver");
+MODULE_ALIAS("platform:lp3943-pwm");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH RESEND v5 4/4] Documentation: add LP3943 DT bindings and document
2013-12-06 2:18 [PATCH RESEND v5 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator Milo Kim
` (2 preceding siblings ...)
2013-12-06 2:18 ` [PATCH RESEND v5 3/4] pwm: add LP3943 PWM driver Milo Kim
@ 2013-12-06 2:18 ` Milo Kim
[not found] ` <1386296324-23039-1-git-send-email-milo.kim-l0cyMroinI0@public.gmane.org>
4 siblings, 0 replies; 6+ messages in thread
From: Milo Kim @ 2013-12-06 2:18 UTC (permalink / raw)
To: Lee Jones, Samuel Ortiz, Thierry Reding
Cc: linux-kernel, devicetree, linux-pwm, Linus Walleij, Milo Kim
Bindings for LP3943 MFD, GPIO and PWM controller are added.
Cc: devicetree@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Milo Kim <milo.kim@ti.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
---
.../devicetree/bindings/gpio/gpio-lp3943.txt | 37 +++++++++++++
Documentation/devicetree/bindings/mfd/lp3943.txt | 33 +++++++++++
.../devicetree/bindings/pwm/pwm-lp3943.txt | 58 ++++++++++++++++++++
3 files changed, 128 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
create mode 100644 Documentation/devicetree/bindings/mfd/lp3943.txt
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
new file mode 100644
index 0000000..80fcb7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
@@ -0,0 +1,37 @@
+TI/National Semiconductor LP3943 GPIO controller
+
+Required properties:
+ - compatible: "ti,lp3943-gpio"
+ - gpio-controller: Marks the device node as a GPIO controller.
+ - #gpio-cells: Should be 2. See gpio.txt in this directory for a
+ description of the cells format.
+
+Example:
+Simple LED controls with LP3943 GPIO controller
+
+&i2c4 {
+ lp3943@60 {
+ compatible = "ti,lp3943";
+ reg = <0x60>;
+
+ gpioex: gpio {
+ compatible = "ti,lp3943-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+};
+
+leds {
+ compatible = "gpio-leds";
+ indicator1 {
+ label = "indi1";
+ gpios = <&gpioex 9 GPIO_ACTIVE_LOW>;
+ };
+
+ indicator2 {
+ label = "indi2";
+ gpios = <&gpioex 10 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+};
diff --git a/Documentation/devicetree/bindings/mfd/lp3943.txt b/Documentation/devicetree/bindings/mfd/lp3943.txt
new file mode 100644
index 0000000..e8591d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp3943.txt
@@ -0,0 +1,33 @@
+TI/National Semiconductor LP3943 MFD driver
+
+Required properties:
+ - compatible: "ti,lp3943"
+ - reg: I2C slave address. From 0x60 to 0x67.
+
+LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm.
+
+For the LP3943 GPIO properties please refer to:
+Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
+
+For the LP3943 PWM properties please refer to:
+Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
+
+Example:
+
+lp3943@60 {
+ compatible = "ti,lp3943";
+ reg = <0x60>;
+
+ gpioex: gpio {
+ compatible = "ti,lp3943-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pwm3943: pwm {
+ compatible = "ti,lp3943-pwm";
+ #pwm-cells = <2>;
+ ti,pwm0 = <8 9 10>;
+ ti,pwm1 = <15>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
new file mode 100644
index 0000000..7bd9d3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
@@ -0,0 +1,58 @@
+TI/National Semiconductor LP3943 PWM controller
+
+Required properties:
+ - compatible: "ti,lp3943-pwm"
+ - #pwm-cells: Should be 2. See pwm.txt in this directory for a
+ description of the cells format.
+ Note that this hardware limits the period length to the
+ range 6250~1600000.
+ - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1.
+ 0 = output 0
+ 1 = output 1
+ .
+ .
+ 15 = output 15
+
+Example:
+PWM 0 is for RGB LED brightness control
+PWM 1 is for brightness control of LP8557 backlight device
+
+&i2c3 {
+ lp3943@60 {
+ compatible = "ti,lp3943";
+ reg = <0x60>;
+
+ /*
+ * PWM 0 : output 8, 9 and 10
+ * PWM 1 : output 15
+ */
+ pwm3943: pwm {
+ compatible = "ti,lp3943-pwm";
+ #pwm-cells = <2>;
+ ti,pwm0 = <8 9 10>;
+ ti,pwm1 = <15>;
+ };
+ };
+
+};
+
+/* LEDs control with PWM 0 of LP3943 */
+pwmleds {
+ compatible = "pwm-leds";
+ rgb {
+ label = "indi::rgb";
+ pwms = <&pwm3943 0 10000>;
+ max-brightness = <255>;
+ };
+};
+
+&i2c4 {
+ /* Backlight control with PWM 1 of LP3943 */
+ backlight@2c {
+ compatible = "ti,lp8557";
+ reg = <0x2c>;
+
+ pwms = <&pwm3943 1 10000>;
+ pwm-names = "lp8557";
+ };
+};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread[parent not found: <1386296324-23039-1-git-send-email-milo.kim-l0cyMroinI0@public.gmane.org>]
* Re: [PATCH RESEND v5 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
[not found] ` <1386296324-23039-1-git-send-email-milo.kim-l0cyMroinI0@public.gmane.org>
@ 2013-12-06 9:09 ` Lee Jones
0 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2013-12-06 9:09 UTC (permalink / raw)
To: Milo Kim
Cc: Samuel Ortiz, Thierry Reding, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-pwm-u79uwXL29TY76Z2rM5mHXA, Linus Walleij
On Fri, 06 Dec 2013, Milo Kim wrote:
> LP3943 is an integrated device capable of driving 16 output channels.
> It can be used for GPIO expander and PWM generators.
> LP3493 registers are controlled via the I2C interface.
>
> This patch-set consists of four parts - MFD, GPIO, PWM and documents.
>
> Update from v4 to v5:
> Add Thierry's ACK for the PWM driver and the DT documentation
>
> Milo Kim (4):
> mfd: add LP3943 MFD driver
> gpio: add LP3943 I2C GPIO expander driver
> pwm: add LP3943 PWM driver
> Documentation: add LP3943 DT bindings and document
>
> .../devicetree/bindings/gpio/gpio-lp3943.txt | 37 +++
> Documentation/devicetree/bindings/mfd/lp3943.txt | 33 ++
> .../devicetree/bindings/pwm/pwm-lp3943.txt | 58 ++++
> drivers/gpio/Kconfig | 8 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-lp3943.c | 242 +++++++++++++++
> drivers/mfd/Kconfig | 11 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/lp3943.c | 167 +++++++++++
> drivers/pwm/Kconfig | 10 +
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-lp3943.c | 314 ++++++++++++++++++++
> include/linux/mfd/lp3943.h | 114 +++++++
> 13 files changed, 997 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/lp3943.txt
> create mode 100644 Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
> create mode 100644 drivers/gpio/gpio-lp3943.c
> create mode 100644 drivers/mfd/lp3943.c
> create mode 100644 drivers/pwm/pwm-lp3943.c
> create mode 100644 include/linux/mfd/lp3943.h
Patch-set applied, thanks Milo.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread