From mboxrd@z Thu Jan 1 00:00:00 1970 From: Grygorii Strashko Subject: [PATCH 3/4] arm: dts: keystone-evm: add LEDs supports Date: Mon, 16 Dec 2013 18:39:39 +0200 Message-ID: <1387211981-26045-4-git-send-email-grygorii.strashko@ti.com> References: <1387211981-26045-1-git-send-email-grygorii.strashko@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1387211981-26045-1-git-send-email-grygorii.strashko@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Santosh Shilimkar Cc: Rob Herring , Pawel Moll , Mark Rutland , Stephen Warren , Ian Campbell , Russell King , Olof Johansson , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Grygorii Strashko List-Id: devicetree@vger.kernel.org Keystone EVMK2HX supports 4 debug LEDs controlled by GPIO lines as following (active level is high); DBG_D1 green gpio12 DBG_D1 red gpio13 DBG_D1 blue gpio14 DBG_D1 blue gpio15 For more information see schematics: http://wfcache.advantech.com/www/support/TI-EVM/download/Schematics/PDF/K2H_K2EVM-HK_SCH_A102_Rev1_0.pdf Signed-off-by: Grygorii Strashko --- arch/arm/boot/dts/k2hk-evm.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts index 15b3a95..07bf1e9 100644 --- a/arch/arm/boot/dts/k2hk-evm.dts +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -52,4 +52,27 @@ }; }; }; + + leds { + compatible = "gpio-leds"; + debug1_1 { + label = "keystone:green:debug1"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */ + }; + + debug1_2 { + label = "keystone:red:debug1"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */ + }; + + debug2 { + label = "keystone:blue:debug2"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */ + }; + + debug3 { + label = "keystone:blue:debug3"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */ + }; + }; }; -- 1.7.9.5