From: Jonas Jensen <jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
peter.crosthwaite-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org,
Jonas Jensen
<jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v6 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files
Date: Wed, 18 Dec 2013 13:58:46 +0100 [thread overview]
Message-ID: <1387371526-15309-3-git-send-email-jonas.jensen@gmail.com> (raw)
In-Reply-To: <1387371526-15309-1-git-send-email-jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Add a generic (dtsi) include file for MOXA ART SoCs.
Also add a file for UC-7112-LX.
Signed-off-by: Jonas Jensen <jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Documentation/devicetree/bindings/arm/moxart.txt | 12 ++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/moxart-uc7112lx.dts | 109 ++++++++++++++++
arch/arm/boot/dts/moxart.dtsi | 154 +++++++++++++++++++++++
4 files changed, 276 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/moxart.txt
create mode 100644 arch/arm/boot/dts/moxart-uc7112lx.dts
create mode 100644 arch/arm/boot/dts/moxart.dtsi
diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt
new file mode 100644
index 0000000..11087ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/moxart.txt
@@ -0,0 +1,12 @@
+MOXA ART device tree bindings
+
+Boards with the MOXA ART SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "moxa,moxart";
+
+Boards:
+
+- UC-7112-LX: embedded computer
+ compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart"
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 16f0c5c..b95a9c6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -110,6 +110,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
+dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
new file mode 100644
index 0000000..90749d5
--- /dev/null
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -0,0 +1,109 @@
+/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+/include/ "moxart.dtsi"
+
+/ {
+ model = "MOXA UC-7112-LX";
+ compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ flash@80000000,0 {
+ compatible = "numonyx,js28f128", "cfi-flash";
+ reg = <0x80000000 0x1000000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x40000>;
+ };
+ partition@40000 {
+ label = "linux kernel";
+ reg = <0x40000 0x1C0000>;
+ };
+ partition@200000 {
+ label = "root filesystem";
+ reg = <0x200000 0x800000>;
+ };
+ partition@a00000 {
+ label = "user filesystem";
+ reg = <0xa00000 0x600000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ user-led {
+ label = "ready-led";
+ gpios = <&gpio 27 0x1>;
+ default-state = "on";
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ gpio_keys_polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <500>;
+ button@25 {
+ label = "GPIO Reset";
+ linux,code = <116>;
+ gpios = <&gpio 25 1>;
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
+ };
+};
+
+&clk_pll {
+ clocks = <&ref12>;
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ ethphy0: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ ethphy1: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mac0 {
+ status = "okay";
+};
+
+&mac1 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
new file mode 100644
index 0000000..da1d8ef
--- /dev/null
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -0,0 +1,154 @@
+/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "moxa,moxart";
+ model = "MOXART";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "faraday,fa526";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ref12: ref12M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x90000000 0x10000000>;
+ ranges;
+
+ intc: interrupt-controller@98800000 {
+ compatible = "moxa,moxart-ic";
+ reg = <0x98800000 0x38>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-mask = <0x00080000>;
+ };
+
+ clk_pll: clk_pll@98100000 {
+ compatible = "moxa,moxart-pll-clock";
+ #clock-cells = <0>;
+ reg = <0x98100000 0x34>;
+ };
+
+ clk_apb: clk_apb@98100000 {
+ compatible = "moxa,moxart-apb-clock";
+ #clock-cells = <0>;
+ reg = <0x98100000 0x34>;
+ clocks = <&clk_pll>;
+ };
+
+ timer: timer@98400000 {
+ compatible = "moxa,moxart-timer";
+ reg = <0x98400000 0x42>;
+ interrupts = <19 1>;
+ clocks = <&clk_apb>;
+ };
+
+ gpio: gpio@98700000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "moxa,moxart-gpio";
+ reg = <0x98700000 0xC>;
+ };
+
+ rtc: rtc {
+ compatible = "moxa,moxart-rtc";
+ gpio-rtc-sclk = <&gpio 5 0>;
+ gpio-rtc-data = <&gpio 6 0>;
+ gpio-rtc-reset = <&gpio 7 0>;
+ };
+
+ dma: dma@90500000 {
+ compatible = "moxa,moxart-dma";
+ reg = <0x90500080 0x40>;
+ interrupts = <24 0>;
+ #dma-cells = <1>;
+ };
+
+ watchdog: watchdog@98500000 {
+ compatible = "moxa,moxart-watchdog";
+ reg = <0x98500000 0x10>;
+ clocks = <&clk_apb>;
+ };
+
+ sdhci: sdhci@98e00000 {
+ compatible = "moxa,moxart-sdhci";
+ reg = <0x98e00000 0x5C>;
+ interrupts = <5 0>;
+ clocks = <&clk_apb>;
+ dmas = <&dma 5>,
+ <&dma 5>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mdio0: mdio@90900090 {
+ compatible = "moxa,moxart-mdio";
+ reg = <0x90900090 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mdio1: mdio@92000090 {
+ compatible = "moxa,moxart-mdio";
+ reg = <0x92000090 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mac0: mac@90900000 {
+ compatible = "moxa,moxart-mac";
+ reg = <0x90900000 0x90>;
+ interrupts = <25 0>;
+ phy-handle = <ðphy0>;
+ phy-mode = "mii";
+ status = "disabled";
+ };
+
+ mac1: mac@92000000 {
+ compatible = "moxa,moxart-mac";
+ reg = <0x92000000 0x90>;
+ interrupts = <27 0>;
+ phy-handle = <ðphy1>;
+ phy-mode = "mii";
+ status = "disabled";
+ };
+
+ uart0: uart@98200000 {
+ compatible = "ns16550a";
+ reg = <0x98200000 0x20>;
+ interrupts = <31 8>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <14745600>;
+ status = "disabled";
+ };
+ };
+};
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-12-18 12:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-18 12:58 [PATCH v6 0/2] ARM: mach-moxart: add MOXA ART SoC support Jonas Jensen
[not found] ` <1387371526-15309-1-git-send-email-jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-12-18 12:58 ` [PATCH v6 1/2] ARM: mach-moxart: add MOXA ART SoC platform files Jonas Jensen
2013-12-18 12:58 ` Jonas Jensen [this message]
2013-12-18 23:41 ` [PATCH v6 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files Peter Crosthwaite
2013-12-19 10:58 ` Jonas Jensen
2013-12-18 17:26 ` [PATCH v6 0/2] ARM: mach-moxart: add MOXA ART SoC support Sören Brinkmann
2013-12-22 19:56 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387371526-15309-3-git-send-email-jonas.jensen@gmail.com \
--to=jonas.jensen-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=peter.crosthwaite-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).