From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Russell King <linux@arm.linux.org.uk>,
Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>,
Kevin Hilman <khilman@linaro.org>,
devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 1/9] irqchip: add DesignWare APB ICTL interrupt controller
Date: Sun, 8 Dec 2013 15:13:58 +0100 [thread overview]
Message-ID: <1386512047-874-2-git-send-email-sebastian.hesselbarth@gmail.com> (raw)
In-Reply-To: <1386512047-874-1-git-send-email-sebastian.hesselbarth@gmail.com>
This adds an irqchip driver and corresponding devicetree binding for the
secondary interrupt controllers based on Synopsys DesignWare IP dw_apb_ictl.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Jisheng Zhang <jszhang@marvell.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
Changelog:
v2->v4:
- none
v1->v2:
- reword binding docu for reg property and add FIQ decoding note
(Suggested by Mark Rutland)
- add cleanup on error path (Reported by Jisheng Zhang)
RFCv1->RFCv2:
- added copyright reference
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
.../interrupt-controller/snps,dw-apb-ictl.txt | 32 +++++
drivers/irqchip/Kconfig | 4 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-dw-apb-ictl.c | 150 +++++++++++++++++++++
4 files changed, 187 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
create mode 100644 drivers/irqchip/irq-dw-apb-ictl.c
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
new file mode 100644
index 0000000..4929117
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
@@ -0,0 +1,32 @@
+Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
+
+Synopsys DesignWare provides interrupt controller IP for APB known as
+dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
+APB bus, e.g. Marvell Armada 1500.
+
+Required properties:
+- compatible: shall be "snps,dw-apb-ictl"
+- reg: physical base address of the controller and length of memory mapped
+ region starting with ENABLE_LOW register
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
+- interrupts: interrupt reference to primary interrupt controller
+- interrupt-parent: (optional) reference specific primary interrupt controller
+
+The interrupt sources map to the corresponding bits in the interrupt
+registers, i.e.
+- 0 maps to bit 0 of low interrupts,
+- 1 maps to bit 1 of low interrupts,
+- 32 maps to bit 0 of high interrupts,
+- 33 maps to bit 1 of high interrupts,
+- (optional) fast interrupts start at 64.
+
+Example:
+ aic: interrupt-controller@3000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x3000 0xc00>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3792a1a..940638d 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -30,6 +30,10 @@ config ARM_VIC_NR
The maximum number of VICs available in the system, for
power management.
+config DW_APB_ICTL
+ bool
+ select IRQ_DOMAIN
+
config IMGPDC_IRQ
bool
select GENERIC_IRQ_CHIP
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index c60b901..6427323 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_ARCH_MMP) += irq-mmp.o
obj-$(CONFIG_ARCH_MVEBU) += irq-armada-370-xp.o
obj-$(CONFIG_ARCH_MXS) += irq-mxs.o
obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o
+obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o
obj-$(CONFIG_METAG) += irq-metag-ext.o
obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
obj-$(CONFIG_ARCH_MOXART) += irq-moxart.o
diff --git a/drivers/irqchip/irq-dw-apb-ictl.c b/drivers/irqchip/irq-dw-apb-ictl.c
new file mode 100644
index 0000000..31e231e
--- /dev/null
+++ b/drivers/irqchip/irq-dw-apb-ictl.c
@@ -0,0 +1,150 @@
+/*
+ * Synopsys DW APB ICTL irqchip driver.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * based on GPL'ed 2.6 kernel sources
+ * (c) Marvell International Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include "irqchip.h"
+
+#define APB_INT_ENABLE_L 0x00
+#define APB_INT_ENABLE_H 0x04
+#define APB_INT_MASK_L 0x08
+#define APB_INT_MASK_H 0x0c
+#define APB_INT_FINALSTATUS_L 0x30
+#define APB_INT_FINALSTATUS_H 0x34
+
+static void dw_apb_ictl_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_get_chip(irq);
+ struct irq_chip_generic *gc = irq_get_handler_data(irq);
+ struct irq_domain *d = gc->private;
+ u32 stat;
+ int n;
+
+ chained_irq_enter(chip, desc);
+
+ for (n = 0; n < gc->num_ct; n++) {
+ stat = readl_relaxed(gc->reg_base +
+ APB_INT_FINALSTATUS_L + 4 * n);
+ while (stat) {
+ u32 hwirq = ffs(stat) - 1;
+ generic_handle_irq(irq_find_mapping(d,
+ gc->irq_base + hwirq + 32 * n));
+ stat &= ~(1 << hwirq);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static int __init dw_apb_ictl_init(struct device_node *np,
+ struct device_node *parent)
+{
+ unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+ struct resource r;
+ struct irq_domain *domain;
+ struct irq_chip_generic *gc;
+ void __iomem *iobase;
+ int ret, nrirqs, irq;
+ u32 reg;
+
+ /* Map the parent interrupt for the chained handler */
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0) {
+ pr_err("%s: unable to parse irq\n", np->full_name);
+ return -EINVAL;
+ }
+
+ ret = of_address_to_resource(np, 0, &r);
+ if (ret) {
+ pr_err("%s: unable to get resource\n", np->full_name);
+ return ret;
+ }
+
+ if (!request_mem_region(r.start, resource_size(&r), np->full_name)) {
+ pr_err("%s: unable to request mem region\n", np->full_name);
+ return -ENOMEM;
+ }
+
+ iobase = ioremap(r.start, resource_size(&r));
+ if (!iobase) {
+ pr_err("%s: unable to map resource\n", np->full_name);
+ ret = -ENOMEM;
+ goto err_release;
+ }
+
+ /*
+ * DW IP can be configured to allow 2-64 irqs. We can determine
+ * the number of irqs supported by writing into enable register
+ * and look for bits not set, as corresponding flip-flops will
+ * have been removed by sythesis tool.
+ */
+
+ /* mask and enable all interrupts */
+ writel(~0, iobase + APB_INT_MASK_L);
+ writel(~0, iobase + APB_INT_MASK_H);
+ writel(~0, iobase + APB_INT_ENABLE_L);
+ writel(~0, iobase + APB_INT_ENABLE_H);
+
+ reg = readl(iobase + APB_INT_ENABLE_H);
+ if (reg)
+ nrirqs = 32 + fls(reg);
+ else
+ nrirqs = fls(readl(iobase + APB_INT_ENABLE_L));
+
+ domain = irq_domain_add_linear(np, nrirqs,
+ &irq_generic_chip_ops, NULL);
+ if (!domain) {
+ pr_err("%s: unable to add irq domain\n", np->full_name);
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
+
+ ret = irq_alloc_domain_generic_chips(domain, 32, (nrirqs > 32) ? 2 : 1,
+ np->name, handle_level_irq, clr, 0,
+ IRQ_GC_INIT_MASK_CACHE);
+ if (ret) {
+ pr_err("%s: unable to alloc irq domain gc\n", np->full_name);
+ goto err_unmap;
+ }
+
+ gc = irq_get_domain_generic_chip(domain, 0);
+ gc->private = domain;
+ gc->reg_base = iobase;
+
+ gc->chip_types[0].regs.mask = APB_INT_MASK_L;
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
+ gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit;
+
+ if (nrirqs > 32) {
+ gc->chip_types[1].regs.mask = APB_INT_MASK_H;
+ gc->chip_types[1].chip.irq_mask = irq_gc_mask_set_bit;
+ gc->chip_types[1].chip.irq_unmask = irq_gc_mask_clr_bit;
+ }
+
+ irq_set_handler_data(irq, gc);
+ irq_set_chained_handler(irq, dw_apb_ictl_handler);
+
+ return 0;
+
+err_unmap:
+ iounmap(iobase);
+err_release:
+ release_mem_region(r.start, resource_size(&r));
+ return ret;
+}
+IRQCHIP_DECLARE(dw_apb_ictl,
+ "snps,dw-apb-ictl", dw_apb_ictl_init);
--
1.8.4.rc3
next prev parent reply other threads:[~2013-12-08 14:13 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1381235073-17134-1-git-send-email-sebastian.hesselbarth@gmail.com>
2013-10-08 12:24 ` [PATCH 1/8] irqchip: add DesignWare APB ICTL interrupt controller Sebastian Hesselbarth
2013-10-08 13:24 ` Mark Rutland
2013-10-08 15:51 ` Sebastian Hesselbarth
2013-10-11 9:30 ` Jisheng Zhang
2013-10-17 6:37 ` [PATCH v2 " Sebastian Hesselbarth
2013-10-25 21:30 ` Sebastian Hesselbarth
2013-10-08 12:24 ` [PATCH 3/8] ARM: l2x0: add Marvell Tauros3 compatible Sebastian Hesselbarth
2013-10-08 13:41 ` Mark Rutland
2013-10-08 16:05 ` Sebastian Hesselbarth
2013-10-08 16:33 ` Gregory CLEMENT
2013-10-09 8:50 ` Mark Rutland
2013-10-09 9:14 ` Gregory CLEMENT
2013-10-09 19:27 ` Sebastian Hesselbarth
2013-10-11 9:05 ` Lennert Buytenhek
2013-10-17 6:37 ` [PATCH v2 3/8] ARM: l2x0: add Marvell Tauros3 support Sebastian Hesselbarth
2013-10-08 12:24 ` [PATCH 7/8] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files Sebastian Hesselbarth
2013-10-14 23:13 ` Sebastian Hesselbarth
2013-10-14 23:18 ` Sebastian Hesselbarth
2013-10-15 3:06 ` Jisheng Zhang
2013-10-17 6:37 ` [PATCH v2 " Sebastian Hesselbarth
2013-11-05 14:28 ` [PATCH v3 0/9] ARM: Initial support for Marvell Berlin SoCs Sebastian Hesselbarth
2013-11-05 14:28 ` [PATCH v3 1/9] irqchip: add DesignWare APB ICTL interrupt controller Sebastian Hesselbarth
[not found] ` <1383661723-17956-2-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-11-06 11:34 ` Thomas Gleixner
2013-11-05 14:28 ` [PATCH v3 3/9] ARM: l2x0: add Marvell Tauros3 support Sebastian Hesselbarth
2013-11-05 14:28 ` [PATCH v3 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files Sebastian Hesselbarth
2013-11-08 16:13 ` Kumar Gala
2013-11-08 16:57 ` Jason Cooper
2013-11-08 18:06 ` Kumar Gala
2013-11-08 18:24 ` Jason Cooper
[not found] ` <20131108182415.GG10335-u4khhh1J0LxI1Ri9qeTfzeTW4wlIGRCZ@public.gmane.org>
2013-11-08 19:14 ` Olof Johansson
2013-11-08 19:17 ` Sebastian Hesselbarth
2013-11-08 19:19 ` Olof Johansson
2013-11-08 19:30 ` Jason Cooper
2013-11-08 20:10 ` Olof Johansson
2013-11-08 20:29 ` Jason Cooper
2013-11-08 19:15 ` Sebastian Hesselbarth
2013-11-05 14:28 ` [PATCH v3 8/9] ARM: add Armada 1500-mini and Chromecast " Sebastian Hesselbarth
2013-11-07 5:48 ` Jisheng Zhang
2013-11-07 10:12 ` Sebastian Hesselbarth
2013-12-08 14:13 ` [PATCH v4 0/9] ARM: Initial support for Marvell Berlin SoCs Sebastian Hesselbarth
2013-12-08 14:13 ` Sebastian Hesselbarth [this message]
2013-12-08 14:14 ` [PATCH v4 3/9] ARM: l2x0: add Marvell Tauros3 support Sebastian Hesselbarth
2013-12-08 14:14 ` [PATCH v4 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files Sebastian Hesselbarth
[not found] ` <1386512047-874-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-12-08 14:14 ` [PATCH v4 8/9] ARM: add Armada 1500-mini and Chromecast " Sebastian Hesselbarth
2013-12-10 1:40 ` [PATCH v4 0/9] ARM: Initial support for Marvell Berlin SoCs Olof Johansson
2013-12-10 1:57 ` Sebastian Hesselbarth
2013-12-10 19:16 ` Olof Johansson
2013-12-10 19:33 ` Arnd Bergmann
[not found] ` <201312102033.00953.arnd-r2nGTMty4D4@public.gmane.org>
2013-12-10 19:38 ` Olof Johansson
2013-12-10 20:02 ` Sebastian Hesselbarth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386512047-874-2-git-send-email-sebastian.hesselbarth@gmail.com \
--to=sebastian.hesselbarth@gmail.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=olof@lixom.net \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).