From: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
To: Santosh Shilimkar <santosh.shilimkar@ti.com>,
Rob Landley <rob@landley.net>,
Russell King <linux@arm.linux.org.uk>
Cc: devicetree@vger.kernel.org, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <rob.herring@calxeda.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Kumar Gala <galak@kernel.crashing.org>,
ijc+devicetree@hellion.org.uk, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mtd@lists.infradead.org, grygorii.strashko@ti.com,
dwmw2@infradead.org, computersforpeace@gmail.com,
Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Subject: [PATCH v4 4/9] mtd: nand: davinci: simplify error handling
Date: Tue, 17 Dec 2013 15:37:00 +0200 [thread overview]
Message-ID: <1387287420-19802-1-git-send-email-ivan.khoronzhuk@ti.com> (raw)
In-Reply-To: <1387285155-19182-1-git-send-email-ivan.khoronzhuk@ti.com>
There is not needed to use a lot of names for err handling.
It complicates code support and reading.
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Taras Kondratiuk <taras@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
drivers/mtd/nand/davinci_nand.c | 46 +++++++++++++++------------------------
1 file changed, 17 insertions(+), 29 deletions(-)
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 9eea269..e6757b3 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -615,8 +615,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(&pdev->dev, "unable to allocate memory\n");
- ret = -ENOMEM;
- goto err_nomem;
+ return -ENOMEM;
}
platform_set_drvdata(pdev, info);
@@ -625,20 +624,16 @@ static int nand_davinci_probe(struct platform_device *pdev)
res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res1 || !res2) {
dev_err(&pdev->dev, "resource missing\n");
- ret = -EINVAL;
- goto err_nomem;
+ return -EINVAL;
}
vaddr = devm_ioremap_resource(&pdev->dev, res1);
- if (IS_ERR(vaddr)) {
- ret = PTR_ERR(vaddr);
- goto err_ioremap;
- }
+ if (IS_ERR(vaddr))
+ return PTR_ERR(vaddr);
+
base = devm_ioremap_resource(&pdev->dev, res2);
- if (IS_ERR(base)) {
- ret = PTR_ERR(base);
- goto err_ioremap;
- }
+ if (IS_ERR(base))
+ return PTR_ERR(base);
info->dev = &pdev->dev;
info->base = base;
@@ -705,7 +700,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
spin_unlock_irq(&davinci_nand_lock);
if (ret == -EBUSY)
- goto err_ecc;
+ return ret;
info->chip.ecc.calculate = nand_davinci_calculate_4bit;
info->chip.ecc.correct = nand_davinci_correct_4bit;
@@ -721,8 +716,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
info->chip.ecc.strength = pdata->ecc_bits;
break;
default:
- ret = -EINVAL;
- goto err_ecc;
+ return -EINVAL;
}
info->chip.ecc.mode = ecc_mode;
@@ -730,7 +724,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
if (IS_ERR(info->clk)) {
ret = PTR_ERR(info->clk);
dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
- goto err_clk;
+ return ret;
}
ret = clk_prepare_enable(info->clk);
@@ -759,7 +753,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
info->core_chipsel);
if (ret < 0) {
dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
- goto err_timing;
+ goto err;
}
spin_lock_irq(&davinci_nand_lock);
@@ -775,7 +769,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1, NULL);
if (ret < 0) {
dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
- goto err_scan;
+ goto err;
}
/* Update ECC layout if needed ... for 1-bit HW ECC, the default
@@ -789,7 +783,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
if (!chunks || info->mtd.oobsize < 16) {
dev_dbg(&pdev->dev, "too small\n");
ret = -EINVAL;
- goto err_scan;
+ goto err;
}
/* For small page chips, preserve the manufacturer's
@@ -820,7 +814,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "no 4-bit ECC support yet "
"for 4KiB-page NAND\n");
ret = -EIO;
- goto err_scan;
+ goto err;
syndrome_done:
info->chip.ecc.layout = &info->ecclayout;
@@ -828,7 +822,7 @@ syndrome_done:
ret = nand_scan_tail(&info->mtd);
if (ret < 0)
- goto err_scan;
+ goto err;
if (pdata->parts)
ret = mtd_device_parse_register(&info->mtd, NULL, NULL,
@@ -841,7 +835,7 @@ syndrome_done:
NULL, 0);
}
if (ret < 0)
- goto err_scan;
+ goto err;
val = davinci_nand_readl(info, NRCSR_OFFSET);
dev_info(&pdev->dev, "controller rev. %d.%d\n",
@@ -849,8 +843,7 @@ syndrome_done:
return 0;
-err_scan:
-err_timing:
+err:
clk_disable_unprepare(info->clk);
err_clk_enable:
@@ -858,11 +851,6 @@ err_clk_enable:
if (ecc_mode == NAND_ECC_HW_SYNDROME)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
-
-err_ecc:
-err_clk:
-err_ioremap:
-err_nomem:
return ret;
}
--
1.7.9.5
next prev parent reply other threads:[~2013-12-17 13:37 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 12:59 [PATCH v4 0/9] Reuse davinci-nand driver for Keystone arch Ivan Khoronzhuk
[not found] ` <1387285155-19182-1-git-send-email-ivan.khoronzhuk-l0cyMroinI0@public.gmane.org>
2013-12-17 13:33 ` [PATCH v4 1/9] mtd: nand: davinci: fix driver registration Ivan Khoronzhuk
2013-12-17 13:36 ` [PATCH v4 3/9] mtd: nand: davinci: check required ti,davinci-chipselect property Ivan Khoronzhuk
2013-12-17 13:37 ` [PATCH v4 5/9] mtd: nand: davinci: move bindings under mtd Ivan Khoronzhuk
2013-12-17 13:36 ` [PATCH v4 2/9] mtd: nand: davinci: return ENOMEM if memory allocation is failed Ivan Khoronzhuk
2013-12-17 13:37 ` Ivan Khoronzhuk [this message]
2013-12-17 13:37 ` [PATCH v4 6/9] mtd: nand: davinci: extend description of bindings Ivan Khoronzhuk
2013-12-17 13:37 ` [PATCH v4 7/9] mtd: nand: davinci: adjust DT properties to MTD generic Ivan Khoronzhuk
2013-12-17 13:38 ` [PATCH v4 8/9] mtd: nand: davinci: reuse driver for Keystone arch Ivan Khoronzhuk
2013-12-17 13:38 ` [PATCH v4 9/9] mtd: nand: davinci: don't request AEMIF address range Ivan Khoronzhuk
2013-12-18 7:14 ` [PATCH v4 0/9] Reuse davinci-nand driver for Keystone arch Brian Norris
2013-12-18 11:09 ` ivan.khoronzhuk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387287420-19802-1-git-send-email-ivan.khoronzhuk@ti.com \
--to=ivan.khoronzhuk@ti.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=galak@kernel.crashing.org \
--cc=grygorii.strashko@ti.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=santosh.shilimkar@ti.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).