From: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: balbi-l0cyMroinI0@public.gmane.org,
shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
marex-ynQEQJNshbs@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
frank.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v6 06/15] usb: phy-mxs: Add anatop regmap
Date: Fri, 13 Dec 2013 09:23:36 +0800 [thread overview]
Message-ID: <1386897825-6130-7-git-send-email-peter.chen@freescale.com> (raw)
In-Reply-To: <1386897825-6130-1-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
It is needed by imx6 SoC series, but not for imx23 and imx28.
Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
drivers/usb/phy/phy-mxs-usb.c | 23 +++++++++++++++++++++--
1 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 0c6f3bc..0ef930a 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -21,6 +21,8 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
#define DRIVER_NAME "mxs_phy"
@@ -58,6 +60,9 @@
*/
#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2)
+/* The SoCs who have anatop module */
+#define MXS_PHY_HAS_ANATOP BIT(3)
+
struct mxs_phy_data {
unsigned int flags;
};
@@ -68,11 +73,13 @@ static const struct mxs_phy_data imx23_phy_data = {
static const struct mxs_phy_data imx6q_phy_data = {
.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
- MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+ MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+ MXS_PHY_HAS_ANATOP,
};
static const struct mxs_phy_data imx6sl_phy_data = {
- .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+ .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+ MXS_PHY_HAS_ANATOP,
};
static const struct of_device_id mxs_phy_dt_ids[] = {
@@ -87,6 +94,7 @@ struct mxs_phy {
struct usb_phy phy;
struct clk *clk;
const struct mxs_phy_data *data;
+ struct regmap *regmap_anatop;
};
static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
@@ -190,6 +198,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
int ret;
const struct of_device_id *of_id =
of_match_device(mxs_phy_dt_ids, &pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
@@ -226,6 +235,16 @@ static int mxs_phy_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mxs_phy);
+ if (mxs_phy->data->flags & MXS_PHY_HAS_ANATOP) {
+ mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
+ (np, "fsl,anatop");
+ if (IS_ERR(mxs_phy->regmap_anatop)) {
+ dev_dbg(&pdev->dev,
+ "failed to find regmap for anatop\n");
+ return PTR_ERR(mxs_phy->regmap_anatop);
+ }
+ }
+
ret = usb_add_phy_dev(&mxs_phy->phy);
if (ret)
return ret;
--
1.7.8
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-12-13 1:23 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-13 1:23 [PATCH v6 00/15] Add power management support for mxs phy Peter Chen
2013-12-13 1:23 ` [PATCH v6 01/15] usb: doc: phy-mxs: Add more compatible strings Peter Chen
2013-12-13 7:15 ` Lothar Waßmann
2013-12-13 7:24 ` Peter Chen
2013-12-13 7:38 ` Lothar Waßmann
2013-12-13 7:58 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 02/15] usb: phy-mxs: Add platform judgement code Peter Chen
2013-12-13 4:19 ` Felipe Balbi
[not found] ` <20131213041918.GC867-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2013-12-13 5:15 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 03/15] usb: phy-mxs: Add auto clock and power setting Peter Chen
2013-12-13 4:23 ` Felipe Balbi
2013-12-13 5:55 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 04/15] usb: doc: phy-mxs: update binding for adding anatop phandle Peter Chen
2013-12-13 4:25 ` Felipe Balbi
[not found] ` <20131213042504.GE867-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2013-12-13 6:00 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 05/15] ARM: dts: imx6: add anatop phandle for usbphy Peter Chen
[not found] ` <1386897825-6130-1-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-12-13 1:23 ` Peter Chen [this message]
2013-12-13 4:26 ` [PATCH v6 06/15] usb: phy-mxs: Add anatop regmap Felipe Balbi
[not found] ` <20131213042627.GF867-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2013-12-13 6:04 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 07/15] usb: phy: add notify suspend and resume callback Peter Chen
[not found] ` <1386897825-6130-8-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-12-13 4:27 ` Felipe Balbi
[not found] ` <20131213042722.GG867-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2013-12-13 6:23 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume Peter Chen
2013-12-13 4:32 ` Felipe Balbi
2013-12-13 6:31 ` Peter Chen
2013-12-13 20:09 ` Felipe Balbi
2013-12-16 1:12 ` Peter Chen
2013-12-16 21:31 ` Felipe Balbi
2013-12-13 1:23 ` [PATCH v6 11/15] usb: phy-mxs: add controller id Peter Chen
2013-12-13 1:23 ` [PATCH v6 13/15] usb: phy-mxs: Add implementation of set_wakeup Peter Chen
2013-12-13 1:23 ` [PATCH v6 14/15] usb: phy-mxs: Add system suspend/resume API Peter Chen
2013-12-13 4:38 ` Felipe Balbi
[not found] ` <20131213043838.GI867-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2013-12-13 6:34 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 15/15] usb: phy-mxs: Add sync time after controller clear phcd Peter Chen
[not found] ` <1386897825-6130-16-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-12-13 4:39 ` Felipe Balbi
2013-12-13 6:50 ` Peter Chen
2013-12-13 1:23 ` [PATCH v6 09/15] usb: phy-mxs: Enable IC fixes for related SoCs Peter Chen
2013-12-13 1:23 ` [PATCH v6 10/15] ARM: dts: imx: add mxs phy controller id Peter Chen
2013-12-13 1:23 ` [PATCH v6 12/15] usb: phy: Add set_wakeup API Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386897825-6130-7-git-send-email-peter.chen@freescale.com \
--to=peter.chen-kzfg59tc24xl57midrcfdg@public.gmane.org \
--cc=alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=frank.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=marex-ynQEQJNshbs@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).