From: Peter Chen <peter.chen@freescale.com>
To: balbi@ti.com, shawn.guo@linaro.org, rob.herring@calxeda.com,
grant.likely@linaro.org
Cc: alexander.shishkin@linux.intel.com, linux-usb@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, festevam@gmail.com,
marex@denx.de, kernel@pengutronix.de, m.grzeschik@pengutronix.de,
frank.li@freescale.com, peter.chen@freescale.com,
gregkh@linuxfoundation.org, devicetree@vger.kernel.org,
linux-doc@vger.kernel.org
Subject: [PATCH v6 09/15] usb: phy-mxs: Enable IC fixes for related SoCs
Date: Fri, 13 Dec 2013 09:23:39 +0800 [thread overview]
Message-ID: <1386897825-6130-10-git-send-email-peter.chen@freescale.com> (raw)
In-Reply-To: <1386897825-6130-1-git-send-email-peter.chen@freescale.com>
Two PHY bugs are fixed by IC logic, but these bits are not
enabled by default, so we enable them at driver.
The two bugs are: MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
which are described at code.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
drivers/usb/phy/phy-mxs-usb.c | 23 +++++++++++++++++++++--
1 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index e3df53f..b446cc2 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -31,6 +31,10 @@
#define HW_USBPHY_CTRL_SET 0x34
#define HW_USBPHY_CTRL_CLR 0x38
+#define HW_USBPHY_IP 0x90
+#define HW_USBPHY_IP_SET 0x94
+#define HW_USBPHY_IP_CLR 0x98
+
#define BM_USBPHY_CTRL_SFTRST BIT(31)
#define BM_USBPHY_CTRL_CLKGATE BIT(30)
#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26)
@@ -42,6 +46,8 @@
#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
+#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18))
+
#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
/* Do disconnection between PHY and controller without vbus */
@@ -63,6 +69,14 @@
/* The SoCs who have anatop module */
#define MXS_PHY_HAS_ANATOP BIT(3)
+/*
+ * IC has bug fixes logic, they include
+ * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
+ * which are described at above flags, the RTL will handle it
+ * according to different versions.
+ */
+#define MXS_PHY_NEED_IP_FIX BIT(4)
+
struct mxs_phy_data {
unsigned int flags;
};
@@ -74,12 +88,14 @@ static const struct mxs_phy_data imx23_phy_data = {
static const struct mxs_phy_data imx6q_phy_data = {
.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
- MXS_PHY_HAS_ANATOP,
+ MXS_PHY_HAS_ANATOP |
+ MXS_PHY_NEED_IP_FIX,
};
static const struct mxs_phy_data imx6sl_phy_data = {
.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
- MXS_PHY_HAS_ANATOP,
+ MXS_PHY_HAS_ANATOP |
+ MXS_PHY_NEED_IP_FIX,
};
static const struct of_device_id mxs_phy_dt_ids[] = {
@@ -123,6 +139,9 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
BM_USBPHY_CTRL_ENUTMILEVEL3,
base + HW_USBPHY_CTRL_SET);
+ if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
+ writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
+
return 0;
}
--
1.7.8
next prev parent reply other threads:[~2013-12-13 1:23 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-13 1:23 [PATCH v6 00/15] Add power management support for mxs phy Peter Chen
2013-12-13 1:23 ` [PATCH v6 01/15] usb: doc: phy-mxs: Add more compatible strings Peter Chen
2013-12-13 7:15 ` Lothar Waßmann
2013-12-13 7:24 ` Peter Chen
2013-12-13 7:38 ` Lothar Waßmann
2013-12-13 7:58 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 02/15] usb: phy-mxs: Add platform judgement code Peter Chen
2013-12-13 4:19 ` Felipe Balbi
[not found] ` <20131213041918.GC867-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2013-12-13 5:15 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 03/15] usb: phy-mxs: Add auto clock and power setting Peter Chen
2013-12-13 4:23 ` Felipe Balbi
2013-12-13 5:55 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 04/15] usb: doc: phy-mxs: update binding for adding anatop phandle Peter Chen
2013-12-13 4:25 ` Felipe Balbi
[not found] ` <20131213042504.GE867-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2013-12-13 6:00 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 05/15] ARM: dts: imx6: add anatop phandle for usbphy Peter Chen
[not found] ` <1386897825-6130-1-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-12-13 1:23 ` [PATCH v6 06/15] usb: phy-mxs: Add anatop regmap Peter Chen
2013-12-13 4:26 ` Felipe Balbi
[not found] ` <20131213042627.GF867-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2013-12-13 6:04 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 07/15] usb: phy: add notify suspend and resume callback Peter Chen
[not found] ` <1386897825-6130-8-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-12-13 4:27 ` Felipe Balbi
[not found] ` <20131213042722.GG867-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2013-12-13 6:23 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume Peter Chen
2013-12-13 4:32 ` Felipe Balbi
2013-12-13 6:31 ` Peter Chen
2013-12-13 20:09 ` Felipe Balbi
2013-12-16 1:12 ` Peter Chen
2013-12-16 21:31 ` Felipe Balbi
2013-12-13 1:23 ` [PATCH v6 11/15] usb: phy-mxs: add controller id Peter Chen
2013-12-13 1:23 ` [PATCH v6 13/15] usb: phy-mxs: Add implementation of set_wakeup Peter Chen
2013-12-13 1:23 ` [PATCH v6 14/15] usb: phy-mxs: Add system suspend/resume API Peter Chen
2013-12-13 4:38 ` Felipe Balbi
[not found] ` <20131213043838.GI867-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2013-12-13 6:34 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 15/15] usb: phy-mxs: Add sync time after controller clear phcd Peter Chen
[not found] ` <1386897825-6130-16-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-12-13 4:39 ` Felipe Balbi
2013-12-13 6:50 ` Peter Chen
2013-12-13 1:23 ` Peter Chen [this message]
2013-12-13 1:23 ` [PATCH v6 10/15] ARM: dts: imx: add mxs phy controller id Peter Chen
2013-12-13 1:23 ` [PATCH v6 12/15] usb: phy: Add set_wakeup API Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386897825-6130-10-git-send-email-peter.chen@freescale.com \
--to=peter.chen@freescale.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frank.li@freescale.com \
--cc=grant.likely@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=m.grzeschik@pengutronix.de \
--cc=marex@denx.de \
--cc=rob.herring@calxeda.com \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).