devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Xiubo Li <Li.Xiubo@freescale.com>
To: lgirdwood@gmail.com, broonie@kernel.org, timur@tabi.org, perex@perex.cz
Cc: r64188@freescale.com, rob.herring@calxeda.com,
	pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org,
	ian.campbell@citrix.com, rob@landley.net, linux@arm.linux.org.uk,
	tiwai@suse.de, grant.likely@linaro.org,
	fabio.estevam@freescale.com, LW@KARO-electronics.de,
	oskar@scara.com, shawn.guo@linaro.org, b42378@freescale.com,
	b18965@freescale.com, devicetree@vger.kernel.org,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	alsa-devel@alsa-project.org
Subject: [PATCHv3 5/7] ASoC: fsl: Add SGTL5000 based audio machine driver.
Date: Tue, 17 Dec 2013 11:24:42 +0800	[thread overview]
Message-ID: <1387250684-23406-6-git-send-email-Li.Xiubo@freescale.com> (raw)
In-Reply-To: <1387250684-23406-1-git-send-email-Li.Xiubo@freescale.com>

This is the SGTL5000 codec based audio driver supported with both
playback and capture dai link implemention.

This implementation is only compatible with device tree definition.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Alison Wang <b18965@freescale.com
---
 sound/soc/fsl/Kconfig          |  22 +++++
 sound/soc/fsl/Makefile         |   4 +
 sound/soc/fsl/vf610-sgtl5000.c | 178 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 204 insertions(+)
 create mode 100644 sound/soc/fsl/vf610-sgtl5000.c

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index ac4fe4e..bb94c3c 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -217,3 +217,25 @@ config SND_SOC_IMX_MC13783
 	select SND_SOC_IMX_PCM_DMA
 
 endif # SND_IMX_SOC
+
+menuconfig SND_FSL_SOC
+	tristate "SoC Audio for Freescale VF610 CPUs"
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the VF610 CPUs.
+
+	  This will enable Freeacale SAI and SGTL5000 codec, and an extra
+	  TWR-AUDIO-SGTL sub-board is needed for SGTL5000.
+
+if SND_FSL_SOC
+
+config SND_SOC_VF610_SGTL5000
+	tristate "SoC Audio support for VF610 boards with SGTL5000"
+	depends on OF && I2C
+	select SND_SOC_FSL_SAI
+	select SND_SOC_SGTL5000
+	help
+	  Say Y if you want to add support for SoC audio on an VF610 board with
+	  a SGTL5000 codec and a SAI.
+
+endif # SND_FSL_SOC
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index aaccbee..96110d1 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -22,6 +22,10 @@ obj-$(CONFIG_SND_SOC_FSL_SPDIF) += snd-soc-fsl-spdif.o
 obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o
 obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
 
+# VF610 Platform Support
+snd-soc-vf610-sgtl5000-objs := vf610-sgtl5000.o
+obj-$(CONFIG_SND_SOC_VF610_SGTL5000) += snd-soc-vf610-sgtl5000.o
+
 # MPC5200 Platform Support
 obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o
 obj-$(CONFIG_SND_SOC_MPC5200_I2S) += mpc5200_psc_i2s.o
diff --git a/sound/soc/fsl/vf610-sgtl5000.c b/sound/soc/fsl/vf610-sgtl5000.c
new file mode 100644
index 0000000..75337bf
--- /dev/null
+++ b/sound/soc/fsl/vf610-sgtl5000.c
@@ -0,0 +1,178 @@
+/*
+ * Freescale ALSA SoC Audio using SGTL5000 as codec.
+ *
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include "../codecs/sgtl5000.h"
+#include "fsl_sai.h"
+
+static unsigned int sysclk_rate;
+
+static int vf610_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd)
+{
+	int ret;
+	struct device *dev = rtd->card->dev;
+
+	ret = snd_soc_dai_set_sysclk(rtd->codec_dai, SGTL5000_SYSCLK,
+				     sysclk_rate, SND_SOC_CLOCK_IN);
+	if (ret) {
+		dev_err(dev, "could not set codec driver clock params :%d\n",
+				ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, FSL_SAI_CLK_BUS,
+				     sysclk_rate, SND_SOC_CLOCK_OUT);
+	if (ret) {
+		dev_err(dev, "could not set cpu dai driver clock params :%d\n",
+				ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_dai_link vf610_sgtl5000_dai = {
+	.name = "HiFi",
+	.stream_name = "HiFi",
+	.codec_dai_name = "sgtl5000",
+	.init = &vf610_sgtl5000_dai_init,
+	.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBM_CFM,
+};
+
+static const struct snd_soc_dapm_widget vf610_sgtl5000_dapm_widgets[] = {
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_LINE("Line In Jack", NULL),
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_SPK("Line Out Jack", NULL),
+	SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+static struct snd_soc_card vf610_sgtl5000_card = {
+	.owner = THIS_MODULE,
+	.num_links = 1,
+	.dai_link = &vf610_sgtl5000_dai,
+	.dapm_widgets = vf610_sgtl5000_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(vf610_sgtl5000_dapm_widgets),
+};
+
+static int vf610_sgtl5000_parse_dt(struct platform_device *pdev)
+{
+	int ret;
+	struct device_node *sai_np, *codec_np;
+	struct clk *codec_clk;
+	struct i2c_client *codec_dev;
+	struct device_node *np = pdev->dev.of_node;
+
+	ret = snd_soc_of_parse_card_name(&vf610_sgtl5000_card, "model");
+	if (ret)
+		return ret;
+
+	ret = snd_soc_of_parse_audio_routing(&vf610_sgtl5000_card,
+			"audio-routing");
+	if (ret)
+		return ret;
+
+	sai_np = of_parse_phandle(np, "saif-controller", 0);
+	if (!sai_np) {
+		dev_err(&pdev->dev, "\"saif-controller\" phandle missing or "
+				"invalid\n");
+		return -EINVAL;
+	}
+	vf610_sgtl5000_dai.cpu_of_node = sai_np;
+	vf610_sgtl5000_dai.platform_of_node = sai_np;
+
+	codec_np = of_parse_phandle(np, "audio-codec", 0);
+	if (!codec_np) {
+		dev_err(&pdev->dev, "\"audio-codec\" phandle missing or "
+				"invalid\n");
+		ret = -EINVAL;
+		goto sai_np_fail;
+	}
+	vf610_sgtl5000_dai.codec_of_node = codec_np;
+
+	codec_dev = of_find_i2c_device_by_node(codec_np);
+	if (!codec_dev) {
+		dev_err(&pdev->dev, "failed to find codec platform device\n");
+		ret = PTR_ERR(codec_dev);
+		goto codec_np_fail;
+	}
+
+	codec_clk = devm_clk_get(&codec_dev->dev, NULL);
+	if (IS_ERR(codec_clk)) {
+		dev_err(&pdev->dev, "failed to get codec clock\n");
+		ret = PTR_ERR(codec_clk);
+		goto codec_np_fail;
+	}
+
+	sysclk_rate = clk_get_rate(codec_clk);
+
+codec_np_fail:
+	of_node_put(codec_np);
+sai_np_fail:
+	of_node_put(sai_np);
+
+	return ret;
+}
+
+static int vf610_sgtl5000_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	vf610_sgtl5000_card.dev = &pdev->dev;
+
+	ret = vf610_sgtl5000_parse_dt(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "parse sgtl5000 device tree failed :%d\n",
+				ret);
+		return ret;
+	}
+
+	ret = devm_snd_soc_register_card(&pdev->dev, &vf610_sgtl5000_card);
+	if (ret) {
+		dev_err(&pdev->dev, "TWR-AUDIO-SGTL board required :%d\n",
+				ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int vf610_sgtl5000_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static const struct of_device_id vf610_sgtl5000_dt_ids[] = {
+	{ .compatible = "fsl,vf610-sgtl5000", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vf610_sgtl5000_dt_ids);
+
+static struct platform_driver vf610_sgtl5000_driver = {
+	.driver = {
+		.name = "vf610-sgtl5000",
+		.owner = THIS_MODULE,
+		.of_match_table = vf610_sgtl5000_dt_ids,
+	},
+	.probe = vf610_sgtl5000_probe,
+	.remove = vf610_sgtl5000_remove,
+};
+module_platform_driver(vf610_sgtl5000_driver);
+
+MODULE_AUTHOR("Xiubo Li <Li.Xiubo@freescale.com>");
+MODULE_DESCRIPTION("Freescale SGTL5000 ASoC driver");
+MODULE_LICENSE("GPL");
-- 
1.8.4

  parent reply	other threads:[~2013-12-17  3:24 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-17  3:24 [PATCHv3 0/8] ALSA: Add SAI driver and enable SGT15000 codec Xiubo Li
2013-12-17  3:24 ` [PATCHv3 1/7] ALSA: Add SAI SoC Digital Audio Interface driver Xiubo Li
2013-12-18 18:27   ` Mark Brown
2013-12-19  3:16     ` Li.Xiubo
     [not found] ` <1387250684-23406-1-git-send-email-Li.Xiubo-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-12-17  3:24   ` [PATCHv3 2/7] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610 Xiubo Li
2013-12-17  3:24   ` [PATCHv3 3/7] ARM: dts: Enable SAI ALSA SoC DAI device for Vybrid VF610 TOWER board Xiubo Li
2013-12-17  3:24 ` [PATCHv3 4/7] Documentation: Add device tree bindings for Freescale SAI Xiubo Li
2013-12-18 18:31   ` Mark Brown
2013-12-20  2:42     ` Li.Xiubo
2013-12-17  3:24 ` Xiubo Li [this message]
2013-12-18 18:37   ` [PATCHv3 5/7] ASoC: fsl: Add SGTL5000 based audio machine driver Mark Brown
2013-12-19  5:19     ` Li.Xiubo
2013-12-19 10:25       ` Mark Brown
2013-12-20  2:37         ` Li.Xiubo
2013-12-17  3:24 ` [PATCHv3 6/7] ARM: dts: Enable SGTL5000 codec based audio driver node for VF610 TOWER Xiubo Li
2013-12-17  3:24 ` [PATCHv3 7/7] Documentation: Add device tree bindings for Freescale VF610 sound Xiubo Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1387250684-23406-6-git-send-email-Li.Xiubo@freescale.com \
    --to=li.xiubo@freescale.com \
    --cc=LW@KARO-electronics.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=b18965@freescale.com \
    --cc=b42378@freescale.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@freescale.com \
    --cc=grant.likely@linaro.org \
    --cc=ian.campbell@citrix.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=oskar@scara.com \
    --cc=pawel.moll@arm.com \
    --cc=perex@perex.cz \
    --cc=r64188@freescale.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    --cc=shawn.guo@linaro.org \
    --cc=swarren@wwwdotorg.org \
    --cc=timur@tabi.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).