From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eric Brower Subject: [PATCH 1/2] ARM: tegra: modify Tegra30 USB2 default phy_type to UTMI Date: Tue, 17 Dec 2013 17:52:44 -0800 Message-ID: <1387331565-3994-1-git-send-email-ebrower@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org Cc: thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Eric Brower List-Id: devicetree@vger.kernel.org Modify Tegra30 default USB2 phy_type to UTMI; this matches power-on-reset defaults and is expected to be the common case. The current implementation is likely an incorrect carry-over from Tegra20, where USB2 does default to ULPI. Signed-off-by: Eric Brower --- No upstream Tegra30 dts files reference USB2, so this should be a safe change; anyone using an out-of-tree dts with USB2, sparsely populated from the Tegra30 dtsi, may have an issue. arch/arm/boot/dts/tegra30.dtsi | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 2bd55cf..bedd379 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -669,7 +669,7 @@ compatible = "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x7d004000 0x4000>; interrupts = ; - phy_type = "ulpi"; + phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB2>; nvidia,phy = <&phy2>; status = "disabled"; @@ -677,12 +677,23 @@ phy2: usb-phy@7d004000 { compatible = "nvidia,tegra30-usb-phy"; - reg = <0x7d004000 0x4000>; - phy_type = "ulpi"; + reg = <0x7d004000 0x4000 0x7d004000 0x4000>; + phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB2>, <&tegra_car TEGRA30_CLK_PLL_U>, - <&tegra_car TEGRA30_CLK_CDEV2>; - clock-names = "reg", "pll_u", "ulpi-link"; + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; status = "disabled"; }; -- 1.8.1.5