From mboxrd@z Thu Jan  1 00:00:00 1970
From: Matt Porter <mporter@linaro.org>
Subject: [PATCH v4 2/9] staging: dwc2: update DT binding to add generic clock/phy properties
Date: Thu, 12 Dec 2013 06:18:30 -0500
Message-ID: <1386847117-21240-3-git-send-email-mporter@linaro.org>
References: <1386847117-21240-1-git-send-email-mporter@linaro.org>
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <1386847117-21240-1-git-send-email-mporter@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
To: Felipe Balbi <balbi@ti.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Kishon Vijay Abraham I <kishon@ti.com>, Rob Herring <rob.herring@calxeda.com>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Kumar Gala <galak@codeaurora.org>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Christian Daudt <bcm@fixthebug.org>, Paul Zimmerman <paulz@synopsys.com>
Cc: Tomasz Figa <t.figa@samsung.com>, Kamil Debski <k.debski@samsung.com>, Kyungmin Park <kyungmin.park@samsung.com>, Linux USB List <linux-usb@vger.kernel.org>, Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, Devicetree List <devicetree@vger.kernel.org>, Linaro Patches <patches@linaro.org>
List-Id: devicetree@vger.kernel.org

dwc2/s3c-hsotg require a single clock to be specified and optionally
a generic phy. On the s3c-hsotg driver old style USB phy support is
present as a fallback so the generic phy properties are optional.

Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/staging/dwc2.txt | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt
index 1a1b7cf..a1753ed 100644
--- a/Documentation/devicetree/bindings/staging/dwc2.txt
+++ b/Documentation/devicetree/bindings/staging/dwc2.txt
@@ -5,6 +5,14 @@ Required properties:
 - compatible : "snps,dwc2"
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
+- clocks: clock provider specifier
+- clock-names: shall be "otg"
+Refer to clk/clock-bindings.txt for generic clock consumer properties
+
+Optional properties:
+- phys: phy provider specifier
+- phy-names: shall be "device"
+Refer to phy/phy-bindings.txt for generic phy consumer properties
 
 Example:
 
@@ -12,4 +20,8 @@ Example:
                 compatible = "ralink,rt3050-usb, snps,dwc2";
                 reg = <0x101c0000 40000>;
                 interrupts = <18>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
         };
-- 
1.8.4