[PATCH v2 1/1] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board

[PATCH v2 1/1] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board

[Alex Ling]

Add a minimal board dts file for EXYNOS4412 based FriendlyARM's
TINY4412 board. This patch including support peripherals like
UART, SD card on SDMMC2 port and GPIO connected LEDs.

Signed-off-by: Alex Ling <kasimling@gmail.com>
---
Changes for v2:
  - Clean up patch description
  - Fix LED labels as Tomasz's suggested
  - Fix style issues

 arch/arm/boot/dts/Makefile                |    1 +
 arch/arm/boot/dts/exynos4412-tiny4412.dts |   93 +++++++++++++++++++++++++++++
 2 files changed, 94 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos4412-tiny4412.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 50fd70b..cfee1ef 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -59,6 +59,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4412-odroidx.dtb \
 	exynos4412-origen.dtb \
 	exynos4412-smdk4412.dtb \
+	exynos4412-tiny4412.dtb \
 	exynos4412-trats2.dtb \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
new file mode 100644
index 0000000..0a98312
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -0,0 +1,93 @@
+/*
+ * FriendlyARM's Exynos4412 based TINY4412 board device tree source
+ *
+ * Copyright (c) 2013 Alex Ling <kasimling@gmail.com>
+ *
+ * Device tree source file for FriendlyARM's TINY4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+	model = "FriendlyARM TINY4412 board based on Exynos4412";
+	compatible = "friendlyarm,tiny4412", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpm4 0 1>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpm4 1 1>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpm4 2 1>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "led4";
+			gpios = <&gpm4 3 1>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
-- 
1.7.9.5

Re: [PATCH v2 1/1] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board

[Tomasz Figa]

Hi Alex,

On Wednesday 18 of December 2013 21:23:59 Alex Ling wrote:
> Add a minimal board dts file for EXYNOS4412 based FriendlyARM's
> TINY4412 board. This patch including support peripherals like
> UART, SD card on SDMMC2 port and GPIO connected LEDs.
> 
> Signed-off-by: Alex Ling <kasimling@gmail.com>
> ---
> Changes for v2:
>   - Clean up patch description
>   - Fix LED labels as Tomasz's suggested
>   - Fix style issues
> 
>  arch/arm/boot/dts/Makefile                |    1 +
>  arch/arm/boot/dts/exynos4412-tiny4412.dts |   93 +++++++++++++++++++++++++++++
>  2 files changed, 94 insertions(+)
>  create mode 100644 arch/arm/boot/dts/exynos4412-tiny4412.dts

Reviewed-by: Tomasz Figa <t.figa@samsung.com>

Best regards,
Tomasz

Re: [PATCH v2 1/1] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board

[Kukjin Kim]

On 12/19/13 00:01, Tomasz Figa wrote:
> Hi Alex,
>
Hi,

> On Wednesday 18 of December 2013 21:23:59 Alex Ling wrote:
>> Add a minimal board dts file for EXYNOS4412 based FriendlyARM's
>> TINY4412 board. This patch including support peripherals like
>> UART, SD card on SDMMC2 port and GPIO connected LEDs.
>>
>> Signed-off-by: Alex Ling<kasimling@gmail.com>
>> ---
>> Changes for v2:
>>    - Clean up patch description
>>    - Fix LED labels as Tomasz's suggested
>>    - Fix style issues
>>
>>   arch/arm/boot/dts/Makefile                |    1 +
>>   arch/arm/boot/dts/exynos4412-tiny4412.dts |   93 +++++++++++++++++++++++++++++
>>   2 files changed, 94 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/exynos4412-tiny4412.dts
>
> Reviewed-by: Tomasz Figa<t.figa@samsung.com>
>
Thanks, applied.

- Kukjin