[PATCHv11 00/49] ARM: TI SoC clock DT conversion

[PATCHv11 00/49] ARM: TI SoC clock DT conversion

[Tero Kristo]

Hi,

So, once again new series. I guess I should have addressed all comments
for v10 except the extern sharing of __clk_of_table. Based on discussion
with Mike, this should be fine to fix later.

Main changes compared to v10:
- rebased on top of 3.13-rc4
- applied clk_desc support from Mike, did some cleanups and additions to that
  * needed for below item, clk_ll_ops
- added support for clk_ll_ops, and removed SoC wide clock ops
  * used for wrapping the IP block specific register access routines now
- removed need for separate init function types because of above two points,
  TI clocks also use the standard prototype now, no return value needed
- cleaned up the init retry logic for TI clocks a bit (DPLL/APLL)
- added clocks {} and clockdomains {} nodes under the master clock IP nodes,
  which are used to group clocks and domains accordingly
- changed compatible strings for clock master IPs from ti,clock-master to
  something of form ti,omap4-prm etc.

omap3 legacy clock data is not removed with this series, this can be done
later (basically I want someone to test all the possible omap3 boards out
there with DT boot before attempting this.)

Testing done:
- omap3-beagle: boot, suspend-resume (ret), suspend-resume (off)
- omap4-panda-es: boot, suspend-resume (ret)
- omap5-uevm: boot
- dra7-evm: boot
- am335x-bone: boot

Branches again available here:
https://github.com/t-kristo/linux-pm.git

branch: 3.13-rc4-dt-clks-v11 : contains everything, shall me merged last
branch: 3.13-rc4-dt-clks-v11-for-mike : drivers/clk changes
branch: 3.13-rc4-dt-clks-v11-for-benoit : DT data only

-Tero

[PATCHv11 01/49] clk: add support for registering clocks from description

[Tero Kristo]

From: Mike Turquette <mturquetter@linaro.org>

clk_register_desc is the primary interface for populating the clock tree
with new clock nodes. In time, this will replace the various hardware-specific
registration functions (e.g. clk_register_gate).

Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/clk.c            |   71 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk-provider.h |   23 ++++++++++++++
 2 files changed, 94 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 2cf2ea6..29281f6 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1905,6 +1905,77 @@ fail_out:
 EXPORT_SYMBOL_GPL(clk_register);
 
 /**
+ * clk_register_desc - register a new clock from its description
+ * @dev: device that is registering this clock
+ * @desc: description of the clock, may be __initdata or otherwise discarded
+ *
+ * clk_register_desc is the primary interface for populating the clock tree
+ * with new clock nodes. In time it will replace the various hardware-specific
+ * registration functions (e.g. clk_register_gate). clk_register_desc returns a
+ * pointer to the newly allocated struct clk which is an opaque cookie. Drivers
+ * must not dereference it except to check with IS_ERR.
+ */
+struct clk *clk_register_desc(struct device *dev, struct clk_desc *desc)
+{
+	int ret, i;
+	struct clk *clk;
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+
+	if (!clk)
+		return ERR_PTR(-ENOMEM);
+
+	clk->hw = desc->register_func(dev, desc);
+	clk->hw->clk = clk;
+
+	/* _clk_register */
+	clk->name = kstrdup(desc->name, GFP_KERNEL);
+	if (!clk->name) {
+		ret = -ENOMEM;
+		goto fail_name;
+	}
+
+	clk->ops = desc->ops;
+	clk->flags = desc->flags;
+	clk->num_parents = desc->num_parents;
+
+	/* allocate local copy in case parent_names is __initdata */
+	clk->parent_names = kcalloc(clk->num_parents, sizeof(char *),
+				    GFP_KERNEL);
+
+	if (!clk->parent_names) {
+		ret = -ENOMEM;
+		goto fail_parent_names;
+	}
+
+	/* copy each string name in case parent_names is __initdata */
+	for (i = 0; i < clk->num_parents; i++) {
+		clk->parent_names[i] = kstrdup(desc->parent_names[i],
+					       GFP_KERNEL);
+
+		if (!clk->parent_names[i]) {
+			ret = -ENOMEM;
+			goto fail_parent_names_copy;
+		}
+	}
+
+	ret = __clk_init(dev, clk);
+
+	if (!ret)
+		return clk;
+
+fail_parent_names_copy:
+	while (--i >= 0)
+		kfree(clk->parent_names[i]);
+	kfree(clk->parent_names);
+fail_parent_names:
+	kfree(clk->name);
+fail_name:
+	kfree(clk);
+	return ERR_PTR(ret);
+}
+
+/**
  * clk_unregister - unregister a currently registered clock
  * @clk: clock to unregister
  *
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7e59253..7fddcb3 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -161,6 +161,28 @@ struct clk_init_data {
 };
 
 /**
+ * struct clk_desc - clock init descriptor for providing init time parameters
+ * for a clock.
+ *
+ * @name: clock name
+ * @ops: clock ops
+ * @parent_names: array of string names for all possible parents
+ * @num_parents: number of possible parents
+ * @flags: framework-level hints and quirks
+ * @register_func: function for parsing the clock descriptor and providing
+ *		   ready-to-register clk_hw
+ */
+struct clk_desc {
+	const char		*name;
+	const struct clk_ops	*ops;
+	const char		**parent_names;
+	u8			num_parents;
+	unsigned long		flags;
+	struct clk_hw *(*register_func)(struct device *dev,
+					struct clk_desc *desc);
+};
+
+/**
  * struct clk_hw - handle for traversing from a struct clk to its corresponding
  * hardware-specific structure.  struct clk_hw should be declared within struct
  * clk_foo and then referenced by the struct clk instance that uses struct
@@ -419,6 +441,7 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
  * error code; drivers must test for an error code after calling clk_register.
  */
 struct clk *clk_register(struct device *dev, struct clk_hw *hw);
+struct clk *clk_register_desc(struct device *dev, struct clk_desc *desc);
 struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);
 
 void clk_unregister(struct clk *clk);
-- 
1.7.9.5

Re: [PATCHv11 01/49] clk: add support for registering clocks from description

[Paul Walmsley]

On Thu, 19 Dec 2013, Tero Kristo wrote:

> From: Mike Turquette <mturquetter@linaro.org>

Is this E-mail address correct?  It's one byte off of the Signed-off-by: 
address.

> clk_register_desc is the primary interface for populating the clock tree
> with new clock nodes. In time, this will replace the various hardware-specific
> registration functions (e.g. clk_register_gate).
> 
> Signed-off-by: Mike Turquette <mturquette@linaro.org>
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---

...

> 
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 2cf2ea6..29281f6 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -1905,6 +1905,77 @@ fail_out:
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 7e59253..7fddcb3 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -161,6 +161,28 @@ struct clk_init_data {
>  };
>  
>  /**
> + * struct clk_desc - clock init descriptor for providing init time parameters
> + * for a clock.
> + *
> + * @name: clock name

As mentioned in 

http://patchwork.ozlabs.org/patch/294253/

please remove the blank line between the summary line and the arguments.  
Documentation/kernel-doc-nano.txt says:

"The @argument descriptions must begin on the very next line following
this opening short function description line, with no intervening
empty comment lines."


- Paul

Re: [PATCHv11 01/49] clk: add support for registering clocks from description

[Tero Kristo]

On 12/20/2013 12:53 PM, Paul Walmsley wrote:
> On Thu, 19 Dec 2013, Tero Kristo wrote:
>
>> From: Mike Turquette <mturquetter@linaro.org>
>
> Is this E-mail address correct?  It's one byte off of the Signed-off-by:
> address.

No it is not, just my typo there. :P Will fix that for next rev.

>
>> clk_register_desc is the primary interface for populating the clock tree
>> with new clock nodes. In time, this will replace the various hardware-specific
>> registration functions (e.g. clk_register_gate).
>>
>> Signed-off-by: Mike Turquette <mturquette@linaro.org>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>
> ...
>
>>
>> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
>> index 2cf2ea6..29281f6 100644
>> --- a/drivers/clk/clk.c
>> +++ b/drivers/clk/clk.c
>> @@ -1905,6 +1905,77 @@ fail_out:
>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
>> index 7e59253..7fddcb3 100644
>> --- a/include/linux/clk-provider.h
>> +++ b/include/linux/clk-provider.h
>> @@ -161,6 +161,28 @@ struct clk_init_data {
>>   };
>>
>>   /**
>> + * struct clk_desc - clock init descriptor for providing init time parameters
>> + * for a clock.
>> + *
>> + * @name: clock name
>
> As mentioned in
>
> http://patchwork.ozlabs.org/patch/294253/
>
> please remove the blank line between the summary line and the arguments.
> Documentation/kernel-doc-nano.txt says:

Yeah, will do similar changes to other patches also.

-Tero

>
> "The @argument descriptions must begin on the very next line following
> this opening short function description line, with no intervening
> empty comment lines."
>
>
> - Paul
>

[PATCHv11 03/49] clk: divider: add support for registering divider clock from descriptor

[Tero Kristo]

New clk_register_desc() call can be used to register this clock type now.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/clk-divider.c    |   34 ++++++++++++++++++++++++++++++++++
 include/linux/clk-provider.h |   23 +++++++++++++++++++++++
 2 files changed, 57 insertions(+)

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 8d3009e..8cfed5c 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -28,8 +28,12 @@
  * parent - fixed parent.  No clk_set_parent support
  */
 
+/* resolve struct clk_divider from inner struct clk_hw member */
 #define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
 
+/* resolve struct clk_divider_desc from inner struct clk_desc member */
+#define to_hw_desc(_desc) container_of(_desc, struct clk_divider_desc, desc)
+
 #define div_mask(d)	((1 << ((d)->width)) - 1)
 
 static unsigned int _get_table_maxdiv(const struct clk_div_table *table)
@@ -343,3 +347,33 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
 			width, clk_divider_flags, table, lock);
 }
 EXPORT_SYMBOL_GPL(clk_register_divider_table);
+
+struct clk_hw *clk_register_divider_desc(struct device *dev,
+					 struct clk_desc *desc)
+{
+	struct clk_divider *divider;
+	struct clk_divider_desc *hw_desc;
+
+	hw_desc = to_hw_desc(desc);
+
+	/* allocate divider clock */
+	divider = kzalloc(sizeof(*divider), GFP_KERNEL);
+	if (!divider)
+		return ERR_PTR(-ENOMEM);
+
+	/* populate struct clk_divider assignments */
+	divider->reg = hw_desc->reg;
+	divider->shift = hw_desc->shift;
+	divider->width = hw_desc->width;
+	divider->flags = hw_desc->flags;
+	divider->table = hw_desc->table;
+	divider->lock = hw_desc->lock;
+
+	if (!desc->ops)
+		desc->ops = &clk_divider_ops;
+
+	desc->flags |= CLK_IS_BASIC;
+
+	return &divider->hw;
+}
+EXPORT_SYMBOL_GPL(clk_register_divider_desc);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 82dfe84..9fa279d 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -323,11 +323,34 @@ struct clk_divider {
 	spinlock_t	*lock;
 };
 
+/**
+ * struct clk_divider_desc - init descriptor for divider clock
+ *
+ * @desc:	handle between common and hardware-specific interfaces
+ * @reg:	register containing the divider
+ * @shift:	shift to the divider bit field
+ * @width:	width of the divider bit field
+ * @table:	array of value/divider pairs, last entry should have div = 0
+ * @lock:	register lock
+ */
+struct clk_divider_desc {
+	struct clk_desc	desc;
+	void __iomem	*reg;
+	u8		shift;
+	u8		width;
+	u8		flags;
+	const struct clk_div_table	*table;
+	spinlock_t	*lock;
+};
+
 #define CLK_DIVIDER_ONE_BASED		BIT(0)
 #define CLK_DIVIDER_POWER_OF_TWO	BIT(1)
 #define CLK_DIVIDER_ALLOW_ZERO		BIT(2)
 #define CLK_DIVIDER_HIWORD_MASK		BIT(3)
 
+struct clk_hw *clk_register_divider_desc(struct device *dev,
+					 struct clk_desc *desc);
+
 extern const struct clk_ops clk_divider_ops;
 struct clk *clk_register_divider(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
-- 
1.7.9.5

Re: [PATCHv11 03/49] clk: divider: add support for registering divider clock from descriptor

[Paul Walmsley]

On Thu, 19 Dec 2013, Tero Kristo wrote:

> New clk_register_desc() call can be used to register this clock type now.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 82dfe84..9fa279d 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -323,11 +323,34 @@ struct clk_divider {
>  	spinlock_t	*lock;
>  };
>  
> +/**
> + * struct clk_divider_desc - init descriptor for divider clock
> + *
> + * @desc:	handle between common and hardware-specific interfaces

As mentioned in

http://patchwork.ozlabs.org/patch/294253/

please remove the blank line between the summary line and the arguments.
Documentation/kernel-doc-nano.txt says:

"The @argument descriptions must begin on the very next line following
this opening short function description line, with no intervening
empty comment lines."



- Paul

[PATCHv11 04/49] clk: mux: add support for registering mux clock from descriptor

[Tero Kristo]

New clk_register_desc() call can be used to register this clock type now.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/clk-mux.c        |   37 +++++++++++++++++++++++++++++++++++++
 include/linux/clk-provider.h |   21 +++++++++++++++++++++
 2 files changed, 58 insertions(+)

diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 4f96ff3..2cbed08 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -27,8 +27,12 @@
  * parent - parent is adjustable through clk_set_parent
  */
 
+/* resolve struct clk_mux from inner struct clk_hw member */
 #define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
 
+/* resolve struct clk_mux_desc from inner struct clk_desc member */
+#define to_hw_desc(_desc) container_of(_desc, struct clk_mux_desc, desc)
+
 static u8 clk_mux_get_parent(struct clk_hw *hw)
 {
 	struct clk_mux *mux = to_clk_mux(hw);
@@ -177,3 +181,36 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 				      NULL, lock);
 }
 EXPORT_SYMBOL_GPL(clk_register_mux);
+
+struct clk_hw *clk_register_mux_desc(struct device *dev, struct clk_desc *desc)
+{
+	struct clk_mux *mux;
+	struct clk_mux_desc *hw_desc;
+
+	hw_desc = to_hw_desc(desc);
+
+	/* allocate mux clock */
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return ERR_PTR(-ENOMEM);
+
+	/* populate struct clk_mux assignments */
+	mux->reg = hw_desc->reg;
+	mux->table = hw_desc->table;
+	mux->mask = hw_desc->mask;
+	mux->shift = hw_desc->shift;
+	mux->flags = hw_desc->flags;
+	mux->lock = hw_desc->lock;
+
+	if (!desc->ops) {
+		if (mux->flags & CLK_MUX_READ_ONLY)
+			desc->ops = &clk_mux_ro_ops;
+		else
+			desc->ops = &clk_mux_ops;
+	}
+
+	desc->flags |= CLK_IS_BASIC;
+
+	return &mux->hw;
+}
+EXPORT_SYMBOL_GPL(clk_register_mux_desc);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 9fa279d..7dd6842 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -393,6 +393,26 @@ struct clk_mux {
 	spinlock_t	*lock;
 };
 
+/**
+ * struct clk_mux_desc - init descriptor for multiplexer clock
+ *
+ * @desc:	handle between common and hardware-specific interfaces
+ * @reg:	register controlling multiplexer
+ * @shift:	shift to multiplexer bit field
+ * @width:	width of multiplexer bit field
+ * @flags:	hardware-specific flags
+ * @lock:	register lock
+ */
+struct clk_mux_desc {
+	struct clk_desc	desc;
+	void __iomem	*reg;
+	u32		*table;
+	u32		mask;
+	u8		shift;
+	u8		flags;
+	spinlock_t	*lock;
+};
+
 #define CLK_MUX_INDEX_ONE		BIT(0)
 #define CLK_MUX_INDEX_BIT		BIT(1)
 #define CLK_MUX_HIWORD_MASK		BIT(2)
@@ -401,6 +421,7 @@ struct clk_mux {
 extern const struct clk_ops clk_mux_ops;
 extern const struct clk_ops clk_mux_ro_ops;
 
+struct clk_hw *clk_register_mux_desc(struct device *dev, struct clk_desc *desc);
 struct clk *clk_register_mux(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
-- 
1.7.9.5

Re: [PATCHv11 04/49] clk: mux: add support for registering mux clock from descriptor

[Paul Walmsley]

On Thu, 19 Dec 2013, Tero Kristo wrote:

> New clk_register_desc() call can be used to register this clock type now.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 9fa279d..7dd6842 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -393,6 +393,26 @@ struct clk_mux {
>  	spinlock_t	*lock;
>  };
>  
> +/**
> + * struct clk_mux_desc - init descriptor for multiplexer clock
> + *
> + * @desc:	handle between common and hardware-specific interfaces

As mentioned in

http://patchwork.ozlabs.org/patch/294253/

please remove the blank line between the summary line and the arguments.
Documentation/kernel-doc-nano.txt says:

"The @argument descriptions must begin on the very next line following
this opening short function description line, with no intervening
empty comment lines."


- Paul

[PATCHv11 05/49] clk: gate: add support for registering gate clock from descriptor

[Tero Kristo]

New clk_register_desc() call can be used to register this clock type now.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/clk-gate.c       |   31 +++++++++++++++++++++++++++++++
 include/linux/clk-provider.h |   19 +++++++++++++++++++
 2 files changed, 50 insertions(+)

diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 4a58c55..3ec61d2 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -26,8 +26,12 @@
  * parent - fixed parent.  No clk_set_parent support
  */
 
+/* resolve struct clk_gate from inner struct clk_hw member */
 #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
 
+/* resolve struct clk_gate_desc from inner struct clk_desc member */
+#define to_hw_desc(_desc) container_of(_desc, struct clk_gate_desc, desc)
+
 /*
  * It works on following logic:
  *
@@ -162,3 +166,30 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 	return clk;
 }
 EXPORT_SYMBOL_GPL(clk_register_gate);
+
+struct clk_hw *clk_register_gate_desc(struct device *dev, struct clk_desc *desc)
+{
+	struct clk_gate *gate;
+	struct clk_gate_desc *hw_desc;
+
+	hw_desc = to_hw_desc(desc);
+
+	/* allocate mux clock */
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	/* populate struct clk_gate assignments */
+	gate->reg = hw_desc->reg;
+	gate->bit_idx = hw_desc->bit_idx;
+	gate->flags = hw_desc->flags;
+	gate->lock = hw_desc->lock;
+
+	if (!desc->ops)
+		desc->ops = &clk_gate_ops;
+
+	desc->flags |= CLK_IS_BASIC;
+
+	return &gate->hw;
+}
+EXPORT_SYMBOL_GPL(clk_register_gate_desc);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7dd6842..27a9765 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -269,10 +269,29 @@ struct clk_gate {
 	spinlock_t	*lock;
 };
 
+/**
+ * struct clk_gate_desc - init descriptor for gating clock
+ *
+ * @desc:	handle between common and hardware-specific interfaces
+ * @reg:	register controlling gate
+ * @bit_idx:	single bit controlling gate
+ * @flags:	hardware-specific flags
+ * @lock:	register lock
+ */
+struct clk_gate_desc {
+	struct clk_desc	desc;
+	void __iomem	*reg;
+	u8		bit_idx;
+	u8		flags;
+	spinlock_t	*lock;
+};
+
 #define CLK_GATE_SET_TO_DISABLE		BIT(0)
 #define CLK_GATE_HIWORD_MASK		BIT(1)
 
 extern const struct clk_ops clk_gate_ops;
+struct clk_hw *clk_register_gate_desc(struct device *dev,
+				      struct clk_desc *desc);
 struct clk *clk_register_gate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 bit_idx,
-- 
1.7.9.5

Re: [PATCHv11 05/49] clk: gate: add support for registering gate clock from descriptor

[Paul Walmsley]

On Thu, 19 Dec 2013, Tero Kristo wrote:

> New clk_register_desc() call can be used to register this clock type now.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 7dd6842..27a9765 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -269,10 +269,29 @@ struct clk_gate {
>  	spinlock_t	*lock;
>  };
>  
> +/**
> + * struct clk_gate_desc - init descriptor for gating clock
> + *
> + * @desc:	handle between common and hardware-specific interfaces

I like the kernel-doc-nano, but as mentioned in

http://patchwork.ozlabs.org/patch/294253/

please remove the blank line between the summary line and the arguments.
Documentation/kernel-doc-nano.txt says:

"The @argument descriptions must begin on the very next line following
this opening short function description line, with no intervening
empty comment lines."


- Paul

[PATCHv11 06/49] clk: add support for low level register ops

[Tero Kristo]

Low level register ops are needed for providing SoC or IP block specific
access routines to clock registers. Subsequent patches add support for
the low level ops for the individual clock drivers.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/clk.c            |   28 ++++++++++++++++++++++++++++
 include/linux/clk-provider.h |   13 +++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 29281f6..23a742b 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -34,6 +34,34 @@ static HLIST_HEAD(clk_root_list);
 static HLIST_HEAD(clk_orphan_list);
 static LIST_HEAD(clk_notifier_list);
 
+/**
+ * clk_readl_default - default clock register read support function
+ * @reg: register to read
+ *
+ * Default implementation for reading a clock register.
+ */
+static u32 clk_readl_default(u32 __iomem *reg)
+{
+	return readl(reg);
+}
+
+/**
+ * clk_writel_default - default clock register write support function
+ * @val: value to write
+ * @reg: register to write to
+ *
+ * Default implementation for writing a clock register.
+ */
+static void clk_writel_default(u32 val, u32 __iomem *reg)
+{
+	writel(val, reg);
+}
+
+struct clk_ll_ops clk_ll_ops_default = {
+	.clk_readl = clk_readl_default,
+	.clk_writel = clk_writel_default
+};
+
 /***           locking             ***/
 static void clk_prepare_lock(void)
 {
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 27a9765..cc5bee0 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -199,6 +199,24 @@ struct clk_hw {
 	const struct clk_init_data *init;
 };
 
+/**
+ * struct clk_ll_ops - low-level register access ops for a clock
+ *
+ * @clk_readl: pointer to register read function
+ * @clk_writel: pointer to register write function
+ *
+ * Low-level register access ops are generally used by the basic clock types
+ * (clk-gate, clk-mux, clk-divider etc.) to provide support for various
+ * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be
+ * used by other hardware-specific clock drivers if needed.
+ */
+struct clk_ll_ops {
+	u32	(*clk_readl)(u32 __iomem *reg);
+	void	(*clk_writel)(u32 val, u32 __iomem *reg);
+};
+
+extern struct clk_ll_ops clk_ll_ops_default;
+
 /*
  * DOC: Basic clock implementations common to many platforms
  *
-- 
1.7.9.5

Re: [PATCHv11 06/49] clk: add support for low level register ops

[Paul Walmsley]

On Thu, 19 Dec 2013, Tero Kristo wrote:

> Low level register ops are needed for providing SoC or IP block specific
> access routines to clock registers. Subsequent patches add support for
> the low level ops for the individual clock drivers.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

...

> ---
>  drivers/clk/clk.c            |   28 ++++++++++++++++++++++++++++
>  include/linux/clk-provider.h |   13 +++++++++++++
>  2 files changed, 41 insertions(+)
> 
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 29281f6..23a742b 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -34,6 +34,34 @@ static HLIST_HEAD(clk_root_list);
>  static HLIST_HEAD(clk_orphan_list);
>  static LIST_HEAD(clk_notifier_list);
>  
> +/**
> + * clk_readl_default - default clock register read support function
> + * @reg: register to read
> + *
> + * Default implementation for reading a clock register.
> + */
> +static u32 clk_readl_default(u32 __iomem *reg)

Why u32 __iomem rather than void *?  Not that this will affect OMAP, but 
will this need to be changed later to support 64-bit addresses?  
__raw_writel() and __raw_readl() are defined with "void __iomem *" as 
their address argument, which will be 64 bits on arm64, correct?

> +{
> +	return readl(reg);
> +}
> +
> +/**
> + * clk_writel_default - default clock register write support function
> + * @val: value to write
> + * @reg: register to write to
> + *
> + * Default implementation for writing a clock register.
> + */
> +static void clk_writel_default(u32 val, u32 __iomem *reg)

Same question as the above.

> +{
> +	writel(val, reg);
> +}
> +
> +struct clk_ll_ops clk_ll_ops_default = {
> +	.clk_readl = clk_readl_default,
> +	.clk_writel = clk_writel_default
> +};
> +
>  /***           locking             ***/
>  static void clk_prepare_lock(void)
>  {
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 27a9765..cc5bee0 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -199,6 +199,24 @@ struct clk_hw {
>  	const struct clk_init_data *init;
>  };
>  
> +/**
> + * struct clk_ll_ops - low-level register access ops for a clock
> + *
> + * @clk_readl: pointer to register read function

Please remove the blank line above as mentioned before.

> + * @clk_writel: pointer to register write function
> + *
> + * Low-level register access ops are generally used by the basic clock types
> + * (clk-gate, clk-mux, clk-divider etc.) to provide support for various
> + * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be
> + * used by other hardware-specific clock drivers if needed.
> + */
> +struct clk_ll_ops {
> +	u32	(*clk_readl)(u32 __iomem *reg);
> +	void	(*clk_writel)(u32 val, u32 __iomem *reg);
> +};
> +
> +extern struct clk_ll_ops clk_ll_ops_default;
> +
>  /*
>   * DOC: Basic clock implementations common to many platforms
>   *
> -- 
> 1.7.9.5
> 


- Paul

Re: [PATCHv11 06/49] clk: add support for low level register ops

[Tero Kristo]

On 12/20/2013 01:00 PM, Paul Walmsley wrote:
> On Thu, 19 Dec 2013, Tero Kristo wrote:
>
>> Low level register ops are needed for providing SoC or IP block specific
>> access routines to clock registers. Subsequent patches add support for
>> the low level ops for the individual clock drivers.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>
> ...
>
>> ---
>>   drivers/clk/clk.c            |   28 ++++++++++++++++++++++++++++
>>   include/linux/clk-provider.h |   13 +++++++++++++
>>   2 files changed, 41 insertions(+)
>>
>> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
>> index 29281f6..23a742b 100644
>> --- a/drivers/clk/clk.c
>> +++ b/drivers/clk/clk.c
>> @@ -34,6 +34,34 @@ static HLIST_HEAD(clk_root_list);
>>   static HLIST_HEAD(clk_orphan_list);
>>   static LIST_HEAD(clk_notifier_list);
>>
>> +/**
>> + * clk_readl_default - default clock register read support function
>> + * @reg: register to read
>> + *
>> + * Default implementation for reading a clock register.
>> + */
>> +static u32 clk_readl_default(u32 __iomem *reg)
>
> Why u32 __iomem rather than void *?  Not that this will affect OMAP, but
> will this need to be changed later to support 64-bit addresses?
> __raw_writel() and __raw_readl() are defined with "void __iomem *" as
> their address argument, which will be 64 bits on arm64, correct?

Just copy pasting the current implementation from the clk-provider.h file.

However, pointer is pointer no? This is just used to refer to a 32bit 
value, the pointer itself can be either 32bit or 64bit. If the registers 
are changed to be 64 bit though.... but that will require changing most 
of the clock code as it is littered with 'u32 val;' type declarations.

Anyway, I can change this to be void __iomem.

>
>> +{
>> +	return readl(reg);
>> +}
>> +
>> +/**
>> + * clk_writel_default - default clock register write support function
>> + * @val: value to write
>> + * @reg: register to write to
>> + *
>> + * Default implementation for writing a clock register.
>> + */
>> +static void clk_writel_default(u32 val, u32 __iomem *reg)
>
> Same question as the above.
>
>> +{
>> +	writel(val, reg);
>> +}
>> +
>> +struct clk_ll_ops clk_ll_ops_default = {
>> +	.clk_readl = clk_readl_default,
>> +	.clk_writel = clk_writel_default
>> +};
>> +
>>   /***           locking             ***/
>>   static void clk_prepare_lock(void)
>>   {
>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
>> index 27a9765..cc5bee0 100644
>> --- a/include/linux/clk-provider.h
>> +++ b/include/linux/clk-provider.h
>> @@ -199,6 +199,24 @@ struct clk_hw {
>>   	const struct clk_init_data *init;
>>   };
>>
>> +/**
>> + * struct clk_ll_ops - low-level register access ops for a clock
>> + *
>> + * @clk_readl: pointer to register read function
>
> Please remove the blank line above as mentioned before.

Yea I just copy pasted the comment sections....

>
>> + * @clk_writel: pointer to register write function
>> + *
>> + * Low-level register access ops are generally used by the basic clock types
>> + * (clk-gate, clk-mux, clk-divider etc.) to provide support for various
>> + * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be
>> + * used by other hardware-specific clock drivers if needed.
>> + */
>> +struct clk_ll_ops {
>> +	u32	(*clk_readl)(u32 __iomem *reg);
>> +	void	(*clk_writel)(u32 val, u32 __iomem *reg);
>> +};
>> +
>> +extern struct clk_ll_ops clk_ll_ops_default;
>> +
>>   /*
>>    * DOC: Basic clock implementations common to many platforms
>>    *
>> --
>> 1.7.9.5
>>
>
>
> - Paul
>

Re: [PATCHv11 06/49] clk: add support for low level register ops

[Paul Walmsley]

On Fri, 20 Dec 2013, Tero Kristo wrote:

> On 12/20/2013 01:00 PM, Paul Walmsley wrote:
> > On Thu, 19 Dec 2013, Tero Kristo wrote:
> > > +/**
> > > + * clk_readl_default - default clock register read support function
> > > + * @reg: register to read
> > > + *
> > > + * Default implementation for reading a clock register.
> > > + */
> > > +static u32 clk_readl_default(u32 __iomem *reg)
> > 
> > Why u32 __iomem rather than void *?  Not that this will affect OMAP, but
> > will this need to be changed later to support 64-bit addresses?
> > __raw_writel() and __raw_readl() are defined with "void __iomem *" as
> > their address argument, which will be 64 bits on arm64, correct?
> 
> Just copy pasting the current implementation from the clk-provider.h file.
> 
> However, pointer is pointer no? This is just used to refer to a 32bit value,
> the pointer itself can be either 32bit or 64bit. 

Yes I think you're right that the impact is simply cosmetic.  That
argument winds up as the address argument to __raw_readl/writel()
which is a void __iomem *, so the type there will be ignored.

> If the registers are changed to be 64 bit though.... but that will
> require changing most of the clock code as it is littered with 'u32
> val;' type declarations. 

Yes, we can count on readl/writel to operate on 32-bit values.

> Anyway, I can change this to be void __iomem.

OK

- Paul

[PATCHv11 07/49] clk: divider: add support for low level ops

[Tero Kristo]

Divider clock can now be registered to use low level register access ops.
Preferred initialization method is via clock description.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/clk-divider.c    |   11 ++++++++---
 include/linux/clk-provider.h |    4 ++++
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 8cfed5c..61ab30e 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -108,7 +108,7 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
 	struct clk_divider *divider = to_clk_divider(hw);
 	unsigned int div, val;
 
-	val = clk_readl(divider->reg) >> divider->shift;
+	val = divider->ll_ops->clk_readl(divider->reg) >> divider->shift;
 	val &= div_mask(divider);
 
 	div = _get_div(divider, val);
@@ -234,11 +234,11 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (divider->flags & CLK_DIVIDER_HIWORD_MASK) {
 		val = div_mask(divider) << (divider->shift + 16);
 	} else {
-		val = clk_readl(divider->reg);
+		val = divider->ll_ops->clk_readl(divider->reg);
 		val &= ~(div_mask(divider) << divider->shift);
 	}
 	val |= value << divider->shift;
-	clk_writel(val, divider->reg);
+	divider->ll_ops->clk_writel(val, divider->reg);
 
 	if (divider->lock)
 		spin_unlock_irqrestore(divider->lock, flags);
@@ -291,6 +291,7 @@ static struct clk *_register_divider(struct device *dev, const char *name,
 	div->lock = lock;
 	div->hw.init = &init;
 	div->table = table;
+	div->ll_ops = &clk_ll_ops_default;
 
 	/* register the clock */
 	clk = clk_register(dev, &div->hw);
@@ -368,6 +369,10 @@ struct clk_hw *clk_register_divider_desc(struct device *dev,
 	divider->flags = hw_desc->flags;
 	divider->table = hw_desc->table;
 	divider->lock = hw_desc->lock;
+	divider->ll_ops = hw_desc->ll_ops;
+
+	if (!divider->ll_ops)
+		divider->ll_ops = &clk_ll_ops_default;
 
 	if (!desc->ops)
 		desc->ops = &clk_divider_ops;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index cc5bee0..3a88346 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -320,6 +320,7 @@ struct clk_div_table {
  *
  * @hw:		handle between common and hardware-specific interfaces
  * @reg:	register containing the divider
+ * @ll_ops:	low-level ops for accessing the register
  * @shift:	shift to the divider bit field
  * @width:	width of the divider bit field
  * @table:	array of value/divider pairs, last entry should have div = 0
@@ -348,6 +349,7 @@ struct clk_div_table {
 struct clk_divider {
 	struct clk_hw	hw;
 	void __iomem	*reg;
+	struct clk_ll_ops	*ll_ops;
 	u8		shift;
 	u8		width;
 	u8		flags;
@@ -360,6 +362,7 @@ struct clk_divider {
  *
  * @desc:	handle between common and hardware-specific interfaces
  * @reg:	register containing the divider
+ * @ll_ops:	low-level ops for accessing the register
  * @shift:	shift to the divider bit field
  * @width:	width of the divider bit field
  * @table:	array of value/divider pairs, last entry should have div = 0
@@ -368,6 +371,7 @@ struct clk_divider {
 struct clk_divider_desc {
 	struct clk_desc	desc;
 	void __iomem	*reg;
+	struct clk_ll_ops	*ll_ops;
 	u8		shift;
 	u8		width;
 	u8		flags;
-- 
1.7.9.5

Re: [PATCHv11 07/49] clk: divider: add support for low level ops

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [131219 03:26]:
> Divider clock can now be registered to use low level register access ops.
> Preferred initialization method is via clock description.

This seems to make omap2 not boot for me. No output whatsoever even with
DEBUG_LL and earlyprintk.

Regards,

Tony

Re: [PATCHv11 07/49] clk: divider: add support for low level ops

[Tero Kristo]

On 12/19/2013 08:26 PM, Tony Lindgren wrote:
> * Tero Kristo <t-kristo@ti.com> [131219 03:26]:
>> Divider clock can now be registered to use low level register access ops.
>> Preferred initialization method is via clock description.
>
> This seems to make omap2 not boot for me. No output whatsoever even with
> DEBUG_LL and earlyprintk.

Thats weird... I was kind of afraid something like this might happen 
though as these patches touch the clock low level routines globally, but 
I can't see what could be broken...

-Tero

Re: [PATCHv11 07/49] clk: divider: add support for low level ops

[Rajendra Nayak]

On Friday 20 December 2013 12:32 AM, Tero Kristo wrote:
> On 12/19/2013 08:26 PM, Tony Lindgren wrote:
>> * Tero Kristo <t-kristo@ti.com> [131219 03:26]:
>>> Divider clock can now be registered to use low level register access ops.
>>> Preferred initialization method is via clock description.
>>
>> This seems to make omap2 not boot for me. No output whatsoever even with
>> DEBUG_LL and earlyprintk.
> 
> Thats weird... I was kind of afraid something like this might happen though as these patches touch the clock low level routines globally, but I can't see what could be broken...

I got hold of a 2430sdp and saw the same behavior, however DEBUG_LL and earlyprintk worked and this is
what I see

[    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[    0.000000] pgd = c0004000
[    0.000000] [00000000] *pgd=00000000
[    0.000000] Internal error: Oops: 5 [#1] SMP ARM
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-rc4-00056-ga9fa93e #2
[    0.000000] task: c07dfcb8 ti: c07d4000 task.ti: c07d4000
[    0.000000] PC is at clk_mux_get_parent+0x14/0xcc
[    0.000000] LR is at clk_mux_get_parent+0x10/0xcc
[    0.000000] pc : [<c044a234>]    lr : [<c044a230>]    psr: a00001d3
[    0.000000] sp : c07d5f40  ip : 00000000  fp : 00000000
[    0.000000] r10: c07dc880  r9 : 4107b366  r8 : c07f46a4
[    0.000000] r7 : c0edfa80  r6 : ffffffff  r5 : c07f6810  r4 : 00000002
[    0.000000] r3 : 00000000  r2 : 00000000  r1 : c069da67  r0 : 00000002
[    0.000000] Flags: NzCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[    0.000000] Control: 00c5387d  Table: 80004000  DAC: 00000017
[    0.000000] Process swapper/0 (pid: 0, stack limit = 0xc07d4248)
[    0.000000] Stack: (0xc07d5f40 to 0xc07d6000)
[    0.000000] 5f40: c044a220 00000002 c6001f40 c0448e54 c07dfcb8 c0862f7c c07f3600 c07f4368
[    0.000000] 5f60: ffffffff c0edfa80 c07b6b80 4107b366 c07dc880 c077edf4 c0531008 c07f4380
[    0.000000] 5f80: c07f34d4 c077f20c c0878964 c0edfa80 c07b6b80 c0877ac4 c0877640 ffffffff
[    0.000000] 5fa0: c0edfa80 c0777268 00000001 c07792ac c07b5250 c077221c 00000002 c076e974
[    0.000000] 5fc0: ffffffff ffffffff c076e57c 00000000 00000000 c07b6b80 00000000 00c5387d
[    0.000000] 5fe0: c07dc928 c07b6b7c c07e1474 80004008 8052c544 80008074 00000000 00000000
[    0.000000] [<c044a234>] (clk_mux_get_parent+0x14/0xcc) from [<c0448e54>] (__clk_init+0xe4/0x3f0)
[    0.000000] [<c0448e54>] (__clk_init+0xe4/0x3f0) from [<c077edf4>] (omap_clocks_register+0x24/0x48)
[    0.000000] [<c077edf4>] (omap_clocks_register+0x24/0x48) from [<c077f20c>] (omap2430_clk_init+0x4c/0x124)
[    0.000000] [<c077f20c>] (omap2430_clk_init+0x4c/0x124) from [<c0777268>] (omap_clk_init+0x28/0x30)
[    0.000000] [<c0777268>] (omap_clk_init+0x28/0x30) from [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58)
[    0.000000] [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) from [<c077221c>] (time_init+0x1c/0x30)
[    0.000000] [<c077221c>] (time_init+0x1c/0x30) from [<c076e974>] (start_kernel+0x1d4/0x360)
[    0.000000] [<c076e974>] (start_kernel+0x1d4/0x360) from [<80008074>] (0x80008074)
[    0.000000] Code: e1a05000 e5900000 ebfff7f5 e595300c (e5933000) 
[    0.000000] ---[ end trace 3406ff24bd97382e ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!

I'll try and debug further but any quick thoughts on what could be wrong?

> 
> -Tero
> 

Re: [PATCHv11 07/49] clk: divider: add support for low level ops

[Tero Kristo]

On 12/20/2013 12:07 PM, Rajendra Nayak wrote:
> On Friday 20 December 2013 12:32 AM, Tero Kristo wrote:
>> On 12/19/2013 08:26 PM, Tony Lindgren wrote:
>>> * Tero Kristo <t-kristo@ti.com> [131219 03:26]:
>>>> Divider clock can now be registered to use low level register access ops.
>>>> Preferred initialization method is via clock description.
>>>
>>> This seems to make omap2 not boot for me. No output whatsoever even with
>>> DEBUG_LL and earlyprintk.
>>
>> Thats weird... I was kind of afraid something like this might happen though as these patches touch the clock low level routines globally, but I can't see what could be broken...
>
> I got hold of a 2430sdp and saw the same behavior, however DEBUG_LL and earlyprintk worked and this is
> what I see
>
> [    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000
> [    0.000000] pgd = c0004000
> [    0.000000] [00000000] *pgd=00000000
> [    0.000000] Internal error: Oops: 5 [#1] SMP ARM
> [    0.000000] Modules linked in:
> [    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-rc4-00056-ga9fa93e #2
> [    0.000000] task: c07dfcb8 ti: c07d4000 task.ti: c07d4000
> [    0.000000] PC is at clk_mux_get_parent+0x14/0xcc
> [    0.000000] LR is at clk_mux_get_parent+0x10/0xcc
> [    0.000000] pc : [<c044a234>]    lr : [<c044a230>]    psr: a00001d3
> [    0.000000] sp : c07d5f40  ip : 00000000  fp : 00000000
> [    0.000000] r10: c07dc880  r9 : 4107b366  r8 : c07f46a4
> [    0.000000] r7 : c0edfa80  r6 : ffffffff  r5 : c07f6810  r4 : 00000002
> [    0.000000] r3 : 00000000  r2 : 00000000  r1 : c069da67  r0 : 00000002
> [    0.000000] Flags: NzCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
> [    0.000000] Control: 00c5387d  Table: 80004000  DAC: 00000017
> [    0.000000] Process swapper/0 (pid: 0, stack limit = 0xc07d4248)
> [    0.000000] Stack: (0xc07d5f40 to 0xc07d6000)
> [    0.000000] 5f40: c044a220 00000002 c6001f40 c0448e54 c07dfcb8 c0862f7c c07f3600 c07f4368
> [    0.000000] 5f60: ffffffff c0edfa80 c07b6b80 4107b366 c07dc880 c077edf4 c0531008 c07f4380
> [    0.000000] 5f80: c07f34d4 c077f20c c0878964 c0edfa80 c07b6b80 c0877ac4 c0877640 ffffffff
> [    0.000000] 5fa0: c0edfa80 c0777268 00000001 c07792ac c07b5250 c077221c 00000002 c076e974
> [    0.000000] 5fc0: ffffffff ffffffff c076e57c 00000000 00000000 c07b6b80 00000000 00c5387d
> [    0.000000] 5fe0: c07dc928 c07b6b7c c07e1474 80004008 8052c544 80008074 00000000 00000000
> [    0.000000] [<c044a234>] (clk_mux_get_parent+0x14/0xcc) from [<c0448e54>] (__clk_init+0xe4/0x3f0)
> [    0.000000] [<c0448e54>] (__clk_init+0xe4/0x3f0) from [<c077edf4>] (omap_clocks_register+0x24/0x48)
> [    0.000000] [<c077edf4>] (omap_clocks_register+0x24/0x48) from [<c077f20c>] (omap2430_clk_init+0x4c/0x124)
> [    0.000000] [<c077f20c>] (omap2430_clk_init+0x4c/0x124) from [<c0777268>] (omap_clk_init+0x28/0x30)
> [    0.000000] [<c0777268>] (omap_clk_init+0x28/0x30) from [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58)
> [    0.000000] [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) from [<c077221c>] (time_init+0x1c/0x30)
> [    0.000000] [<c077221c>] (time_init+0x1c/0x30) from [<c076e974>] (start_kernel+0x1d4/0x360)
> [    0.000000] [<c076e974>] (start_kernel+0x1d4/0x360) from [<80008074>] (0x80008074)
> [    0.000000] Code: e1a05000 e5900000 ebfff7f5 e595300c (e5933000)
> [    0.000000] ---[ end trace 3406ff24bd97382e ]---
> [    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
>
> I'll try and debug further but any quick thoughts on what could be wrong?

I have a fix for this already and will be posting v12 today. I will just 
re-post the drivers/clk part of the series though, rest of the patches 
should be fine.

This bug was silly actually, I didn't think of the static clock data 
initialization through the macros from clk-private.h... This caused the 
resulting clock structures to have NULL for clk_ll_ops as it bypassed 
the init function where I set it up. So, I will need to check against 
NULL every time I do anything with ll_ops.

-Tero

Re: [PATCHv11 07/49] clk: divider: add support for low level ops

[Rajendra Nayak]

On Friday 20 December 2013 03:59 PM, Tero Kristo wrote:
> On 12/20/2013 12:07 PM, Rajendra Nayak wrote:
>> On Friday 20 December 2013 12:32 AM, Tero Kristo wrote:
>>> On 12/19/2013 08:26 PM, Tony Lindgren wrote:
>>>> * Tero Kristo <t-kristo@ti.com> [131219 03:26]:
>>>>> Divider clock can now be registered to use low level register access ops.
>>>>> Preferred initialization method is via clock description.
>>>>
>>>> This seems to make omap2 not boot for me. No output whatsoever even with
>>>> DEBUG_LL and earlyprintk.
>>>
>>> Thats weird... I was kind of afraid something like this might happen though as these patches touch the clock low level routines globally, but I can't see what could be broken...
>>
>> I got hold of a 2430sdp and saw the same behavior, however DEBUG_LL and earlyprintk worked and this is
>> what I see
>>
>> [    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000
>> [    0.000000] pgd = c0004000
>> [    0.000000] [00000000] *pgd=00000000
>> [    0.000000] Internal error: Oops: 5 [#1] SMP ARM
>> [    0.000000] Modules linked in:
>> [    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-rc4-00056-ga9fa93e #2
>> [    0.000000] task: c07dfcb8 ti: c07d4000 task.ti: c07d4000
>> [    0.000000] PC is at clk_mux_get_parent+0x14/0xcc
>> [    0.000000] LR is at clk_mux_get_parent+0x10/0xcc
>> [    0.000000] pc : [<c044a234>]    lr : [<c044a230>]    psr: a00001d3
>> [    0.000000] sp : c07d5f40  ip : 00000000  fp : 00000000
>> [    0.000000] r10: c07dc880  r9 : 4107b366  r8 : c07f46a4
>> [    0.000000] r7 : c0edfa80  r6 : ffffffff  r5 : c07f6810  r4 : 00000002
>> [    0.000000] r3 : 00000000  r2 : 00000000  r1 : c069da67  r0 : 00000002
>> [    0.000000] Flags: NzCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
>> [    0.000000] Control: 00c5387d  Table: 80004000  DAC: 00000017
>> [    0.000000] Process swapper/0 (pid: 0, stack limit = 0xc07d4248)
>> [    0.000000] Stack: (0xc07d5f40 to 0xc07d6000)
>> [    0.000000] 5f40: c044a220 00000002 c6001f40 c0448e54 c07dfcb8 c0862f7c c07f3600 c07f4368
>> [    0.000000] 5f60: ffffffff c0edfa80 c07b6b80 4107b366 c07dc880 c077edf4 c0531008 c07f4380
>> [    0.000000] 5f80: c07f34d4 c077f20c c0878964 c0edfa80 c07b6b80 c0877ac4 c0877640 ffffffff
>> [    0.000000] 5fa0: c0edfa80 c0777268 00000001 c07792ac c07b5250 c077221c 00000002 c076e974
>> [    0.000000] 5fc0: ffffffff ffffffff c076e57c 00000000 00000000 c07b6b80 00000000 00c5387d
>> [    0.000000] 5fe0: c07dc928 c07b6b7c c07e1474 80004008 8052c544 80008074 00000000 00000000
>> [    0.000000] [<c044a234>] (clk_mux_get_parent+0x14/0xcc) from [<c0448e54>] (__clk_init+0xe4/0x3f0)
>> [    0.000000] [<c0448e54>] (__clk_init+0xe4/0x3f0) from [<c077edf4>] (omap_clocks_register+0x24/0x48)
>> [    0.000000] [<c077edf4>] (omap_clocks_register+0x24/0x48) from [<c077f20c>] (omap2430_clk_init+0x4c/0x124)
>> [    0.000000] [<c077f20c>] (omap2430_clk_init+0x4c/0x124) from [<c0777268>] (omap_clk_init+0x28/0x30)
>> [    0.000000] [<c0777268>] (omap_clk_init+0x28/0x30) from [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58)
>> [    0.000000] [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) from [<c077221c>] (time_init+0x1c/0x30)
>> [    0.000000] [<c077221c>] (time_init+0x1c/0x30) from [<c076e974>] (start_kernel+0x1d4/0x360)
>> [    0.000000] [<c076e974>] (start_kernel+0x1d4/0x360) from [<80008074>] (0x80008074)
>> [    0.000000] Code: e1a05000 e5900000 ebfff7f5 e595300c (e5933000)
>> [    0.000000] ---[ end trace 3406ff24bd97382e ]---
>> [    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
>>
>> I'll try and debug further but any quick thoughts on what could be wrong?
> 
> I have a fix for this already and will be posting v12 today. I will just re-post the drivers/clk part of the series though, rest of the patches should be fine.
> 
> This bug was silly actually, I didn't think of the static clock data initialization through the macros from clk-private.h... This caused the resulting clock structures to have NULL for clk_ll_ops as it bypassed the init function where I set it up. So, I will need to check against NULL every time I do anything with ll_ops.

yeah, the crash was indeed when ll_ops was dereferenced despite being NULL.

> 
> -Tero
> 

Re: [PATCHv11 07/49] clk: divider: add support for low level ops

[Tony Lindgren]

* Rajendra Nayak <rnayak@ti.com> [131220 02:40]:
> 
> yeah, the crash was indeed when ll_ops was dereferenced despite being NULL.

Might be also worth checking if the gate and mux patches have a similar issue.

Regards,

Tony

Re: [PATCHv11 07/49] clk: divider: add support for low level ops

[Tero Kristo]

On 12/20/2013 06:16 PM, Tony Lindgren wrote:
> * Rajendra Nayak <rnayak@ti.com> [131220 02:40]:
>>
>> yeah, the crash was indeed when ll_ops was dereferenced despite being NULL.
>
> Might be also worth checking if the gate and mux patches have a similar issue.

Yea they had and I fixed those. v12 coming out right after this email.

-Tero

[PATCHv11 08/49] clk: gate: add support for low level ops

[Tero Kristo]

Gate clock can now be registered to use low level register access ops.
Preferred initialization method is via clock description.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/clk-gate.c       |   11 ++++++++---
 include/linux/clk-provider.h |    4 ++++
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 3ec61d2..18731b4 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -62,7 +62,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
 		if (set)
 			reg |= BIT(gate->bit_idx);
 	} else {
-		reg = clk_readl(gate->reg);
+		reg = gate->ll_ops->clk_readl(gate->reg);
 
 		if (set)
 			reg |= BIT(gate->bit_idx);
@@ -70,7 +70,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
 			reg &= ~BIT(gate->bit_idx);
 	}
 
-	clk_writel(reg, gate->reg);
+	gate->ll_ops->clk_writel(reg, gate->reg);
 
 	if (gate->lock)
 		spin_unlock_irqrestore(gate->lock, flags);
@@ -93,7 +93,7 @@ static int clk_gate_is_enabled(struct clk_hw *hw)
 	u32 reg;
 	struct clk_gate *gate = to_clk_gate(hw);
 
-	reg = clk_readl(gate->reg);
+	reg = gate->ll_ops->clk_readl(gate->reg);
 
 	/* if a set bit disables this clk, flip it before masking */
 	if (gate->flags & CLK_GATE_SET_TO_DISABLE)
@@ -157,6 +157,7 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 	gate->flags = clk_gate_flags;
 	gate->lock = lock;
 	gate->hw.init = &init;
+	gate->ll_ops = &clk_ll_ops_default;
 
 	clk = clk_register(dev, &gate->hw);
 
@@ -184,6 +185,10 @@ struct clk_hw *clk_register_gate_desc(struct device *dev, struct clk_desc *desc)
 	gate->bit_idx = hw_desc->bit_idx;
 	gate->flags = hw_desc->flags;
 	gate->lock = hw_desc->lock;
+	gate->ll_ops = hw_desc->ll_ops;
+
+	if (!gate->ll_ops)
+		gate->ll_ops = &clk_ll_ops_default;
 
 	if (!desc->ops)
 		desc->ops = &clk_gate_ops;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 3a88346..0bbf231 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -259,6 +259,7 @@ void of_fixed_clk_setup(struct device_node *np);
  *
  * @hw:		handle between common and hardware-specific interfaces
  * @reg:	register controlling gate
+ * @ll_ops:	low-level ops for accessing the register
  * @bit_idx:	single bit controlling gate
  * @flags:	hardware-specific flags
  * @lock:	register lock
@@ -277,6 +278,7 @@ void of_fixed_clk_setup(struct device_node *np);
 struct clk_gate {
 	struct clk_hw hw;
 	void __iomem	*reg;
+	struct clk_ll_ops	*ll_ops;
 	u8		bit_idx;
 	u8		flags;
 	spinlock_t	*lock;
@@ -287,6 +289,7 @@ struct clk_gate {
  *
  * @desc:	handle between common and hardware-specific interfaces
  * @reg:	register controlling gate
+ * @ll_ops:	low-level ops for accessing the register
  * @bit_idx:	single bit controlling gate
  * @flags:	hardware-specific flags
  * @lock:	register lock
@@ -294,6 +297,7 @@ struct clk_gate {
 struct clk_gate_desc {
 	struct clk_desc	desc;
 	void __iomem	*reg;
+	struct clk_ll_ops	*ll_ops;
 	u8		bit_idx;
 	u8		flags;
 	spinlock_t	*lock;
-- 
1.7.9.5

[PATCHv11 09/49] clk: mux: add support for low level ops

[Tero Kristo]

Multiplexer clock can now be registered to use low level register access ops.
Preferred initialization method is via clock description.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/clk-mux.c        |   11 ++++++++---
 include/linux/clk-provider.h |    4 ++++
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 2cbed08..1a603f3 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -46,7 +46,7 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
 	 * val = 0x4 really means "bit 2, index starts at bit 0"
 	 */
-	val = clk_readl(mux->reg) >> mux->shift;
+	val = mux->ll_ops->clk_readl(mux->reg) >> mux->shift;
 	val &= mux->mask;
 
 	if (mux->table) {
@@ -93,11 +93,11 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 	if (mux->flags & CLK_MUX_HIWORD_MASK) {
 		val = mux->mask << (mux->shift + 16);
 	} else {
-		val = clk_readl(mux->reg);
+		val = mux->ll_ops->clk_readl(mux->reg);
 		val &= ~(mux->mask << mux->shift);
 	}
 	val |= index << mux->shift;
-	clk_writel(val, mux->reg);
+	mux->ll_ops->clk_writel(val, mux->reg);
 
 	if (mux->lock)
 		spin_unlock_irqrestore(mux->lock, flags);
@@ -159,6 +159,7 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name,
 	mux->lock = lock;
 	mux->table = table;
 	mux->hw.init = &init;
+	mux->ll_ops = &clk_ll_ops_default;
 
 	clk = clk_register(dev, &mux->hw);
 
@@ -201,6 +202,10 @@ struct clk_hw *clk_register_mux_desc(struct device *dev, struct clk_desc *desc)
 	mux->shift = hw_desc->shift;
 	mux->flags = hw_desc->flags;
 	mux->lock = hw_desc->lock;
+	mux->ll_ops = hw_desc->ll_ops;
+
+	if (!mux->ll_ops)
+		mux->ll_ops = &clk_ll_ops_default;
 
 	if (!desc->ops) {
 		if (mux->flags & CLK_MUX_READ_ONLY)
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 0bbf231..8b46a7b 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -407,6 +407,7 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
  *
  * @hw:		handle between common and hardware-specific interfaces
  * @reg:	register controlling multiplexer
+ * @ll_ops:	low-level ops for accessing the register
  * @shift:	shift to multiplexer bit field
  * @width:	width of mutliplexer bit field
  * @flags:	hardware-specific flags
@@ -426,6 +427,7 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
 struct clk_mux {
 	struct clk_hw	hw;
 	void __iomem	*reg;
+	struct clk_ll_ops	*ll_ops;
 	u32		*table;
 	u32		mask;
 	u8		shift;
@@ -438,6 +440,7 @@ struct clk_mux {
  *
  * @desc:	handle between common and hardware-specific interfaces
  * @reg:	register controlling multiplexer
+ * @ll_ops:	low-level ops for accesing the register
  * @shift:	shift to multiplexer bit field
  * @width:	width of multiplexer bit field
  * @flags:	hardware-specific flags
@@ -446,6 +449,7 @@ struct clk_mux {
 struct clk_mux_desc {
 	struct clk_desc	desc;
 	void __iomem	*reg;
+	struct clk_ll_ops	*ll_ops;
 	u32		*table;
 	u32		mask;
 	u8		shift;
-- 
1.7.9.5

[PATCHv11 10/49] CLK: TI: add DT alias clock registration mechanism

[Tero Kristo]

Some devices require their clocks to be available with a specific
dev-id con-id mapping. With DT, the clocks can be found by default
only with their name, or alternatively through the device node of
the consumer. With drivers, that don't support DT fully yet, add
mechanism to register specific clock names.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/Makefile    |    1 +
 drivers/clk/ti/Makefile |    3 +++
 drivers/clk/ti/clk.c    |   55 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h  |   42 ++++++++++++++++++++++++++++++++++++
 4 files changed, 101 insertions(+)
 create mode 100644 drivers/clk/ti/Makefile
 create mode 100644 drivers/clk/ti/clk.c
 create mode 100644 include/linux/clk/ti.h

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 7a10bc9..c61f768 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_PLAT_SAMSUNG)	+= samsung/
 obj-$(CONFIG_COMMON_CLK_XGENE)  += clk-xgene.o
 obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= keystone/
+obj-$(CONFIG_ARCH_OMAP)		+= ti/
 
 obj-$(CONFIG_X86)		+= x86/
 
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
new file mode 100644
index 0000000..1825f7f
--- /dev/null
+++ b/drivers/clk/ti/Makefile
@@ -0,0 +1,3 @@
+ifneq ($(CONFIG_OF),)
+obj-y					+= clk.o
+endif
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
new file mode 100644
index 0000000..ef1a7cd
--- /dev/null
+++ b/drivers/clk/ti/clk.c
@@ -0,0 +1,55 @@
+/*
+ * TI clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+#include <linux/of.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+/**
+ * ti_dt_clocks_register - register DT alias clocks during boot
+ * @oclks: list of clocks to register
+ *
+ * Register alias or non-standard DT clock entries during boot. By
+ * default, DT clocks are found based on their node name. If any
+ * additional con-id / dev-id -> clock mapping is required, use this
+ * function to list these.
+ */
+void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
+{
+	struct ti_dt_clk *c;
+	struct device_node *node;
+	struct clk *clk;
+	struct of_phandle_args clkspec;
+
+	for (c = oclks; c->node_name != NULL; c++) {
+		node = of_find_node_by_name(NULL, c->node_name);
+		clkspec.np = node;
+		clk = of_clk_get_from_provider(&clkspec);
+
+		if (!IS_ERR(clk)) {
+			c->lk.clk = clk;
+			clkdev_add(&c->lk);
+		} else {
+			pr_warn("failed to lookup clock node %s\n",
+				c->node_name);
+		}
+	}
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
new file mode 100644
index 0000000..df94c24
--- /dev/null
+++ b/include/linux/clk/ti.h
@@ -0,0 +1,42 @@
+/*
+ * TI clock drivers support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __LINUX_CLK_TI_H__
+#define __LINUX_CLK_TI_H__
+
+#include <linux/clkdev.h>
+
+/**
+ * struct ti_dt_clk - OMAP DT clock alias declarations
+ * @lk: clock lookup definition
+ * @node_name: clock DT node to map to
+ */
+struct ti_dt_clk {
+	struct clk_lookup		lk;
+	char				*node_name;
+};
+
+#define DT_CLK(dev, con, name)		\
+	{				\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+		},			\
+		.node_name = name,	\
+	}
+
+
+void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+
+#endif
-- 
1.7.9.5

[PATCHv11 11/49] CLK: ti: add init support for clock IP blocks

[Tero Kristo]

ti_dt_clk_init_provider() can now be used to initialize the contents of
a single clock IP block. This parses all the clocks under the IP block
and calls the corresponding init function for them.

This patch also introduces a helper function for the TI clock drivers
to get register info from DT and append the master IP info to this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/clk/ti/clk.c   |  108 ++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h |   20 +++++++++
 2 files changed, 128 insertions(+)

diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index ef1a7cd..32a65d0 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -19,10 +19,16 @@
 #include <linux/clkdev.h>
 #include <linux/clk/ti.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/list.h>
 
 #undef pr_fmt
 #define pr_fmt(fmt) "%s: " fmt, __func__
 
+extern struct of_device_id __clk_of_table[];
+static int ti_dt_clk_memmap_index;
+struct clk_ll_ops *ti_clk_ll_ops;
+
 /**
  * ti_dt_clocks_register - register DT alias clocks during boot
  * @oclks: list of clocks to register
@@ -53,3 +59,105 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
 		}
 	}
 }
+
+struct clk_init_item {
+	struct device_node *node;
+	struct clk_hw *hw;
+	ti_of_clk_init_cb_t func;
+	struct list_head link;
+};
+
+static LIST_HEAD(retry_list);
+
+/**
+ * ti_clk_retry_init - retries a failed clock init at later phase
+ * @node: device not for the clock
+ * @hw: partially initialized clk_hw struct for the clock
+ * @func: init function to be called for the clock
+ *
+ * Adds a failed clock init to the retry list. The retry list is parsed
+ * once all the other clocks have been initialized.
+ */
+void __init ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
+			      ti_of_clk_init_cb_t func)
+{
+	struct clk_init_item *retry;
+
+	pr_debug("%s: adding to retry list...\n", node->name);
+	retry = kzalloc(sizeof(*retry), GFP_KERNEL);
+	retry->node = node;
+	retry->func = func;
+	retry->hw = hw;
+	list_add(&retry->link, &retry_list);
+}
+
+/**
+ * ti_clk_get_reg_addr - get register address for a clock register
+ * @node: device node for the clock
+ * @index: register index from the clock node
+ *
+ * Builds clock register address from device tree information. This
+ * is a struct of type clk_omap_reg.
+ */
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
+{
+	struct clk_omap_reg *reg;
+	u32 val;
+	u32 tmp;
+
+	reg = (struct clk_omap_reg *)&tmp;
+	reg->index = ti_dt_clk_memmap_index;
+
+	if (of_property_read_u32_index(node, "reg", index, &val)) {
+		pr_err("%s must have reg[%d]!\n", node->name, index);
+		return NULL;
+	}
+
+	reg->offset = val;
+
+	return (void __iomem *)tmp;
+}
+
+/**
+ * ti_dt_clk_init_provider - init master clock provider
+ * @parent: master node
+ * @index: internal index for clk_reg_ops
+ *
+ * Initializes a master clock IP block and its child clock nodes.
+ * Regmap is provided for accessing the register space for the
+ * IP block and all the clocks under it.
+ */
+void ti_dt_clk_init_provider(struct device_node *parent, int index)
+{
+	const struct of_device_id *match;
+	struct device_node *np;
+	struct device_node *clocks;
+	of_clk_init_cb_t clk_init_cb;
+	struct clk_init_item *retry;
+	struct clk_init_item *tmp;
+
+	ti_dt_clk_memmap_index = index;
+
+	/* get clocks for this parent */
+	clocks = of_get_child_by_name(parent, "clocks");
+	if (!clocks) {
+		pr_err("%s missing 'clocks' child node.\n", parent->name);
+		return;
+	}
+
+	for_each_child_of_node(clocks, np) {
+		match = of_match_node(__clk_of_table, np);
+		if (!match)
+			continue;
+		clk_init_cb = (of_clk_init_cb_t)match->data;
+		pr_debug("%s: initializing: %s\n", __func__, np->name);
+		clk_init_cb(np);
+	}
+
+	list_for_each_entry_safe(retry, tmp, &retry_list, link) {
+		pr_debug("retry-init: %s\n", retry->node->name);
+		retry->func(retry->hw, retry->node);
+		list_del(&retry->link);
+		kfree(retry);
+	}
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index df94c24..6a2e497 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -36,7 +36,27 @@ struct ti_dt_clk {
 		.node_name = name,	\
 	}
 
+/* Maximum number of clock memmaps */
+#define CLK_MAX_MEMMAPS			4
 
+typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
+
+/**
+ * struct clk_omap_reg - OMAP register declaration
+ * @offset: offset from the master IP module base address
+ * @index: index of the master IP module
+ */
+struct clk_omap_reg {
+	u16 offset;
+	u16 index;
+};
+
+extern struct clk_ll_ops *ti_clk_ll_ops;
+
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+void ti_dt_clk_init_provider(struct device_node *np, int index);
+void ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
+		       ti_of_clk_init_cb_t func);
 
 #endif
-- 
1.7.9.5

[PATCHv11 12/49] CLK: TI: Add DPLL clock support

[Tero Kristo]

The OMAP clock driver now supports DPLL clock type. This patch also
adds support for DT DPLL nodes.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/dpll.txt          |   75 +++
 arch/arm/mach-omap2/clock.h                        |  164 +-----
 arch/arm/mach-omap2/clock3xxx.h                    |    2 -
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/dpll.c                              |  556 ++++++++++++++++++++
 include/linux/clk/ti.h                             |  172 ++++++
 6 files changed, 805 insertions(+), 166 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/dpll.txt
 create mode 100644 drivers/clk/ti/dpll.c

diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt
new file mode 100644
index 0000000..30bfdb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -0,0 +1,75 @@
+Binding for Texas Instruments DPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped DPLL with usually two selectable input clocks
+(reference clock and bypass clock), with digital phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) This binding has several
+sub-types, which effectively result in slightly different setup
+for the actual DPLL clock.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of:
+		"ti,omap3-dpll-clock",
+		"ti,omap3-dpll-core-clock",
+		"ti,omap3-dpll-per-clock",
+		"ti,omap3-dpll-per-j-type-clock",
+		"ti,omap4-dpll-clock",
+		"ti,omap4-dpll-x2-clock",
+		"ti,omap4-dpll-core-clock",
+		"ti,omap4-dpll-m4xen-clock",
+		"ti,omap4-dpll-j-type-clock",
+		"ti,am3-dpll-no-gate-clock",
+		"ti,am3-dpll-j-type-clock",
+		"ti,am3-dpll-no-gate-j-type-clock",
+		"ti,am3-dpll-clock",
+		"ti,am3-dpll-core-clock",
+		"ti,am3-dpll-x2-clock",
+
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks, first entry lists reference clock
+  and second entry bypass clock
+- reg : offsets for the register set for controlling the DPLL.
+  Registers are listed in following order:
+	"control" - contains the control register base address
+	"idlest" - contains the idle status register base address
+	"mult-div1" - contains the multiplier / divider register base address
+	"autoidle" - contains the autoidle register base address (optional)
+  ti,am3-* dpll types do not have autoidle register
+
+Optional properties:
+- DPLL mode setting - defining any one or more of the following overrides
+  default setting.
+	- ti,low-power-stop : DPLL supports low power stop mode, gating output
+	- ti,low-power-bypass : DPLL output matches rate of parent bypass clock
+	- ti,lock : DPLL locks in programmed rate
+
+Examples:
+	dpll_core_ck: dpll_core_ck@44e00490 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x490>, <0x45c>, <0x488>, <0x468>;
+	};
+
+	dpll2_ck: dpll2_ck@48004004 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll2_fck>;
+		ti,low-power-stop;
+		ti,low-power-bypass;
+		ti,lock;
+		reg = <0x4>, <0x24>, <0x34>, <0x40>;
+	};
+
+	dpll_core_ck: dpll_core_ck@44e00490 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x90>, <0x5c>, <0x68>;
+	};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 82916cc..b345f3e 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,6 +21,7 @@
 
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
 
 struct omap_clk {
 	u16				cpu;
@@ -37,7 +38,6 @@ struct omap_clk {
 	}
 
 struct clockdomain;
-#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
 
 #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)	\
 	static struct clk _name = {				\
@@ -178,141 +178,6 @@ struct clksel {
 	const struct clksel_rate *rates;
 };
 
-/**
- * struct dpll_data - DPLL registers and integration data
- * @mult_div1_reg: register containing the DPLL M and N bitfields
- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
- * @clk_bypass: struct clk pointer to the clock's bypass clock input
- * @clk_ref: struct clk pointer to the clock's reference clock input
- * @control_reg: register containing the DPLL mode bitfield
- * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
- * @last_rounded_m4xen: cache of the last M4X result of
- *			omap4_dpll_regm4xen_round_rate()
- * @last_rounded_lpmode: cache of the last lpmode result of
- *			 omap4_dpll_lpmode_recalc()
- * @max_multiplier: maximum valid non-bypass multiplier value (actual)
- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
- * @min_divider: minimum valid non-bypass divider value (actual)
- * @max_divider: maximum valid non-bypass divider value (actual)
- * @modes: possible values of @enable_mask
- * @autoidle_reg: register containing the DPLL autoidle mode bitfield
- * @idlest_reg: register containing the DPLL idle status bitfield
- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
- * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
- * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
- * @flags: DPLL type/features (see below)
- *
- * Possible values for @flags:
- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- *
- * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
- *
- * XXX Some DPLLs have multiple bypass inputs, so it's not technically
- * correct to only have one @clk_bypass pointer.
- *
- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
- * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a different structure, so that the runtime-fixed data
- * can be placed into read-only space.
- */
-struct dpll_data {
-	void __iomem		*mult_div1_reg;
-	u32			mult_mask;
-	u32			div1_mask;
-	struct clk		*clk_bypass;
-	struct clk		*clk_ref;
-	void __iomem		*control_reg;
-	u32			enable_mask;
-	unsigned long		last_rounded_rate;
-	u16			last_rounded_m;
-	u8			last_rounded_m4xen;
-	u8			last_rounded_lpmode;
-	u16			max_multiplier;
-	u8			last_rounded_n;
-	u8			min_divider;
-	u16			max_divider;
-	u8			modes;
-	void __iomem		*autoidle_reg;
-	void __iomem		*idlest_reg;
-	u32			autoidle_mask;
-	u32			freqsel_mask;
-	u32			idlest_mask;
-	u32			dco_mask;
-	u32			sddiv_mask;
-	u32			lpmode_mask;
-	u32			m4xen_mask;
-	u8			auto_recal_bit;
-	u8			recal_en_bit;
-	u8			recal_st_bit;
-	u8			flags;
-};
-
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- *     bits share the same register.  This flag allows the
- *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
- *     should be used.  This is a temporary solution - a better approach
- *     would be to associate clock type-specific data with the clock,
- *     similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL	(1 << 1)
-#define CLOCK_NO_IDLE_PARENT	(1 << 2)
-#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
-#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2		(1 << 5)
-
-/**
- * struct clk_hw_omap - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
- * @enable_reg: register to write to enable the clock (see @enable_bit)
- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @flags: see "struct clk.flags possibilities" above
- * @clksel_reg: for clksel clks, register va containing src/divisor select
- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
- * @clksel: for clksel clks, pointer to struct clksel for this clock
- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
- * @clkdm_name: clockdomain name that this clock is contained in
- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- */
-
-struct clk_hw_omap_ops;
-
-struct clk_hw_omap {
-	struct clk_hw		hw;
-	struct list_head	node;
-	unsigned long		fixed_rate;
-	u8			fixed_div;
-	void __iomem		*enable_reg;
-	u8			enable_bit;
-	u8			flags;
-	void __iomem		*clksel_reg;
-	u32			clksel_mask;
-	const struct clksel	*clksel;
-	struct dpll_data	*dpll_data;
-	const char		*clkdm_name;
-	struct clockdomain	*clkdm;
-	const struct clk_hw_omap_ops	*ops;
-};
-
 struct clk_hw_omap_ops {
 	void			(*find_idlest)(struct clk_hw_omap *oclk,
 					void __iomem **idlest_reg,
@@ -348,36 +213,13 @@ unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
 #define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP4XXX_EN_DPLL_LOCKED			0x7
 
-/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
-#define DPLL_LOW_POWER_STOP	0x1
-#define DPLL_LOW_POWER_BYPASS	0x5
-#define DPLL_LOCKED		0x7
-
-/* DPLL Type and DCO Selection Flags */
-#define DPLL_J_TYPE		0x1
-
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
-			unsigned long *parent_rate);
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
-int omap3_noncore_dpll_enable(struct clk_hw *hw);
-void omap3_noncore_dpll_disable(struct clk_hw *hw);
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate);
 u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
 void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
 void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
-				    unsigned long parent_rate);
 int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk);
 void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk);
 void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk);
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
-				unsigned long parent_rate);
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
-				    unsigned long target_rate,
-				    unsigned long *parent_rate);
 
-void omap2_init_clk_clkdm(struct clk_hw *clk);
 void __init omap2_clk_disable_clkdm_control(void);
 
 /* clkt_clksel.c public functions */
@@ -396,7 +238,6 @@ int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
 extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
 extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
 
-u8 omap2_init_dpll_parent(struct clk_hw *hw);
 unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
 
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -408,7 +249,6 @@ void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
 void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
 				void __iomem **idlest_reg,
 				u8 *idlest_bit, u8 *idlest_val);
-void omap2_init_clk_hw_omap_clocks(struct clk *clk);
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_disable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
@@ -433,10 +273,8 @@ extern const struct clksel_rate gfx_l3_rates[];
 extern const struct clksel_rate dsp_ick_rates[];
 extern struct clk dummy_ck;
 
-extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
 extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h
index 8cd4b0a..dab90e2 100644
--- a/arch/arm/mach-omap2/clock3xxx.h
+++ b/arch/arm/mach-omap2/clock3xxx.h
@@ -9,8 +9,6 @@
 #define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
 
 int omap3xxx_clk_init(void);
-int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
-					unsigned long parent_rate);
 int omap3_core_dpll_m2_set_rate(struct clk_hw *clk, unsigned long rate,
 					unsigned long parent_rate);
 void omap3_clk_lock_dpll5(void);
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 1825f7f..05af5d8 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,3 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o
+obj-y					+= clk.o dpll.o
 endif
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
new file mode 100644
index 0000000..b761220
--- /dev/null
+++ b/drivers/clk/ti/dpll.c
@@ -0,0 +1,556 @@
+/*
+ * OMAP DPLL clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#define DPLL_HAS_AUTOIDLE	0x1
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
+static const struct clk_ops dpll_m4xen_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.recalc_rate	= &omap4_dpll_regm4xen_recalc,
+	.round_rate	= &omap4_dpll_regm4xen_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.get_parent	= &omap2_init_dpll_parent,
+};
+#endif
+
+static const struct clk_ops dpll_core_ck_ops = {
+	.recalc_rate	= &omap3_dpll_recalc,
+	.get_parent	= &omap2_init_dpll_parent,
+};
+
+#ifdef CONFIG_ARCH_OMAP3
+static const struct clk_ops omap3_dpll_core_ck_ops = {
+	.get_parent	= &omap2_init_dpll_parent,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+};
+#endif
+
+static const struct clk_ops dpll_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.get_parent	= &omap2_init_dpll_parent,
+};
+
+static const struct clk_ops dpll_no_gate_ck_ops = {
+	.recalc_rate	= &omap3_dpll_recalc,
+	.get_parent	= &omap2_init_dpll_parent,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+};
+
+#ifdef CONFIG_ARCH_OMAP3
+static const struct clk_ops omap3_dpll_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.get_parent	= &omap2_init_dpll_parent,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.round_rate	= &omap2_dpll_round_rate,
+};
+
+static const struct clk_ops omap3_dpll_per_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.get_parent	= &omap2_init_dpll_parent,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.set_rate	= &omap3_dpll4_set_rate,
+	.round_rate	= &omap2_dpll_round_rate,
+};
+#endif
+
+static const struct clk_ops dpll_x2_ck_ops = {
+	.recalc_rate	= &omap3_clkoutx2_recalc,
+};
+
+/**
+ * ti_clk_register_dpll - low level registration of a DPLL clock
+ * @hw: hardware clock definition for the clock
+ * @node: device node for the clock
+ *
+ * Finalizes DPLL registration process. In case a failure (clk-ref or
+ * clk-bypass is missing), the clock is added to retry list and
+ * the initialization is retried on later stage.
+ */
+static void __init ti_clk_register_dpll(struct clk_hw *hw,
+					struct device_node *node)
+{
+	struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw);
+	struct dpll_data *dd = clk_hw->dpll_data;
+	struct clk *clk;
+
+	dd->clk_ref = of_clk_get(node, 0);
+	dd->clk_bypass = of_clk_get(node, 1);
+
+	if (IS_ERR(dd->clk_ref) || IS_ERR(dd->clk_bypass)) {
+		pr_debug("clk-ref or clk-bypass missing for %s, retry later\n",
+			 node->name);
+		ti_clk_retry_init(node, hw, ti_clk_register_dpll);
+		return;
+	}
+
+	/* register the clock */
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (IS_ERR(clk)) {
+		pr_err("failed clk_register for %s (%ld)\n", node->name,
+		       PTR_ERR(clk));
+		kfree(clk_hw->dpll_data);
+		kfree(clk_hw->hw.init->parent_names);
+		kfree(clk_hw->hw.init);
+		kfree(clk_hw);
+	} else {
+		omap2_init_clk_hw_omap_clocks(clk);
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		kfree(clk_hw->hw.init->parent_names);
+		kfree(clk_hw->hw.init);
+	}
+}
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX)
+/**
+ * ti_clk_register_dpll_x2 - Registers a DPLLx2 clock
+ * @node: device node for this clock
+ * @ops: clk_ops for this clock
+ * @hw_ops: clk_hw_ops for this clock
+ *
+ * Initializes a DPLL x 2 clock from device tree data.
+ */
+static void ti_clk_register_dpll_x2(struct device_node *node,
+				    const struct clk_ops *ops,
+				    const struct clk_hw_omap_ops *hw_ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+	const char *name = node->name;
+	const char *parent_name;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	if (!parent_name) {
+		pr_err("%s must have parent\n", node->name);
+		return;
+	}
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return;
+
+	clk_hw->ops = hw_ops;
+	clk_hw->hw.init = &init;
+
+	init.name = name;
+	init.ops = ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	/* register the clock */
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (IS_ERR(clk)) {
+		kfree(clk_hw);
+	} else {
+		omap2_init_clk_hw_omap_clocks(clk);
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	}
+}
+#endif
+
+/**
+ * of_ti_dpll_setup - Setup function for OMAP DPLL clocks
+ * @node: device node containing the DPLL info
+ * @ops: ops for the DPLL
+ * @ddt: DPLL data template to use
+ * @init_flags: flags for controlling init types
+ *
+ * Initializes a DPLL clock from device tree data.
+ */
+static void __init of_ti_dpll_setup(struct device_node *node,
+				    const struct clk_ops *ops,
+				    const struct dpll_data *ddt,
+				    u8 init_flags)
+{
+	struct clk_hw_omap *clk_hw = NULL;
+	struct clk_init_data *init = NULL;
+	const char **parent_names = NULL;
+	struct dpll_data *dd = NULL;
+	int i;
+	u8 dpll_mode = 0;
+
+	dd = kzalloc(sizeof(*dd), GFP_KERNEL);
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	init = kzalloc(sizeof(*init), GFP_KERNEL);
+	if (!dd || !clk_hw || !init)
+		goto cleanup;
+
+	memcpy(dd, ddt, sizeof(*dd));
+
+	clk_hw->dpll_data = dd;
+	clk_hw->ops = &clkhwops_omap3_dpll;
+	clk_hw->hw.init = init;
+	clk_hw->flags = MEMMAP_ADDRESSING;
+
+	init->name = node->name;
+	init->ops = ops;
+
+	init->num_parents = of_clk_get_parent_count(node);
+	if (init->num_parents < 1) {
+		pr_err("%s must have parent(s)\n", node->name);
+		goto cleanup;
+	}
+
+	parent_names = kzalloc(sizeof(char *) * init->num_parents, GFP_KERNEL);
+	if (!parent_names)
+		goto cleanup;
+
+	for (i = 0; i < init->num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	init->parent_names = parent_names;
+
+	dd->control_reg = ti_clk_get_reg_addr(node, 0);
+	dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
+	dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
+
+	if (!dd->control_reg || !dd->idlest_reg || !dd->mult_div1_reg)
+		goto cleanup;
+
+	if (init_flags & DPLL_HAS_AUTOIDLE) {
+		dd->autoidle_reg = ti_clk_get_reg_addr(node, 3);
+		if (!dd->autoidle_reg)
+			goto cleanup;
+	}
+
+	if (of_property_read_bool(node, "ti,low-power-stop"))
+		dpll_mode |= 1 << DPLL_LOW_POWER_STOP;
+
+	if (of_property_read_bool(node, "ti,low-power-bypass"))
+		dpll_mode |= 1 << DPLL_LOW_POWER_BYPASS;
+
+	if (of_property_read_bool(node, "ti,lock"))
+		dpll_mode |= 1 << DPLL_LOCKED;
+
+	if (dpll_mode)
+		dd->modes = dpll_mode;
+
+	ti_clk_register_dpll(&clk_hw->hw, node);
+	return;
+
+cleanup:
+	kfree(dd);
+	kfree(parent_names);
+	kfree(init);
+	kfree(clk_hw);
+}
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
+static void __init of_ti_omap4_dpll_x2_setup(struct device_node *node)
+{
+	ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, &clkhwops_omap4_dpllmx);
+}
+CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock",
+	       of_ti_omap4_dpll_x2_setup);
+#endif
+
+#ifdef CONFIG_SOC_AM33XX
+static void __init of_ti_am3_dpll_x2_setup(struct device_node *node)
+{
+	ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL);
+}
+CLK_OF_DECLARE(ti_am3_dpll_x2_clock, "ti,am3-dpll-x2-clock",
+	       of_ti_am3_dpll_x2_setup);
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static void __init of_ti_omap3_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.freqsel_mask = 0xf0,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock",
+	       of_ti_omap3_dpll_setup);
+
+static void __init of_ti_omap3_core_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 16,
+		.div1_mask = 0x7f << 8,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.freqsel_mask = 0xf0,
+	};
+
+	of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd, DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock",
+	       of_ti_omap3_core_dpll_setup);
+
+static void __init of_ti_omap3_per_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1 << 1,
+		.enable_mask = 0x7 << 16,
+		.autoidle_mask = 0x7 << 3,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.freqsel_mask = 0xf00000,
+		.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd, DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock",
+	       of_ti_omap3_per_dpll_setup);
+
+static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1 << 1,
+		.enable_mask = 0x7 << 16,
+		.autoidle_mask = 0x7 << 3,
+		.mult_mask = 0xfff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 4095,
+		.max_divider = 128,
+		.min_divider = 1,
+		.sddiv_mask = 0xff << 24,
+		.dco_mask = 0xe << 20,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd, DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock",
+	       of_ti_omap3_per_jtype_dpll_setup);
+#endif
+
+static void __init of_ti_omap4_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock",
+	       of_ti_omap4_dpll_setup);
+
+static void __init of_ti_omap4_core_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock",
+	       of_ti_omap4_core_dpll_setup);
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
+static void __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.m4xen_mask = 0x800,
+		.lpmode_mask = 1 << 10,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd, DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock",
+	       of_ti_omap4_m4xen_dpll_setup);
+
+static void __init of_ti_omap4_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0xfff << 8,
+		.div1_mask = 0xff,
+		.max_multiplier = 4095,
+		.max_divider = 256,
+		.min_divider = 1,
+		.sddiv_mask = 0xff << 24,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd, DPLL_HAS_AUTOIDLE);
+}
+CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock",
+	       of_ti_omap4_jtype_dpll_setup);
+#endif
+
+static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock",
+	       of_ti_am3_no_gate_dpll_setup);
+
+static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 4095,
+		.max_divider = 256,
+		.min_divider = 2,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock",
+	       of_ti_am3_jtype_dpll_setup);
+
+static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.flags = DPLL_J_TYPE,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock,
+	       "ti,am3-dpll-no-gate-j-type-clock",
+	       of_ti_am3_no_gate_jtype_dpll_setup);
+
+static void __init of_ti_am3_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup);
+
+static void __init of_ti_am3_core_dpll_setup(struct device_node *node)
+{
+	const struct dpll_data dd = {
+		.idlest_mask = 0x1,
+		.enable_mask = 0x7,
+		.autoidle_mask = 0x7,
+		.mult_mask = 0x7ff << 8,
+		.div1_mask = 0x7f,
+		.max_multiplier = 2047,
+		.max_divider = 128,
+		.min_divider = 1,
+		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	};
+
+	of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, 0);
+}
+CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock",
+	       of_ti_am3_core_dpll_setup);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 6a2e497..c2ffbf6 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -18,6 +18,153 @@
 #include <linux/clkdev.h>
 
 /**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @last_rounded_m4xen: cache of the last M4X result of
+ *			omap4_dpll_regm4xen_round_rate()
+ * @last_rounded_lpmode: cache of the last lpmode result of
+ *			 omap4_dpll_lpmode_recalc()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
+ * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+	void __iomem		*mult_div1_reg;
+	u32			mult_mask;
+	u32			div1_mask;
+	struct clk		*clk_bypass;
+	struct clk		*clk_ref;
+	void __iomem		*control_reg;
+	u32			enable_mask;
+	unsigned long		last_rounded_rate;
+	u16			last_rounded_m;
+	u8			last_rounded_m4xen;
+	u8			last_rounded_lpmode;
+	u16			max_multiplier;
+	u8			last_rounded_n;
+	u8			min_divider;
+	u16			max_divider;
+	u8			modes;
+	void __iomem		*autoidle_reg;
+	void __iomem		*idlest_reg;
+	u32			autoidle_mask;
+	u32			freqsel_mask;
+	u32			idlest_mask;
+	u32			dco_mask;
+	u32			sddiv_mask;
+	u32			lpmode_mask;
+	u32			m4xen_mask;
+	u8			auto_recal_bit;
+	u8			recal_en_bit;
+	u8			recal_st_bit;
+	u8			flags;
+};
+
+struct clk_hw_omap_ops;
+
+/**
+ * struct clk_hw_omap - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @ops: clock ops for this clock
+ */
+struct clk_hw_omap {
+	struct clk_hw		hw;
+	struct list_head	node;
+	unsigned long		fixed_rate;
+	u8			fixed_div;
+	void __iomem		*enable_reg;
+	u8			enable_bit;
+	u8			flags;
+	void __iomem		*clksel_reg;
+	u32			clksel_mask;
+	const struct clksel	*clksel;
+	struct dpll_data	*dpll_data;
+	const char		*clkdm_name;
+	struct clockdomain	*clkdm;
+	const struct clk_hw_omap_ops	*ops;
+};
+
+/*
+ * struct clk_hw_omap.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed
+ *     with 32bit ops, by default OMAP1 uses 16bit ops.
+ * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support.
+ * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent
+ *     clock is put to no-idle mode.
+ * ENABLE_ON_INIT: Clock is enabled on init.
+ * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0'
+ *     disable. This inverts the behavior making '0' enable and '1' disable.
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ * MEMMAP_ADDRESSING: Use memmap addressing to access clock registers.
+ */
+#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL	(1 << 1)
+#define CLOCK_NO_IDLE_PARENT	(1 << 2)
+#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
+#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2		(1 << 5)
+#define MEMMAP_ADDRESSING	(1 << 6)
+
+/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
+#define DPLL_LOW_POWER_STOP	0x1
+#define DPLL_LOW_POWER_BYPASS	0x5
+#define DPLL_LOCKED		0x7
+
+/* DPLL Type and DCO Selection Flags */
+#define DPLL_J_TYPE		0x1
+
+/**
  * struct ti_dt_clk - OMAP DT clock alias declarations
  * @lk: clock lookup definition
  * @node_name: clock DT node to map to
@@ -53,10 +200,35 @@ struct clk_omap_reg {
 
 extern struct clk_ll_ops *ti_clk_ll_ops;
 
+#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
+
+void omap2_init_clk_hw_omap_clocks(struct clk *clk);
+int omap3_noncore_dpll_enable(struct clk_hw *hw);
+void omap3_noncore_dpll_disable(struct clk_hw *hw);
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate);
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+					 unsigned long parent_rate);
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+				    unsigned long target_rate,
+				    unsigned long *parent_rate);
+u8 omap2_init_dpll_parent(struct clk_hw *hw);
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+			   unsigned long *parent_rate);
+void omap2_init_clk_clkdm(struct clk_hw *clk);
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+				    unsigned long parent_rate);
+int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
+			 unsigned long parent_rate);
+
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
 void ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
 		       ti_of_clk_init_cb_t func);
 
+extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
+extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+
 #endif
-- 
1.7.9.5

[PATCHv11 13/49] CLK: TI: add autoidle support

[Tero Kristo]

TI clk driver now routes some of the basic clocks through own
registration routine to allow autoidle support. This routine just
checks a couple of device node properties and adds autoidle support
if required, and just passes the registration forward to basic clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/autoidle.txt      |   39 ++++++
 arch/arm/mach-omap2/clock.c                        |    6 +
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/autoidle.c                          |  133 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    9 ++
 5 files changed, 188 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/autoidle.txt
 create mode 100644 drivers/clk/ti/autoidle.c

diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
new file mode 100644
index 0000000..7c735dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
@@ -0,0 +1,39 @@
+Binding for Texas Instruments autoidle clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a register mapped
+clock which can be put to idle automatically by hardware based on the usage
+and a configuration bit setting. Autoidle clock is never an individual
+clock, it is always a derivative of some basic clock like a gate, divider,
+or fixed-factor.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- reg : offset for the register controlling the autoidle
+- ti,autoidle-shift : bit shift of the autoidle enable bit
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0
+
+Examples:
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index c7c5d31..238be3f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -520,6 +520,9 @@ int omap2_clk_enable_autoidle_all(void)
 	list_for_each_entry(c, &clk_hw_omap_clocks, node)
 		if (c->ops && c->ops->allow_idle)
 			c->ops->allow_idle(c);
+
+	of_ti_clk_allow_autoidle_all();
+
 	return 0;
 }
 
@@ -539,6 +542,9 @@ int omap2_clk_disable_autoidle_all(void)
 	list_for_each_entry(c, &clk_hw_omap_clocks, node)
 		if (c->ops && c->ops->deny_idle)
 			c->ops->deny_idle(c);
+
+	of_ti_clk_deny_autoidle_all();
+
 	return 0;
 }
 
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 05af5d8..533efb4 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,3 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o dpll.o
+obj-y					+= clk.o dpll.o autoidle.o
 endif
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
new file mode 100644
index 0000000..8912ff8
--- /dev/null
+++ b/drivers/clk/ti/autoidle.c
@@ -0,0 +1,133 @@
+/*
+ * TI clock autoidle support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+struct clk_ti_autoidle {
+	void __iomem		*reg;
+	u8			shift;
+	u8			flags;
+	const char		*name;
+	struct list_head	node;
+};
+
+#define AUTOIDLE_LOW		0x1
+
+static LIST_HEAD(autoidle_clks);
+
+static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
+{
+	u32 val;
+
+	val = ti_clk_ll_ops->clk_readl(clk->reg);
+
+	if (clk->flags & AUTOIDLE_LOW)
+		val &= ~(1 << clk->shift);
+	else
+		val |= (1 << clk->shift);
+
+	ti_clk_ll_ops->clk_writel(val, clk->reg);
+}
+
+static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
+{
+	u32 val;
+
+	val = ti_clk_ll_ops->clk_readl(clk->reg);
+
+	if (clk->flags & AUTOIDLE_LOW)
+		val |= (1 << clk->shift);
+	else
+		val &= ~(1 << clk->shift);
+
+	ti_clk_ll_ops->clk_writel(val, clk->reg);
+}
+
+/**
+ * of_ti_clk_allow_autoidle_all - enable autoidle for all clocks
+ *
+ * Enables hardware autoidle for all registered DT clocks, which have
+ * the feature.
+ */
+void of_ti_clk_allow_autoidle_all(void)
+{
+	struct clk_ti_autoidle *c;
+
+	list_for_each_entry(c, &autoidle_clks, node)
+		ti_allow_autoidle(c);
+}
+
+/**
+ * of_ti_clk_deny_autoidle_all - disable autoidle for all clocks
+ *
+ * Disables hardware autoidle for all registered DT clocks, which have
+ * the feature.
+ */
+void of_ti_clk_deny_autoidle_all(void)
+{
+	struct clk_ti_autoidle *c;
+
+	list_for_each_entry(c, &autoidle_clks, node)
+		ti_deny_autoidle(c);
+}
+
+/**
+ * of_ti_clk_autoidle_setup - sets up hardware autoidle for a clock
+ * @node: pointer to the clock device node
+ *
+ * Checks if a clock has hardware autoidle support or not (check
+ * for presence of 'ti,autoidle-shift' property in the device tree
+ * node) and sets up the hardware autoidle feature for the clock
+ * if available. If autoidle is available, the clock is also added
+ * to the autoidle list for later processing. Returns 0 on success,
+ * negative error value on failure.
+ */
+int __init of_ti_clk_autoidle_setup(struct device_node *node)
+{
+	u32 shift;
+	struct clk_ti_autoidle *clk;
+
+	/* Check if this clock has autoidle support or not */
+	if (of_property_read_u32(node, "ti,autoidle-shift", &shift))
+		return 0;
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+
+	if (!clk)
+		return -ENOMEM;
+
+	clk->shift = shift;
+	clk->name = node->name;
+	clk->reg = ti_clk_get_reg_addr(node, 0);
+
+	if (!clk->reg) {
+		kfree(clk);
+		return -EINVAL;
+	}
+
+	if (of_property_read_bool(node, "ti,invert-autoidle-bit"))
+		clk->flags |= AUTOIDLE_LOW;
+
+	list_add(&clk->node, &autoidle_clks);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index c2ffbf6..c7e4f98 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -227,6 +227,15 @@ void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
 void ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
 		       ti_of_clk_init_cb_t func);
+int of_ti_clk_autoidle_setup(struct device_node *node);
+
+#ifdef CONFIG_OF
+void of_ti_clk_allow_autoidle_all(void);
+void of_ti_clk_deny_autoidle_all(void);
+#else
+static inline void of_ti_clk_allow_autoidle_all(void) { }
+static inline void of_ti_clk_deny_autoidle_all(void) { }
+#endif
 
 extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
 extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
-- 
1.7.9.5

[PATCHv11 14/49] clk: ti: add composite clock support

[Tero Kristo]

This is a multipurpose clock node, which contains support for multiple
sub-clocks. Uses basic composite clock type to implement the actual
functionality, and TI specific gate, mux and divider clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/composite.txt     |   54 ++++
 arch/arm/mach-omap2/clock.h                        |    3 -
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/composite.c                         |  266 ++++++++++++++++++++
 include/linux/clk/ti.h                             |   12 +
 5 files changed, 333 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/composite.txt
 create mode 100644 drivers/clk/ti/composite.c

diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
new file mode 100644
index 0000000..5f43c47
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
@@ -0,0 +1,54 @@
+Binding for TI composite clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped composite clock with multiple different sub-types;
+
+a multiplexer clock with multiple input clock signals or parents, one
+of which can be selected as output, this behaves exactly as [2]
+
+an adjustable clock rate divider, this behaves exactly as [3]
+
+a gating function which can be used to enable and disable the output
+clock, this behaves exactly as [4]
+
+The binding must provide a list of the component clocks that shall be
+merged to this clock. The component clocks shall be of one of the
+"ti,*composite*-clock" types.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/mux.txt
+[3] Documentation/devicetree/bindings/clock/ti/divider.txt
+[4] Documentation/devicetree/bindings/clock/ti/gate.txt
+
+Required properties:
+- compatible : shall be: "ti,composite-clock"
+- clocks : link phandles of component clocks
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Examples:
+
+usb_l4_gate_ick: usb_l4_gate_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-interface-clock";
+	clocks = <&l4_ick>;
+	ti,bit-shift = <5>;
+	reg = <0x0a10>;
+};
+
+usb_l4_div_ick: usb_l4_div_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&l4_ick>;
+	ti,bit-shift = <4>;
+	ti,max-div = <1>;
+	reg = <0x0a40>;
+	ti,index-starts-at-one;
+};
+
+usb_l4_ick: usb_l4_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-clock";
+	clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b345f3e..6bd72b5 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -240,9 +240,6 @@ extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
 
 unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
 
-int omap2_dflt_clk_enable(struct clk_hw *hw);
-void omap2_dflt_clk_disable(struct clk_hw *hw);
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
 				   void __iomem **other_reg,
 				   u8 *other_bit);
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 533efb4..a4a7595 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,3 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o dpll.o autoidle.o
+obj-y					+= clk.o dpll.o autoidle.o composite.o
 endif
diff --git a/drivers/clk/ti/composite.c b/drivers/clk/ti/composite.c
new file mode 100644
index 0000000..f0c77fb
--- /dev/null
+++ b/drivers/clk/ti/composite.c
@@ -0,0 +1,266 @@
+/*
+ * TI composite clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+#include <linux/list.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
+
+static unsigned long ti_composite_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	return clk_divider_ops.recalc_rate(hw, parent_rate);
+}
+
+static long ti_composite_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *prate)
+{
+	return -EINVAL;
+}
+
+static int ti_composite_set_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	return -EINVAL;
+}
+
+static const struct clk_ops ti_composite_divider_ops = {
+	.recalc_rate	= &ti_composite_recalc_rate,
+	.round_rate	= &ti_composite_round_rate,
+	.set_rate	= &ti_composite_set_rate,
+};
+
+static const struct clk_ops ti_composite_gate_ops = {
+	.enable		= &omap2_dflt_clk_enable,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+struct component_clk {
+	int num_parents;
+	const char **parent_names;
+	struct device_node *node;
+	int type;
+	struct clk_hw *hw;
+	struct list_head link;
+};
+
+static const char * __initconst component_clk_types[] = {
+	"gate", "divider", "mux"
+};
+
+static LIST_HEAD(component_clks);
+
+static struct device_node *_get_component_node(struct device_node *node, int i)
+{
+	int rc;
+	struct of_phandle_args clkspec;
+
+	rc = of_parse_phandle_with_args(node, "clocks", "#clock-cells", i,
+					&clkspec);
+	if (rc)
+		return NULL;
+
+	return clkspec.np;
+}
+
+static struct component_clk *_lookup_component(struct device_node *node)
+{
+	struct component_clk *comp;
+
+	list_for_each_entry(comp, &component_clks, link) {
+		if (comp->node == node)
+			return comp;
+	}
+	return NULL;
+}
+
+struct clk_hw_omap_comp {
+	struct clk_hw hw;
+	struct device_node *comp_nodes[CLK_COMPONENT_TYPE_MAX];
+	struct component_clk *comp_clks[CLK_COMPONENT_TYPE_MAX];
+};
+
+static inline struct clk_hw *_get_hw(struct clk_hw_omap_comp *clk, int idx)
+{
+	if (!clk)
+		return NULL;
+
+	if (!clk->comp_clks[idx])
+		return NULL;
+
+	return clk->comp_clks[idx]->hw;
+}
+
+#define to_clk_hw_comp(_hw) container_of(_hw, struct clk_hw_omap_comp, hw)
+
+static void __init ti_clk_register_composite(struct clk_hw *hw,
+					     struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_hw_omap_comp *cclk = to_clk_hw_comp(hw);
+	struct component_clk *comp;
+	int num_parents = 0;
+	const char **parent_names = NULL;
+	int i;
+
+	/* Check for presence of each component clock */
+	for (i = 0; i < CLK_COMPONENT_TYPE_MAX; i++) {
+		if (!cclk->comp_nodes[i])
+			continue;
+
+		comp = _lookup_component(cclk->comp_nodes[i]);
+		if (!comp) {
+			pr_debug("component %s not ready for %s, retry\n",
+				 cclk->comp_nodes[i]->name, node->name);
+			ti_clk_retry_init(node, hw, ti_clk_register_composite);
+			return;
+		}
+		if (cclk->comp_clks[comp->type] != NULL) {
+			pr_err("duplicate component types for %s (%s)!\n",
+			       node->name, component_clk_types[comp->type]);
+			goto cleanup;
+		}
+
+		cclk->comp_clks[comp->type] = comp;
+
+		/* Mark this node as found */
+		cclk->comp_nodes[i] = NULL;
+	}
+
+	/* All components exists, proceed with registration */
+	for (i = CLK_COMPONENT_TYPE_MAX - 1; i >= 0; i--) {
+		comp = cclk->comp_clks[i];
+		if (!comp)
+			continue;
+		if (comp->num_parents) {
+			num_parents = comp->num_parents;
+			parent_names = comp->parent_names;
+			break;
+		}
+	}
+
+	if (!num_parents) {
+		pr_err("%s: no parents found for %s!\n", __func__, node->name);
+		goto cleanup;
+	}
+
+	clk = clk_register_composite(NULL, node->name,
+				     parent_names, num_parents,
+				     _get_hw(cclk, CLK_COMPONENT_TYPE_MUX),
+				     &clk_mux_ops,
+				     _get_hw(cclk, CLK_COMPONENT_TYPE_DIVIDER),
+				     &ti_composite_divider_ops,
+				     _get_hw(cclk, CLK_COMPONENT_TYPE_GATE),
+				     &ti_composite_gate_ops, 0);
+
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+cleanup:
+	/* Free component clock list entries */
+	for (i = 0; i < CLK_COMPONENT_TYPE_MAX; i++) {
+		if (!cclk->comp_clks[i])
+			continue;
+		list_del(&cclk->comp_clks[i]->link);
+		kfree(cclk->comp_clks[i]);
+	}
+
+	kfree(cclk);
+}
+
+static void __init of_ti_composite_clk_setup(struct device_node *node)
+{
+	int num_clks;
+	int i;
+	struct clk_hw_omap_comp *cclk;
+
+	/* Number of component clocks to be put inside this clock */
+	num_clks = of_clk_get_parent_count(node);
+
+	if (num_clks < 1) {
+		pr_err("composite clk %s must have component(s)\n", node->name);
+		return;
+	}
+
+	cclk = kzalloc(sizeof(*cclk), GFP_KERNEL);
+	if (!cclk)
+		return;
+
+	/* Get device node pointers for each component clock */
+	for (i = 0; i < num_clks; i++)
+		cclk->comp_nodes[i] = _get_component_node(node, i);
+
+	ti_clk_register_composite(&cclk->hw, node);
+}
+CLK_OF_DECLARE(ti_composite_clock, "ti,composite-clock",
+	       of_ti_composite_clk_setup);
+
+/**
+ * ti_clk_add_component - add a component clock to the pool
+ * @node: device node of the component clock
+ * @hw: hardware clock definition for the component clock
+ * @type: type of the component clock
+ *
+ * Adds a component clock to the list of available components, so that
+ * it can be registered by a composite clock.
+ */
+int __init ti_clk_add_component(struct device_node *node, struct clk_hw *hw,
+				int type)
+{
+	int num_parents;
+	const char **parent_names;
+	struct component_clk *clk;
+	int i;
+
+	num_parents = of_clk_get_parent_count(node);
+
+	if (num_parents < 1) {
+		pr_err("component-clock %s must have parent(s)\n", node->name);
+		return -EINVAL;
+	}
+
+	parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL);
+	if (!parent_names)
+		return -ENOMEM;
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+	if (!clk) {
+		kfree(parent_names);
+		return -ENOMEM;
+	}
+
+	clk->num_parents = num_parents;
+	clk->parent_names = parent_names;
+	clk->hw = hw;
+	clk->node = node;
+	clk->type = type;
+	list_add(&clk->link, &component_clks);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index c7e4f98..e1b504c 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -164,6 +164,14 @@ struct clk_hw_omap {
 /* DPLL Type and DCO Selection Flags */
 #define DPLL_J_TYPE		0x1
 
+/* Composite clock component types */
+enum {
+	CLK_COMPONENT_TYPE_GATE = 0,
+	CLK_COMPONENT_TYPE_DIVIDER,
+	CLK_COMPONENT_TYPE_MUX,
+	CLK_COMPONENT_TYPE_MAX,
+};
+
 /**
  * struct ti_dt_clk - OMAP DT clock alias declarations
  * @lk: clock lookup definition
@@ -221,6 +229,9 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
@@ -228,6 +239,7 @@ void ti_dt_clk_init_provider(struct device_node *np, int index);
 void ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
 		       ti_of_clk_init_cb_t func);
 int of_ti_clk_autoidle_setup(struct device_node *node);
+int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv11 15/49] CLK: ti: add support for ti divider-clock

[Tero Kristo]

This patch adds support for TI divider clock binding, which simply uses
the basic clock divider to provide the features needed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/divider.txt       |  114 ++++++++++
 drivers/clk/ti/Makefile                            |    3 +-
 drivers/clk/ti/divider.c                           |  225 ++++++++++++++++++++
 3 files changed, 341 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/divider.txt
 create mode 100644 drivers/clk/ti/divider.c

diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt
new file mode 100644
index 0000000..35a6f5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/divider.txt
@@ -0,0 +1,114 @@
+Binding for TI divider clock
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped adjustable clock rate divider that does not gate and has
+only one input clock or parent.  By default the value programmed into
+the register is one less than the actual divisor value.  E.g:
+
+register value		actual divisor value
+0			1
+1			2
+2			3
+
+This assumption may be modified by the following optional properties:
+
+ti,index-starts-at-one - valid divisor values start at 1, not the default
+of 0.  E.g:
+register value		actual divisor value
+1			1
+2			2
+3			3
+
+ti,index-power-of-two - valid divisor values are powers of two.  E.g:
+register value		actual divisor value
+0			1
+1			2
+2			4
+
+Additionally an array of valid dividers may be supplied like so:
+
+	ti,dividers = <4>, <8>, <0>, <16>;
+
+Which will map the resulting values to a divisor table by their index:
+register value		actual divisor value
+0			4
+1			8
+2			<invalid divisor, skipped>
+3			16
+
+Any zero value in this array means the corresponding bit-value is invalid
+and must not be used.
+
+The binding must also provide the register to control the divider and
+unless the divider array is provided, min and max dividers. Optionally
+the number of bits to shift that mask, if necessary. If the shift value
+is missing it is the same as supplying a zero shift.
+
+This binding can also optionally provide support to the hardware autoidle
+feature, see [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,divider-clock" or "ti,composite-divider-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable divider
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,dividers : array of integers defining divisors
+- ti,bit-shift : number of bits to shift the divider value, defaults to 0
+- ti,min-div : min divisor for dividing the input clock rate, only
+  needed if the first divisor is offset from the default value (1)
+- ti,max-div : max divisor for dividing the input clock rate, only needed
+  if ti,dividers is not defined.
+- ti,index-starts-at-one : valid divisor programming starts at 1, not zero,
+  only valid if ti,dividers is not defined.
+- ti,index-power-of-two : valid divisor programming must be a power of two,
+  only valid if ti,dividers is not defined.
+- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock,
+  see [2]
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0,
+  see [2]
+- ti,set-rate-parent : clk_set_rate is propagated to parent
+
+Examples:
+dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 {
+	#clock-cells = <0>;
+	compatible = "ti,divider-clock";
+	clocks = <&dpll_usb_ck>;
+	ti,max-div = <127>;
+	reg = <0x190>;
+	ti,index-starts-at-one;
+};
+
+aess_fclk: aess_fclk@4a004528 {
+	#clock-cells = <0>;
+	compatible = "ti,divider-clock";
+	clocks = <&abe_clk>;
+	ti,bit-shift = <24>;
+	reg = <0x528>;
+	ti,max-div = <2>;
+};
+
+dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&dpll_core_x2_ck>;
+	ti,max-div = <31>;
+	reg = <0x0134>;
+	ti,index-starts-at-one;
+};
+
+ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&corex2_fck>;
+	ti,bit-shift = <8>;
+	reg = <0x0a40>;
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index a4a7595..640ebf9 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,3 +1,4 @@
 ifneq ($(CONFIG_OF),)
-obj-y					+= clk.o dpll.o autoidle.o composite.o
+obj-y					+= clk.o dpll.o autoidle.o divider.o \
+					   composite.o
 endif
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
new file mode 100644
index 0000000..3d772d6
--- /dev/null
+++ b/drivers/clk/ti/divider.c
@@ -0,0 +1,225 @@
+/*
+ * TI Divider Clock
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static struct clk_div_table
+__init *ti_clk_get_div_table(struct device_node *node)
+{
+	struct clk_div_table *table;
+	const __be32 *divspec;
+	u32 val;
+	u32 num_div;
+	u32 valid_div;
+	int i;
+
+	divspec = of_get_property(node, "ti,dividers", &num_div);
+
+	if (!divspec)
+		return NULL;
+
+	num_div /= 4;
+
+	valid_div = 0;
+
+	/* Determine required size for divider table */
+	for (i = 0; i < num_div; i++) {
+		of_property_read_u32_index(node, "ti,dividers", i, &val);
+		if (val)
+			valid_div++;
+	}
+
+	if (!valid_div) {
+		pr_err("no valid dividers for %s table\n", node->name);
+		return ERR_PTR(-EINVAL);
+	}
+
+	table = kzalloc(sizeof(*table) * (valid_div + 1), GFP_KERNEL);
+
+	if (!table)
+		return ERR_PTR(-ENOMEM);
+
+	valid_div = 0;
+
+	for (i = 0; i < num_div; i++) {
+		of_property_read_u32_index(node, "ti,dividers", i, &val);
+		if (val) {
+			table[valid_div].div = val;
+			table[valid_div].val = i;
+			valid_div++;
+		}
+	}
+
+	return table;
+}
+
+static int _get_divider_width(struct device_node *node,
+			      const struct clk_div_table *table,
+			      u8 flags)
+{
+	u32 min_div;
+	u32 max_div;
+	u32 val = 0;
+	u32 div;
+
+	if (!table) {
+		/* Clk divider table not provided, determine min/max divs */
+		if (of_property_read_u32(node, "ti,min-div", &min_div))
+			min_div = 1;
+
+		if (of_property_read_u32(node, "ti,max-div", &max_div)) {
+			pr_err("no max-div for %s!\n", node->name);
+			return -EINVAL;
+		}
+
+		/* Determine bit width for the field */
+		if (flags & CLK_DIVIDER_ONE_BASED)
+			val = 1;
+
+		div = min_div;
+
+		while (div < max_div) {
+			if (flags & CLK_DIVIDER_POWER_OF_TWO)
+				div <<= 1;
+			else
+				div++;
+			val++;
+		}
+	} else {
+		div = 0;
+
+		while (table[div].div) {
+			val = table[div].val;
+			div++;
+		}
+	}
+
+	return fls(val);
+}
+
+static int __init ti_clk_divider_populate(struct device_node *node,
+	void __iomem **reg, const struct clk_div_table **table,
+	unsigned long *flags, u8 *div_flags, u8 *width, u8 *shift)
+{
+	u32 val;
+
+	*reg = ti_clk_get_reg_addr(node, 0);
+	if (!*reg)
+		return -EINVAL;
+
+	if (!of_property_read_u32(node, "ti,bit-shift", &val))
+		*shift = val;
+	else
+		*shift = 0;
+
+	*flags = 0;
+	*div_flags = 0;
+
+	if (of_property_read_bool(node, "ti,index-starts-at-one"))
+		*div_flags |= CLK_DIVIDER_ONE_BASED;
+
+	if (of_property_read_bool(node, "ti,index-power-of-two"))
+		*div_flags |= CLK_DIVIDER_POWER_OF_TWO;
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		*flags |= CLK_SET_RATE_PARENT;
+
+	*table = ti_clk_get_div_table(node);
+
+	if (IS_ERR(*table))
+		return PTR_ERR(*table);
+
+	*width = _get_divider_width(node, *table, *div_flags);
+
+	return 0;
+}
+
+/**
+ * of_ti_divider_clk_setup - Setup function for simple div rate clock
+ * @node: device node for this clock
+ *
+ * Sets up a basic divider clock.
+ */
+static void __init of_ti_divider_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_divider_desc *desc;
+	const char *parent_name;
+
+	desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+	if (!desc)
+		return;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	desc->desc.parent_names = &parent_name;
+	desc->desc.num_parents = 1;
+	desc->desc.register_func = clk_register_divider_desc;
+	desc->desc.name = node->name;
+	desc->ll_ops = ti_clk_ll_ops;
+
+	if (ti_clk_divider_populate(node, &desc->reg, &desc->table,
+				    &desc->desc.flags, &desc->flags,
+				    &desc->width, &desc->shift) < 0)
+		goto cleanup;
+
+	clk = clk_register_desc(NULL, &desc->desc);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		of_ti_clk_autoidle_setup(node);
+		kfree(desc);
+		return;
+	}
+
+cleanup:
+	kfree(desc->table);
+	kfree(desc);
+}
+CLK_OF_DECLARE(divider_clk, "ti,divider-clock", of_ti_divider_clk_setup);
+
+static void __init of_ti_composite_divider_clk_setup(struct device_node *node)
+{
+	struct clk_divider *div;
+	unsigned long val;
+
+	div = kzalloc(sizeof(*div), GFP_KERNEL);
+	if (!div)
+		return;
+
+	div->ll_ops = ti_clk_ll_ops;
+
+	if (ti_clk_divider_populate(node, &div->reg, &div->table, &val,
+				    &div->flags, &div->width, &div->shift) < 0)
+		goto cleanup;
+
+	if (!ti_clk_add_component(node, &div->hw, CLK_COMPONENT_TYPE_DIVIDER))
+		return;
+
+cleanup:
+	kfree(div->table);
+	kfree(div);
+}
+CLK_OF_DECLARE(ti_composite_divider_clk, "ti,composite-divider-clock",
+	       of_ti_composite_divider_clk_setup);
-- 
1.7.9.5

[PATCHv11 16/49] clk: ti: add support for TI fixed factor clock

[Tero Kristo]

This behaves exactly in similar manner to basic fixed-factor-clock, but
adds a few properties on top for handling clock hardware autoidling.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../bindings/clock/ti/fixed-factor-clock.txt       |   43 +++++++++++++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/fixed-factor.c                      |   66 ++++++++++++++++++++
 3 files changed, 110 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
 create mode 100644 drivers/clk/ti/fixed-factor.c

diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
new file mode 100644
index 0000000..662b36d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
@@ -0,0 +1,43 @@
+Binding for TI fixed factor rate clock sources.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1], and also uses the autoidle
+support from TI autoidle clock [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,fixed-factor-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- ti,clock-div: fixed divider.
+- ti,clock-mult: fixed multiplier.
+- clocks: parent clock.
+
+Optional properties:
+- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
+  see [2]
+- reg: offset for the autoidle register of this clock, see [2]
+- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2]
+- ti,set-rate-parent: clk_set_rate is propagated to parent
+
+Example:
+	clock {
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&parentclk>;
+		#clock-cells = <0>;
+		ti,clock-div = <2>;
+		ti,clock-mult = <1>;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 640ebf9..f57fc4b 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,4 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
-					   composite.o
+					   fixed-factor.o composite.o
 endif
diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c
new file mode 100644
index 0000000..c2c8a28
--- /dev/null
+++ b/drivers/clk/ti/fixed-factor.c
@@ -0,0 +1,66 @@
+/*
+ * TI Fixed Factor Clock
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+/**
+ * of_ti_fixed_factor_clk_setup - Setup function for TI fixed factor clock
+ * @node: device node for this clock
+ *
+ * Sets up a simple fixed factor clock based on device tree info.
+ */
+static void __init of_ti_fixed_factor_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	u32 div, mult;
+	u32 flags = 0;
+
+	if (of_property_read_u32(node, "ti,clock-div", &div)) {
+		pr_err("%s must have a clock-div property\n", node->name);
+		return;
+	}
+
+	if (of_property_read_u32(node, "ti,clock-mult", &mult)) {
+		pr_err("%s must have a clock-mult property\n", node->name);
+		return;
+	}
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		flags |= CLK_SET_RATE_PARENT;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+
+	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, flags,
+					mult, div);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		of_ti_clk_autoidle_setup(node);
+	}
+}
+CLK_OF_DECLARE(ti_fixed_factor_clk, "ti,fixed-factor-clock",
+	       of_ti_fixed_factor_clk_setup);
-- 
1.7.9.5

[PATCHv11 17/49] CLK: TI: add support for gate clock

[Tero Kristo]

This patch adds support for TI specific gate clocks. These behave as basic
gate-clock, but have different ops / hw-ops for controlling the actual
gate, for example waiting until the clock is ready. Several sub-types
are supported:
- ti,gate-clock: basic gate clock with default ops/hwops
- ti,clkdm-gate-clock: clockdomain level gate control
- ti,dss-gate-clock: gate clock with DSS specific hardware handling
- ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling
- ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/gate.txt          |   85 +++++++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/gate.c                              |  245 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    6 +
 4 files changed, 337 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/gate.txt
 create mode 100644 drivers/clk/ti/gate.c

diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
new file mode 100644
index 0000000..125281a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -0,0 +1,85 @@
+Binding for Texas Instruments gate clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features. If no register
+is provided for this clock, the code assumes that a clockdomain
+will be controlled instead and the corresponding hw-ops for
+that is used.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+
+Required properties:
+- compatible : shall be one of:
+  "ti,gate-clock" - basic gate clock
+  "ti,wait-gate-clock" - gate clock which waits until clock is active before
+			 returning from clk_enable()
+  "ti,dss-gate-clock" - gate clock with DSS specific hardware handling
+  "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
+  "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
+			  clock directly from a clockdomain, see [3] how
+			  to map clockdomains properly
+  "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
+			  required for a hardware errata
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable gate, not needed for
+	ti,clkdm-gate-clock type
+
+Optional properties:
+- ti,bit-shift : bit shift for programming the clock gate, invalid for
+		 ti,clkdm-gate-clock type
+- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
+  gates the clock and clearing the bit ungates the clock.
+
+Examples:
+	mmchs2_fck: mmchs2_fck@48004a00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x48004a00 0x4>;
+		ti,bit-shift = <25>;
+	};
+
+	uart4_fck_am35xx: uart4_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+
+	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		reg = <0x48004e00 0x4>;
+		ti,bit-shift = <0>;
+	};
+
+	emac_ick: emac_ick@4800259c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x4800259c 0x4>;
+		ti,bit-shift = <1>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x48004d00 0x4>;
+		ti,set-bit-to-disable;
+	};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index f57fc4b..7cba389 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,4 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
-					   fixed-factor.o composite.o
+					   fixed-factor.o gate.o composite.o
 endif
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
new file mode 100644
index 0000000..3f74911
--- /dev/null
+++ b/drivers/clk/ti/gate.c
@@ -0,0 +1,245 @@
+/*
+ * OMAP gate clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk);
+
+static const struct clk_ops omap_gate_clkdm_clk_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap2_clkops_enable_clkdm,
+	.disable	= &omap2_clkops_disable_clkdm,
+};
+
+static const struct clk_ops omap_gate_clk_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap2_dflt_clk_enable,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap36xx_gate_clk_enable_with_hsdiv_restore,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+/**
+ * omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering
+ *         from HSDivider PWRDN problem Implements Errata ID: i556.
+ * @clk: DPLL output struct clk
+ *
+ * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
+ * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
+ * valueafter their respective PWRDN bits are set.  Any dummy write
+ * (Any other value different from the Read value) to the
+ * corresponding CM_CLKSEL register will refresh the dividers.
+ */
+static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
+{
+	struct clk_divider *parent;
+	struct clk_hw *parent_hw;
+	u32 dummy_v, orig_v;
+	int ret;
+
+	/* Clear PWRDN bit of HSDIVIDER */
+	ret = omap2_dflt_clk_enable(clk);
+
+	/* Parent is the x2 node, get parent of parent for the m2 div */
+	parent_hw = __clk_get_hw(__clk_get_parent(__clk_get_parent(clk->clk)));
+	parent = to_clk_divider(parent_hw);
+
+	/* Restore the dividers */
+	if (!ret) {
+		orig_v = ti_clk_ll_ops->clk_readl(parent->reg);
+		dummy_v = orig_v;
+
+		/* Write any other value different from the Read value */
+		dummy_v ^= (1 << parent->shift);
+		ti_clk_ll_ops->clk_writel(dummy_v, parent->reg);
+
+		/* Write the original divider */
+		ti_clk_ll_ops->clk_writel(orig_v, parent->reg);
+	}
+
+	return ret;
+}
+
+static void __init _of_ti_gate_clk_setup(struct device_node *node,
+					 const struct clk_ops *ops,
+					 const struct clk_hw_omap_ops *hw_ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	u32 val;
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return;
+
+	clk_hw->hw.init = &init;
+
+	init.name = clk_name;
+	init.ops = ops;
+
+	if (ops != &omap_gate_clkdm_clk_ops) {
+		clk_hw->enable_reg = ti_clk_get_reg_addr(node, 0);
+		if (!clk_hw->enable_reg)
+			return;
+
+		if (!of_property_read_u32(node, "ti,bit-shift", &val))
+			clk_hw->enable_bit = val;
+	}
+
+	clk_hw->ops = hw_ops;
+
+	clk_hw->flags = MEMMAP_ADDRESSING;
+
+	if (of_clk_get_parent_count(node) != 1) {
+		pr_err("%s must have 1 parent\n", clk_name);
+		return;
+	}
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		init.flags |= CLK_SET_RATE_PARENT;
+
+	if (of_property_read_bool(node, "ti,set-bit-to-disable"))
+		clk_hw->flags |= INVERT_ENABLE;
+
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return;
+	}
+
+	kfree(clk_hw);
+}
+
+static void __init
+_of_ti_composite_gate_clk_setup(struct device_node *node,
+				const struct clk_hw_omap_ops *hw_ops)
+{
+	struct clk_hw_omap *gate;
+	u32 val = 0;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return;
+
+	gate->enable_reg = ti_clk_get_reg_addr(node, 0);
+	if (!gate->enable_reg)
+		return;
+
+	of_property_read_u32(node, "ti,bit-shift", &val);
+
+	gate->enable_bit = val;
+	gate->ops = hw_ops;
+	gate->flags = MEMMAP_ADDRESSING;
+
+	if (!ti_clk_add_component(node, &gate->hw, CLK_COMPONENT_TYPE_GATE))
+		return;
+
+	kfree(gate);
+}
+
+static void __init
+of_ti_composite_no_wait_gate_clk_setup(struct device_node *node)
+{
+	_of_ti_composite_gate_clk_setup(node, NULL);
+}
+CLK_OF_DECLARE(ti_composite_no_wait_gate_clk, "ti,composite-no-wait-gate-clock",
+	       of_ti_composite_no_wait_gate_clk_setup);
+
+static void __init of_ti_composite_interface_clk_setup(struct device_node *node)
+{
+	_of_ti_composite_gate_clk_setup(node, &clkhwops_iclk_wait);
+}
+CLK_OF_DECLARE(ti_composite_interface_clk, "ti,composite-interface-clock",
+	       of_ti_composite_interface_clk_setup);
+
+static void __init of_ti_composite_gate_clk_setup(struct device_node *node)
+{
+	_of_ti_composite_gate_clk_setup(node, &clkhwops_wait);
+}
+CLK_OF_DECLARE(ti_composite_gate_clk, "ti,composite-gate-clock",
+	       of_ti_composite_gate_clk_setup);
+
+
+static void __init of_ti_clkdm_gate_clk_setup(struct device_node *node)
+{
+	_of_ti_gate_clk_setup(node, &omap_gate_clkdm_clk_ops, NULL);
+}
+CLK_OF_DECLARE(ti_clkdm_gate_clk, "ti,clkdm-gate-clock",
+	       of_ti_clkdm_gate_clk_setup);
+
+static void __init of_ti_hsdiv_gate_clk_setup(struct device_node *node)
+{
+	_of_ti_gate_clk_setup(node, &omap_gate_clk_hsdiv_restore_ops,
+			      &clkhwops_wait);
+}
+CLK_OF_DECLARE(ti_hsdiv_gate_clk, "ti,hsdiv-gate-clock",
+	       of_ti_hsdiv_gate_clk_setup);
+
+static void __init of_ti_gate_clk_setup(struct device_node *node)
+{
+	_of_ti_gate_clk_setup(node, &omap_gate_clk_ops, NULL);
+}
+CLK_OF_DECLARE(ti_gate_clk, "ti,gate-clock", of_ti_gate_clk_setup)
+
+static void __init of_ti_wait_gate_clk_setup(struct device_node *node)
+{
+	_of_ti_gate_clk_setup(node, &omap_gate_clk_ops, &clkhwops_wait);
+}
+CLK_OF_DECLARE(ti_wait_gate_clk, "ti,wait-gate-clock",
+	       of_ti_wait_gate_clk_setup);
+
+#ifdef CONFIG_ARCH_OMAP3
+static void __init of_ti_am35xx_gate_clk_setup(struct device_node *node)
+{
+	_of_ti_gate_clk_setup(node, &omap_gate_clk_ops,
+			      &clkhwops_am35xx_ipss_module_wait);
+}
+CLK_OF_DECLARE(ti_am35xx_gate_clk, "ti,am35xx-gate-clock",
+	       of_ti_am35xx_gate_clk_setup);
+
+static void __init of_ti_dss_gate_clk_setup(struct device_node *node)
+{
+	_of_ti_gate_clk_setup(node, &omap_gate_clk_ops,
+			      &clkhwops_omap3430es2_dss_usbhost_wait);
+}
+CLK_OF_DECLARE(ti_dss_gate_clk, "ti,dss-gate-clock",
+	       of_ti_dss_gate_clk_setup);
+#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index e1b504c..a52495d 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -227,6 +227,8 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 void omap2_init_clk_clkdm(struct clk_hw *clk);
 unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -251,5 +253,9 @@ static inline void of_ti_clk_deny_autoidle_all(void) { }
 
 extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
 extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 
 #endif
-- 
1.7.9.5

[PATCHv11 18/49] CLK: TI: add support for clockdomain binding

[Tero Kristo]

Some OMAP clocks require knowledge about their parent clockdomain for
book keeping purposes. This patch creates a new DT binding for TI
clockdomains, which act as a collection of device clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/clockdomain.txt   |   24 +++++++
 drivers/clk/ti/Makefile                            |    3 +-
 drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    1 +
 4 files changed, 97 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
 create mode 100644 drivers/clk/ti/clockdomain.c

diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
new file mode 100644
index 0000000..cb76b3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -0,0 +1,24 @@
+Binding for Texas Instruments clockdomain.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1] in consumer role.
+Every clock on TI SoC belongs to one clockdomain, but software
+only needs this information for specific clocks which require
+their parent clockdomain to be controlled when the clock is
+enabled/disabled. This binding doesn't define a new clock
+binding type, it is used to group existing clock nodes under
+hardware hierarchy.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,clockdomain"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of clocks within this domain
+
+Examples:
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+	};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 7cba389..67056fb 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,5 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
-					   fixed-factor.o gate.o composite.o
+					   fixed-factor.o gate.o clockdomain.o \
+					   composite.o
 endif
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
new file mode 100644
index 0000000..f1e0038
--- /dev/null
+++ b/drivers/clk/ti/clockdomain.c
@@ -0,0 +1,70 @@
+/*
+ * OMAP clockdomain support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static void __init of_ti_clockdomain_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_hw *clk_hw;
+	const char *clkdm_name = node->name;
+	int i;
+	int num_clks;
+
+	num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
+
+	for (i = 0; i < num_clks; i++) {
+		clk = of_clk_get(node, i);
+		if (__clk_get_flags(clk) & CLK_IS_BASIC) {
+			pr_warn("can't setup clkdm for basic clk %s\n",
+				__clk_get_name(clk));
+			continue;
+		}
+		clk_hw = __clk_get_hw(clk);
+		to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
+		omap2_init_clk_clkdm(clk_hw);
+	}
+}
+
+static struct of_device_id ti_clkdm_match_table[] __initdata = {
+	{ .compatible = "ti,clockdomain" },
+	{ }
+};
+
+/**
+ * ti_dt_clockdomains_setup - setup device tree clockdomains
+ *
+ * Initializes clockdomain nodes for a SoC. This parses through all the
+ * nodes with compatible = "ti,clockdomain", and add the clockdomain
+ * info for all the clocks listed under these. This function shall be
+ * called after rest of the DT clock init has completed and all
+ * clock nodes have been registered.
+ */
+void __init ti_dt_clockdomains_setup(void)
+{
+	struct device_node *np;
+	for_each_matching_node(np, ti_clkdm_match_table) {
+		of_ti_clockdomain_setup(np);
+	}
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index a52495d..e8c1b22 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -238,6 +238,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
+void ti_dt_clockdomains_setup(void);
 void ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
 		       ti_of_clk_init_cb_t func);
 int of_ti_clk_autoidle_setup(struct device_node *node);
-- 
1.7.9.5

Re: [PATCHv11 18/49] CLK: TI: add support for clockdomain binding

[Paul Walmsley]

On Thu, 19 Dec 2013, Tero Kristo wrote:

> Some OMAP clocks require knowledge about their parent clockdomain for
> book keeping purposes. This patch creates a new DT binding for TI
> clockdomains, which act as a collection of device clocks.

At least on OMAP4 and 5, clockdomains can be either collections of clocks 
or collections of IP blocks.  In other words, "clockdomain" was a horrible 
name: it's really an "idle-domain" or something similar to that.
Benoit might recall the details.  So you might want to add comments to 
that effect so folks don't get the wrong idea that they are specific to 
clocks on all OMAPs.

The clockdomain handling isn't ideal - I guess it should probably be part 
of the low-level PRM/CM IP block drivers that are currently in 
arch/arm/mach-omap2/* - but I think we can move it there later, unless you 
see a problem with that.

Also I guess there's no need for clockdomain compatible strings any more, 
since those can just be registered by iterating through the "clockdomains 
{" node children.  But I guess we can move that later too.

- Paul

> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  .../devicetree/bindings/clock/ti/clockdomain.txt   |   24 +++++++
>  drivers/clk/ti/Makefile                            |    3 +-
>  drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
>  include/linux/clk/ti.h                             |    1 +
>  4 files changed, 97 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
>  create mode 100644 drivers/clk/ti/clockdomain.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> new file mode 100644
> index 0000000..cb76b3f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
> @@ -0,0 +1,24 @@
> +Binding for Texas Instruments clockdomain.
> +
> +Binding status: Unstable - ABI compatibility may be broken in the future
> +
> +This binding uses the common clock binding[1] in consumer role.
> +Every clock on TI SoC belongs to one clockdomain, but software
> +only needs this information for specific clocks which require
> +their parent clockdomain to be controlled when the clock is
> +enabled/disabled. This binding doesn't define a new clock
> +binding type, it is used to group existing clock nodes under
> +hardware hierarchy.
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible : shall be "ti,clockdomain"
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clocks : link phandles of clocks within this domain
> +
> +Examples:
> +	dss_clkdm: dss_clkdm {
> +		compatible = "ti,clockdomain";
> +		clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
> +	};
> diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
> index 7cba389..67056fb 100644
> --- a/drivers/clk/ti/Makefile
> +++ b/drivers/clk/ti/Makefile
> @@ -1,4 +1,5 @@
>  ifneq ($(CONFIG_OF),)
>  obj-y					+= clk.o dpll.o autoidle.o divider.o \
> -					   fixed-factor.o gate.o composite.o
> +					   fixed-factor.o gate.o clockdomain.o \
> +					   composite.o
>  endif
> diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
> new file mode 100644
> index 0000000..f1e0038
> --- /dev/null
> +++ b/drivers/clk/ti/clockdomain.c
> @@ -0,0 +1,70 @@
> +/*
> + * OMAP clockdomain support
> + *
> + * Copyright (C) 2013 Texas Instruments, Inc.
> + *
> + * Tero Kristo <t-kristo@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/clk/ti.h>
> +
> +#undef pr_fmt
> +#define pr_fmt(fmt) "%s: " fmt, __func__
> +
> +static void __init of_ti_clockdomain_setup(struct device_node *node)
> +{
> +	struct clk *clk;
> +	struct clk_hw *clk_hw;
> +	const char *clkdm_name = node->name;
> +	int i;
> +	int num_clks;
> +
> +	num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
> +
> +	for (i = 0; i < num_clks; i++) {
> +		clk = of_clk_get(node, i);
> +		if (__clk_get_flags(clk) & CLK_IS_BASIC) {
> +			pr_warn("can't setup clkdm for basic clk %s\n",
> +				__clk_get_name(clk));
> +			continue;
> +		}
> +		clk_hw = __clk_get_hw(clk);
> +		to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
> +		omap2_init_clk_clkdm(clk_hw);
> +	}
> +}
> +
> +static struct of_device_id ti_clkdm_match_table[] __initdata = {
> +	{ .compatible = "ti,clockdomain" },
> +	{ }
> +};
> +
> +/**
> + * ti_dt_clockdomains_setup - setup device tree clockdomains
> + *
> + * Initializes clockdomain nodes for a SoC. This parses through all the
> + * nodes with compatible = "ti,clockdomain", and add the clockdomain
> + * info for all the clocks listed under these. This function shall be
> + * called after rest of the DT clock init has completed and all
> + * clock nodes have been registered.
> + */
> +void __init ti_dt_clockdomains_setup(void)
> +{
> +	struct device_node *np;
> +	for_each_matching_node(np, ti_clkdm_match_table) {
> +		of_ti_clockdomain_setup(np);
> +	}
> +}
> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
> index a52495d..e8c1b22 100644
> --- a/include/linux/clk/ti.h
> +++ b/include/linux/clk/ti.h
> @@ -238,6 +238,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
>  void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
>  void ti_dt_clocks_register(struct ti_dt_clk *oclks);
>  void ti_dt_clk_init_provider(struct device_node *np, int index);
> +void ti_dt_clockdomains_setup(void);
>  void ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
>  		       ti_of_clk_init_cb_t func);
>  int of_ti_clk_autoidle_setup(struct device_node *node);
> -- 
> 1.7.9.5
> 


- Paul

[PATCHv11 19/49] clk: ti: add support for basic mux clock

[Tero Kristo]

ti,mux-clock provides now a binding for basic mux support. This is just
using the basic clock type.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 Documentation/devicetree/bindings/clock/ti/mux.txt |   76 +++++++++++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/mux.c                               |  137 ++++++++++++++++++++
 3 files changed, 214 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/mux.txt
 create mode 100644 drivers/clk/ti/mux.c

diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
new file mode 100644
index 0000000..2d0d170
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -0,0 +1,76 @@
+Binding for TI mux clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped multiplexer with multiple input clock signals or
+parents, one of which can be selected as output.  This clock does not
+gate or adjust the parent rate via a divider or multiplier.
+
+By default the "clocks" property lists the parents in the same order
+as they are programmed into the regster.  E.g:
+
+	clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
+
+results in programming the register as follows:
+
+register value		selected parent clock
+0			foo_clock
+1			bar_clock
+2			baz_clock
+
+Some clock controller IPs do not allow a value of zero to be programmed
+into the register, instead indexing begins at 1.  The optional property
+"index-starts-at-one" modified the scheme as follows:
+
+register value		selected clock parent
+1			foo_clock
+2			bar_clock
+3			baz_clock
+
+The binding must provide the register to control the mux. Optionally
+the number of bits to shift the control field in the register can be
+supplied. If the shift value is missing it is the same as supplying
+a zero shift.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks
+- reg : register offset for register controlling adjustable mux
+
+Optional properties:
+- ti,bit-shift : number of bits to shift the bit-mask, defaults to
+  0 if not present
+- ti,index-starts-at-one : valid input select programming starts at 1, not
+  zero
+- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
+  not supported by the composite-mux-clock subtype
+
+Examples:
+
+sys_clkin_ck: sys_clkin_ck@4a306110 {
+	#clock-cells = <0>;
+	compatible = "ti,mux-clock";
+	clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+	reg = <0x0110>;
+	ti,index-starts-at-one;
+};
+
+abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 {
+	#clock-cells = <0>;
+	compatible = "ti,mux-clock";
+	clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+	ti,bit-shift = <24>;
+	reg = <0x0108>;
+};
+
+mcbsp5_mux_fck: mcbsp5_mux_fck {
+	#clock-cells = <0>;
+	compatible = "ti,composite-mux-clock";
+	clocks = <&core_96m_fck>, <&mcbsp_clks>;
+	ti,bit-shift = <4>;
+	reg = <0x02d8>;
+};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 67056fb..ef61d39 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,5 +1,5 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
-					   composite.o
+					   composite.o mux.o
 endif
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
new file mode 100644
index 0000000..8d0d18a
--- /dev/null
+++ b/drivers/clk/ti/mux.c
@@ -0,0 +1,137 @@
+/*
+ * TI Multiplexer Clock
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+/**
+ * of_mux_clk_setup - Setup function for simple mux rate clock
+ * @node: DT node for the clock
+ *
+ * Sets up a basic clock multiplexer.
+ */
+static void of_mux_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char **parent_names;
+	int i;
+	struct clk_mux_desc *desc;
+	u32 val;
+
+	desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+	if (!desc)
+		return;
+
+	desc->desc.num_parents = of_clk_get_parent_count(node);
+	if (desc->desc.num_parents < 2) {
+		pr_err("mux-clock %s must have parents\n", node->name);
+		goto cleanup;
+	}
+	parent_names = kzalloc((sizeof(char *) * desc->desc.num_parents),
+			       GFP_KERNEL);
+	if (!parent_names)
+		goto cleanup;
+
+	for (i = 0; i < desc->desc.num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	desc->desc.parent_names = parent_names;
+	desc->desc.name = node->name;
+	desc->desc.register_func = clk_register_mux_desc;
+
+	desc->reg = ti_clk_get_reg_addr(node, 0);
+
+	if (!desc->reg)
+		goto cleanup;
+
+	desc->ll_ops = ti_clk_ll_ops;
+
+	if (!of_property_read_u32(node, "ti,bit-shift", &val))
+		desc->shift = val;
+
+	if (of_property_read_bool(node, "ti,index-starts-at-one"))
+		desc->flags |= CLK_MUX_INDEX_ONE;
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		desc->desc.flags |= CLK_SET_RATE_PARENT;
+
+	/* Generate bit-mask based on parent info */
+	desc->mask = desc->desc.num_parents;
+	if (!(desc->flags & CLK_MUX_INDEX_ONE))
+		desc->mask--;
+
+	desc->mask = (1 << fls(desc->mask)) - 1;
+
+	clk = clk_register_desc(NULL, &desc->desc);
+
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+cleanup:
+	kfree(desc->desc.parent_names);
+	kfree(desc);
+}
+CLK_OF_DECLARE(mux_clk, "ti,mux-clock", of_mux_clk_setup);
+
+static void __init of_ti_composite_mux_clk_setup(struct device_node *node)
+{
+	struct clk_mux *mux;
+	int num_parents;
+	u32 val;
+
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return;
+
+	mux->reg = ti_clk_get_reg_addr(node, 0);
+
+	if (!mux->reg)
+		goto cleanup;
+
+	mux->ll_ops = ti_clk_ll_ops;
+
+	if (!of_property_read_u32(node, "ti,bit-shift", &val))
+		mux->shift = val;
+
+	if (of_property_read_bool(node, "ti,index-starts-at-one"))
+		mux->flags |= CLK_MUX_INDEX_ONE;
+
+	num_parents = of_clk_get_parent_count(node);
+
+	if (num_parents < 2) {
+		pr_err("%s must have parents\n", node->name);
+		goto cleanup;
+	}
+
+	mux->mask = num_parents - 1;
+	mux->mask = (1 << fls(mux->mask)) - 1;
+
+	if (!ti_clk_add_component(node, &mux->hw, CLK_COMPONENT_TYPE_MUX))
+		return;
+
+cleanup:
+	kfree(mux);
+}
+CLK_OF_DECLARE(ti_composite_mux_clk_setup, "ti,composite-mux-clock",
+	       of_ti_composite_mux_clk_setup);
-- 
1.7.9.5

[PATCHv11 20/49] CLK: TI: add omap4 clock init file

[Tero Kristo]

clk-44xx.c now contains the clock init functionality for omap4, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock.h |    1 -
 drivers/clk/ti/Makefile     |    1 +
 drivers/clk/ti/clk-44xx.c   |  328 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h      |    3 +
 4 files changed, 332 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ti/clk-44xx.c

diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 6bd72b5..b83fca6 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -247,7 +247,6 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
 				void __iomem **idlest_reg,
 				u8 *idlest_bit, u8 *idlest_val);
 int omap2_clk_enable_autoidle_all(void);
-int omap2_clk_disable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
 int omap2_clk_deny_idle(struct clk *clk);
 void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index ef61d39..381f1f8 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -2,4 +2,5 @@ ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o
+obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 endif
diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
new file mode 100644
index 0000000..3e2090b
--- /dev/null
+++ b/drivers/clk/ti/clk-44xx.c
@@ -0,0 +1,316 @@
+/*
+ * OMAP4 Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo (t-kristo@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+/*
+ * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
+ * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
+ * must be set to 196.608 MHz" and hence, the DPLL locked frequency is
+ * half of this value.
+ */
+#define OMAP4_DPLL_ABE_DEFFREQ				98304000
+
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ				960000000
+
+static struct ti_dt_clk omap44xx_clks[] = {
+	DT_CLK(NULL, "extalt_clkin_ck", "extalt_clkin_ck"),
+	DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"),
+	DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"),
+	DT_CLK(NULL, "pad_slimbus_core_clks_ck", "pad_slimbus_core_clks_ck"),
+	DT_CLK(NULL, "secure_32k_clk_src_ck", "secure_32k_clk_src_ck"),
+	DT_CLK(NULL, "slimbus_src_clk", "slimbus_src_clk"),
+	DT_CLK(NULL, "slimbus_clk", "slimbus_clk"),
+	DT_CLK(NULL, "sys_32k_ck", "sys_32k_ck"),
+	DT_CLK(NULL, "virt_12000000_ck", "virt_12000000_ck"),
+	DT_CLK(NULL, "virt_13000000_ck", "virt_13000000_ck"),
+	DT_CLK(NULL, "virt_16800000_ck", "virt_16800000_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_27000000_ck", "virt_27000000_ck"),
+	DT_CLK(NULL, "virt_38400000_ck", "virt_38400000_ck"),
+	DT_CLK(NULL, "sys_clkin_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "tie_low_clock_ck", "tie_low_clock_ck"),
+	DT_CLK(NULL, "utmi_phy_clkout_ck", "utmi_phy_clkout_ck"),
+	DT_CLK(NULL, "xclk60mhsp1_ck", "xclk60mhsp1_ck"),
+	DT_CLK(NULL, "xclk60mhsp2_ck", "xclk60mhsp2_ck"),
+	DT_CLK(NULL, "xclk60motg_ck", "xclk60motg_ck"),
+	DT_CLK(NULL, "abe_dpll_bypass_clk_mux_ck", "abe_dpll_bypass_clk_mux_ck"),
+	DT_CLK(NULL, "abe_dpll_refclk_mux_ck", "abe_dpll_refclk_mux_ck"),
+	DT_CLK(NULL, "dpll_abe_ck", "dpll_abe_ck"),
+	DT_CLK(NULL, "dpll_abe_x2_ck", "dpll_abe_x2_ck"),
+	DT_CLK(NULL, "dpll_abe_m2x2_ck", "dpll_abe_m2x2_ck"),
+	DT_CLK(NULL, "abe_24m_fclk", "abe_24m_fclk"),
+	DT_CLK(NULL, "abe_clk", "abe_clk"),
+	DT_CLK(NULL, "aess_fclk", "aess_fclk"),
+	DT_CLK(NULL, "dpll_abe_m3x2_ck", "dpll_abe_m3x2_ck"),
+	DT_CLK(NULL, "core_hsd_byp_clk_mux_ck", "core_hsd_byp_clk_mux_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_m6x2_ck", "dpll_core_m6x2_ck"),
+	DT_CLK(NULL, "dbgclk_mux_ck", "dbgclk_mux_ck"),
+	DT_CLK(NULL, "dpll_core_m2_ck", "dpll_core_m2_ck"),
+	DT_CLK(NULL, "ddrphy_ck", "ddrphy_ck"),
+	DT_CLK(NULL, "dpll_core_m5x2_ck", "dpll_core_m5x2_ck"),
+	DT_CLK(NULL, "div_core_ck", "div_core_ck"),
+	DT_CLK(NULL, "div_iva_hs_clk", "div_iva_hs_clk"),
+	DT_CLK(NULL, "div_mpu_hs_clk", "div_mpu_hs_clk"),
+	DT_CLK(NULL, "dpll_core_m4x2_ck", "dpll_core_m4x2_ck"),
+	DT_CLK(NULL, "dll_clk_div_ck", "dll_clk_div_ck"),
+	DT_CLK(NULL, "dpll_abe_m2_ck", "dpll_abe_m2_ck"),
+	DT_CLK(NULL, "dpll_core_m3x2_ck", "dpll_core_m3x2_ck"),
+	DT_CLK(NULL, "dpll_core_m7x2_ck", "dpll_core_m7x2_ck"),
+	DT_CLK(NULL, "iva_hsd_byp_clk_mux_ck", "iva_hsd_byp_clk_mux_ck"),
+	DT_CLK(NULL, "dpll_iva_ck", "dpll_iva_ck"),
+	DT_CLK(NULL, "dpll_iva_x2_ck", "dpll_iva_x2_ck"),
+	DT_CLK(NULL, "dpll_iva_m4x2_ck", "dpll_iva_m4x2_ck"),
+	DT_CLK(NULL, "dpll_iva_m5x2_ck", "dpll_iva_m5x2_ck"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "per_hs_clk_div_ck", "per_hs_clk_div_ck"),
+	DT_CLK(NULL, "per_hsd_byp_clk_mux_ck", "per_hsd_byp_clk_mux_ck"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_x2_ck", "dpll_per_x2_ck"),
+	DT_CLK(NULL, "dpll_per_m2x2_ck", "dpll_per_m2x2_ck"),
+	DT_CLK(NULL, "dpll_per_m3x2_ck", "dpll_per_m3x2_ck"),
+	DT_CLK(NULL, "dpll_per_m4x2_ck", "dpll_per_m4x2_ck"),
+	DT_CLK(NULL, "dpll_per_m5x2_ck", "dpll_per_m5x2_ck"),
+	DT_CLK(NULL, "dpll_per_m6x2_ck", "dpll_per_m6x2_ck"),
+	DT_CLK(NULL, "dpll_per_m7x2_ck", "dpll_per_m7x2_ck"),
+	DT_CLK(NULL, "usb_hs_clk_div_ck", "usb_hs_clk_div_ck"),
+	DT_CLK(NULL, "dpll_usb_ck", "dpll_usb_ck"),
+	DT_CLK(NULL, "dpll_usb_clkdcoldo_ck", "dpll_usb_clkdcoldo_ck"),
+	DT_CLK(NULL, "dpll_usb_m2_ck", "dpll_usb_m2_ck"),
+	DT_CLK(NULL, "ducati_clk_mux_ck", "ducati_clk_mux_ck"),
+	DT_CLK(NULL, "func_12m_fclk", "func_12m_fclk"),
+	DT_CLK(NULL, "func_24m_clk", "func_24m_clk"),
+	DT_CLK(NULL, "func_24mc_fclk", "func_24mc_fclk"),
+	DT_CLK(NULL, "func_48m_fclk", "func_48m_fclk"),
+	DT_CLK(NULL, "func_48mc_fclk", "func_48mc_fclk"),
+	DT_CLK(NULL, "func_64m_fclk", "func_64m_fclk"),
+	DT_CLK(NULL, "func_96m_fclk", "func_96m_fclk"),
+	DT_CLK(NULL, "init_60m_fclk", "init_60m_fclk"),
+	DT_CLK(NULL, "l3_div_ck", "l3_div_ck"),
+	DT_CLK(NULL, "l4_div_ck", "l4_div_ck"),
+	DT_CLK(NULL, "lp_clk_div_ck", "lp_clk_div_ck"),
+	DT_CLK(NULL, "l4_wkup_clk_mux_ck", "l4_wkup_clk_mux_ck"),
+	DT_CLK("smp_twd", NULL, "mpu_periphclk"),
+	DT_CLK(NULL, "ocp_abe_iclk", "ocp_abe_iclk"),
+	DT_CLK(NULL, "per_abe_24m_fclk", "per_abe_24m_fclk"),
+	DT_CLK(NULL, "per_abe_nc_fclk", "per_abe_nc_fclk"),
+	DT_CLK(NULL, "syc_clk_div_ck", "syc_clk_div_ck"),
+	DT_CLK(NULL, "aes1_fck", "aes1_fck"),
+	DT_CLK(NULL, "aes2_fck", "aes2_fck"),
+	DT_CLK(NULL, "dmic_sync_mux_ck", "dmic_sync_mux_ck"),
+	DT_CLK(NULL, "func_dmic_abe_gfclk", "func_dmic_abe_gfclk"),
+	DT_CLK(NULL, "dss_sys_clk", "dss_sys_clk"),
+	DT_CLK(NULL, "dss_tv_clk", "dss_tv_clk"),
+	DT_CLK(NULL, "dss_dss_clk", "dss_dss_clk"),
+	DT_CLK(NULL, "dss_48mhz_clk", "dss_48mhz_clk"),
+	DT_CLK(NULL, "dss_fck", "dss_fck"),
+	DT_CLK("omapdss_dss", "ick", "dss_fck"),
+	DT_CLK(NULL, "fdif_fck", "fdif_fck"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "gpio6_dbclk", "gpio6_dbclk"),
+	DT_CLK(NULL, "sgx_clk_mux", "sgx_clk_mux"),
+	DT_CLK(NULL, "hsi_fck", "hsi_fck"),
+	DT_CLK(NULL, "iss_ctrlclk", "iss_ctrlclk"),
+	DT_CLK(NULL, "mcasp_sync_mux_ck", "mcasp_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcasp_abe_gfclk", "func_mcasp_abe_gfclk"),
+	DT_CLK(NULL, "mcbsp1_sync_mux_ck", "mcbsp1_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcbsp1_gfclk", "func_mcbsp1_gfclk"),
+	DT_CLK(NULL, "mcbsp2_sync_mux_ck", "mcbsp2_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcbsp2_gfclk", "func_mcbsp2_gfclk"),
+	DT_CLK(NULL, "mcbsp3_sync_mux_ck", "mcbsp3_sync_mux_ck"),
+	DT_CLK(NULL, "func_mcbsp3_gfclk", "func_mcbsp3_gfclk"),
+	DT_CLK(NULL, "mcbsp4_sync_mux_ck", "mcbsp4_sync_mux_ck"),
+	DT_CLK(NULL, "per_mcbsp4_gfclk", "per_mcbsp4_gfclk"),
+	DT_CLK(NULL, "hsmmc1_fclk", "hsmmc1_fclk"),
+	DT_CLK(NULL, "hsmmc2_fclk", "hsmmc2_fclk"),
+	DT_CLK(NULL, "ocp2scp_usb_phy_phy_48m", "ocp2scp_usb_phy_phy_48m"),
+	DT_CLK(NULL, "sha2md5_fck", "sha2md5_fck"),
+	DT_CLK(NULL, "slimbus1_fclk_1", "slimbus1_fclk_1"),
+	DT_CLK(NULL, "slimbus1_fclk_0", "slimbus1_fclk_0"),
+	DT_CLK(NULL, "slimbus1_fclk_2", "slimbus1_fclk_2"),
+	DT_CLK(NULL, "slimbus1_slimbus_clk", "slimbus1_slimbus_clk"),
+	DT_CLK(NULL, "slimbus2_fclk_1", "slimbus2_fclk_1"),
+	DT_CLK(NULL, "slimbus2_fclk_0", "slimbus2_fclk_0"),
+	DT_CLK(NULL, "slimbus2_slimbus_clk", "slimbus2_slimbus_clk"),
+	DT_CLK(NULL, "smartreflex_core_fck", "smartreflex_core_fck"),
+	DT_CLK(NULL, "smartreflex_iva_fck", "smartreflex_iva_fck"),
+	DT_CLK(NULL, "smartreflex_mpu_fck", "smartreflex_mpu_fck"),
+	DT_CLK(NULL, "dmt1_clk_mux", "dmt1_clk_mux"),
+	DT_CLK(NULL, "cm2_dm10_mux", "cm2_dm10_mux"),
+	DT_CLK(NULL, "cm2_dm11_mux", "cm2_dm11_mux"),
+	DT_CLK(NULL, "cm2_dm2_mux", "cm2_dm2_mux"),
+	DT_CLK(NULL, "cm2_dm3_mux", "cm2_dm3_mux"),
+	DT_CLK(NULL, "cm2_dm4_mux", "cm2_dm4_mux"),
+	DT_CLK(NULL, "timer5_sync_mux", "timer5_sync_mux"),
+	DT_CLK(NULL, "timer6_sync_mux", "timer6_sync_mux"),
+	DT_CLK(NULL, "timer7_sync_mux", "timer7_sync_mux"),
+	DT_CLK(NULL, "timer8_sync_mux", "timer8_sync_mux"),
+	DT_CLK(NULL, "cm2_dm9_mux", "cm2_dm9_mux"),
+	DT_CLK(NULL, "usb_host_fs_fck", "usb_host_fs_fck"),
+	DT_CLK("usbhs_omap", "fs_fck", "usb_host_fs_fck"),
+	DT_CLK(NULL, "utmi_p1_gfclk", "utmi_p1_gfclk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "usb_host_hs_utmi_p1_clk"),
+	DT_CLK(NULL, "utmi_p2_gfclk", "utmi_p2_gfclk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "usb_host_hs_utmi_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "usb_host_hs_utmi_p3_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "usb_host_hs_hsic480m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "usb_host_hs_hsic60m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "usb_host_hs_hsic60m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "usb_host_hs_hsic480m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_func48mclk", "usb_host_hs_func48mclk"),
+	DT_CLK(NULL, "usb_host_hs_fck", "usb_host_hs_fck"),
+	DT_CLK("usbhs_omap", "hs_fck", "usb_host_hs_fck"),
+	DT_CLK(NULL, "otg_60m_gfclk", "otg_60m_gfclk"),
+	DT_CLK(NULL, "usb_otg_hs_xclk", "usb_otg_hs_xclk"),
+	DT_CLK(NULL, "usb_otg_hs_ick", "usb_otg_hs_ick"),
+	DT_CLK("musb-omap2430", "ick", "usb_otg_hs_ick"),
+	DT_CLK(NULL, "usb_phy_cm_clk32k", "usb_phy_cm_clk32k"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "usb_tll_hs_usb_ch2_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "usb_tll_hs_usb_ch0_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "usb_tll_hs_usb_ch1_clk"),
+	DT_CLK(NULL, "usb_tll_hs_ick", "usb_tll_hs_ick"),
+	DT_CLK("usbhs_omap", "usbtll_ick", "usb_tll_hs_ick"),
+	DT_CLK("usbhs_tll", "usbtll_ick", "usb_tll_hs_ick"),
+	DT_CLK(NULL, "usim_ck", "usim_ck"),
+	DT_CLK(NULL, "usim_fclk", "usim_fclk"),
+	DT_CLK(NULL, "pmd_stm_clock_mux_ck", "pmd_stm_clock_mux_ck"),
+	DT_CLK(NULL, "pmd_trace_clk_mux_ck", "pmd_trace_clk_mux_ck"),
+	DT_CLK(NULL, "stm_clk_div_ck", "stm_clk_div_ck"),
+	DT_CLK(NULL, "trace_clk_div_ck", "trace_clk_div_ck"),
+	DT_CLK(NULL, "auxclk0_src_ck", "auxclk0_src_ck"),
+	DT_CLK(NULL, "auxclk0_ck", "auxclk0_ck"),
+	DT_CLK(NULL, "auxclkreq0_ck", "auxclkreq0_ck"),
+	DT_CLK(NULL, "auxclk1_src_ck", "auxclk1_src_ck"),
+	DT_CLK(NULL, "auxclk1_ck", "auxclk1_ck"),
+	DT_CLK(NULL, "auxclkreq1_ck", "auxclkreq1_ck"),
+	DT_CLK(NULL, "auxclk2_src_ck", "auxclk2_src_ck"),
+	DT_CLK(NULL, "auxclk2_ck", "auxclk2_ck"),
+	DT_CLK(NULL, "auxclkreq2_ck", "auxclkreq2_ck"),
+	DT_CLK(NULL, "auxclk3_src_ck", "auxclk3_src_ck"),
+	DT_CLK(NULL, "auxclk3_ck", "auxclk3_ck"),
+	DT_CLK(NULL, "auxclkreq3_ck", "auxclkreq3_ck"),
+	DT_CLK(NULL, "auxclk4_src_ck", "auxclk4_src_ck"),
+	DT_CLK(NULL, "auxclk4_ck", "auxclk4_ck"),
+	DT_CLK(NULL, "auxclkreq4_ck", "auxclkreq4_ck"),
+	DT_CLK(NULL, "auxclk5_src_ck", "auxclk5_src_ck"),
+	DT_CLK(NULL, "auxclk5_ck", "auxclk5_ck"),
+	DT_CLK(NULL, "auxclkreq5_ck", "auxclkreq5_ck"),
+	DT_CLK("50000000.gpmc", "fck", "dummy_ck"),
+	DT_CLK("omap_i2c.1", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.2", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.3", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "mailboxes_ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.0", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.1", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.2", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.3", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.4", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.1", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.2", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.3", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.4", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.1", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.2", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.3", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "uart1_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart2_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart3_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart4_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbhost_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbtll_fck", "dummy_ck"),
+	DT_CLK("usbhs_tll", "usbtll_fck", "dummy_ck"),
+	DT_CLK("omap_wdt", "ick", "dummy_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
+	DT_CLK("omap_timer.1", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.2", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.3", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.4", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.9", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.10", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.11", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("omap_timer.5", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("omap_timer.6", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("omap_timer.7", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("omap_timer.8", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4a318000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48032000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48034000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48036000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("4803e000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48086000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("48088000.timer", "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK("40138000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4013a000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4013c000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK("4013e000.timer", "timer_sys_ck", "syc_clk_div_ck"),
+	DT_CLK(NULL, "cpufreq_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "bandgap_fclk", "bandgap_fclk"),
+	DT_CLK(NULL, "div_ts_ck", "div_ts_ck"),
+	DT_CLK(NULL, "bandgap_ts_fclk", "bandgap_ts_fclk"),
+	{ .node_name = NULL },
+};
+
+int __init omap4xxx_dt_clk_init(void)
+{
+	int rc;
+	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll;
+
+	ti_dt_clocks_register(omap44xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	/*
+	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+	 * domain can transition to retention state when not in use.
+	 */
+	usb_dpll = clk_get_sys(NULL, "dpll_usb_ck");
+	rc = clk_set_rate(usb_dpll, OMAP4_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
+	/*
+	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
+	 * state when turning the ABE clock domain. Workaround this by
+	 * locking the ABE DPLL on boot.
+	 * Lock the ABE DPLL in any case to avoid issues with audio.
+	 */
+	abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_refclk_mux_ck");
+	sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck");
+	rc = clk_set_parent(abe_dpll_ref, sys_32k_ck);
+	abe_dpll = clk_get_sys(NULL, "dpll_abe_ck");
+	if (!rc)
+		rc = clk_set_rate(abe_dpll, OMAP4_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index e8c1b22..40b5477 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -229,6 +229,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
 int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+int omap2_clk_disable_autoidle_all(void);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -244,6 +245,8 @@ void ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
 int of_ti_clk_autoidle_setup(struct device_node *node);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
+int omap4xxx_dt_clk_init(void);
+
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
 void of_ti_clk_deny_autoidle_all(void);
-- 
1.7.9.5

[PATCHv11 21/49] CLK: TI: add omap5 clock init file

[Tero Kristo]

clk-54xx.c now contains the clock init functionality for omap5, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/io.c  |    1 +
 drivers/clk/ti/Makefile   |    1 +
 drivers/clk/ti/clk-54xx.c |  239 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h    |    1 +
 4 files changed, 242 insertions(+)
 create mode 100644 drivers/clk/ti/clk-54xx.c

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index cd22262..3d9b3fc 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -666,6 +666,7 @@ void __init omap5_init_early(void)
 	omap54xx_clockdomains_init();
 	omap54xx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_clk_init = omap5xxx_dt_clk_init;
 }
 
 void __init omap5_init_late(void)
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 381f1f8..935e5d2 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -3,4 +3,5 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 endif
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
new file mode 100644
index 0000000..c876e6e
--- /dev/null
+++ b/drivers/clk/ti/clk-54xx.c
@@ -0,0 +1,239 @@
+/*
+ * OMAP5 Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo (t-kristo@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#define OMAP5_DPLL_ABE_DEFFREQ				98304000
+
+static struct ti_dt_clk omap54xx_clks[] = {
+	DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"),
+	DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"),
+	DT_CLK(NULL, "secure_32k_clk_src_ck", "secure_32k_clk_src_ck"),
+	DT_CLK(NULL, "slimbus_src_clk", "slimbus_src_clk"),
+	DT_CLK(NULL, "slimbus_clk", "slimbus_clk"),
+	DT_CLK(NULL, "sys_32k_ck", "sys_32k_ck"),
+	DT_CLK(NULL, "virt_12000000_ck", "virt_12000000_ck"),
+	DT_CLK(NULL, "virt_13000000_ck", "virt_13000000_ck"),
+	DT_CLK(NULL, "virt_16800000_ck", "virt_16800000_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_27000000_ck", "virt_27000000_ck"),
+	DT_CLK(NULL, "virt_38400000_ck", "virt_38400000_ck"),
+	DT_CLK(NULL, "sys_clkin", "sys_clkin"),
+	DT_CLK(NULL, "xclk60mhsp1_ck", "xclk60mhsp1_ck"),
+	DT_CLK(NULL, "xclk60mhsp2_ck", "xclk60mhsp2_ck"),
+	DT_CLK(NULL, "abe_dpll_bypass_clk_mux", "abe_dpll_bypass_clk_mux"),
+	DT_CLK(NULL, "abe_dpll_clk_mux", "abe_dpll_clk_mux"),
+	DT_CLK(NULL, "dpll_abe_ck", "dpll_abe_ck"),
+	DT_CLK(NULL, "dpll_abe_x2_ck", "dpll_abe_x2_ck"),
+	DT_CLK(NULL, "dpll_abe_m2x2_ck", "dpll_abe_m2x2_ck"),
+	DT_CLK(NULL, "abe_24m_fclk", "abe_24m_fclk"),
+	DT_CLK(NULL, "abe_clk", "abe_clk"),
+	DT_CLK(NULL, "abe_iclk", "abe_iclk"),
+	DT_CLK(NULL, "abe_lp_clk_div", "abe_lp_clk_div"),
+	DT_CLK(NULL, "dpll_abe_m3x2_ck", "dpll_abe_m3x2_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_h21x2_ck", "dpll_core_h21x2_ck"),
+	DT_CLK(NULL, "c2c_fclk", "c2c_fclk"),
+	DT_CLK(NULL, "c2c_iclk", "c2c_iclk"),
+	DT_CLK(NULL, "custefuse_sys_gfclk_div", "custefuse_sys_gfclk_div"),
+	DT_CLK(NULL, "dpll_core_h11x2_ck", "dpll_core_h11x2_ck"),
+	DT_CLK(NULL, "dpll_core_h12x2_ck", "dpll_core_h12x2_ck"),
+	DT_CLK(NULL, "dpll_core_h13x2_ck", "dpll_core_h13x2_ck"),
+	DT_CLK(NULL, "dpll_core_h14x2_ck", "dpll_core_h14x2_ck"),
+	DT_CLK(NULL, "dpll_core_h22x2_ck", "dpll_core_h22x2_ck"),
+	DT_CLK(NULL, "dpll_core_h23x2_ck", "dpll_core_h23x2_ck"),
+	DT_CLK(NULL, "dpll_core_h24x2_ck", "dpll_core_h24x2_ck"),
+	DT_CLK(NULL, "dpll_core_m2_ck", "dpll_core_m2_ck"),
+	DT_CLK(NULL, "dpll_core_m3x2_ck", "dpll_core_m3x2_ck"),
+	DT_CLK(NULL, "iva_dpll_hs_clk_div", "iva_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_iva_ck", "dpll_iva_ck"),
+	DT_CLK(NULL, "dpll_iva_x2_ck", "dpll_iva_x2_ck"),
+	DT_CLK(NULL, "dpll_iva_h11x2_ck", "dpll_iva_h11x2_ck"),
+	DT_CLK(NULL, "dpll_iva_h12x2_ck", "dpll_iva_h12x2_ck"),
+	DT_CLK(NULL, "mpu_dpll_hs_clk_div", "mpu_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "per_dpll_hs_clk_div", "per_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_x2_ck", "dpll_per_x2_ck"),
+	DT_CLK(NULL, "dpll_per_h11x2_ck", "dpll_per_h11x2_ck"),
+	DT_CLK(NULL, "dpll_per_h12x2_ck", "dpll_per_h12x2_ck"),
+	DT_CLK(NULL, "dpll_per_h14x2_ck", "dpll_per_h14x2_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_m2x2_ck", "dpll_per_m2x2_ck"),
+	DT_CLK(NULL, "dpll_per_m3x2_ck", "dpll_per_m3x2_ck"),
+	DT_CLK(NULL, "dpll_unipro1_ck", "dpll_unipro1_ck"),
+	DT_CLK(NULL, "dpll_unipro1_clkdcoldo", "dpll_unipro1_clkdcoldo"),
+	DT_CLK(NULL, "dpll_unipro1_m2_ck", "dpll_unipro1_m2_ck"),
+	DT_CLK(NULL, "dpll_unipro2_ck", "dpll_unipro2_ck"),
+	DT_CLK(NULL, "dpll_unipro2_clkdcoldo", "dpll_unipro2_clkdcoldo"),
+	DT_CLK(NULL, "dpll_unipro2_m2_ck", "dpll_unipro2_m2_ck"),
+	DT_CLK(NULL, "usb_dpll_hs_clk_div", "usb_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_usb_ck", "dpll_usb_ck"),
+	DT_CLK(NULL, "dpll_usb_clkdcoldo", "dpll_usb_clkdcoldo"),
+	DT_CLK(NULL, "dpll_usb_m2_ck", "dpll_usb_m2_ck"),
+	DT_CLK(NULL, "dss_syc_gfclk_div", "dss_syc_gfclk_div"),
+	DT_CLK(NULL, "func_128m_clk", "func_128m_clk"),
+	DT_CLK(NULL, "func_12m_fclk", "func_12m_fclk"),
+	DT_CLK(NULL, "func_24m_clk", "func_24m_clk"),
+	DT_CLK(NULL, "func_48m_fclk", "func_48m_fclk"),
+	DT_CLK(NULL, "func_96m_fclk", "func_96m_fclk"),
+	DT_CLK(NULL, "l3_iclk_div", "l3_iclk_div"),
+	DT_CLK(NULL, "gpu_l3_iclk", "gpu_l3_iclk"),
+	DT_CLK(NULL, "l3init_60m_fclk", "l3init_60m_fclk"),
+	DT_CLK(NULL, "wkupaon_iclk_mux", "wkupaon_iclk_mux"),
+	DT_CLK(NULL, "l3instr_ts_gclk_div", "l3instr_ts_gclk_div"),
+	DT_CLK(NULL, "l4_root_clk_div", "l4_root_clk_div"),
+	DT_CLK(NULL, "dss_32khz_clk", "dss_32khz_clk"),
+	DT_CLK(NULL, "dss_48mhz_clk", "dss_48mhz_clk"),
+	DT_CLK(NULL, "dss_dss_clk", "dss_dss_clk"),
+	DT_CLK(NULL, "dss_sys_clk", "dss_sys_clk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "gpio6_dbclk", "gpio6_dbclk"),
+	DT_CLK(NULL, "gpio7_dbclk", "gpio7_dbclk"),
+	DT_CLK(NULL, "gpio8_dbclk", "gpio8_dbclk"),
+	DT_CLK(NULL, "iss_ctrlclk", "iss_ctrlclk"),
+	DT_CLK(NULL, "lli_txphy_clk", "lli_txphy_clk"),
+	DT_CLK(NULL, "lli_txphy_ls_clk", "lli_txphy_ls_clk"),
+	DT_CLK(NULL, "mmc1_32khz_clk", "mmc1_32khz_clk"),
+	DT_CLK(NULL, "sata_ref_clk", "sata_ref_clk"),
+	DT_CLK(NULL, "slimbus1_slimbus_clk", "slimbus1_slimbus_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "usb_host_hs_hsic480m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "usb_host_hs_hsic480m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic480m_p3_clk", "usb_host_hs_hsic480m_p3_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "usb_host_hs_hsic60m_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "usb_host_hs_hsic60m_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_hsic60m_p3_clk", "usb_host_hs_hsic60m_p3_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "usb_host_hs_utmi_p1_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "usb_host_hs_utmi_p2_clk"),
+	DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "usb_host_hs_utmi_p3_clk"),
+	DT_CLK(NULL, "usb_otg_ss_refclk960m", "usb_otg_ss_refclk960m"),
+	DT_CLK(NULL, "usb_phy_cm_clk32k", "usb_phy_cm_clk32k"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "usb_tll_hs_usb_ch0_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "usb_tll_hs_usb_ch1_clk"),
+	DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "usb_tll_hs_usb_ch2_clk"),
+	DT_CLK(NULL, "aess_fclk", "aess_fclk"),
+	DT_CLK(NULL, "dmic_sync_mux_ck", "dmic_sync_mux_ck"),
+	DT_CLK(NULL, "dmic_gfclk", "dmic_gfclk"),
+	DT_CLK(NULL, "fdif_fclk", "fdif_fclk"),
+	DT_CLK(NULL, "gpu_core_gclk_mux", "gpu_core_gclk_mux"),
+	DT_CLK(NULL, "gpu_hyd_gclk_mux", "gpu_hyd_gclk_mux"),
+	DT_CLK(NULL, "hsi_fclk", "hsi_fclk"),
+	DT_CLK(NULL, "mcasp_sync_mux_ck", "mcasp_sync_mux_ck"),
+	DT_CLK(NULL, "mcasp_gfclk", "mcasp_gfclk"),
+	DT_CLK(NULL, "mcbsp1_sync_mux_ck", "mcbsp1_sync_mux_ck"),
+	DT_CLK(NULL, "mcbsp1_gfclk", "mcbsp1_gfclk"),
+	DT_CLK(NULL, "mcbsp2_sync_mux_ck", "mcbsp2_sync_mux_ck"),
+	DT_CLK(NULL, "mcbsp2_gfclk", "mcbsp2_gfclk"),
+	DT_CLK(NULL, "mcbsp3_sync_mux_ck", "mcbsp3_sync_mux_ck"),
+	DT_CLK(NULL, "mcbsp3_gfclk", "mcbsp3_gfclk"),
+	DT_CLK(NULL, "mmc1_fclk_mux", "mmc1_fclk_mux"),
+	DT_CLK(NULL, "mmc1_fclk", "mmc1_fclk"),
+	DT_CLK(NULL, "mmc2_fclk_mux", "mmc2_fclk_mux"),
+	DT_CLK(NULL, "mmc2_fclk", "mmc2_fclk"),
+	DT_CLK(NULL, "timer10_gfclk_mux", "timer10_gfclk_mux"),
+	DT_CLK(NULL, "timer11_gfclk_mux", "timer11_gfclk_mux"),
+	DT_CLK(NULL, "timer1_gfclk_mux", "timer1_gfclk_mux"),
+	DT_CLK(NULL, "timer2_gfclk_mux", "timer2_gfclk_mux"),
+	DT_CLK(NULL, "timer3_gfclk_mux", "timer3_gfclk_mux"),
+	DT_CLK(NULL, "timer4_gfclk_mux", "timer4_gfclk_mux"),
+	DT_CLK(NULL, "timer5_gfclk_mux", "timer5_gfclk_mux"),
+	DT_CLK(NULL, "timer6_gfclk_mux", "timer6_gfclk_mux"),
+	DT_CLK(NULL, "timer7_gfclk_mux", "timer7_gfclk_mux"),
+	DT_CLK(NULL, "timer8_gfclk_mux", "timer8_gfclk_mux"),
+	DT_CLK(NULL, "timer9_gfclk_mux", "timer9_gfclk_mux"),
+	DT_CLK(NULL, "utmi_p1_gfclk", "utmi_p1_gfclk"),
+	DT_CLK(NULL, "utmi_p2_gfclk", "utmi_p2_gfclk"),
+	DT_CLK(NULL, "auxclk0_src_ck", "auxclk0_src_ck"),
+	DT_CLK(NULL, "auxclk0_ck", "auxclk0_ck"),
+	DT_CLK(NULL, "auxclkreq0_ck", "auxclkreq0_ck"),
+	DT_CLK(NULL, "auxclk1_src_ck", "auxclk1_src_ck"),
+	DT_CLK(NULL, "auxclk1_ck", "auxclk1_ck"),
+	DT_CLK(NULL, "auxclkreq1_ck", "auxclkreq1_ck"),
+	DT_CLK(NULL, "auxclk2_src_ck", "auxclk2_src_ck"),
+	DT_CLK(NULL, "auxclk2_ck", "auxclk2_ck"),
+	DT_CLK(NULL, "auxclkreq2_ck", "auxclkreq2_ck"),
+	DT_CLK(NULL, "auxclk3_src_ck", "auxclk3_src_ck"),
+	DT_CLK(NULL, "auxclk3_ck", "auxclk3_ck"),
+	DT_CLK(NULL, "auxclkreq3_ck", "auxclkreq3_ck"),
+	DT_CLK(NULL, "gpmc_ck", "dummy_ck"),
+	DT_CLK("omap_i2c.1", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.2", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.3", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "mailboxes_ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.0", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.1", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.2", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.3", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.4", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.1", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.2", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.3", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.4", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.1", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.2", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.3", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "uart1_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart2_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart3_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart4_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbhost_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbtll_fck", "dummy_ck"),
+	DT_CLK("omap_wdt", "ick", "dummy_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
+	DT_CLK("omap_timer.1", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.2", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.3", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.4", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.9", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.10", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.11", "sys_ck", "sys_clkin"),
+	DT_CLK("omap_timer.5", "sys_ck", "dss_syc_gfclk_div"),
+	DT_CLK("omap_timer.6", "sys_ck", "dss_syc_gfclk_div"),
+	DT_CLK("omap_timer.7", "sys_ck", "dss_syc_gfclk_div"),
+	DT_CLK("omap_timer.8", "sys_ck", "dss_syc_gfclk_div"),
+	{ .node_name = NULL },
+};
+
+int __init omap5xxx_dt_clk_init(void)
+{
+	int rc;
+	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck;
+
+	ti_dt_clocks_register(omap54xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_clk_mux");
+	sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck");
+	rc = clk_set_parent(abe_dpll_ref, sys_32k_ck);
+	abe_dpll = clk_get_sys(NULL, "dpll_abe_ck");
+	if (!rc)
+		rc = clk_set_rate(abe_dpll, OMAP5_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 40b5477..0612e7e 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -246,6 +246,7 @@ int of_ti_clk_autoidle_setup(struct device_node *node);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
 int omap4xxx_dt_clk_init(void);
+int omap5xxx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv11 22/49] CLK: TI: omap5: Initialize USB_DPLL at boot

[Tero Kristo]

From: Roger Quadros <rogerq@ti.com>

USB_DPLL must be initialized and locked at boot so that
USB modules can work.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clk/ti/clk-54xx.c |   18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
index c876e6e..0ef9f58 100644
--- a/drivers/clk/ti/clk-54xx.c
+++ b/drivers/clk/ti/clk-54xx.c
@@ -19,6 +19,12 @@
 
 #define OMAP5_DPLL_ABE_DEFFREQ				98304000
 
+/*
+ * OMAP543x TRM, section "3.6.3.9.5 DPLL_USB Preferred Settings"
+ * states it must be at 960MHz
+ */
+#define OMAP5_DPLL_USB_DEFFREQ				960000000
+
 static struct ti_dt_clk omap54xx_clks[] = {
 	DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"),
 	DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"),
@@ -220,7 +226,7 @@ static struct ti_dt_clk omap54xx_clks[] = {
 int __init omap5xxx_dt_clk_init(void)
 {
 	int rc;
-	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck;
+	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll;
 
 	ti_dt_clocks_register(omap54xx_clks);
 
@@ -235,5 +241,15 @@ int __init omap5xxx_dt_clk_init(void)
 	if (rc)
 		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
+	usb_dpll = clk_get_sys(NULL, "dpll_usb_ck");
+	rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
+	usb_dpll = clk_get_sys(NULL, "dpll_usb_m2_ck");
+	rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ/2);
+	if (rc)
+		pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__);
+
 	return 0;
 }
-- 
1.7.9.5

[PATCHv11 23/49] CLK: TI: DRA7: Add APLL support

[Tero Kristo]

From: J Keerthy <j-keerthy@ti.com>

The patch adds support for DRA7 PCIe APLL. The APLL
sources the optional functional clocks for PCIe module.

APLL stands for Analog PLL. This is different when comapred
with DPLL meaning Digital PLL, the phase detection is done
using an analog circuit.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/apll.txt          |   31 +++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/apll.c                              |  219 ++++++++++++++++++++
 3 files changed, 251 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/apll.txt
 create mode 100644 drivers/clk/ti/apll.c

diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
new file mode 100644
index 0000000..7faf5a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/apll.txt
@@ -0,0 +1,31 @@
+Binding for Texas Instruments APLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped APLL with usually two selectable input clocks
+(reference clock and bypass clock), with analog phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) APLL mostly behaves like
+a subtype of a DPLL [2], although a simplified one at that.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/dpll.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-apll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the APLL.
+  It contains the information of registers in the following order:
+	"control" - contains the control register base address
+	"idlest" - contains the idlest register base address
+
+Examples:
+	apll_pcie_ck: apll_pcie_ck@4a008200 {
+		#clock-cells = <0>;
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x4a00821c 0x4>, <0x4a008220 0x4>;
+		compatible = "ti,dra7-apll-clock";
+	};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 935e5d2..3d71e1e 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
-					   composite.o mux.o
+					   composite.o mux.o apll.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 endif
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
new file mode 100644
index 0000000..6123a30
--- /dev/null
+++ b/drivers/clk/ti/apll.c
@@ -0,0 +1,219 @@
+/*
+ * OMAP APLL clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * J Keerthy <j-keerthy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+#include <linux/delay.h>
+
+#define APLL_FORCE_LOCK 0x1
+#define APLL_AUTO_IDLE	0x2
+#define MAX_APLL_WAIT_TRIES		1000000
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static int dra7_apll_enable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	int r = 0, i = 0;
+	struct dpll_data *ad;
+	const char *clk_name;
+	u8 state = 1;
+	u32 v;
+
+	ad = clk->dpll_data;
+	if (!ad)
+		return -EINVAL;
+
+	clk_name = __clk_get_name(clk->hw.clk);
+
+	state <<= __ffs(ad->idlest_mask);
+
+	/* Check is already locked */
+	v = ti_clk_ll_ops->clk_readl(ad->idlest_reg);
+
+	if ((v & ad->idlest_mask) == state)
+		return r;
+
+	v = ti_clk_ll_ops->clk_readl(ad->control_reg);
+	v &= ~ad->enable_mask;
+	v |= APLL_FORCE_LOCK << __ffs(ad->enable_mask);
+	ti_clk_ll_ops->clk_writel(v, ad->control_reg);
+
+	state <<= __ffs(ad->idlest_mask);
+
+	while (1) {
+		v = ti_clk_ll_ops->clk_readl(ad->idlest_reg);
+		if ((v & ad->idlest_mask) == state)
+			break;
+		if (i > MAX_APLL_WAIT_TRIES)
+			break;
+		i++;
+		udelay(1);
+	}
+
+	if (i == MAX_APLL_WAIT_TRIES) {
+		pr_warn("clock: %s failed transition to '%s'\n",
+			clk_name, (state) ? "locked" : "bypassed");
+	} else {
+		pr_debug("clock: %s transition to '%s' in %d loops\n",
+			 clk_name, (state) ? "locked" : "bypassed", i);
+
+		r = 0;
+	}
+
+	return r;
+}
+
+static void dra7_apll_disable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *ad;
+	u8 state = 1;
+	u32 v;
+
+	ad = clk->dpll_data;
+
+	state <<= __ffs(ad->idlest_mask);
+
+	v = ti_clk_ll_ops->clk_readl(ad->control_reg);
+	v &= ~ad->enable_mask;
+	v |= APLL_AUTO_IDLE << __ffs(ad->enable_mask);
+	ti_clk_ll_ops->clk_writel(v, ad->control_reg);
+}
+
+static int dra7_apll_is_enabled(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *ad;
+	u32 v;
+
+	ad = clk->dpll_data;
+
+	v = ti_clk_ll_ops->clk_readl(ad->control_reg);
+	v &= ad->enable_mask;
+
+	v >>= __ffs(ad->enable_mask);
+
+	return v == APLL_AUTO_IDLE ? 0 : 1;
+}
+
+static u8 dra7_init_apll_parent(struct clk_hw *hw)
+{
+	return 0;
+}
+
+static const struct clk_ops apll_ck_ops = {
+	.enable		= &dra7_apll_enable,
+	.disable	= &dra7_apll_disable,
+	.is_enabled	= &dra7_apll_is_enabled,
+	.get_parent	= &dra7_init_apll_parent,
+};
+
+static void __init omap_clk_register_apll(struct clk_hw *hw,
+					  struct device_node *node)
+{
+	struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw);
+	struct dpll_data *ad = clk_hw->dpll_data;
+	struct clk *clk;
+
+	ad->clk_ref = of_clk_get(node, 0);
+	ad->clk_bypass = of_clk_get(node, 1);
+
+	if (IS_ERR(ad->clk_ref) || IS_ERR(ad->clk_bypass)) {
+		pr_debug("clk-ref or clk-bypass for %s not ready, retry\n",
+			 node->name);
+		ti_clk_retry_init(node, hw, omap_clk_register_apll);
+		return;
+	}
+
+	clk = clk_register(NULL, &clk_hw->hw);
+	if (IS_ERR(clk)) {
+		pr_info("failed clk_register for %s (%ld)\n", node->name,
+			PTR_ERR(clk));
+		kfree(clk_hw->dpll_data);
+		kfree(clk_hw->hw.init->parent_names);
+		kfree(clk_hw->hw.init);
+		kfree(clk_hw);
+	} else {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		kfree(clk_hw->hw.init->parent_names);
+		kfree(clk_hw->hw.init);
+	}
+}
+
+static void __init of_dra7_apll_setup(struct device_node *node)
+{
+	struct dpll_data *ad = NULL;
+	struct clk_hw_omap *clk_hw = NULL;
+	struct clk_init_data *init = NULL;
+	const char **parent_names = NULL;
+	int i;
+
+	ad = kzalloc(sizeof(*ad), GFP_KERNEL);
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	init = kzalloc(sizeof(*init), GFP_KERNEL);
+	if (!ad || !clk_hw || !init)
+		goto cleanup;
+
+	clk_hw->dpll_data = ad;
+	clk_hw->hw.init = init;
+	clk_hw->flags = MEMMAP_ADDRESSING;
+
+	init->name = node->name;
+	init->ops = &apll_ck_ops;
+
+	init->num_parents = of_clk_get_parent_count(node);
+	if (init->num_parents < 1) {
+		pr_err("dra7 apll %s must have parent(s)\n", node->name);
+		goto cleanup;
+	}
+
+	parent_names = kzalloc(sizeof(char *) * init->num_parents, GFP_KERNEL);
+
+	for (i = 0; i < init->num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(node, i);
+
+	init->parent_names = parent_names;
+
+	ad->control_reg = ti_clk_get_reg_addr(node, 0);
+	ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
+
+	if (!ad->control_reg || !ad->idlest_reg)
+		goto cleanup;
+
+	ad->idlest_mask = 0x1;
+	ad->enable_mask = 0x3;
+
+	omap_clk_register_apll(&clk_hw->hw, node);
+	return;
+
+cleanup:
+	kfree(parent_names);
+	kfree(ad);
+	kfree(clk_hw);
+	kfree(init);
+}
+CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup);
-- 
1.7.9.5

[PATCHv11 24/49] CLK: TI: add dra7 clock init file

[Tero Kristo]

clk-7xx.c now contains the clock init functionality for dra7, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clk/ti/Makefile  |    1 +
 drivers/clk/ti/clk-7xx.c |  332 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h   |    1 +
 3 files changed, 334 insertions(+)
 create mode 100644 drivers/clk/ti/clk-7xx.c

diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 3d71e1e..f8ae4b5 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -4,4 +4,5 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   composite.o mux.o apll.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
+obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
 endif
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
new file mode 100644
index 0000000..9977653
--- /dev/null
+++ b/drivers/clk/ti/clk-7xx.c
@@ -0,0 +1,332 @@
+/*
+ * DRA7 Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo (t-kristo@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+#define DRA7_DPLL_ABE_DEFFREQ				361267200
+#define DRA7_DPLL_GMAC_DEFFREQ				1000000000
+
+
+static struct ti_dt_clk dra7xx_clks[] = {
+	DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"),
+	DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"),
+	DT_CLK(NULL, "atl_clkin2_ck", "atl_clkin2_ck"),
+	DT_CLK(NULL, "atlclkin3_ck", "atlclkin3_ck"),
+	DT_CLK(NULL, "hdmi_clkin_ck", "hdmi_clkin_ck"),
+	DT_CLK(NULL, "mlb_clkin_ck", "mlb_clkin_ck"),
+	DT_CLK(NULL, "mlbp_clkin_ck", "mlbp_clkin_ck"),
+	DT_CLK(NULL, "pciesref_acs_clk_ck", "pciesref_acs_clk_ck"),
+	DT_CLK(NULL, "ref_clkin0_ck", "ref_clkin0_ck"),
+	DT_CLK(NULL, "ref_clkin1_ck", "ref_clkin1_ck"),
+	DT_CLK(NULL, "ref_clkin2_ck", "ref_clkin2_ck"),
+	DT_CLK(NULL, "ref_clkin3_ck", "ref_clkin3_ck"),
+	DT_CLK(NULL, "rmii_clk_ck", "rmii_clk_ck"),
+	DT_CLK(NULL, "sdvenc_clkin_ck", "sdvenc_clkin_ck"),
+	DT_CLK(NULL, "secure_32k_clk_src_ck", "secure_32k_clk_src_ck"),
+	DT_CLK(NULL, "sys_32k_ck", "sys_32k_ck"),
+	DT_CLK(NULL, "virt_12000000_ck", "virt_12000000_ck"),
+	DT_CLK(NULL, "virt_13000000_ck", "virt_13000000_ck"),
+	DT_CLK(NULL, "virt_16800000_ck", "virt_16800000_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_20000000_ck", "virt_20000000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_27000000_ck", "virt_27000000_ck"),
+	DT_CLK(NULL, "virt_38400000_ck", "virt_38400000_ck"),
+	DT_CLK(NULL, "sys_clkin1", "sys_clkin1"),
+	DT_CLK(NULL, "sys_clkin2", "sys_clkin2"),
+	DT_CLK(NULL, "usb_otg_clkin_ck", "usb_otg_clkin_ck"),
+	DT_CLK(NULL, "video1_clkin_ck", "video1_clkin_ck"),
+	DT_CLK(NULL, "video1_m2_clkin_ck", "video1_m2_clkin_ck"),
+	DT_CLK(NULL, "video2_clkin_ck", "video2_clkin_ck"),
+	DT_CLK(NULL, "video2_m2_clkin_ck", "video2_m2_clkin_ck"),
+	DT_CLK(NULL, "abe_dpll_sys_clk_mux", "abe_dpll_sys_clk_mux"),
+	DT_CLK(NULL, "abe_dpll_bypass_clk_mux", "abe_dpll_bypass_clk_mux"),
+	DT_CLK(NULL, "abe_dpll_clk_mux", "abe_dpll_clk_mux"),
+	DT_CLK(NULL, "dpll_abe_ck", "dpll_abe_ck"),
+	DT_CLK(NULL, "dpll_abe_x2_ck", "dpll_abe_x2_ck"),
+	DT_CLK(NULL, "dpll_abe_m2x2_ck", "dpll_abe_m2x2_ck"),
+	DT_CLK(NULL, "abe_24m_fclk", "abe_24m_fclk"),
+	DT_CLK(NULL, "abe_clk", "abe_clk"),
+	DT_CLK(NULL, "aess_fclk", "aess_fclk"),
+	DT_CLK(NULL, "abe_giclk_div", "abe_giclk_div"),
+	DT_CLK(NULL, "abe_lp_clk_div", "abe_lp_clk_div"),
+	DT_CLK(NULL, "abe_sys_clk_div", "abe_sys_clk_div"),
+	DT_CLK(NULL, "adc_gfclk_mux", "adc_gfclk_mux"),
+	DT_CLK(NULL, "dpll_pcie_ref_ck", "dpll_pcie_ref_ck"),
+	DT_CLK(NULL, "dpll_pcie_ref_m2ldo_ck", "dpll_pcie_ref_m2ldo_ck"),
+	DT_CLK(NULL, "apll_pcie_ck", "apll_pcie_ck"),
+	DT_CLK(NULL, "apll_pcie_clkvcoldo", "apll_pcie_clkvcoldo"),
+	DT_CLK(NULL, "apll_pcie_clkvcoldo_div", "apll_pcie_clkvcoldo_div"),
+	DT_CLK(NULL, "apll_pcie_m2_ck", "apll_pcie_m2_ck"),
+	DT_CLK(NULL, "sys_clk1_dclk_div", "sys_clk1_dclk_div"),
+	DT_CLK(NULL, "sys_clk2_dclk_div", "sys_clk2_dclk_div"),
+	DT_CLK(NULL, "dpll_abe_m2_ck", "dpll_abe_m2_ck"),
+	DT_CLK(NULL, "per_abe_x1_dclk_div", "per_abe_x1_dclk_div"),
+	DT_CLK(NULL, "dpll_abe_m3x2_ck", "dpll_abe_m3x2_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_h12x2_ck", "dpll_core_h12x2_ck"),
+	DT_CLK(NULL, "mpu_dpll_hs_clk_div", "mpu_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "mpu_dclk_div", "mpu_dclk_div"),
+	DT_CLK(NULL, "dsp_dpll_hs_clk_div", "dsp_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_dsp_ck", "dpll_dsp_ck"),
+	DT_CLK(NULL, "dpll_dsp_m2_ck", "dpll_dsp_m2_ck"),
+	DT_CLK(NULL, "dsp_gclk_div", "dsp_gclk_div"),
+	DT_CLK(NULL, "iva_dpll_hs_clk_div", "iva_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_iva_ck", "dpll_iva_ck"),
+	DT_CLK(NULL, "dpll_iva_m2_ck", "dpll_iva_m2_ck"),
+	DT_CLK(NULL, "iva_dclk", "iva_dclk"),
+	DT_CLK(NULL, "dpll_gpu_ck", "dpll_gpu_ck"),
+	DT_CLK(NULL, "dpll_gpu_m2_ck", "dpll_gpu_m2_ck"),
+	DT_CLK(NULL, "gpu_dclk", "gpu_dclk"),
+	DT_CLK(NULL, "dpll_core_m2_ck", "dpll_core_m2_ck"),
+	DT_CLK(NULL, "core_dpll_out_dclk_div", "core_dpll_out_dclk_div"),
+	DT_CLK(NULL, "dpll_ddr_ck", "dpll_ddr_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_ck", "dpll_ddr_m2_ck"),
+	DT_CLK(NULL, "emif_phy_dclk_div", "emif_phy_dclk_div"),
+	DT_CLK(NULL, "dpll_gmac_ck", "dpll_gmac_ck"),
+	DT_CLK(NULL, "dpll_gmac_m2_ck", "dpll_gmac_m2_ck"),
+	DT_CLK(NULL, "gmac_250m_dclk_div", "gmac_250m_dclk_div"),
+	DT_CLK(NULL, "video2_dclk_div", "video2_dclk_div"),
+	DT_CLK(NULL, "video1_dclk_div", "video1_dclk_div"),
+	DT_CLK(NULL, "hdmi_dclk_div", "hdmi_dclk_div"),
+	DT_CLK(NULL, "per_dpll_hs_clk_div", "per_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "func_96m_aon_dclk_div", "func_96m_aon_dclk_div"),
+	DT_CLK(NULL, "usb_dpll_hs_clk_div", "usb_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_usb_ck", "dpll_usb_ck"),
+	DT_CLK(NULL, "dpll_usb_m2_ck", "dpll_usb_m2_ck"),
+	DT_CLK(NULL, "l3init_480m_dclk_div", "l3init_480m_dclk_div"),
+	DT_CLK(NULL, "usb_otg_dclk_div", "usb_otg_dclk_div"),
+	DT_CLK(NULL, "sata_dclk_div", "sata_dclk_div"),
+	DT_CLK(NULL, "dpll_pcie_ref_m2_ck", "dpll_pcie_ref_m2_ck"),
+	DT_CLK(NULL, "pcie2_dclk_div", "pcie2_dclk_div"),
+	DT_CLK(NULL, "pcie_dclk_div", "pcie_dclk_div"),
+	DT_CLK(NULL, "emu_dclk_div", "emu_dclk_div"),
+	DT_CLK(NULL, "secure_32k_dclk_div", "secure_32k_dclk_div"),
+	DT_CLK(NULL, "eve_dpll_hs_clk_div", "eve_dpll_hs_clk_div"),
+	DT_CLK(NULL, "dpll_eve_ck", "dpll_eve_ck"),
+	DT_CLK(NULL, "dpll_eve_m2_ck", "dpll_eve_m2_ck"),
+	DT_CLK(NULL, "eve_dclk_div", "eve_dclk_div"),
+	DT_CLK(NULL, "clkoutmux0_clk_mux", "clkoutmux0_clk_mux"),
+	DT_CLK(NULL, "clkoutmux1_clk_mux", "clkoutmux1_clk_mux"),
+	DT_CLK(NULL, "clkoutmux2_clk_mux", "clkoutmux2_clk_mux"),
+	DT_CLK(NULL, "custefuse_sys_gfclk_div", "custefuse_sys_gfclk_div"),
+	DT_CLK(NULL, "dpll_core_h13x2_ck", "dpll_core_h13x2_ck"),
+	DT_CLK(NULL, "dpll_core_h14x2_ck", "dpll_core_h14x2_ck"),
+	DT_CLK(NULL, "dpll_core_h22x2_ck", "dpll_core_h22x2_ck"),
+	DT_CLK(NULL, "dpll_core_h23x2_ck", "dpll_core_h23x2_ck"),
+	DT_CLK(NULL, "dpll_core_h24x2_ck", "dpll_core_h24x2_ck"),
+	DT_CLK(NULL, "dpll_ddr_x2_ck", "dpll_ddr_x2_ck"),
+	DT_CLK(NULL, "dpll_ddr_h11x2_ck", "dpll_ddr_h11x2_ck"),
+	DT_CLK(NULL, "dpll_dsp_x2_ck", "dpll_dsp_x2_ck"),
+	DT_CLK(NULL, "dpll_dsp_m3x2_ck", "dpll_dsp_m3x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_x2_ck", "dpll_gmac_x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_h11x2_ck", "dpll_gmac_h11x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_h12x2_ck", "dpll_gmac_h12x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_h13x2_ck", "dpll_gmac_h13x2_ck"),
+	DT_CLK(NULL, "dpll_gmac_m3x2_ck", "dpll_gmac_m3x2_ck"),
+	DT_CLK(NULL, "dpll_per_x2_ck", "dpll_per_x2_ck"),
+	DT_CLK(NULL, "dpll_per_h11x2_ck", "dpll_per_h11x2_ck"),
+	DT_CLK(NULL, "dpll_per_h12x2_ck", "dpll_per_h12x2_ck"),
+	DT_CLK(NULL, "dpll_per_h13x2_ck", "dpll_per_h13x2_ck"),
+	DT_CLK(NULL, "dpll_per_h14x2_ck", "dpll_per_h14x2_ck"),
+	DT_CLK(NULL, "dpll_per_m2x2_ck", "dpll_per_m2x2_ck"),
+	DT_CLK(NULL, "dpll_usb_clkdcoldo", "dpll_usb_clkdcoldo"),
+	DT_CLK(NULL, "eve_clk", "eve_clk"),
+	DT_CLK(NULL, "func_128m_clk", "func_128m_clk"),
+	DT_CLK(NULL, "func_12m_fclk", "func_12m_fclk"),
+	DT_CLK(NULL, "func_24m_clk", "func_24m_clk"),
+	DT_CLK(NULL, "func_48m_fclk", "func_48m_fclk"),
+	DT_CLK(NULL, "func_96m_fclk", "func_96m_fclk"),
+	DT_CLK(NULL, "gmii_m_clk_div", "gmii_m_clk_div"),
+	DT_CLK(NULL, "hdmi_clk2_div", "hdmi_clk2_div"),
+	DT_CLK(NULL, "hdmi_div_clk", "hdmi_div_clk"),
+	DT_CLK(NULL, "hdmi_dpll_clk_mux", "hdmi_dpll_clk_mux"),
+	DT_CLK(NULL, "l3_iclk_div", "l3_iclk_div"),
+	DT_CLK(NULL, "l3init_60m_fclk", "l3init_60m_fclk"),
+	DT_CLK(NULL, "l4_root_clk_div", "l4_root_clk_div"),
+	DT_CLK(NULL, "mlb_clk", "mlb_clk"),
+	DT_CLK(NULL, "mlbp_clk", "mlbp_clk"),
+	DT_CLK(NULL, "per_abe_x1_gfclk2_div", "per_abe_x1_gfclk2_div"),
+	DT_CLK(NULL, "timer_sys_clk_div", "timer_sys_clk_div"),
+	DT_CLK(NULL, "video1_clk2_div", "video1_clk2_div"),
+	DT_CLK(NULL, "video1_div_clk", "video1_div_clk"),
+	DT_CLK(NULL, "video1_dpll_clk_mux", "video1_dpll_clk_mux"),
+	DT_CLK(NULL, "video2_clk2_div", "video2_clk2_div"),
+	DT_CLK(NULL, "video2_div_clk", "video2_div_clk"),
+	DT_CLK(NULL, "video2_dpll_clk_mux", "video2_dpll_clk_mux"),
+	DT_CLK(NULL, "wkupaon_iclk_mux", "wkupaon_iclk_mux"),
+	DT_CLK(NULL, "dss_32khz_clk", "dss_32khz_clk"),
+	DT_CLK(NULL, "dss_48mhz_clk", "dss_48mhz_clk"),
+	DT_CLK(NULL, "dss_dss_clk", "dss_dss_clk"),
+	DT_CLK(NULL, "dss_hdmi_clk", "dss_hdmi_clk"),
+	DT_CLK(NULL, "dss_video1_clk", "dss_video1_clk"),
+	DT_CLK(NULL, "dss_video2_clk", "dss_video2_clk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "gpio6_dbclk", "gpio6_dbclk"),
+	DT_CLK(NULL, "gpio7_dbclk", "gpio7_dbclk"),
+	DT_CLK(NULL, "gpio8_dbclk", "gpio8_dbclk"),
+	DT_CLK(NULL, "mmc1_clk32k", "mmc1_clk32k"),
+	DT_CLK(NULL, "mmc2_clk32k", "mmc2_clk32k"),
+	DT_CLK(NULL, "mmc3_clk32k", "mmc3_clk32k"),
+	DT_CLK(NULL, "mmc4_clk32k", "mmc4_clk32k"),
+	DT_CLK(NULL, "sata_ref_clk", "sata_ref_clk"),
+	DT_CLK(NULL, "usb_otg_ss1_refclk960m", "usb_otg_ss1_refclk960m"),
+	DT_CLK(NULL, "usb_otg_ss2_refclk960m", "usb_otg_ss2_refclk960m"),
+	DT_CLK(NULL, "usb_phy1_always_on_clk32k", "usb_phy1_always_on_clk32k"),
+	DT_CLK(NULL, "usb_phy2_always_on_clk32k", "usb_phy2_always_on_clk32k"),
+	DT_CLK(NULL, "usb_phy3_always_on_clk32k", "usb_phy3_always_on_clk32k"),
+	DT_CLK(NULL, "atl_dpll_clk_mux", "atl_dpll_clk_mux"),
+	DT_CLK(NULL, "atl_gfclk_mux", "atl_gfclk_mux"),
+	DT_CLK(NULL, "dcan1_sys_clk_mux", "dcan1_sys_clk_mux"),
+	DT_CLK(NULL, "gmac_gmii_ref_clk_div", "gmac_gmii_ref_clk_div"),
+	DT_CLK(NULL, "gmac_rft_clk_mux", "gmac_rft_clk_mux"),
+	DT_CLK(NULL, "gpu_core_gclk_mux", "gpu_core_gclk_mux"),
+	DT_CLK(NULL, "gpu_hyd_gclk_mux", "gpu_hyd_gclk_mux"),
+	DT_CLK(NULL, "ipu1_gfclk_mux", "ipu1_gfclk_mux"),
+	DT_CLK(NULL, "l3instr_ts_gclk_div", "l3instr_ts_gclk_div"),
+	DT_CLK(NULL, "mcasp1_ahclkr_mux", "mcasp1_ahclkr_mux"),
+	DT_CLK(NULL, "mcasp1_ahclkx_mux", "mcasp1_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp1_aux_gfclk_mux", "mcasp1_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp2_ahclkr_mux", "mcasp2_ahclkr_mux"),
+	DT_CLK(NULL, "mcasp2_ahclkx_mux", "mcasp2_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp2_aux_gfclk_mux", "mcasp2_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp3_ahclkx_mux", "mcasp3_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp3_aux_gfclk_mux", "mcasp3_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp4_ahclkx_mux", "mcasp4_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp4_aux_gfclk_mux", "mcasp4_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp5_ahclkx_mux", "mcasp5_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp5_aux_gfclk_mux", "mcasp5_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp6_ahclkx_mux", "mcasp6_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp6_aux_gfclk_mux", "mcasp6_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp7_ahclkx_mux", "mcasp7_ahclkx_mux"),
+	DT_CLK(NULL, "mcasp7_aux_gfclk_mux", "mcasp7_aux_gfclk_mux"),
+	DT_CLK(NULL, "mcasp8_ahclk_mux", "mcasp8_ahclk_mux"),
+	DT_CLK(NULL, "mcasp8_aux_gfclk_mux", "mcasp8_aux_gfclk_mux"),
+	DT_CLK(NULL, "mmc1_fclk_mux", "mmc1_fclk_mux"),
+	DT_CLK(NULL, "mmc1_fclk_div", "mmc1_fclk_div"),
+	DT_CLK(NULL, "mmc2_fclk_mux", "mmc2_fclk_mux"),
+	DT_CLK(NULL, "mmc2_fclk_div", "mmc2_fclk_div"),
+	DT_CLK(NULL, "mmc3_gfclk_mux", "mmc3_gfclk_mux"),
+	DT_CLK(NULL, "mmc3_gfclk_div", "mmc3_gfclk_div"),
+	DT_CLK(NULL, "mmc4_gfclk_mux", "mmc4_gfclk_mux"),
+	DT_CLK(NULL, "mmc4_gfclk_div", "mmc4_gfclk_div"),
+	DT_CLK(NULL, "qspi_gfclk_mux", "qspi_gfclk_mux"),
+	DT_CLK(NULL, "qspi_gfclk_div", "qspi_gfclk_div"),
+	DT_CLK(NULL, "timer10_gfclk_mux", "timer10_gfclk_mux"),
+	DT_CLK(NULL, "timer11_gfclk_mux", "timer11_gfclk_mux"),
+	DT_CLK(NULL, "timer13_gfclk_mux", "timer13_gfclk_mux"),
+	DT_CLK(NULL, "timer14_gfclk_mux", "timer14_gfclk_mux"),
+	DT_CLK(NULL, "timer15_gfclk_mux", "timer15_gfclk_mux"),
+	DT_CLK(NULL, "timer16_gfclk_mux", "timer16_gfclk_mux"),
+	DT_CLK(NULL, "timer1_gfclk_mux", "timer1_gfclk_mux"),
+	DT_CLK(NULL, "timer2_gfclk_mux", "timer2_gfclk_mux"),
+	DT_CLK(NULL, "timer3_gfclk_mux", "timer3_gfclk_mux"),
+	DT_CLK(NULL, "timer4_gfclk_mux", "timer4_gfclk_mux"),
+	DT_CLK(NULL, "timer5_gfclk_mux", "timer5_gfclk_mux"),
+	DT_CLK(NULL, "timer6_gfclk_mux", "timer6_gfclk_mux"),
+	DT_CLK(NULL, "timer7_gfclk_mux", "timer7_gfclk_mux"),
+	DT_CLK(NULL, "timer8_gfclk_mux", "timer8_gfclk_mux"),
+	DT_CLK(NULL, "timer9_gfclk_mux", "timer9_gfclk_mux"),
+	DT_CLK(NULL, "uart10_gfclk_mux", "uart10_gfclk_mux"),
+	DT_CLK(NULL, "uart1_gfclk_mux", "uart1_gfclk_mux"),
+	DT_CLK(NULL, "uart2_gfclk_mux", "uart2_gfclk_mux"),
+	DT_CLK(NULL, "uart3_gfclk_mux", "uart3_gfclk_mux"),
+	DT_CLK(NULL, "uart4_gfclk_mux", "uart4_gfclk_mux"),
+	DT_CLK(NULL, "uart5_gfclk_mux", "uart5_gfclk_mux"),
+	DT_CLK(NULL, "uart6_gfclk_mux", "uart6_gfclk_mux"),
+	DT_CLK(NULL, "uart7_gfclk_mux", "uart7_gfclk_mux"),
+	DT_CLK(NULL, "uart8_gfclk_mux", "uart8_gfclk_mux"),
+	DT_CLK(NULL, "uart9_gfclk_mux", "uart9_gfclk_mux"),
+	DT_CLK(NULL, "vip1_gclk_mux", "vip1_gclk_mux"),
+	DT_CLK(NULL, "vip2_gclk_mux", "vip2_gclk_mux"),
+	DT_CLK(NULL, "vip3_gclk_mux", "vip3_gclk_mux"),
+	DT_CLK(NULL, "gpmc_ck", "dummy_ck"),
+	DT_CLK("omap_i2c.1", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.2", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.3", "ick", "dummy_ck"),
+	DT_CLK("omap_i2c.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "mailboxes_ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.0", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.1", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.2", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.3", "ick", "dummy_ck"),
+	DT_CLK("omap_hsmmc.4", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.1", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.2", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.3", "ick", "dummy_ck"),
+	DT_CLK("omap-mcbsp.4", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.1", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.2", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.3", "ick", "dummy_ck"),
+	DT_CLK("omap2_mcspi.4", "ick", "dummy_ck"),
+	DT_CLK(NULL, "uart1_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart2_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart3_ick", "dummy_ck"),
+	DT_CLK(NULL, "uart4_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbhost_ick", "dummy_ck"),
+	DT_CLK("usbhs_omap", "usbtll_fck", "dummy_ck"),
+	DT_CLK("omap_wdt", "ick", "dummy_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
+	DT_CLK("4ae18000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48032000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48034000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48036000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("4803e000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48086000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48088000.timer", "timer_sys_ck", "sys_clkin2"),
+	DT_CLK("48820000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK("48822000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK("48824000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK("48826000.timer", "timer_sys_ck", "timer_sys_clk_div"),
+	DT_CLK(NULL, "sys_clkin", "sys_clkin1"),
+	{ .node_name = NULL },
+};
+
+int __init dra7xx_dt_clk_init(void)
+{
+	int rc;
+	struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck;
+
+	ti_dt_clocks_register(dra7xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	abe_dpll_mux = clk_get_sys(NULL, "abe_dpll_sys_clk_mux");
+	sys_clkin2 = clk_get_sys(NULL, "sys_clkin2");
+	dpll_ck = clk_get_sys(NULL, "dpll_abe_ck");
+
+	rc = clk_set_parent(abe_dpll_mux, sys_clkin2);
+	if (!rc)
+		rc = clk_set_rate(dpll_ck, DRA7_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+
+	dpll_ck = clk_get_sys(NULL, "dpll_gmac_ck");
+	rc = clk_set_rate(dpll_ck, DRA7_DPLL_GMAC_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure GMAC DPLL!\n", __func__);
+
+	return rc;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 0612e7e..364ef04 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -247,6 +247,7 @@ int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
 int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
+int dra7xx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv11 25/49] CLK: TI: add am33xx clock init file

[Tero Kristo]

clk-33xx.c now contains the clock init functionality for am33xx, including
DT clock registration and adding of static clkdev entries.

This patch also moves the omap2_clk_enable_init_clocks declaration to
the driver include, as this is needed by the am33xx clock init code.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock.h |    1 -
 drivers/clk/ti/Makefile     |    1 +
 drivers/clk/ti/clk-33xx.c   |  161 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h      |    2 +
 4 files changed, 164 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ti/clk-33xx.c

diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b83fca6..1da9dc3 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -249,7 +249,6 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
 int omap2_clk_deny_idle(struct clk *clk);
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
 int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
 void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index f8ae4b5..7eb6f2b 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -2,6 +2,7 @@ ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o apll.o
+obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
new file mode 100644
index 0000000..776ee45
--- /dev/null
+++ b/drivers/clk/ti/clk-33xx.c
@@ -0,0 +1,161 @@
+/*
+ * AM33XX Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc
+ *     Tero Kristo (t-kristo@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+
+static struct ti_dt_clk am33xx_clks[] = {
+	DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
+	DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_24000000_ck", "virt_24000000_ck"),
+	DT_CLK(NULL, "virt_25000000_ck", "virt_25000000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "sys_clkin_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "tclkin_ck", "tclkin_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_m4_ck", "dpll_core_m4_ck"),
+	DT_CLK(NULL, "dpll_core_m5_ck", "dpll_core_m5_ck"),
+	DT_CLK(NULL, "dpll_core_m6_ck", "dpll_core_m6_ck"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK("cpu0", NULL, "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "dpll_ddr_ck", "dpll_ddr_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_ck", "dpll_ddr_m2_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_div2_ck", "dpll_ddr_m2_div2_ck"),
+	DT_CLK(NULL, "dpll_disp_ck", "dpll_disp_ck"),
+	DT_CLK(NULL, "dpll_disp_m2_ck", "dpll_disp_m2_ck"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", "dpll_per_m2_div4_wkupdm_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_ck", "dpll_per_m2_div4_ck"),
+	DT_CLK(NULL, "adc_tsc_fck", "adc_tsc_fck"),
+	DT_CLK(NULL, "cefuse_fck", "cefuse_fck"),
+	DT_CLK(NULL, "clkdiv32k_ck", "clkdiv32k_ck"),
+	DT_CLK(NULL, "clkdiv32k_ick", "clkdiv32k_ick"),
+	DT_CLK(NULL, "dcan0_fck", "dcan0_fck"),
+	DT_CLK("481cc000.d_can", NULL, "dcan0_fck"),
+	DT_CLK(NULL, "dcan1_fck", "dcan1_fck"),
+	DT_CLK("481d0000.d_can", NULL, "dcan1_fck"),
+	DT_CLK(NULL, "pruss_ocp_gclk", "pruss_ocp_gclk"),
+	DT_CLK(NULL, "mcasp0_fck", "mcasp0_fck"),
+	DT_CLK(NULL, "mcasp1_fck", "mcasp1_fck"),
+	DT_CLK(NULL, "mmu_fck", "mmu_fck"),
+	DT_CLK(NULL, "smartreflex0_fck", "smartreflex0_fck"),
+	DT_CLK(NULL, "smartreflex1_fck", "smartreflex1_fck"),
+	DT_CLK(NULL, "sha0_fck", "sha0_fck"),
+	DT_CLK(NULL, "aes0_fck", "aes0_fck"),
+	DT_CLK(NULL, "rng_fck", "rng_fck"),
+	DT_CLK(NULL, "timer1_fck", "timer1_fck"),
+	DT_CLK(NULL, "timer2_fck", "timer2_fck"),
+	DT_CLK(NULL, "timer3_fck", "timer3_fck"),
+	DT_CLK(NULL, "timer4_fck", "timer4_fck"),
+	DT_CLK(NULL, "timer5_fck", "timer5_fck"),
+	DT_CLK(NULL, "timer6_fck", "timer6_fck"),
+	DT_CLK(NULL, "timer7_fck", "timer7_fck"),
+	DT_CLK(NULL, "usbotg_fck", "usbotg_fck"),
+	DT_CLK(NULL, "ieee5000_fck", "ieee5000_fck"),
+	DT_CLK(NULL, "wdt1_fck", "wdt1_fck"),
+	DT_CLK(NULL, "l4_rtc_gclk", "l4_rtc_gclk"),
+	DT_CLK(NULL, "l3_gclk", "l3_gclk"),
+	DT_CLK(NULL, "dpll_core_m4_div2_ck", "dpll_core_m4_div2_ck"),
+	DT_CLK(NULL, "l4hs_gclk", "l4hs_gclk"),
+	DT_CLK(NULL, "l3s_gclk", "l3s_gclk"),
+	DT_CLK(NULL, "l4fw_gclk", "l4fw_gclk"),
+	DT_CLK(NULL, "l4ls_gclk", "l4ls_gclk"),
+	DT_CLK(NULL, "clk_24mhz", "clk_24mhz"),
+	DT_CLK(NULL, "sysclk_div_ck", "sysclk_div_ck"),
+	DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
+	DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
+	DT_CLK(NULL, "gpio0_dbclk_mux_ck", "gpio0_dbclk_mux_ck"),
+	DT_CLK(NULL, "gpio0_dbclk", "gpio0_dbclk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "lcd_gclk", "lcd_gclk"),
+	DT_CLK(NULL, "mmc_clk", "mmc_clk"),
+	DT_CLK(NULL, "gfx_fclk_clksel_ck", "gfx_fclk_clksel_ck"),
+	DT_CLK(NULL, "gfx_fck_div_ck", "gfx_fck_div_ck"),
+	DT_CLK(NULL, "sysclkout_pre_ck", "sysclkout_pre_ck"),
+	DT_CLK(NULL, "clkout2_div_ck", "clkout2_div_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "clkdiv32k_ick"),
+	DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "dbg_sysclk_ck", "dbg_sysclk_ck"),
+	DT_CLK(NULL, "dbg_clka_ck", "dbg_clka_ck"),
+	DT_CLK(NULL, "stm_pmd_clock_mux_ck", "stm_pmd_clock_mux_ck"),
+	DT_CLK(NULL, "trace_pmd_clk_mux_ck", "trace_pmd_clk_mux_ck"),
+	DT_CLK(NULL, "stm_clk_div_ck", "stm_clk_div_ck"),
+	DT_CLK(NULL, "trace_clk_div_ck", "trace_clk_div_ck"),
+	DT_CLK(NULL, "clkout2_ck", "clkout2_ck"),
+	DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"),
+	DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"),
+	DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"),
+	{ .node_name = NULL },
+};
+
+static const char *enable_init_clks[] = {
+	"dpll_ddr_m2_ck",
+	"dpll_mpu_m2_ck",
+	"l3_gclk",
+	"l4hs_gclk",
+	"l4fw_gclk",
+	"l4ls_gclk",
+	/* Required for external peripherals like, Audio codecs */
+	"clkout2_ck",
+};
+
+int __init am33xx_dt_clk_init(void)
+{
+	struct clk *clk1, *clk2;
+
+	ti_dt_clocks_register(am33xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	omap2_clk_enable_init_clocks(enable_init_clks,
+				     ARRAY_SIZE(enable_init_clks));
+
+	/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always
+	 *    physically present, in such a case HWMOD enabling of
+	 *    clock would be failure with default parent. And timer
+	 *    probe thinks clock is already enabled, this leads to
+	 *    crash upon accessing timer 3 & 6 registers in probe.
+	 *    Fix by setting parent of both these timers to master
+	 *    oscillator clock.
+	 */
+
+	clk1 = clk_get_sys(NULL, "sys_clkin_ck");
+	clk2 = clk_get_sys(NULL, "timer3_fck");
+	clk_set_parent(clk2, clk1);
+
+	clk2 = clk_get_sys(NULL, "timer6_fck");
+	clk_set_parent(clk2, clk1);
+	/*
+	 * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
+	 * the design/spec, so as a result, for example, timer which supposed
+	 * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
+	 * not expected by any use-case, so change WDT1 clock source to PRCM
+	 * 32KHz clock.
+	 */
+	clk1 = clk_get_sys(NULL, "wdt1_fck");
+	clk2 = clk_get_sys(NULL, "clkdiv32k_ick");
+	clk_set_parent(clk1, clk2);
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 364ef04..4a89ce8 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -230,6 +230,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 int omap2_clk_disable_autoidle_all(void);
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
 int omap2_dflt_clk_enable(struct clk_hw *hw);
@@ -248,6 +249,7 @@ int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
 int dra7xx_dt_clk_init(void);
+int am33xx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

[PATCHv11 27/49] CLK: TI: add omap3 clock init file

[Tero Kristo]

clk-3xxx.c now contains the clock init functionality for omap3, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock3xxx.h |    1 -
 drivers/clk/ti/Makefile         |    2 +-
 drivers/clk/ti/clk-3xxx.c       |  401 +++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h          |    5 +
 4 files changed, 407 insertions(+), 2 deletions(-)
 create mode 100644 drivers/clk/ti/clk-3xxx.c

diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h
index dab90e2..78d9f56 100644
--- a/arch/arm/mach-omap2/clock3xxx.h
+++ b/arch/arm/mach-omap2/clock3xxx.h
@@ -11,7 +11,6 @@
 int omap3xxx_clk_init(void);
 int omap3_core_dpll_m2_set_rate(struct clk_hw *clk, unsigned long rate,
 					unsigned long parent_rate);
-void omap3_clk_lock_dpll5(void);
 
 extern struct clk *sdrc_ick_p;
 extern struct clk *arm_fck_p;
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index e42a703..ab386c8 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -3,7 +3,7 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o apll.o
 obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= interface.o
+obj-$(CONFIG_ARCH_OMAP3)		+= interface.o clk-3xxx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
new file mode 100644
index 0000000..d323023
--- /dev/null
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -0,0 +1,401 @@
+/*
+ * OMAP3 Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc
+ *     Tero Kristo (t-kristo@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+
+
+static struct ti_dt_clk omap3xxx_clks[] = {
+	DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
+	DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
+	DT_CLK(NULL, "virt_12m_ck", "virt_12m_ck"),
+	DT_CLK(NULL, "virt_13m_ck", "virt_13m_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "virt_38_4m_ck", "virt_38_4m_ck"),
+	DT_CLK(NULL, "osc_sys_ck", "osc_sys_ck"),
+	DT_CLK("twl", "fck", "osc_sys_ck"),
+	DT_CLK(NULL, "sys_ck", "sys_ck"),
+	DT_CLK(NULL, "omap_96m_alwon_fck", "omap_96m_alwon_fck"),
+	DT_CLK("etb", "emu_core_alwon_ck", "emu_core_alwon_ck"),
+	DT_CLK(NULL, "sys_altclk", "sys_altclk"),
+	DT_CLK(NULL, "mcbsp_clks", "mcbsp_clks"),
+	DT_CLK(NULL, "sys_clkout1", "sys_clkout1"),
+	DT_CLK(NULL, "dpll1_ck", "dpll1_ck"),
+	DT_CLK(NULL, "dpll1_x2_ck", "dpll1_x2_ck"),
+	DT_CLK(NULL, "dpll1_x2m2_ck", "dpll1_x2m2_ck"),
+	DT_CLK(NULL, "dpll3_ck", "dpll3_ck"),
+	DT_CLK(NULL, "core_ck", "core_ck"),
+	DT_CLK(NULL, "dpll3_x2_ck", "dpll3_x2_ck"),
+	DT_CLK(NULL, "dpll3_m2_ck", "dpll3_m2_ck"),
+	DT_CLK(NULL, "dpll3_m2x2_ck", "dpll3_m2x2_ck"),
+	DT_CLK(NULL, "dpll3_m3_ck", "dpll3_m3_ck"),
+	DT_CLK(NULL, "dpll3_m3x2_ck", "dpll3_m3x2_ck"),
+	DT_CLK(NULL, "dpll4_ck", "dpll4_ck"),
+	DT_CLK(NULL, "dpll4_x2_ck", "dpll4_x2_ck"),
+	DT_CLK(NULL, "omap_96m_fck", "omap_96m_fck"),
+	DT_CLK(NULL, "cm_96m_fck", "cm_96m_fck"),
+	DT_CLK(NULL, "omap_54m_fck", "omap_54m_fck"),
+	DT_CLK(NULL, "omap_48m_fck", "omap_48m_fck"),
+	DT_CLK(NULL, "omap_12m_fck", "omap_12m_fck"),
+	DT_CLK(NULL, "dpll4_m2_ck", "dpll4_m2_ck"),
+	DT_CLK(NULL, "dpll4_m2x2_ck", "dpll4_m2x2_ck"),
+	DT_CLK(NULL, "dpll4_m3_ck", "dpll4_m3_ck"),
+	DT_CLK(NULL, "dpll4_m3x2_ck", "dpll4_m3x2_ck"),
+	DT_CLK(NULL, "dpll4_m4_ck", "dpll4_m4_ck"),
+	DT_CLK(NULL, "dpll4_m4x2_ck", "dpll4_m4x2_ck"),
+	DT_CLK(NULL, "dpll4_m5_ck", "dpll4_m5_ck"),
+	DT_CLK(NULL, "dpll4_m5x2_ck", "dpll4_m5x2_ck"),
+	DT_CLK(NULL, "dpll4_m6_ck", "dpll4_m6_ck"),
+	DT_CLK(NULL, "dpll4_m6x2_ck", "dpll4_m6x2_ck"),
+	DT_CLK("etb", "emu_per_alwon_ck", "emu_per_alwon_ck"),
+	DT_CLK(NULL, "clkout2_src_ck", "clkout2_src_ck"),
+	DT_CLK(NULL, "sys_clkout2", "sys_clkout2"),
+	DT_CLK(NULL, "corex2_fck", "corex2_fck"),
+	DT_CLK(NULL, "dpll1_fck", "dpll1_fck"),
+	DT_CLK(NULL, "mpu_ck", "mpu_ck"),
+	DT_CLK(NULL, "arm_fck", "arm_fck"),
+	DT_CLK("etb", "emu_mpu_alwon_ck", "emu_mpu_alwon_ck"),
+	DT_CLK(NULL, "l3_ick", "l3_ick"),
+	DT_CLK(NULL, "l4_ick", "l4_ick"),
+	DT_CLK(NULL, "rm_ick", "rm_ick"),
+	DT_CLK(NULL, "gpt10_fck", "gpt10_fck"),
+	DT_CLK(NULL, "gpt11_fck", "gpt11_fck"),
+	DT_CLK(NULL, "core_96m_fck", "core_96m_fck"),
+	DT_CLK(NULL, "mmchs2_fck", "mmchs2_fck"),
+	DT_CLK(NULL, "mmchs1_fck", "mmchs1_fck"),
+	DT_CLK(NULL, "i2c3_fck", "i2c3_fck"),
+	DT_CLK(NULL, "i2c2_fck", "i2c2_fck"),
+	DT_CLK(NULL, "i2c1_fck", "i2c1_fck"),
+	DT_CLK(NULL, "mcbsp5_fck", "mcbsp5_fck"),
+	DT_CLK(NULL, "mcbsp1_fck", "mcbsp1_fck"),
+	DT_CLK(NULL, "core_48m_fck", "core_48m_fck"),
+	DT_CLK(NULL, "mcspi4_fck", "mcspi4_fck"),
+	DT_CLK(NULL, "mcspi3_fck", "mcspi3_fck"),
+	DT_CLK(NULL, "mcspi2_fck", "mcspi2_fck"),
+	DT_CLK(NULL, "mcspi1_fck", "mcspi1_fck"),
+	DT_CLK(NULL, "uart2_fck", "uart2_fck"),
+	DT_CLK(NULL, "uart1_fck", "uart1_fck"),
+	DT_CLK(NULL, "core_12m_fck", "core_12m_fck"),
+	DT_CLK("omap_hdq.0", "fck", "hdq_fck"),
+	DT_CLK(NULL, "hdq_fck", "hdq_fck"),
+	DT_CLK(NULL, "core_l3_ick", "core_l3_ick"),
+	DT_CLK(NULL, "sdrc_ick", "sdrc_ick"),
+	DT_CLK(NULL, "gpmc_fck", "gpmc_fck"),
+	DT_CLK(NULL, "core_l4_ick", "core_l4_ick"),
+	DT_CLK("omap_hsmmc.1", "ick", "mmchs2_ick"),
+	DT_CLK("omap_hsmmc.0", "ick", "mmchs1_ick"),
+	DT_CLK(NULL, "mmchs2_ick", "mmchs2_ick"),
+	DT_CLK(NULL, "mmchs1_ick", "mmchs1_ick"),
+	DT_CLK("omap_hdq.0", "ick", "hdq_ick"),
+	DT_CLK(NULL, "hdq_ick", "hdq_ick"),
+	DT_CLK("omap2_mcspi.4", "ick", "mcspi4_ick"),
+	DT_CLK("omap2_mcspi.3", "ick", "mcspi3_ick"),
+	DT_CLK("omap2_mcspi.2", "ick", "mcspi2_ick"),
+	DT_CLK("omap2_mcspi.1", "ick", "mcspi1_ick"),
+	DT_CLK(NULL, "mcspi4_ick", "mcspi4_ick"),
+	DT_CLK(NULL, "mcspi3_ick", "mcspi3_ick"),
+	DT_CLK(NULL, "mcspi2_ick", "mcspi2_ick"),
+	DT_CLK(NULL, "mcspi1_ick", "mcspi1_ick"),
+	DT_CLK("omap_i2c.3", "ick", "i2c3_ick"),
+	DT_CLK("omap_i2c.2", "ick", "i2c2_ick"),
+	DT_CLK("omap_i2c.1", "ick", "i2c1_ick"),
+	DT_CLK(NULL, "i2c3_ick", "i2c3_ick"),
+	DT_CLK(NULL, "i2c2_ick", "i2c2_ick"),
+	DT_CLK(NULL, "i2c1_ick", "i2c1_ick"),
+	DT_CLK(NULL, "uart2_ick", "uart2_ick"),
+	DT_CLK(NULL, "uart1_ick", "uart1_ick"),
+	DT_CLK(NULL, "gpt11_ick", "gpt11_ick"),
+	DT_CLK(NULL, "gpt10_ick", "gpt10_ick"),
+	DT_CLK("omap-mcbsp.5", "ick", "mcbsp5_ick"),
+	DT_CLK("omap-mcbsp.1", "ick", "mcbsp1_ick"),
+	DT_CLK(NULL, "mcbsp5_ick", "mcbsp5_ick"),
+	DT_CLK(NULL, "mcbsp1_ick", "mcbsp1_ick"),
+	DT_CLK(NULL, "omapctrl_ick", "omapctrl_ick"),
+	DT_CLK(NULL, "dss_tv_fck", "dss_tv_fck"),
+	DT_CLK(NULL, "dss_96m_fck", "dss_96m_fck"),
+	DT_CLK(NULL, "dss2_alwon_fck", "dss2_alwon_fck"),
+	DT_CLK(NULL, "utmi_p1_gfclk", "dummy_ck"),
+	DT_CLK(NULL, "utmi_p2_gfclk", "dummy_ck"),
+	DT_CLK(NULL, "xclk60mhsp1_ck", "dummy_ck"),
+	DT_CLK(NULL, "xclk60mhsp2_ck", "dummy_ck"),
+	DT_CLK(NULL, "init_60m_fclk", "dummy_ck"),
+	DT_CLK(NULL, "gpt1_fck", "gpt1_fck"),
+	DT_CLK(NULL, "aes2_ick", "aes2_ick"),
+	DT_CLK(NULL, "wkup_32k_fck", "wkup_32k_fck"),
+	DT_CLK(NULL, "gpio1_dbck", "gpio1_dbck"),
+	DT_CLK(NULL, "sha12_ick", "sha12_ick"),
+	DT_CLK(NULL, "wdt2_fck", "wdt2_fck"),
+	DT_CLK("omap_wdt", "ick", "wdt2_ick"),
+	DT_CLK(NULL, "wdt2_ick", "wdt2_ick"),
+	DT_CLK(NULL, "wdt1_ick", "wdt1_ick"),
+	DT_CLK(NULL, "gpio1_ick", "gpio1_ick"),
+	DT_CLK(NULL, "omap_32ksync_ick", "omap_32ksync_ick"),
+	DT_CLK(NULL, "gpt12_ick", "gpt12_ick"),
+	DT_CLK(NULL, "gpt1_ick", "gpt1_ick"),
+	DT_CLK(NULL, "per_96m_fck", "per_96m_fck"),
+	DT_CLK(NULL, "per_48m_fck", "per_48m_fck"),
+	DT_CLK(NULL, "uart3_fck", "uart3_fck"),
+	DT_CLK(NULL, "gpt2_fck", "gpt2_fck"),
+	DT_CLK(NULL, "gpt3_fck", "gpt3_fck"),
+	DT_CLK(NULL, "gpt4_fck", "gpt4_fck"),
+	DT_CLK(NULL, "gpt5_fck", "gpt5_fck"),
+	DT_CLK(NULL, "gpt6_fck", "gpt6_fck"),
+	DT_CLK(NULL, "gpt7_fck", "gpt7_fck"),
+	DT_CLK(NULL, "gpt8_fck", "gpt8_fck"),
+	DT_CLK(NULL, "gpt9_fck", "gpt9_fck"),
+	DT_CLK(NULL, "per_32k_alwon_fck", "per_32k_alwon_fck"),
+	DT_CLK(NULL, "gpio6_dbck", "gpio6_dbck"),
+	DT_CLK(NULL, "gpio5_dbck", "gpio5_dbck"),
+	DT_CLK(NULL, "gpio4_dbck", "gpio4_dbck"),
+	DT_CLK(NULL, "gpio3_dbck", "gpio3_dbck"),
+	DT_CLK(NULL, "gpio2_dbck", "gpio2_dbck"),
+	DT_CLK(NULL, "wdt3_fck", "wdt3_fck"),
+	DT_CLK(NULL, "per_l4_ick", "per_l4_ick"),
+	DT_CLK(NULL, "gpio6_ick", "gpio6_ick"),
+	DT_CLK(NULL, "gpio5_ick", "gpio5_ick"),
+	DT_CLK(NULL, "gpio4_ick", "gpio4_ick"),
+	DT_CLK(NULL, "gpio3_ick", "gpio3_ick"),
+	DT_CLK(NULL, "gpio2_ick", "gpio2_ick"),
+	DT_CLK(NULL, "wdt3_ick", "wdt3_ick"),
+	DT_CLK(NULL, "uart3_ick", "uart3_ick"),
+	DT_CLK(NULL, "uart4_ick", "uart4_ick"),
+	DT_CLK(NULL, "gpt9_ick", "gpt9_ick"),
+	DT_CLK(NULL, "gpt8_ick", "gpt8_ick"),
+	DT_CLK(NULL, "gpt7_ick", "gpt7_ick"),
+	DT_CLK(NULL, "gpt6_ick", "gpt6_ick"),
+	DT_CLK(NULL, "gpt5_ick", "gpt5_ick"),
+	DT_CLK(NULL, "gpt4_ick", "gpt4_ick"),
+	DT_CLK(NULL, "gpt3_ick", "gpt3_ick"),
+	DT_CLK(NULL, "gpt2_ick", "gpt2_ick"),
+	DT_CLK("omap-mcbsp.2", "ick", "mcbsp2_ick"),
+	DT_CLK("omap-mcbsp.3", "ick", "mcbsp3_ick"),
+	DT_CLK("omap-mcbsp.4", "ick", "mcbsp4_ick"),
+	DT_CLK(NULL, "mcbsp4_ick", "mcbsp2_ick"),
+	DT_CLK(NULL, "mcbsp3_ick", "mcbsp3_ick"),
+	DT_CLK(NULL, "mcbsp2_ick", "mcbsp4_ick"),
+	DT_CLK(NULL, "mcbsp2_fck", "mcbsp2_fck"),
+	DT_CLK(NULL, "mcbsp3_fck", "mcbsp3_fck"),
+	DT_CLK(NULL, "mcbsp4_fck", "mcbsp4_fck"),
+	DT_CLK("etb", "emu_src_ck", "emu_src_ck"),
+	DT_CLK(NULL, "emu_src_ck", "emu_src_ck"),
+	DT_CLK(NULL, "pclk_fck", "pclk_fck"),
+	DT_CLK(NULL, "pclkx2_fck", "pclkx2_fck"),
+	DT_CLK(NULL, "atclk_fck", "atclk_fck"),
+	DT_CLK(NULL, "traceclk_src_fck", "traceclk_src_fck"),
+	DT_CLK(NULL, "traceclk_fck", "traceclk_fck"),
+	DT_CLK(NULL, "secure_32k_fck", "secure_32k_fck"),
+	DT_CLK(NULL, "gpt12_fck", "gpt12_fck"),
+	DT_CLK(NULL, "wdt1_fck", "wdt1_fck"),
+	DT_CLK(NULL, "timer_32k_ck", "omap_32k_fck"),
+	DT_CLK(NULL, "timer_sys_ck", "sys_ck"),
+	DT_CLK(NULL, "cpufreq_ck", "dpll1_ck"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap34xx_omap36xx_clks[] = {
+	DT_CLK(NULL, "aes1_ick", "aes1_ick"),
+	DT_CLK("omap_rng", "ick", "rng_ick"),
+	DT_CLK("omap3-rom-rng", "ick", "rng_ick"),
+	DT_CLK(NULL, "sha11_ick", "sha11_ick"),
+	DT_CLK(NULL, "des1_ick", "des1_ick"),
+	DT_CLK(NULL, "cam_mclk", "cam_mclk"),
+	DT_CLK(NULL, "cam_ick", "cam_ick"),
+	DT_CLK(NULL, "csi2_96m_fck", "csi2_96m_fck"),
+	DT_CLK(NULL, "security_l3_ick", "security_l3_ick"),
+	DT_CLK(NULL, "pka_ick", "pka_ick"),
+	DT_CLK(NULL, "icr_ick", "icr_ick"),
+	DT_CLK("omap-aes", "ick", "aes2_ick"),
+	DT_CLK("omap-sham", "ick", "sha12_ick"),
+	DT_CLK(NULL, "des2_ick", "des2_ick"),
+	DT_CLK(NULL, "mspro_ick", "mspro_ick"),
+	DT_CLK(NULL, "mailboxes_ick", "mailboxes_ick"),
+	DT_CLK(NULL, "ssi_l4_ick", "ssi_l4_ick"),
+	DT_CLK(NULL, "sr1_fck", "sr1_fck"),
+	DT_CLK(NULL, "sr2_fck", "sr2_fck"),
+	DT_CLK(NULL, "sr_l4_ick", "sr_l4_ick"),
+	DT_CLK(NULL, "security_l4_ick2", "security_l4_ick2"),
+	DT_CLK(NULL, "wkup_l4_ick", "wkup_l4_ick"),
+	DT_CLK(NULL, "dpll2_fck", "dpll2_fck"),
+	DT_CLK(NULL, "iva2_ck", "iva2_ck"),
+	DT_CLK(NULL, "modem_fck", "modem_fck"),
+	DT_CLK(NULL, "sad2d_ick", "sad2d_ick"),
+	DT_CLK(NULL, "mad2d_ick", "mad2d_ick"),
+	DT_CLK(NULL, "mspro_fck", "mspro_fck"),
+	DT_CLK(NULL, "dpll2_ck", "dpll2_ck"),
+	DT_CLK(NULL, "dpll2_m2_ck", "dpll2_m2_ck"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap36xx_omap3430es2plus_clks[] = {
+	DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es2"),
+	DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es2"),
+	DT_CLK("musb-omap2430", "ick", "hsotgusb_ick_3430es2"),
+	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es2"),
+	DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es2"),
+	DT_CLK(NULL, "usim_fck", "usim_fck"),
+	DT_CLK(NULL, "usim_ick", "usim_ick"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap3430es1_clks[] = {
+	DT_CLK(NULL, "gfx_l3_ck", "gfx_l3_ck"),
+	DT_CLK(NULL, "gfx_l3_fck", "gfx_l3_fck"),
+	DT_CLK(NULL, "gfx_l3_ick", "gfx_l3_ick"),
+	DT_CLK(NULL, "gfx_cg1_ck", "gfx_cg1_ck"),
+	DT_CLK(NULL, "gfx_cg2_ck", "gfx_cg2_ck"),
+	DT_CLK(NULL, "d2d_26m_fck", "d2d_26m_fck"),
+	DT_CLK(NULL, "fshostusb_fck", "fshostusb_fck"),
+	DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es1"),
+	DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es1"),
+	DT_CLK("musb-omap2430", "ick", "hsotgusb_ick_3430es1"),
+	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es1"),
+	DT_CLK(NULL, "fac_ick", "fac_ick"),
+	DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es1"),
+	DT_CLK(NULL, "usb_l4_ick", "usb_l4_ick"),
+	DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es1"),
+	DT_CLK("omapdss_dss", "ick", "dss_ick_3430es1"),
+	DT_CLK(NULL, "dss_ick", "dss_ick_3430es1"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap36xx_am35xx_omap3430es2plus_clks[] = {
+	DT_CLK(NULL, "virt_16_8m_ck", "virt_16_8m_ck"),
+	DT_CLK(NULL, "dpll5_ck", "dpll5_ck"),
+	DT_CLK(NULL, "dpll5_m2_ck", "dpll5_m2_ck"),
+	DT_CLK(NULL, "sgx_fck", "sgx_fck"),
+	DT_CLK(NULL, "sgx_ick", "sgx_ick"),
+	DT_CLK(NULL, "cpefuse_fck", "cpefuse_fck"),
+	DT_CLK(NULL, "ts_fck", "ts_fck"),
+	DT_CLK(NULL, "usbtll_fck", "usbtll_fck"),
+	DT_CLK(NULL, "usbtll_ick", "usbtll_ick"),
+	DT_CLK("omap_hsmmc.2", "ick", "mmchs3_ick"),
+	DT_CLK(NULL, "mmchs3_ick", "mmchs3_ick"),
+	DT_CLK(NULL, "mmchs3_fck", "mmchs3_fck"),
+	DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es2"),
+	DT_CLK("omapdss_dss", "ick", "dss_ick_3430es2"),
+	DT_CLK(NULL, "dss_ick", "dss_ick_3430es2"),
+	DT_CLK(NULL, "usbhost_120m_fck", "usbhost_120m_fck"),
+	DT_CLK(NULL, "usbhost_48m_fck", "usbhost_48m_fck"),
+	DT_CLK(NULL, "usbhost_ick", "usbhost_ick"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk am35xx_clks[] = {
+	DT_CLK(NULL, "ipss_ick", "ipss_ick"),
+	DT_CLK(NULL, "rmii_ck", "rmii_ck"),
+	DT_CLK(NULL, "pclk_ck", "pclk_ck"),
+	DT_CLK(NULL, "emac_ick", "emac_ick"),
+	DT_CLK(NULL, "emac_fck", "emac_fck"),
+	DT_CLK("davinci_emac.0", NULL, "emac_ick"),
+	DT_CLK("davinci_mdio.0", NULL, "emac_fck"),
+	DT_CLK("vpfe-capture", "master", "vpfe_ick"),
+	DT_CLK("vpfe-capture", "slave", "vpfe_fck"),
+	DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_am35xx"),
+	DT_CLK(NULL, "hsotgusb_fck", "hsotgusb_fck_am35xx"),
+	DT_CLK(NULL, "hecc_ck", "hecc_ck"),
+	DT_CLK(NULL, "uart4_ick", "uart4_ick_am35xx"),
+	DT_CLK(NULL, "uart4_fck", "uart4_fck_am35xx"),
+	{ .node_name = NULL },
+};
+
+static struct ti_dt_clk omap36xx_clks[] = {
+	DT_CLK(NULL, "omap_192m_alwon_fck", "omap_192m_alwon_fck"),
+	DT_CLK(NULL, "uart4_fck", "uart4_fck"),
+	{ .node_name = NULL },
+};
+
+static const char *enable_init_clks[] = {
+	"sdrc_ick",
+	"gpmc_fck",
+	"omapctrl_ick",
+};
+
+enum {
+	OMAP3_SOC_AM35XX,
+	OMAP3_SOC_OMAP3430_ES1,
+	OMAP3_SOC_OMAP3430_ES2_PLUS,
+	OMAP3_SOC_OMAP3630,
+	OMAP3_SOC_TI81XX,
+};
+
+static int __init omap3xxx_dt_clk_init(int soc_type)
+{
+	if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES1 ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
+		ti_dt_clocks_register(omap3xxx_clks);
+
+	if (soc_type == OMAP3_SOC_AM35XX)
+		ti_dt_clocks_register(am35xx_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3630 || soc_type == OMAP3_SOC_AM35XX ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
+		ti_dt_clocks_register(omap36xx_am35xx_omap3430es2plus_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3430_ES1)
+		ti_dt_clocks_register(omap3430es1_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS ||
+	    soc_type == OMAP3_SOC_OMAP3630)
+		ti_dt_clocks_register(omap36xx_omap3430es2plus_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3430_ES1 ||
+	    soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS ||
+	    soc_type == OMAP3_SOC_OMAP3630)
+		ti_dt_clocks_register(omap34xx_omap36xx_clks);
+
+	if (soc_type == OMAP3_SOC_OMAP3630)
+		ti_dt_clocks_register(omap36xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	omap2_clk_enable_init_clocks(enable_init_clks,
+				     ARRAY_SIZE(enable_init_clks));
+
+	pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
+		(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 1000000),
+		(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 100000) % 10,
+		(clk_get_rate(clk_get_sys(NULL, "core_ck")) / 1000000),
+		(clk_get_rate(clk_get_sys(NULL, "arm_fck")) / 1000000));
+
+	if (soc_type != OMAP3_SOC_TI81XX && soc_type != OMAP3_SOC_OMAP3430_ES1)
+		omap3_clk_lock_dpll5();
+
+	return 0;
+}
+
+int __init omap3430_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3430_ES2_PLUS);
+}
+
+int __init omap3630_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3630);
+}
+
+int __init am35xx_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_AM35XX);
+}
+
+int __init ti81xx_dt_clk_init(void)
+{
+	return omap3xxx_dt_clk_init(OMAP3_SOC_TI81XX);
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 943e716..2f8a9f8 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -236,6 +236,7 @@ int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 int omap2_dflt_clk_enable(struct clk_hw *hw);
 void omap2_dflt_clk_disable(struct clk_hw *hw);
 int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap3_clk_lock_dpll5(void);
 
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
@@ -246,6 +247,10 @@ void ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
 int of_ti_clk_autoidle_setup(struct device_node *node);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
+int omap3430_dt_clk_init(void);
+int omap3630_dt_clk_init(void);
+int am35xx_dt_clk_init(void);
+int ti81xx_dt_clk_init(void);
 int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
 int dra7xx_dt_clk_init(void);
-- 
1.7.9.5

[PATCHv11 30/49] ARM: dts: omap5 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the OMAP5 power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/omap5.dtsi           |   54 ++
 arch/arm/boot/dts/omap54xx-clocks.dtsi | 1399 ++++++++++++++++++++++++++++++++
 2 files changed, 1453 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap54xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 17fe896..d385b71 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -107,6 +107,58 @@
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
+		prm: prm@4ae06000 {
+			compatible = "ti,omap5-prm";
+			reg = <0x4ae06000 0x3000>;
+
+			prm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prm_clockdomains: clockdomains {
+			};
+		};
+
+		cm_core_aon: cm_core_aon@4a004000 {
+			compatible = "ti,omap5-cm-core-aon";
+			reg = <0x4a004000 0x2000>;
+
+			cm_core_aon_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_core_aon_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@4ae0a000 {
+			compatible = "ti,omap5-scrm";
+			reg = <0x4ae0a000 0x2000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		cm_core: cm_core@4a008000 {
+			compatible = "ti,omap5-cm-core";
+			reg = <0x4a008000 0x3000>;
+
+			cm_core_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_core_clockdomains: clockdomains {
+			};
+		};
+
 		counter32k: counter@4ae04000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4ae04000 0x40>;
@@ -750,3 +802,5 @@
 		};
 	};
 };
+
+/include/ "omap54xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
new file mode 100644
index 0000000..d487fda
--- /dev/null
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -0,0 +1,1399 @@
+/*
+ * Device Tree Source for OMAP5 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_core_aon_clocks {
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	abe_iclk: abe_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&abe_clk>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h21x2_ck: dpll_core_h21x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	c2c_fclk: c2c_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h21x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	c2c_iclk: c2c_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&c2c_fclk>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_h11x2_ck: dpll_core_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_iclk_div: l3_iclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpu_l3_iclk: gpu_l3_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_root_clk_div: l4_root_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_clk>;
+		ti,bit-shift = <11>;
+		reg = <0x0560>;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x0528>;
+	};
+
+	dmic_sync_mux_ck: dmic_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0538>;
+	};
+
+	dmic_gfclk: dmic_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0538>;
+	};
+
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0540>;
+	};
+
+	mcasp_gfclk: mcasp_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0540>;
+	};
+
+	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0548>;
+	};
+
+	mcbsp1_gfclk: mcbsp1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0548>;
+	};
+
+	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0550>;
+	};
+
+	mcbsp2_gfclk: mcbsp2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0558>;
+	};
+
+	mcbsp3_gfclk: mcbsp3_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	timer5_gfclk_mux: timer5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer6_gfclk_mux: timer6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	timer7_gfclk_mux: timer7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0578>;
+	};
+
+	timer8_gfclk_mux: timer8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm_clocks {
+	sys_clkin: sys_clkin {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dss_syc_gfclk_div: dss_syc_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1938>;
+	};
+
+	timer1_gfclk_mux: timer1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1940>;
+	};
+};
+&cm_core_clocks {
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_unipro1_ck: dpll_unipro1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro1_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro1_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_unipro2_ck: dpll_unipro2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
+	};
+
+	dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro2_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01d0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	dss_32khz_clk: dss_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1420>;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1420>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_h12x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1420>;
+	};
+
+	dss_sys_clk: dss_sys_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dss_syc_gfclk_div>;
+		ti,bit-shift = <10>;
+		reg = <0x1420>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1060>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1068>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1070>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1078>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1080>;
+	};
+
+	gpio7_dbclk: gpio7_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1110>;
+	};
+
+	gpio8_dbclk: gpio8_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1118>;
+	};
+
+	iss_ctrlclk: iss_ctrlclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1320>;
+	};
+
+	lli_txphy_clk: lli_txphy_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x0f20>;
+	};
+
+	lli_txphy_ls_clk: lli_txphy_ls_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_m2_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0f20>;
+	};
+
+	mmc1_32khz_clk: mmc1_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1628>;
+	};
+
+	sata_ref_clk: sata_ref_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin>;
+		ti,bit-shift = <8>;
+		reg = <0x1688>;
+	};
+
+	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <11>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <12>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <6>;
+		reg = <0x1658>;
+	};
+
+	utmi_p1_gfclk: utmi_p1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3init_60m_fclk>, <&xclk60mhsp1_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p1_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1658>;
+	};
+
+	utmi_p2_gfclk: utmi_p2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3init_60m_fclk>, <&xclk60mhsp2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p2_gfclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1658>;
+	};
+
+	usb_otg_ss_refclk960m: usb_otg_ss_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x16f0>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1668>;
+	};
+
+	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1668>;
+	};
+
+	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1668>;
+	};
+
+	fdif_fclk: fdif_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1328>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1520>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1520>;
+	};
+
+	hsi_fclk: hsi_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1638>;
+	};
+
+	mmc1_fclk_mux: mmc1_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1628>;
+	};
+
+	mmc1_fclk: mmc1_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc1_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <2>;
+		reg = <0x1628>;
+	};
+
+	mmc2_fclk_mux: mmc2_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1630>;
+	};
+
+	mmc2_fclk: mmc2_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc2_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <2>;
+		reg = <0x1630>;
+	};
+
+	timer10_gfclk_mux: timer10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1028>;
+	};
+
+	timer11_gfclk_mux: timer11_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1030>;
+	};
+
+	timer2_gfclk_mux: timer2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1038>;
+	};
+
+	timer3_gfclk_mux: timer3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1040>;
+	};
+
+	timer4_gfclk_mux: timer4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1048>;
+	};
+
+	timer9_gfclk_mux: timer9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1050>;
+	};
+};
+
+&cm_core_clockdomains {
+	l3init_clkdm: l3init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
+
+&scrm_clocks {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+};
-- 
1.7.9.5

[PATCHv11 31/49] ARM: dts: dra7 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the DRA7 power,
reset and clock manager (PRCM).

TODO: apll_pcie clock node is still a dummy in this version, and
proper support for the APLL should be added.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi          |   41 +
 arch/arm/boot/dts/dra7xx-clocks.dtsi | 1985 ++++++++++++++++++++++++++++++++++
 2 files changed, 2026 insertions(+)
 create mode 100644 arch/arm/boot/dts/dra7xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d0df4c4..1fd75aa 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -104,6 +104,45 @@
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
+		prm: prm@4ae06000 {
+			compatible = "ti,dra7-prm";
+			reg = <0x4ae06000 0x3000>;
+
+			prm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prm_clockdomains: clockdomains {
+			};
+		};
+
+		cm_core_aon: cm_core_aon@4a005000 {
+			compatible = "ti,dra7-cm-core-aon";
+			reg = <0x4a005000 0x2000>;
+
+			cm_core_aon_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_core_aon_clockdomains: clockdomains {
+			};
+		};
+
+		cm_core: cm_core@4a008000 {
+			compatible = "ti,dra7-cm-core";
+			reg = <0x4a008000 0x3000>;
+
+			cm_core_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_core_clockdomains: clockdomains {
+			};
+		};
+
 		counter32k: counter@4ae04000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4ae04000 0x40>;
@@ -584,3 +623,5 @@
 		};
 	};
 };
+
+/include/ "dra7xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
new file mode 100644
index 0000000..32df847
--- /dev/null
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -0,0 +1,1985 @@
+/*
+ * Device Tree Source for DRA7xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_core_aon_clocks {
+	atl_clkin0_ck: atl_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	atl_clkin1_ck: atl_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	atl_clkin2_ck: atl_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	atlclkin3_ck: atlclkin3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	hdmi_clkin_ck: hdmi_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlb_clkin_ck: mlb_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlbp_clkin_ck: mlbp_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	ref_clkin0_ck: ref_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin1_ck: ref_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin2_ck: ref_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin3_ck: ref_clkin3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	rmii_clk_ck: rmii_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	sdvenc_clkin_ck: sdvenc_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_20000000_ck: virt_20000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	sys_clkin2: sys_clkin2 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <22579200>;
+	};
+
+	usb_otg_clkin_ck: usb_otg_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_clkin_ck: video1_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_m2_clkin_ck: video1_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_clkin_ck: video2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_m2_clkin_ck: video2_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dclk_div: mpu_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_dsp_ck: dpll_dsp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
+	};
+
+	dpll_dsp_m2_ck: dpll_dsp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0244>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_m2_ck: dpll_iva_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_dclk: iva_dclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_iva_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_gpu_ck: dpll_gpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
+	};
+
+	dpll_gpu_m2_ck: dpll_gpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02e8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0220>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_ck: dpll_gmac_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
+	};
+
+	dpll_gmac_m2_ck: dpll_gmac_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	video2_dclk_div: video2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_dclk_div: video1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_dclk_div: hdmi_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_eve_ck: dpll_eve_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
+	};
+
+	dpll_eve_m2_ck: dpll_eve_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_eve_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0294>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	eve_dclk_div: eve_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_eve_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0228>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_dsp_ck>;
+	};
+
+	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0248>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_gmac_ck>;
+	};
+
+	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	gmii_m_clk_div: gmii_m_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_gmac_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hdmi_clk2_div: hdmi_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_div_clk: hdmi_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_iclk_div: l3_iclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_root_clk_div: l4_root_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_clk2_div: video1_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_div_clk: video1_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_clk2_div: video2_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_div_clk: video2_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ipu1_gfclk_mux: ipu1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0520>;
+	};
+
+	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x0550>;
+	};
+
+	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x0550>;
+	};
+
+	timer5_gfclk_mux: timer5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	timer6_gfclk_mux: timer6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0560>;
+	};
+
+	timer7_gfclk_mux: timer7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer8_gfclk_mux: timer8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	uart6_gfclk_mux: uart6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm_clocks {
+	sys_clkin1: sys_clkin1 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0118>;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x0114>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x011c>;
+		ti,dividers = <8>, <16>;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		reg = <0x0178>;
+		ti,max-div = <2>;
+	};
+
+	abe_giclk_div: abe_giclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		reg = <0x0174>;
+		ti,max-div = <2>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x01d8>;
+		ti,dividers = <16>, <32>;
+	};
+
+	abe_sys_clk_div: abe_sys_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0120>;
+		ti,max-div = <2>;
+	};
+
+	adc_gfclk_mux: adc_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
+		reg = <0x01dc>;
+	};
+
+	sys_clk1_dclk_div: sys_clk1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c8>;
+		ti,index-power-of-two;
+	};
+
+	sys_clk2_dclk_div: sys_clk2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin2>;
+		ti,max-div = <64>;
+		reg = <0x01cc>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_dclk_div: per_abe_x1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01bc>;
+		ti,index-power-of-two;
+	};
+
+	dsp_gclk_div: dsp_gclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x018c>;
+		ti,index-power-of-two;
+	};
+
+	gpu_dclk: gpu_dclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01a0>;
+		ti,index-power-of-two;
+	};
+
+	emif_phy_dclk_div: emif_phy_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0190>;
+		ti,index-power-of-two;
+	};
+
+	gmac_250m_dclk_div: gmac_250m_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	l3init_480m_dclk_div: l3init_480m_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01ac>;
+		ti,index-power-of-two;
+	};
+
+	usb_otg_dclk_div: usb_otg_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&usb_otg_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0184>;
+		ti,index-power-of-two;
+	};
+
+	sata_dclk_div: sata_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c0>;
+		ti,index-power-of-two;
+	};
+
+	pcie2_dclk_div: pcie2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b8>;
+		ti,index-power-of-two;
+	};
+
+	pcie_dclk_div: pcie_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b4>;
+		ti,index-power-of-two;
+	};
+
+	emu_dclk_div: emu_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x0194>;
+		ti,index-power-of-two;
+	};
+
+	secure_32k_dclk_div: secure_32k_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&secure_32k_clk_src_ck>;
+		ti,max-div = <64>;
+		reg = <0x01c4>;
+		ti,index-power-of-two;
+	};
+
+	clkoutmux0_clk_mux: clkoutmux0_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0158>;
+	};
+
+	clkoutmux1_clk_mux: clkoutmux1_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x015c>;
+	};
+
+	clkoutmux2_clk_mux: clkoutmux2_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0160>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	eve_clk: eve_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
+		reg = <0x0180>;
+	};
+
+	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x01a4>;
+	};
+
+	mlb_clk: mlb_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlb_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0134>;
+		ti,index-power-of-two;
+	};
+
+	mlbp_clk: mlbp_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlbp_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0130>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0138>;
+		ti,index-power-of-two;
+	};
+
+	timer_sys_clk_div: timer_sys_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0144>;
+		ti,max-div = <2>;
+	};
+
+	video1_dpll_clk_mux: video1_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x01d0>;
+	};
+
+	video2_dpll_clk_mux: video2_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x01d4>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1838>;
+	};
+
+	dcan1_sys_clk_mux: dcan1_sys_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		ti,bit-shift = <24>;
+		reg = <0x1888>;
+	};
+
+	timer1_gfclk_mux: timer1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	uart10_gfclk_mux: uart10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1880>;
+	};
+};
+&cm_core_clocks {
+	dpll_pcie_ref_ck: dpll_pcie_ref_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin1>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	apll_pcie_ck: apll_pcie_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_ck>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_m2_ck: apll_pcie_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0224>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h13x2_ck: dpll_per_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	dss_32khz_clk: dss_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1120>;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1120>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_h12x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1120>;
+	};
+
+	dss_hdmi_clk: dss_hdmi_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&hdmi_dpll_clk_mux>;
+		ti,bit-shift = <10>;
+		reg = <0x1120>;
+	};
+
+	dss_video1_clk: dss_video1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&video1_dpll_clk_mux>;
+		ti,bit-shift = <12>;
+		reg = <0x1120>;
+	};
+
+	dss_video2_clk: dss_video2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&video2_dpll_clk_mux>;
+		ti,bit-shift = <13>;
+		reg = <0x1120>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1760>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1768>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1770>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1778>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1780>;
+	};
+
+	gpio7_dbclk: gpio7_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1810>;
+	};
+
+	gpio8_dbclk: gpio8_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1818>;
+	};
+
+	mmc1_clk32k: mmc1_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1328>;
+	};
+
+	mmc2_clk32k: mmc2_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1330>;
+	};
+
+	mmc3_clk32k: mmc3_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1820>;
+	};
+
+	mmc4_clk32k: mmc4_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1828>;
+	};
+
+	sata_ref_clk: sata_ref_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin1>;
+		ti,bit-shift = <8>;
+		reg = <0x1388>;
+	};
+
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x13f0>;
+	};
+
+	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x1340>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0688>;
+	};
+
+	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0698>;
+	};
+
+	atl_dpll_clk_mux: atl_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0c00>;
+	};
+
+	atl_gfclk_mux: atl_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>;
+		ti,bit-shift = <26>;
+		reg = <0x0c00>;
+	};
+
+	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_m2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x13d0>;
+		ti,dividers = <2>;
+	};
+
+	gmac_rft_clk_mux: gmac_rft_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>;
+		ti,bit-shift = <25>;
+		reg = <0x13d0>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1220>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x1220>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0e50>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x1860>;
+	};
+
+	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x1860>;
+	};
+
+	mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1860>;
+	};
+
+	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1868>;
+	};
+
+	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1868>;
+	};
+
+	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1898>;
+	};
+
+	mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1898>;
+	};
+
+	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1878>;
+	};
+
+	mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1878>;
+	};
+
+	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1904>;
+	};
+
+	mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1904>;
+	};
+
+	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1908>;
+	};
+
+	mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1908>;
+	};
+
+	mcasp8_ahclk_mux: mcasp8_ahclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <22>;
+		reg = <0x1890>;
+	};
+
+	mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <24>;
+		reg = <0x1890>;
+	};
+
+	mmc1_fclk_mux: mmc1_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1328>;
+	};
+
+	mmc1_fclk_div: mmc1_fclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc1_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1328>;
+		ti,index-power-of-two;
+	};
+
+	mmc2_fclk_mux: mmc2_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1330>;
+	};
+
+	mmc2_fclk_div: mmc2_fclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc2_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1330>;
+		ti,index-power-of-two;
+	};
+
+	mmc3_gfclk_mux: mmc3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1820>;
+	};
+
+	mmc3_gfclk_div: mmc3_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc3_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1820>;
+		ti,index-power-of-two;
+	};
+
+	mmc4_gfclk_mux: mmc4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1828>;
+	};
+
+	mmc4_gfclk_div: mmc4_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc4_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1828>;
+		ti,index-power-of-two;
+	};
+
+	qspi_gfclk_mux: qspi_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1838>;
+	};
+
+	qspi_gfclk_div: qspi_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&qspi_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1838>;
+		ti,index-power-of-two;
+	};
+
+	timer10_gfclk_mux: timer10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1728>;
+	};
+
+	timer11_gfclk_mux: timer11_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1730>;
+	};
+
+	timer13_gfclk_mux: timer13_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17c8>;
+	};
+
+	timer14_gfclk_mux: timer14_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17d0>;
+	};
+
+	timer15_gfclk_mux: timer15_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17d8>;
+	};
+
+	timer16_gfclk_mux: timer16_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1830>;
+	};
+
+	timer2_gfclk_mux: timer2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1738>;
+	};
+
+	timer3_gfclk_mux: timer3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1740>;
+	};
+
+	timer4_gfclk_mux: timer4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1748>;
+	};
+
+	timer9_gfclk_mux: timer9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1750>;
+	};
+
+	uart1_gfclk_mux: uart1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	uart2_gfclk_mux: uart2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1848>;
+	};
+
+	uart3_gfclk_mux: uart3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1850>;
+	};
+
+	uart4_gfclk_mux: uart4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1858>;
+	};
+
+	uart5_gfclk_mux: uart5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1870>;
+	};
+
+	uart7_gfclk_mux: uart7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18d0>;
+	};
+
+	uart8_gfclk_mux: uart8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18e0>;
+	};
+
+	uart9_gfclk_mux: uart9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18e8>;
+	};
+
+	vip1_gclk_mux: vip1_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1020>;
+	};
+
+	vip2_gclk_mux: vip2_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1028>;
+	};
+
+	vip3_gclk_mux: vip3_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1030>;
+	};
+};
+
+&cm_core_clockdomains {
+	coreaon_clkdm: coreaon_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
-- 
1.7.9.5

[PATCHv11 32/49] ARM: dts: clk: Add apll related clocks

[Tero Kristo]

From: J Keerthy <j-keerthy@ti.com>

The patch adds a mux node to choose the parent of apll_pcie_ck node.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 32df847..d4e7410 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1150,11 +1150,19 @@
 		ti,invert-autoidle-bit;
 	};
 
+	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_pcie_ref_ck>, <&pciesref_acs_clk_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c 0x4>;
+		ti,bit-shift = <7>;
+	};
+
 	apll_pcie_ck: apll_pcie_ck {
 		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_ck>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+		compatible = "ti,dra7-apll-clock";
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x021c>, <0x0220>;
 	};
 
 	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
-- 
1.7.9.5

[PATCHv11 33/49] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock

[Tero Kristo]

From: J Keerthy <j-keerthy@ti.com>

This patch changes apll_pcie_m2_ck to fixed factor
clock as there are no configurable divider associated to m2.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index d4e7410..d616359 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1183,13 +1183,10 @@
 
 	apll_pcie_m2_ck: apll_pcie_m2_ck {
 		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
+		compatible = "fixed-factor-clock";
 		clocks = <&apll_pcie_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0224>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
+		clock-mult = <1>;
+		clock-div = <1>;
 	};
 
 	dpll_per_ck: dpll_per_ck {
-- 
1.7.9.5

[PATCHv11 34/49] ARM: dts: DRA7: Add PCIe related clock nodes

[Tero Kristo]

From: J Keerthy <j-keerthy@ti.com>

This patch adds optfclk_pciephy_clk and optfclk_pciephy_div_clk
which are used by PCIe phy. It also adds a mux clock to choose
the source of optfclk_pciephy_div_clk clock.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi |   25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index d616359..e96da9a 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1165,6 +1165,31 @@
 		reg = <0x021c>, <0x0220>;
 	};
 
+	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+	};
+
+	optfclk_pciephy_clk: optfclk_pciephy_clk@4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <9>;
+	};
+
+	optfclk_pciephy_div_clk: optfclk_pciephy_div_clk@4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&optfclk_pciephy_div>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <10>;
+	};
+
 	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
-- 
1.7.9.5

[PATCHv11 35/49] ARM: dts: am33xx clock data

[Tero Kristo]

This patch creates a unique node for each clock in the AM33xx power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am33xx-clocks.dtsi |  664 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am33xx.dtsi        |   28 ++
 2 files changed, 692 insertions(+)
 create mode 100644 arch/arm/boot/dts/am33xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
new file mode 100644
index 0000000..9ccfe50
--- /dev/null
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -0,0 +1,664 @@
+/*
+ * Device Tree Source for AM33xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm_clocks {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	rng_fck: rng_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ehrpwm0_gate_tbclk>;
+	};
+
+	ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ehrpwm1_gate_tbclk>;
+	};
+
+	ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ehrpwm2_gate_tbclk>;
+	};
+};
+&prcm_clocks {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0490>, <0x045c>, <0x0468>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0480>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0484>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x04d8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0488>, <0x0420>, <0x042c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0494>, <0x0434>, <0x0440>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0498>, <0x0448>, <0x0454>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a4>;
+		ti,index-starts-at-one;
+		ti,set-rate-parent;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x048c>, <0x0470>, <0x049c>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x04ac>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	cefuse_fck: cefuse_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0a20>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	clkdiv32k_ick: clkdiv32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x014c>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
+		reg = <0x0530>;
+	};
+
+	mmu_fck: mmu_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0914>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
+		reg = <0x0528>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0508>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x050c>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0510>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0518>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x051c>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0504>;
+	};
+
+	usbotg_fck: usbotg_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x047c>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ieee5000_fck: ieee5000_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x00e4>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		reg = <0x0538>;
+	};
+
+	l4_rtc_gclk: l4_rtc_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4fw_gclk: l4fw_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sysclk_div_ck: sysclk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
+		reg = <0x0520>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
+		reg = <0x053c>;
+	};
+
+	gpio0_dbclk: gpio0_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&gpio0_dbclk_mux_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0408>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00ac>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00b0>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00b4>;
+	};
+
+	lcd_gclk: lcd_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x0534>;
+		ti,set-rate-parent;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x052c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x052c>;
+		ti,max-div = <2>;
+	};
+
+	sysclkout_pre_ck: sysclkout_pre_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
+		reg = <0x0700>;
+	};
+
+	clkout2_div_ck: clkout2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sysclkout_pre_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <8>;
+		reg = <0x0700>;
+	};
+
+	dbg_sysclk_ck: dbg_sysclk_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0414>;
+	};
+
+	dbg_clka_ck: dbg_clka_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_ck>;
+		ti,bit-shift = <30>;
+		reg = <0x0414>;
+	};
+
+	stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0414>;
+	};
+
+	trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0414>;
+	};
+
+	stm_clk_div_ck: stm_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&stm_pmd_clock_mux_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <64>;
+		reg = <0x0414>;
+		ti,index-power-of-two;
+	};
+
+	trace_clk_div_ck: trace_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&trace_pmd_clk_mux_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <64>;
+		reg = <0x0414>;
+		ti,index-power-of-two;
+	};
+
+	clkout2_ck: clkout2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout2_div_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0700>;
+	};
+};
+
+&prcm_clockdomains {
+	clk_24mhz_clkdm: clk_24mhz_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&clkdiv32k_ick>;
+	};
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index f6d8ffe..6d95d3d 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -102,6 +102,32 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		prcm: prcm@44e00000 {
+			compatible = "ti,am3-prcm";
+			reg = <0x44e00000 0x4000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@44e10000 {
+			compatible = "ti,am3-scrm";
+			reg = <0x44e10000 0x2000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
 		intc: interrupt-controller@48200000 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -794,3 +820,5 @@
 		};
 	};
 };
+
+/include/ "am33xx-clocks.dtsi"
-- 
1.7.9.5

[PATCHv11 36/49] ARM: dts: omap3 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the OMAP3 power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am35xx-clocks.dtsi               |  128 ++
 arch/arm/boot/dts/omap3.dtsi                       |   41 +
 arch/arm/boot/dts/omap3430es1-clocks.dtsi          |  208 +++
 arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi    |  268 ++++
 arch/arm/boot/dts/omap34xx.dtsi                    |    4 +
 .../omap36xx-am35xx-omap3430es2plus-clocks.dtsi    |  242 +++
 arch/arm/boot/dts/omap36xx-clocks.dtsi             |   90 ++
 .../boot/dts/omap36xx-omap3430es2plus-clocks.dtsi  |  198 +++
 arch/arm/boot/dts/omap36xx.dtsi                    |    5 +
 arch/arm/boot/dts/omap3xxx-clocks.dtsi             | 1660 ++++++++++++++++++++
 10 files changed, 2844 insertions(+)
 create mode 100644 arch/arm/boot/dts/am35xx-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap3430es1-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap36xx-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap3xxx-clocks.dtsi

diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
new file mode 100644
index 0000000..df489d3
--- /dev/null
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -0,0 +1,128 @@
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm_clocks {
+	emac_ick: emac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <1>;
+	};
+
+	emac_fck: emac_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&rmii_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <9>;
+	};
+
+	vpfe_ick: vpfe_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <2>;
+	};
+
+	vpfe_fck: vpfe_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pclk_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <10>;
+	};
+
+	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <0>;
+	};
+
+	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <8>;
+	};
+
+	hecc_ck: hecc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <3>;
+	};
+};
+&cm_clocks {
+	ipss_ick: ipss_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	rmii_ck: rmii_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	pclk_ck: pclk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	uart4_ick_am35xx: uart4_ick_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	uart4_fck_am35xx: uart4_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
+			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
+			 <&hecc_ck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index daabf99..07c7341 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -89,6 +89,45 @@
 			interrupts = <0>;
 		};
 
+		prm: prm@48306000 {
+			compatible = "ti,omap3-prm";
+			reg = <0x48306000 0x4000>;
+
+			prm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prm_clockdomains: clockdomains {
+			};
+		};
+
+		cm: cm@48004000 {
+			compatible = "ti,omap3-cm";
+			reg = <0x48004000 0x4000>;
+
+			cm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@48002000 {
+			compatible = "ti,omap3-scrm";
+			reg = <0x48002000 0x2000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
 		counter32k: counter@48320000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x48320000 0x20>;
@@ -632,3 +671,5 @@
 		};
 	};
 };
+
+/include/ "omap3xxx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
new file mode 100644
index 0000000..02f6c7f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
@@ -0,0 +1,208 @@
+/*
+ * Device Tree Source for OMAP3430 ES1 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_clocks {
+	gfx_l3_ck: gfx_l3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0b10>;
+		ti,bit-shift = <0>;
+	};
+
+	gfx_l3_fck: gfx_l3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_ick>;
+		ti,max-div = <7>;
+		reg = <0x0b40>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_l3_ick: gfx_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&gfx_l3_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gfx_cg1_ck: gfx_cg1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&gfx_l3_fck>;
+		reg = <0x0b00>;
+		ti,bit-shift = <1>;
+	};
+
+	gfx_cg2_ck: gfx_cg2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&gfx_l3_fck>;
+		reg = <0x0b00>;
+		ti,bit-shift = <2>;
+	};
+
+	d2d_26m_fck: d2d_26m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <3>;
+	};
+
+	fshostusb_fck: fshostusb_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <5>;
+	};
+
+	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0a00>;
+	};
+
+	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <8>;
+		reg = <0x0a40>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	};
+
+	ssi_ssr_fck_3430es1: ssi_ssr_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
+	};
+
+	ssi_sst_fck_3430es1: ssi_sst_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&ssi_ssr_fck_3430es1>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	fac_ick: fac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <8>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ssi_ick_3430es1: ssi_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <0>;
+	};
+
+	usb_l4_gate_ick: usb_l4_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <5>;
+		reg = <0x0a10>;
+	};
+
+	usb_l4_div_ick: usb_l4_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <4>;
+		ti,max-div = <1>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	usb_l4_ick: usb_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+	};
+
+	dss1_alwon_fck_3430es1: dss1_alwon_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0e00>;
+		ti,set-rate-parent;
+	};
+
+	dss_ick_3430es1: dss_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0e10>;
+		ti,bit-shift = <0>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es1>;
+	};
+
+	gfx_3430es1_clkdm: gfx_3430es1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_l3_ck>, <&gfx_cg1_ck>, <&gfx_cg2_ck>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+			 <&dss1_alwon_fck_3430es1>, <&dss_ick_3430es1>;
+	};
+
+	d2d_clkdm: d2d_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&d2d_26m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&fshostusb_fck>, <&fac_ick>, <&ssi_ick_3430es1>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
new file mode 100644
index 0000000..b02017b
--- /dev/null
+++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
@@ -0,0 +1,268 @@
+/*
+ * Device Tree Source for OMAP34XX/OMAP36XX clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_clocks {
+	security_l4_ick2: security_l4_ick2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes1_ick: aes1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		ti,bit-shift = <3>;
+		reg = <0x0a14>;
+	};
+
+	rng_ick: rng_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <2>;
+	};
+
+	sha11_ick: sha11_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <1>;
+	};
+
+	des1_ick: des1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <0>;
+	};
+
+	cam_mclk: cam_mclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0f00>;
+		ti,set-rate-parent;
+	};
+
+	cam_ick: cam_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0f10>;
+		ti,bit-shift = <0>;
+	};
+
+	csi2_96m_fck: csi2_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0f00>;
+		ti,bit-shift = <1>;
+	};
+
+	security_l3_ick: security_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pka_ick: pka_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l3_ick>;
+		reg = <0x0a14>;
+		ti,bit-shift = <4>;
+	};
+
+	icr_ick: icr_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <29>;
+	};
+
+	des2_ick: des2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <26>;
+	};
+
+	mspro_ick: mspro_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	mailboxes_ick: mailboxes_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <7>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sr1_fck: sr1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <6>;
+	};
+
+	sr2_fck: sr2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <7>;
+	};
+
+	sr_l4_ick: sr_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll2_fck: dpll2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0040>;
+		ti,index-starts-at-one;
+	};
+
+	dpll2_ck: dpll2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll2_fck>;
+		reg = <0x0004>, <0x0024>, <0x0040>, <0x0034>;
+		ti,low-power-stop;
+		ti,lock;
+		ti,low-power-bypass;
+	};
+
+	dpll2_m2_ck: dpll2_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0044>;
+		ti,index-starts-at-one;
+	};
+
+	iva2_ck: iva2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll2_m2_ck>;
+		reg = <0x0000>;
+		ti,bit-shift = <0>;
+	};
+
+	modem_fck: modem_fck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <31>;
+	};
+
+	sad2d_ick: sad2d_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <3>;
+	};
+
+	mad2d_ick: mad2d_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <3>;
+	};
+
+	mspro_fck: mspro_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+};
+
+&cm_clockdomains {
+	cam_clkdm: cam_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_ick>, <&csi2_96m_fck>;
+	};
+
+	iva2_clkdm: iva2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&iva2_ck>;
+	};
+
+	dpll2_clkdm: dpll2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll2_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&sr1_fck>, <&sr2_fck>;
+	};
+
+	d2d_clkdm: d2d_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&modem_fck>, <&sad2d_ick>, <&mad2d_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>,
+			 <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>,
+			 <&mspro_fck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 5355d61..d531abf 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -26,3 +26,7 @@
 		};
 	};
 };
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 0000000..af9ae534
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,242 @@
+/*
+ * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm_clocks {
+	corex2_d3_fck: corex2_d3_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	corex2_d5_fck: corex2_d5_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <5>;
+	};
+};
+&cm_clocks {
+	dpll5_ck: dpll5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d04>, <0x0d24>, <0x0d4c>, <0x0d34>;
+		ti,low-power-stop;
+		ti,lock;
+	};
+
+	dpll5_m2_ck: dpll5_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll5_ck>;
+		ti,max-div = <31>;
+		reg = <0x0d50>;
+		ti,index-starts-at-one;
+	};
+
+	sgx_gate_fck: sgx_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0b00>;
+	};
+
+	core_d3_ck: core_d3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	core_d4_ck: core_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	core_d6_ck: core_d6_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	omap_192m_alwon_fck: omap_192m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_d2_ck: core_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	sgx_mux_fck: sgx_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>;
+		reg = <0x0b40>;
+	};
+
+	sgx_fck: sgx_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sgx_gate_fck>, <&sgx_mux_fck>;
+	};
+
+	sgx_ick: sgx_ick {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0b10>;
+		ti,bit-shift = <0>;
+	};
+
+	cpefuse_fck: cpefuse_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <0>;
+	};
+
+	ts_fck: ts_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_32k_fck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <1>;
+	};
+
+	usbtll_fck: usbtll_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <2>;
+	};
+
+	usbtll_ick: usbtll_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <2>;
+	};
+
+	mmchs3_ick: mmchs3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <30>;
+	};
+
+	mmchs3_fck: mmchs3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <30>;
+	};
+
+	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0e00>;
+		ti,set-rate-parent;
+	};
+
+	dss_ick_3430es2: dss_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0e10>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_120m_fck: usbhost_120m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x1400>;
+		ti,bit-shift = <1>;
+	};
+
+	usbhost_48m_fck: usbhost_48m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&omap_48m_fck>;
+		reg = <0x1400>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_ick: usbhost_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x1410>;
+		ti,bit-shift = <0>;
+	};
+};
+
+&cm_clockdomains {
+	dpll5_clkdm: dpll5_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll5_ck>;
+	};
+
+	sgx_clkdm: sgx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sgx_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+			 <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>;
+	};
+
+	usbhost_clkdm: usbhost_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&usbhost_120m_fck>, <&usbhost_48m_fck>,
+			 <&usbhost_ick>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
new file mode 100644
index 0000000..2fcf253
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -0,0 +1,90 @@
+/*
+ * Device Tree Source for OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_clocks {
+	dpll4_ck: dpll4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-j-type-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-rate-parent;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	uart4_fck: uart4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <18>;
+	};
+};
+
+&cm_clockdomains {
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>, <&uart4_fck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 0000000..8ed475d
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,198 @@
+/*
+ * Device Tree Source for OMAP34xx/OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_clocks {
+	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0a00>;
+	};
+
+	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <8>;
+		reg = <0x0a40>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	};
+
+	ssi_ssr_fck_3430es2: ssi_ssr_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
+	};
+
+	ssi_sst_fck_3430es2: ssi_sst_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&ssi_ssr_fck_3430es2>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-hsotgusb-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ssi_ick_3430es2: ssi_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-ssi-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <0>;
+	};
+
+	usim_gate_fck: usim_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&omap_96m_fck>;
+		ti,bit-shift = <9>;
+		reg = <0x0c00>;
+	};
+
+	sys_d2_ck: sys_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d2_fck: omap_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d4_fck: omap_96m_d4_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	omap_96m_d8_fck: omap_96m_d8_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	omap_96m_d10_fck: omap_96m_d10_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll5_m2_d4_ck: dpll5_m2_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll5_m2_d8_ck: dpll5_m2_d8_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	dpll5_m2_d16_ck: dpll5_m2_d16_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll5_m2_d20_ck: dpll5_m2_d20_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <20>;
+	};
+
+	usim_mux_fck: usim_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	usim_fck: usim_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
+	};
+
+	usim_ick: usim_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <9>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es2>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&usim_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&ssi_ick_3430es2>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 380c22e..55ebaaa 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -40,3 +40,8 @@
 		};
 	};
 };
+
+/include/ "omap36xx-clocks.dtsi"
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
new file mode 100644
index 0000000..cb04d4b
--- /dev/null
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -0,0 +1,1660 @@
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm_clocks {
+	virt_16_8m_ck: virt_16_8m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	osc_sys_ck: osc_sys_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
+		reg = <0x0d40>;
+	};
+
+	sys_ck: sys_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&osc_sys_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1270>;
+		ti,index-starts-at-one;
+	};
+
+	sys_clkout1: sys_clkout1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&osc_sys_ck>;
+		reg = <0x0d70>;
+		ti,bit-shift = <7>;
+	};
+
+	dpll3_x2_ck: dpll3_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m2x2_ck: dpll3_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_x2_ck: dpll4_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	corex2_fck: corex2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkup_l4_ick: wkup_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+&scrm_clocks {
+	mcbsp5_mux_fck: mcbsp5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp5_fck: mcbsp5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+	};
+
+	mcbsp1_mux_fck: mcbsp1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x0274>;
+	};
+
+	mcbsp1_fck: mcbsp1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+	};
+
+	mcbsp2_mux_fck: mcbsp2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <6>;
+		reg = <0x0274>;
+	};
+
+	mcbsp2_fck: mcbsp2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+	};
+
+	mcbsp3_mux_fck: mcbsp3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp3_fck: mcbsp3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+	};
+
+	mcbsp4_mux_fck: mcbsp4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp4_fck: mcbsp4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+	};
+};
+&cm_clocks {
+	dummy_apb_pclk: dummy_apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	omap_32k_fck: omap_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12m_ck: virt_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13m_ck: virt_13m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_38_4m_ck: virt_38_4m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	dpll4_ck: dpll4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m2_ck: dpll4_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0d48>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_96m_alwon_fck: omap_96m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll3_ck: dpll3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
+	};
+
+	dpll3_m3_ck: dpll3_m3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <31>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_core_alwon_ck: emu_core_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sys_altclk: sys_altclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	mcbsp_clks: mcbsp_clks {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	dpll3_m2_ck: dpll3_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <31>;
+		reg = <0x0d40>;
+		ti,index-starts-at-one;
+	};
+
+	core_ck: core_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll1_fck: dpll1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0940>;
+		ti,index-starts-at-one;
+	};
+
+	dpll1_ck: dpll1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll1_fck>;
+		reg = <0x0904>, <0x0924>, <0x0940>, <0x0934>;
+	};
+
+	dpll1_x2_ck: dpll1_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll1_x2m2_ck: dpll1_x2m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll1_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0944>;
+		ti,index-starts-at-one;
+	};
+
+	cm_96m_fck: cm_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	omap_96m_fck: omap_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0d40>;
+	};
+
+	dpll4_m3_ck: dpll4_m3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_54m_fck: omap_54m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
+		ti,bit-shift = <5>;
+		reg = <0x0d40>;
+	};
+
+	cm_96m_d2_fck: cm_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cm_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_48m_fck: omap_48m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
+		ti,bit-shift = <3>;
+		reg = <0x0d40>;
+	};
+
+	omap_12m_fck: omap_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll4_m4_ck: dpll4_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <32>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m4_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m4x2_ck: dpll4_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m4x2_mul_ck>;
+		ti,bit-shift = <0x1d>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m5_ck: dpll4_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0f40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m5_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m6_ck: dpll4_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <63>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_per_alwon_ck: emu_per_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	clkout2_src_gate_ck: clkout2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_mux_ck: clkout2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_ck: clkout2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
+	};
+
+	sys_clkout2: sys_clkout2 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout2_src_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <64>;
+		reg = <0x0d70>;
+		ti,index-power-of-two;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_x2m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	arm_fck: arm_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mpu_ck>;
+		reg = <0x0924>;
+		ti,max-div = <2>;
+	};
+
+	emu_mpu_alwon_ck: emu_mpu_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_ick: l3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	l4_ick: l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_ick>;
+		ti,bit-shift = <2>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	rm_ick: rm_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <1>;
+		ti,max-div = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	gpt10_gate_fck: gpt10_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0a00>;
+	};
+
+	gpt10_mux_fck: gpt10_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0a40>;
+	};
+
+	gpt10_fck: gpt10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+	};
+
+	gpt11_gate_fck: gpt11_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0a00>;
+	};
+
+	gpt11_mux_fck: gpt11_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0a40>;
+	};
+
+	gpt11_fck: gpt11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+	};
+
+	core_96m_fck: core_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_fck: mmchs2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_fck: mmchs1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <24>;
+	};
+
+	i2c3_fck: i2c3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_fck: i2c2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_fck: i2c1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <15>;
+	};
+
+	mcbsp5_gate_fck: mcbsp5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <10>;
+		reg = <0x0a00>;
+	};
+
+	mcbsp1_gate_fck: mcbsp1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <9>;
+		reg = <0x0a00>;
+	};
+
+	core_48m_fck: core_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcspi4_fck: mcspi4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_fck: mcspi3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_fck: mcspi2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_fck: mcspi1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <18>;
+	};
+
+	uart2_fck: uart2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_fck: uart1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <13>;
+	};
+
+	core_12m_fck: core_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_12m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdq_fck: hdq_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_12m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <22>;
+	};
+
+	core_l3_ick: core_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sdrc_ick: sdrc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpmc_fck: gpmc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_l4_ick: core_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_ick: mmchs2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_ick: mmchs1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <24>;
+	};
+
+	hdq_ick: hdq_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <22>;
+	};
+
+	mcspi4_ick: mcspi4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_ick: mcspi3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_ick: mcspi2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_ick: mcspi1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <18>;
+	};
+
+	i2c3_ick: i2c3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_ick: i2c2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_ick: i2c1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <15>;
+	};
+
+	uart2_ick: uart2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_ick: uart1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <13>;
+	};
+
+	gpt11_ick: gpt11_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <12>;
+	};
+
+	gpt10_ick: gpt10_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <11>;
+	};
+
+	mcbsp5_ick: mcbsp5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <10>;
+	};
+
+	mcbsp1_ick: mcbsp1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <9>;
+	};
+
+	omapctrl_ick: omapctrl_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <6>;
+	};
+
+	dss_tv_fck: dss_tv_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_54m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss_96m_fck: dss_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_96m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss2_alwon_fck: dss2_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <1>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	gpt1_gate_fck: gpt1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0c00>;
+	};
+
+	gpt1_mux_fck: gpt1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x0c40>;
+	};
+
+	gpt1_fck: gpt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+	};
+
+	aes2_ick: aes2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		ti,bit-shift = <28>;
+		reg = <0x0a10>;
+	};
+
+	wkup_32k_fck: wkup_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio1_dbck: gpio1_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <3>;
+	};
+
+	sha12_ick: sha12_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <27>;
+	};
+
+	wdt2_fck: wdt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt2_ick: wdt2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt1_ick: wdt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <4>;
+	};
+
+	gpio1_ick: gpio1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <3>;
+	};
+
+	omap_32ksync_ick: omap_32ksync_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <2>;
+	};
+
+	gpt12_ick: gpt12_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpt1_ick: gpt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <0>;
+	};
+
+	per_96m_fck: per_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_48m_fck: per_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	uart3_fck: uart3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <11>;
+	};
+
+	gpt2_gate_fck: gpt2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1000>;
+	};
+
+	gpt2_mux_fck: gpt2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x1040>;
+	};
+
+	gpt2_fck: gpt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+	};
+
+	gpt3_gate_fck: gpt3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1000>;
+	};
+
+	gpt3_mux_fck: gpt3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x1040>;
+	};
+
+	gpt3_fck: gpt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+	};
+
+	gpt4_gate_fck: gpt4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1000>;
+	};
+
+	gpt4_mux_fck: gpt4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1040>;
+	};
+
+	gpt4_fck: gpt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+	};
+
+	gpt5_gate_fck: gpt5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1000>;
+	};
+
+	gpt5_mux_fck: gpt5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1040>;
+	};
+
+	gpt5_fck: gpt5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+	};
+
+	gpt6_gate_fck: gpt6_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1000>;
+	};
+
+	gpt6_mux_fck: gpt6_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1040>;
+	};
+
+	gpt6_fck: gpt6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+	};
+
+	gpt7_gate_fck: gpt7_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1000>;
+	};
+
+	gpt7_mux_fck: gpt7_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1040>;
+	};
+
+	gpt7_fck: gpt7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+	};
+
+	gpt8_gate_fck: gpt8_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x1000>;
+	};
+
+	gpt8_mux_fck: gpt8_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1040>;
+	};
+
+	gpt8_fck: gpt8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+	};
+
+	gpt9_gate_fck: gpt9_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1000>;
+	};
+
+	gpt9_mux_fck: gpt9_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1040>;
+	};
+
+	gpt9_fck: gpt9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+	};
+
+	per_32k_alwon_fck: per_32k_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_dbck: gpio6_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_dbck: gpio5_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_dbck: gpio4_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_dbck: gpio3_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_dbck: gpio2_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_fck: wdt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <12>;
+	};
+
+	per_l4_ick: per_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_ick: gpio6_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_ick: gpio5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_ick: gpio4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_ick: gpio3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_ick: gpio2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_ick: wdt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <12>;
+	};
+
+	uart3_ick: uart3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <11>;
+	};
+
+	uart4_ick: uart4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <18>;
+	};
+
+	gpt9_ick: gpt9_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <10>;
+	};
+
+	gpt8_ick: gpt8_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <9>;
+	};
+
+	gpt7_ick: gpt7_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <8>;
+	};
+
+	gpt6_ick: gpt6_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <7>;
+	};
+
+	gpt5_ick: gpt5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <6>;
+	};
+
+	gpt4_ick: gpt4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <5>;
+	};
+
+	gpt3_ick: gpt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <4>;
+	};
+
+	gpt2_ick: gpt2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <3>;
+	};
+
+	mcbsp2_ick: mcbsp2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <0>;
+	};
+
+	mcbsp3_ick: mcbsp3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <1>;
+	};
+
+	mcbsp4_ick: mcbsp4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <2>;
+	};
+
+	mcbsp2_gate_fck: mcbsp2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <0>;
+		reg = <0x1000>;
+	};
+
+	mcbsp3_gate_fck: mcbsp3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <1>;
+		reg = <0x1000>;
+	};
+
+	mcbsp4_gate_fck: mcbsp4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x1000>;
+	};
+
+	emu_src_mux_ck: emu_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		reg = <0x1140>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	pclk_fck: pclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	pclkx2_fck: pclkx2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	atclk_fck: atclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	traceclk_src_fck: traceclk_src_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1140>;
+	};
+
+	traceclk_fck: traceclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&traceclk_src_fck>;
+		ti,bit-shift = <11>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	secure_32k_fck: secure_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpt12_fck: gpt12_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>;
+	};
+
+	dpll3_clkdm: dpll3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll3_ck>;
+	};
+
+	dpll1_clkdm: dpll1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll1_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>;
+	};
+
+	emu_clkdm: emu_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&emu_src_ck>;
+	};
+
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>;
+	};
+};
-- 
1.7.9.5

[PATCHv11 37/49] ARM: dts: AM35xx: use DT clock data

[Tero Kristo]

AM35xx now uses the clock data from device tree. Most of the data is
shared with OMAP3xxx, but as there is some delta, a new base .dtsi
file is also created for the SoC.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/am3517.dtsi |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 2fbe02f..788391f 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -61,3 +61,6 @@
 		};
 	};
 };
+
+/include/ "am35xx-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
-- 
1.7.9.5

[PATCHv11 39/49] ARM: OMAP2+: clock: add support for indexed memmaps

[Tero Kristo]

Using indexed memmaps is required for isolating the actual memory access
from the clock code. Now, the driver providing the support for the clock IP
block provides the low level routines for reading/writing clock registers
also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c |   26 +++++++++++++++++++++++++-
 arch/arm/mach-omap2/clock.h |    5 +++++
 2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 238be3f..c6da55f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -26,7 +26,6 @@
 #include <linux/clk-private.h>
 #include <asm/cpu.h>
 
-
 #include <trace/events/power.h>
 
 #include "soc.h"
@@ -56,6 +55,31 @@ u16 cpu_mask;
 static bool clkdm_control = true;
 
 static LIST_HEAD(clk_hw_omap_clocks);
+void __iomem *clk_memmaps[CLK_MAX_MEMMAPS];
+
+void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
+{
+	if (clk->flags & MEMMAP_ADDRESSING) {
+		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+		__raw_writel(val, clk_memmaps[r->index] + r->offset);
+	} else {
+		__raw_writel(val, reg);
+	}
+}
+
+u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
+{
+	u32 val;
+
+	if (clk->flags & MEMMAP_ADDRESSING) {
+		struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
+		val = __raw_readl(clk_memmaps[r->index] + r->offset);
+	} else {
+		val = __raw_readl(reg);
+	}
+
+	return val;
+}
 
 /*
  * Used for clocks that have the same value as the parent clock,
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index cbe5ff7..bda767a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -254,6 +254,9 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
 			       const char *mpu_ck_name);
 
+u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg);
+void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
+
 extern u16 cpu_mask;
 
 extern const struct clkops clkops_omap2_dflt_wait;
@@ -288,6 +291,8 @@ extern const struct clksel_rate div_1_3_rates[];
 extern const struct clksel_rate div_1_4_rates[];
 extern const struct clksel_rate div31_1to31_rates[];
 
+extern void __iomem *clk_memmaps[];
+
 extern int am33xx_clk_init(void);
 
 extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-- 
1.7.9.5

[PATCHv11 40/49] ARM: OMAP2+: clock: use driver API instead of direct memory read/write

[Tero Kristo]

Clock nodes shall use the services provided by underlying drivers to access
the hardware registers instead of direct memory read/write. Thus, change
all the code to use the new omap2_clk_readl / omap2_clk_writel APIs for this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clkt_clksel.c |   10 +++++-----
 arch/arm/mach-omap2/clkt_dpll.c   |    6 +++---
 arch/arm/mach-omap2/clkt_iclk.c   |   20 ++++++++++++--------
 arch/arm/mach-omap2/clock.c       |   24 ++++++++++++------------
 arch/arm/mach-omap2/clock36xx.c   |    7 ++++---
 arch/arm/mach-omap2/dpll3xxx.c    |   37 ++++++++++++++++++++-----------------
 arch/arm/mach-omap2/dpll44xx.c    |   12 ++++++------
 7 files changed, 62 insertions(+), 54 deletions(-)

diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 0ec9f6f..7ee2610 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -97,12 +97,12 @@ static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
 {
 	u32 v;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	v &= ~clk->clksel_mask;
 	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
+	omap2_clk_writel(v, clk, clk->clksel_reg);
 
-	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+	v = omap2_clk_readl(clk, clk->clksel_reg); /* OCP barrier */
 }
 
 /**
@@ -204,7 +204,7 @@ static u32 _read_divisor(struct clk_hw_omap *clk)
 	if (!clk->clksel || !clk->clksel_mask)
 		return 0;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	v &= clk->clksel_mask;
 	v >>= __ffs(clk->clksel_mask);
 
@@ -320,7 +320,7 @@ u8 omap2_clksel_find_parent_index(struct clk_hw *hw)
 	WARN((!clk->clksel || !clk->clksel_mask),
 	     "clock: %s: attempt to call on a non-clksel clock", clk_name);
 
-	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	r = omap2_clk_readl(clk, clk->clksel_reg) & clk->clksel_mask;
 	r >>= __ffs(clk->clksel_mask);
 
 	for (clks = clk->clksel; clks->parent && !found; clks++) {
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 924c230..47f9562 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -196,7 +196,7 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw)
 	if (!dd)
 		return -EINVAL;
 
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	v &= dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 
@@ -243,7 +243,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 		return 0;
 
 	/* Return bypass rate if DPLL is bypassed */
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	v &= dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 
@@ -262,7 +262,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 			return __clk_get_rate(dd->clk_bypass);
 	}
 
-	v = __raw_readl(dd->mult_div1_reg);
+	v = omap2_clk_readl(clk, dd->mult_div1_reg);
 	dpll_mult = v & dd->mult_mask;
 	dpll_mult >>= __ffs(dd->mult_mask);
 	dpll_div = v & dd->div1_mask;
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index f10eb03..333f0a6 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -25,25 +25,29 @@
 /* XXX */
 void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
 {
-	u32 v, r;
+	u32 v;
+	void __iomem *r;
 
-	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+	r = (__force void __iomem *)
+		((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
 
-	v = __raw_readl((__force void __iomem *)r);
+	v = omap2_clk_readl(clk, r);
 	v |= (1 << clk->enable_bit);
-	__raw_writel(v, (__force void __iomem *)r);
+	omap2_clk_writel(v, clk, r);
 }
 
 /* XXX */
 void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
 {
-	u32 v, r;
+	u32 v;
+	void __iomem *r;
 
-	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+	r = (__force void __iomem *)
+		((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
 
-	v = __raw_readl((__force void __iomem *)r);
+	v = omap2_clk_readl(clk, r);
 	v &= ~(1 << clk->enable_bit);
-	__raw_writel(v, (__force void __iomem *)r);
+	omap2_clk_writel(v, clk, r);
 }
 
 /* Public data */
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index c6da55f..5cfe395 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -122,14 +122,14 @@ unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
  * elapsed.  XXX Deprecated - should be moved into drivers for the
  * individual IP block that the IDLEST register exists in.
  */
-static int _wait_idlest_generic(void __iomem *reg, u32 mask, u8 idlest,
-				const char *name)
+static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
+				u32 mask, u8 idlest, const char *name)
 {
 	int i = 0, ena = 0;
 
 	ena = (idlest) ? 0 : mask;
 
-	omap_test_timeout(((__raw_readl(reg) & mask) == ena),
+	omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena),
 			  MAX_MODULE_ENABLE_WAIT, i);
 
 	if (i < MAX_MODULE_ENABLE_WAIT)
@@ -162,7 +162,7 @@ static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
 	/* Not all modules have multiple clocks that their IDLEST depends on */
 	if (clk->ops->find_companion) {
 		clk->ops->find_companion(clk, &companion_reg, &other_bit);
-		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+		if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit)))
 			return;
 	}
 
@@ -170,8 +170,8 @@ static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
 	r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
 	if (r) {
 		/* IDLEST register not in the CM module */
-		_wait_idlest_generic(idlest_reg, (1 << idlest_bit), idlest_val,
-				     __clk_get_name(clk->hw.clk));
+		_wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
+				     idlest_val, __clk_get_name(clk->hw.clk));
 	} else {
 		cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit);
 	};
@@ -333,13 +333,13 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
 	}
 
 	/* FIXME should not have INVERT_ENABLE bit here */
-	v = __raw_readl(clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
 		v &= ~(1 << clk->enable_bit);
 	else
 		v |= (1 << clk->enable_bit);
-	__raw_writel(v, clk->enable_reg);
-	v = __raw_readl(clk->enable_reg); /* OCP barrier */
+	omap2_clk_writel(v, clk, clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */
 
 	if (clk->ops && clk->ops->find_idlest)
 		_omap2_module_wait_ready(clk);
@@ -377,12 +377,12 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
 		return;
 	}
 
-	v = __raw_readl(clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
 		v |= (1 << clk->enable_bit);
 	else
 		v &= ~(1 << clk->enable_bit);
-	__raw_writel(v, clk->enable_reg);
+	omap2_clk_writel(v, clk, clk->enable_reg);
 	/* No OCP barrier needed here since it is a disable operation */
 
 	if (clkdm_control && clk->clkdm)
@@ -478,7 +478,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	u32 v;
 
-	v = __raw_readl(clk->enable_reg);
+	v = omap2_clk_readl(clk, clk->enable_reg);
 
 	if (clk->flags & INVERT_ENABLE)
 		v ^= BIT(clk->enable_bit);
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
index bbd6a3f..91ccb96 100644
--- a/arch/arm/mach-omap2/clock36xx.c
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -43,6 +43,7 @@ int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
 	struct clk_divider *parent;
 	struct clk_hw *parent_hw;
 	u32 dummy_v, orig_v;
+	struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk);
 	int ret;
 
 	/* Clear PWRDN bit of HSDIVIDER */
@@ -53,15 +54,15 @@ int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
 
 	/* Restore the dividers */
 	if (!ret) {
-		orig_v = __raw_readl(parent->reg);
+		orig_v = omap2_clk_readl(omap_clk, parent->reg);
 		dummy_v = orig_v;
 
 		/* Write any other value different from the Read value */
 		dummy_v ^= (1 << parent->shift);
-		__raw_writel(dummy_v, parent->reg);
+		omap2_clk_writel(dummy_v, omap_clk, parent->reg);
 
 		/* Write the original divider */
-		__raw_writel(orig_v, parent->reg);
+		omap2_clk_writel(orig_v, omap_clk, parent->reg);
 	}
 
 	return ret;
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 3a0296c..3185ced 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -50,10 +50,10 @@ static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
 
 	dd = clk->dpll_data;
 
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	v &= ~dd->enable_mask;
 	v |= clken_bits << __ffs(dd->enable_mask);
-	__raw_writel(v, dd->control_reg);
+	omap2_clk_writel(v, clk, dd->control_reg);
 }
 
 /* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
@@ -69,8 +69,8 @@ static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
 
 	state <<= __ffs(dd->idlest_mask);
 
-	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
-	       i < MAX_DPLL_WAIT_TRIES) {
+	while (((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask)
+		!= state) && i < MAX_DPLL_WAIT_TRIES) {
 		i++;
 		udelay(1);
 	}
@@ -147,7 +147,7 @@ static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
 	state <<= __ffs(dd->idlest_mask);
 
 	/* Check if already locked */
-	if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state)
+	if ((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) == state)
 		goto done;
 
 	ai = omap3_dpll_autoidle_read(clk);
@@ -311,14 +311,14 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 	 * only since freqsel field is no longer present on other devices.
 	 */
 	if (cpu_is_omap343x()) {
-		v = __raw_readl(dd->control_reg);
+		v = omap2_clk_readl(clk, dd->control_reg);
 		v &= ~dd->freqsel_mask;
 		v |= freqsel << __ffs(dd->freqsel_mask);
-		__raw_writel(v, dd->control_reg);
+		omap2_clk_writel(v, clk, dd->control_reg);
 	}
 
 	/* Set DPLL multiplier, divider */
-	v = __raw_readl(dd->mult_div1_reg);
+	v = omap2_clk_readl(clk, dd->mult_div1_reg);
 	v &= ~(dd->mult_mask | dd->div1_mask);
 	v |= dd->last_rounded_m << __ffs(dd->mult_mask);
 	v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
@@ -336,11 +336,11 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 		v |= sd_div << __ffs(dd->sddiv_mask);
 	}
 
-	__raw_writel(v, dd->mult_div1_reg);
+	omap2_clk_writel(v, clk, dd->mult_div1_reg);
 
 	/* Set 4X multiplier and low-power mode */
 	if (dd->m4xen_mask || dd->lpmode_mask) {
-		v = __raw_readl(dd->control_reg);
+		v = omap2_clk_readl(clk, dd->control_reg);
 
 		if (dd->m4xen_mask) {
 			if (dd->last_rounded_m4xen)
@@ -356,7 +356,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 				v &= ~dd->lpmode_mask;
 		}
 
-		__raw_writel(v, dd->control_reg);
+		omap2_clk_writel(v, clk, dd->control_reg);
 	}
 
 	/* We let the clock framework set the other output dividers later */
@@ -554,7 +554,7 @@ u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
 	if (!dd->autoidle_reg)
 		return -EINVAL;
 
-	v = __raw_readl(dd->autoidle_reg);
+	v = omap2_clk_readl(clk, dd->autoidle_reg);
 	v &= dd->autoidle_mask;
 	v >>= __ffs(dd->autoidle_mask);
 
@@ -588,10 +588,10 @@ void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
 	 * by writing 0x5 instead of 0x1.  Add some mechanism to
 	 * optionally enter this mode.
 	 */
-	v = __raw_readl(dd->autoidle_reg);
+	v = omap2_clk_readl(clk, dd->autoidle_reg);
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
+	omap2_clk_writel(v, clk, dd->autoidle_reg);
 
 }
 
@@ -614,10 +614,10 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
 	if (!dd->autoidle_reg)
 		return;
 
-	v = __raw_readl(dd->autoidle_reg);
+	v = omap2_clk_readl(clk, dd->autoidle_reg);
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
+	omap2_clk_writel(v, clk, dd->autoidle_reg);
 
 }
 
@@ -639,6 +639,9 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	struct clk_hw_omap *pclk = NULL;
 	struct clk *parent;
 
+	if (!parent_rate)
+		return 0;
+
 	/* Walk up the parents of clk, looking for a DPLL */
 	do {
 		do {
@@ -660,7 +663,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 
 	WARN_ON(!dd->enable_mask);
 
-	v = __raw_readl(dd->control_reg) & dd->enable_mask;
+	v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
 		rate = parent_rate;
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index d28b0f7..52f9438 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -42,7 +42,7 @@ int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	v &= mask;
 	v >>= __ffs(mask);
 
@@ -61,10 +61,10 @@ void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	/* Clear the bit to allow gatectrl */
 	v &= ~mask;
-	__raw_writel(v, clk->clksel_reg);
+	omap2_clk_writel(v, clk, clk->clksel_reg);
 }
 
 void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
@@ -79,10 +79,10 @@ void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = omap2_clk_readl(clk, clk->clksel_reg);
 	/* Set the bit to deny gatectrl */
 	v |= mask;
-	__raw_writel(v, clk->clksel_reg);
+	omap2_clk_writel(v, clk, clk->clksel_reg);
 }
 
 const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
@@ -140,7 +140,7 @@ unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
 	rate = omap2_get_dpll_rate(clk);
 
 	/* regm4xen adds a multiplier of 4 to DPLL calculations */
-	v = __raw_readl(dd->control_reg);
+	v = omap2_clk_readl(clk, dd->control_reg);
 	if (v & OMAP4430_DPLL_REGM4XEN_MASK)
 		rate *= OMAP4430_REGM4XEN_MULT;
 
-- 
1.7.9.5

[PATCHv11 02/49] clk: fixed-rate: add support for registering fixed-rate clock from descriptor

[Tero Kristo]

From: Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

New clk_register_desc() call can be used to register this clock type now.

Signed-off-by: Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 drivers/clk/clk-fixed-rate.c |   24 ++++++++++++++++++++++++
 include/linux/clk-provider.h |   15 +++++++++++++++
 2 files changed, 39 insertions(+)

diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index 1ed591a..d7aa01e 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -26,8 +26,12 @@
  * parent - fixed parent.  No clk_set_parent support
  */
 
+/* resolve struct clk_fixed_rate from inner struct clk_hw member */
 #define to_clk_fixed_rate(_hw) container_of(_hw, struct clk_fixed_rate, hw)
 
+/* resolve struct clk_fixed_rate_desc from inner struct clk_desc member */
+#define to_hw_desc(_desc) container_of(_desc, struct clk_fixed_rate_desc, desc)
+
 static unsigned long clk_fixed_rate_recalc_rate(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
@@ -82,6 +86,26 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 }
 EXPORT_SYMBOL_GPL(clk_register_fixed_rate);
 
+struct clk_hw *clk_register_fixed_rate_desc(struct device *dev,
+					    struct clk_desc *desc)
+{
+	struct clk_fixed_rate *fixed;
+	struct clk_fixed_rate_desc *hw_desc;
+
+	hw_desc = to_hw_desc(desc);
+
+	/* allocate fixed-rate clock */
+	fixed = kzalloc(sizeof(*fixed), GFP_KERNEL);
+	if (!fixed)
+		return ERR_PTR(-ENOMEM);
+
+	/* populate struct clk_fixed_rate assignments */
+	fixed->fixed_rate = hw_desc->fixed_rate;
+
+	return &fixed->hw;
+}
+EXPORT_SYMBOL_GPL(clk_register_fixed_rate_desc);
+
 #ifdef CONFIG_OF
 /**
  * of_fixed_clk_setup() - Setup function for simple fixed rate clock
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7fddcb3..82dfe84 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -219,6 +219,21 @@ struct clk_fixed_rate {
 	u8		flags;
 };
 
+/**
+ * struct clk_fixed_rate_desc - fixed-rate clock description
+ * @desc:	handle between common and hardware-specific interfaces
+ * @fixed_rate: constant frequency of clock
+ * @flags:	hardware-specific flags
+ */
+struct clk_fixed_rate_desc {
+	struct clk_desc	desc;
+	unsigned long	fixed_rate;
+	u8		flags;
+};
+
+struct clk_hw *clk_register_fixed_rate_desc(struct device *dev,
+					    struct clk_desc *desc);
+
 extern const struct clk_ops clk_fixed_rate_ops;
 struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv11 26/49] CLK: TI: add interface clock support for OMAP3

[Tero Kristo]

OMAP3 has interface clocks in addition to functional clocks, which
require special handling for the autoidle and idle status register
offsets mainly.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 .../devicetree/bindings/clock/ti/interface.txt     |   54 +++++++++
 arch/arm/mach-omap2/clock.h                        |    5 -
 drivers/clk/ti/Makefile                            |    1 +
 drivers/clk/ti/interface.c                         |  125 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    5 +
 5 files changed, 185 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/interface.txt
 create mode 100644 drivers/clk/ti/interface.c

diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
new file mode 100644
index 0000000..064e8ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -0,0 +1,54 @@
+Binding for Texas Instruments interface clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features, including
+companion clock finding (match corresponding functional gate
+clock) and hardware autoidle enable / disable.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+
+Required properties:
+- compatible : shall be one of:
+  "ti,omap3-interface-clock" - basic OMAP3 interface clock
+  "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware
+				       capability for waiting clock to be ready
+  "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW
+					handling
+  "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling
+  "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling
+  "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : base address for the control register
+
+Optional properties:
+- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
+
+Examples:
+	aes1_ick: aes1_ick@48004a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x48004a14 0x4>;
+		ti,bit-shift = <3>;
+	};
+
+	cam_ick: cam_ick@48004f10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x48004f10 0x4>;
+		ti,bit-shift = <0>;
+	};
+
+	ssi_ick_3430es2: ssi_ick_3430es2@48004a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-ssi-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x48004a10 0x4>;
+		ti,bit-shift = <0>;
+	};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 1da9dc3..cbe5ff7 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -270,15 +270,10 @@ extern struct clk dummy_ck;
 
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
 extern const struct clk_hw_omap_ops clkhwops_apll54;
 extern const struct clk_hw_omap_ops clkhwops_apll96;
 extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 7eb6f2b..e42a703 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -3,6 +3,7 @@ obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
 					   composite.o mux.o apll.o
 obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= interface.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= clk-54xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= clk-7xx.o
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
new file mode 100644
index 0000000..320a2b1
--- /dev/null
+++ b/drivers/clk/ti/interface.c
@@ -0,0 +1,125 @@
+/*
+ * OMAP interface clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static const struct clk_ops ti_interface_clk_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap2_dflt_clk_enable,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+static void __init _of_ti_interface_clk_setup(struct device_node *node,
+					      const struct clk_hw_omap_ops *ops)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+	const char *parent_name;
+	u32 val;
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw)
+		return;
+
+	clk_hw->hw.init = &init;
+	clk_hw->ops = ops;
+	clk_hw->flags = MEMMAP_ADDRESSING;
+
+	clk_hw->enable_reg = ti_clk_get_reg_addr(node, 0);
+	if (!clk_hw->enable_reg)
+		goto cleanup;
+
+	if (!of_property_read_u32(node, "ti,bit-shift", &val))
+		clk_hw->enable_bit = val;
+
+	init.name = node->name;
+	init.ops = &ti_interface_clk_ops;
+	init.flags = 0;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	if (!parent_name) {
+		pr_err("%s must have a parent\n", node->name);
+		goto cleanup;
+	}
+
+	init.num_parents = 1;
+	init.parent_names = &parent_name;
+
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		omap2_init_clk_hw_omap_clocks(clk);
+		return;
+	}
+
+cleanup:
+	kfree(clk_hw);
+}
+
+static void __init of_ti_interface_clk_setup(struct device_node *node)
+{
+	_of_ti_interface_clk_setup(node, &clkhwops_iclk_wait);
+}
+CLK_OF_DECLARE(ti_interface_clk, "ti,omap3-interface-clock",
+	       of_ti_interface_clk_setup);
+
+static void __init of_ti_no_wait_interface_clk_setup(struct device_node *node)
+{
+	_of_ti_interface_clk_setup(node, &clkhwops_iclk);
+}
+CLK_OF_DECLARE(ti_no_wait_interface_clk, "ti,omap3-no-wait-interface-clock",
+	       of_ti_no_wait_interface_clk_setup);
+
+static void __init of_ti_hsotgusb_interface_clk_setup(struct device_node *node)
+{
+	_of_ti_interface_clk_setup(node,
+				   &clkhwops_omap3430es2_iclk_hsotgusb_wait);
+}
+CLK_OF_DECLARE(ti_hsotgusb_interface_clk, "ti,omap3-hsotgusb-interface-clock",
+	       of_ti_hsotgusb_interface_clk_setup);
+
+static void __init of_ti_dss_interface_clk_setup(struct device_node *node)
+{
+	_of_ti_interface_clk_setup(node,
+				   &clkhwops_omap3430es2_iclk_dss_usbhost_wait);
+}
+CLK_OF_DECLARE(ti_dss_interface_clk, "ti,omap3-dss-interface-clock",
+	       of_ti_dss_interface_clk_setup);
+
+static void __init of_ti_ssi_interface_clk_setup(struct device_node *node)
+{
+	_of_ti_interface_clk_setup(node, &clkhwops_omap3430es2_iclk_ssi_wait);
+}
+CLK_OF_DECLARE(ti_ssi_interface_clk, "ti,omap3-ssi-interface-clock",
+	       of_ti_ssi_interface_clk_setup);
+
+static void __init of_ti_am35xx_interface_clk_setup(struct device_node *node)
+{
+	_of_ti_interface_clk_setup(node, &clkhwops_am35xx_ipss_wait);
+}
+CLK_OF_DECLARE(ti_am35xx_interface_clk, "ti,am35xx-interface-clock",
+	       of_ti_am35xx_interface_clk_setup);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 4a89ce8..943e716 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -264,6 +264,11 @@ extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
 extern const struct clk_hw_omap_ops clkhwops_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
 
 #endif
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv11 28/49] CLK: TI: add am43xx clock init file

[Tero Kristo]

clk-43xx.c now contains the clock init functionality for am43xx, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
Tested-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/clk/ti/Makefile   |    2 +-
 drivers/clk/ti/clk-43xx.c |  118 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h    |    1 +
 3 files changed, 120 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ti/clk-43xx.c

diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index ab386c8..007c3c2 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
 					   fixed-factor.o gate.o clockdomain.o \
-					   composite.o mux.o apll.o
+					   composite.o mux.o apll.o clk-43xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= clk-33xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= interface.o clk-3xxx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clk-44xx.o
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
new file mode 100644
index 0000000..67c8de5
--- /dev/null
+++ b/drivers/clk/ti/clk-43xx.c
@@ -0,0 +1,118 @@
+/*
+ * AM43XX Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc
+ *     Tero Kristo (t-kristo-l0cyMroinI0@public.gmane.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+
+static struct ti_dt_clk am43xx_clks[] = {
+	DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
+	DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
+	DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"),
+	DT_CLK(NULL, "virt_24000000_ck", "virt_24000000_ck"),
+	DT_CLK(NULL, "virt_25000000_ck", "virt_25000000_ck"),
+	DT_CLK(NULL, "virt_26000000_ck", "virt_26000000_ck"),
+	DT_CLK(NULL, "sys_clkin_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "tclkin_ck", "tclkin_ck"),
+	DT_CLK(NULL, "dpll_core_ck", "dpll_core_ck"),
+	DT_CLK(NULL, "dpll_core_x2_ck", "dpll_core_x2_ck"),
+	DT_CLK(NULL, "dpll_core_m4_ck", "dpll_core_m4_ck"),
+	DT_CLK(NULL, "dpll_core_m5_ck", "dpll_core_m5_ck"),
+	DT_CLK(NULL, "dpll_core_m6_ck", "dpll_core_m6_ck"),
+	DT_CLK(NULL, "dpll_mpu_ck", "dpll_mpu_ck"),
+	DT_CLK(NULL, "dpll_mpu_m2_ck", "dpll_mpu_m2_ck"),
+	DT_CLK(NULL, "dpll_ddr_ck", "dpll_ddr_ck"),
+	DT_CLK(NULL, "dpll_ddr_m2_ck", "dpll_ddr_m2_ck"),
+	DT_CLK(NULL, "dpll_disp_ck", "dpll_disp_ck"),
+	DT_CLK(NULL, "dpll_disp_m2_ck", "dpll_disp_m2_ck"),
+	DT_CLK(NULL, "dpll_per_ck", "dpll_per_ck"),
+	DT_CLK(NULL, "dpll_per_m2_ck", "dpll_per_m2_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", "dpll_per_m2_div4_wkupdm_ck"),
+	DT_CLK(NULL, "dpll_per_m2_div4_ck", "dpll_per_m2_div4_ck"),
+	DT_CLK(NULL, "adc_tsc_fck", "adc_tsc_fck"),
+	DT_CLK(NULL, "clkdiv32k_ck", "clkdiv32k_ck"),
+	DT_CLK(NULL, "clkdiv32k_ick", "clkdiv32k_ick"),
+	DT_CLK(NULL, "dcan0_fck", "dcan0_fck"),
+	DT_CLK(NULL, "dcan1_fck", "dcan1_fck"),
+	DT_CLK(NULL, "pruss_ocp_gclk", "pruss_ocp_gclk"),
+	DT_CLK(NULL, "mcasp0_fck", "mcasp0_fck"),
+	DT_CLK(NULL, "mcasp1_fck", "mcasp1_fck"),
+	DT_CLK(NULL, "smartreflex0_fck", "smartreflex0_fck"),
+	DT_CLK(NULL, "smartreflex1_fck", "smartreflex1_fck"),
+	DT_CLK(NULL, "sha0_fck", "sha0_fck"),
+	DT_CLK(NULL, "aes0_fck", "aes0_fck"),
+	DT_CLK(NULL, "timer1_fck", "timer1_fck"),
+	DT_CLK(NULL, "timer2_fck", "timer2_fck"),
+	DT_CLK(NULL, "timer3_fck", "timer3_fck"),
+	DT_CLK(NULL, "timer4_fck", "timer4_fck"),
+	DT_CLK(NULL, "timer5_fck", "timer5_fck"),
+	DT_CLK(NULL, "timer6_fck", "timer6_fck"),
+	DT_CLK(NULL, "timer7_fck", "timer7_fck"),
+	DT_CLK(NULL, "wdt1_fck", "wdt1_fck"),
+	DT_CLK(NULL, "l3_gclk", "l3_gclk"),
+	DT_CLK(NULL, "dpll_core_m4_div2_ck", "dpll_core_m4_div2_ck"),
+	DT_CLK(NULL, "l4hs_gclk", "l4hs_gclk"),
+	DT_CLK(NULL, "l3s_gclk", "l3s_gclk"),
+	DT_CLK(NULL, "l4ls_gclk", "l4ls_gclk"),
+	DT_CLK(NULL, "clk_24mhz", "clk_24mhz"),
+	DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
+	DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
+	DT_CLK(NULL, "gpio0_dbclk_mux_ck", "gpio0_dbclk_mux_ck"),
+	DT_CLK(NULL, "gpio0_dbclk", "gpio0_dbclk"),
+	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
+	DT_CLK(NULL, "gpio2_dbclk", "gpio2_dbclk"),
+	DT_CLK(NULL, "gpio3_dbclk", "gpio3_dbclk"),
+	DT_CLK(NULL, "gpio4_dbclk", "gpio4_dbclk"),
+	DT_CLK(NULL, "gpio5_dbclk", "gpio5_dbclk"),
+	DT_CLK(NULL, "mmc_clk", "mmc_clk"),
+	DT_CLK(NULL, "gfx_fclk_clksel_ck", "gfx_fclk_clksel_ck"),
+	DT_CLK(NULL, "gfx_fck_div_ck", "gfx_fck_div_ck"),
+	DT_CLK(NULL, "timer_32k_ck", "clkdiv32k_ick"),
+	DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "sysclk_div", "sysclk_div"),
+	DT_CLK(NULL, "disp_clk", "disp_clk"),
+	DT_CLK(NULL, "clk_32k_mosc_ck", "clk_32k_mosc_ck"),
+	DT_CLK(NULL, "clk_32k_tpm_ck", "clk_32k_tpm_ck"),
+	DT_CLK(NULL, "dpll_extdev_ck", "dpll_extdev_ck"),
+	DT_CLK(NULL, "dpll_extdev_m2_ck", "dpll_extdev_m2_ck"),
+	DT_CLK(NULL, "mux_synctimer32k_ck", "mux_synctimer32k_ck"),
+	DT_CLK(NULL, "synctimer_32kclk", "synctimer_32kclk"),
+	DT_CLK(NULL, "timer8_fck", "timer8_fck"),
+	DT_CLK(NULL, "timer9_fck", "timer9_fck"),
+	DT_CLK(NULL, "timer10_fck", "timer10_fck"),
+	DT_CLK(NULL, "timer11_fck", "timer11_fck"),
+	DT_CLK(NULL, "cpsw_50m_clkdiv", "cpsw_50m_clkdiv"),
+	DT_CLK(NULL, "cpsw_5m_clkdiv", "cpsw_5m_clkdiv"),
+	DT_CLK(NULL, "dpll_ddr_x2_ck", "dpll_ddr_x2_ck"),
+	DT_CLK(NULL, "dpll_ddr_m4_ck", "dpll_ddr_m4_ck"),
+	DT_CLK(NULL, "dpll_per_clkdcoldo", "dpll_per_clkdcoldo"),
+	DT_CLK(NULL, "dll_aging_clk_div", "dll_aging_clk_div"),
+	DT_CLK(NULL, "div_core_25m_ck", "div_core_25m_ck"),
+	DT_CLK(NULL, "func_12m_clk", "func_12m_clk"),
+	DT_CLK(NULL, "vtp_clk_div", "vtp_clk_div"),
+	DT_CLK(NULL, "usbphy_32khz_clkmux", "usbphy_32khz_clkmux"),
+	{ .node_name = NULL },
+};
+
+int __init am43xx_dt_clk_init(void)
+{
+	ti_dt_clocks_register(am43xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	return 0;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 2f8a9f8..7775182 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -255,6 +255,7 @@ int omap4xxx_dt_clk_init(void);
 int omap5xxx_dt_clk_init(void);
 int dra7xx_dt_clk_init(void);
 int am33xx_dt_clk_init(void);
+int am43xx_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv11 29/49] ARM: dts: omap4 clock data

[Tero Kristo]

This patch creates a unique node for each clock in the OMAP4 power,
reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly
different clock tree which is taken into account in the data.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/omap4.dtsi           |   54 ++
 arch/arm/boot/dts/omap443x-clocks.dtsi |   18 +
 arch/arm/boot/dts/omap443x.dtsi        |    2 +
 arch/arm/boot/dts/omap4460.dtsi        |    2 +
 arch/arm/boot/dts/omap446x-clocks.dtsi |   27 +
 arch/arm/boot/dts/omap44xx-clocks.dtsi | 1651 ++++++++++++++++++++++++++++++++
 6 files changed, 1754 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap443x-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap446x-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/omap44xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index a1e0585..d3f8a6e 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -107,6 +107,58 @@
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
+		cm1: cm1@4a004000 {
+			compatible = "ti,omap4-cm1";
+			reg = <0x4a004000 0x2000>;
+
+			cm1_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm1_clockdomains: clockdomains {
+			};
+		};
+
+		prm: prm@4a306000 {
+			compatible = "ti,omap4-prm";
+			reg = <0x4a306000 0x3000>;
+
+			prm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prm_clockdomains: clockdomains {
+			};
+		};
+
+		cm2: cm2@4a008000 {
+			compatible = "ti,omap4-cm2";
+			reg = <0x4a008000 0x3000>;
+
+			cm2_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm2_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@4a30a000 {
+			compatible = "ti,omap4-scrm";
+			reg = <0x4a30a000 0x2000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
 		counter32k: counter@4a304000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4a304000 0x20>;
@@ -707,3 +759,5 @@
 		};
 	};
 };
+
+/include/ "omap44xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
new file mode 100644
index 0000000..2bd2166
--- /dev/null
+++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm_clocks {
+	bandgap_fclk: bandgap_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index bcf455e..f67e191 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -31,3 +31,5 @@
 		compatible = "ti,omap4430-bandgap";
 	};
 };
+
+/include/ "omap443x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index c2f0f39..1758601 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -39,3 +39,5 @@
 		gpios = <&gpio3 22 0>; /* tshut */
 	};
 };
+
+/include/ "omap446x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi
new file mode 100644
index 0000000..be033e9
--- /dev/null
+++ b/arch/arm/boot/dts/omap446x-clocks.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm_clocks {
+	div_ts_ck: div_ts_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1888>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	bandgap_ts_fclk: bandgap_ts_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&div_ts_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
new file mode 100644
index 0000000..91f607f
--- /dev/null
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -0,0 +1,1651 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm1_clocks {
+	extalt_clkin_ck: extalt_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <59000000>;
+	};
+
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	tie_low_clock_ck: tie_low_clock_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60motg_ck: xclk60motg_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+		reg = <0x01f0>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x0528>;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m6x2_ck: dpll_core_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ddrphy_ck: ddrphy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_m5x2_ck: dpll_core_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	div_core_ck: div_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	div_iva_hs_clk: div_iva_hs_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x01dc>;
+		ti,index-power-of-two;
+	};
+
+	div_mpu_hs_clk: div_mpu_hs_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	dpll_core_m4x2_ck: dpll_core_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dll_clk_div_ck: dll_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0134>;
+	};
+
+	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
+	};
+
+	dpll_core_m7x2_ck: dpll_core_m7x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	per_hs_clk_div_ck: per_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_div_ck: l3_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&div_core_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	l4_div_ck: l4_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	lp_clk_div_ck: lp_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	mpu_periphclk: mpu_periphclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ocp_abe_iclk: ocp_abe_iclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x0528>;
+		ti,dividers = <2>, <1>;
+	};
+
+	per_abe_24m_fclk: per_abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dmic_sync_mux_ck: dmic_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0538>;
+	};
+
+	func_dmic_abe_gfclk: func_dmic_abe_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0538>;
+	};
+
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0540>;
+	};
+
+	func_mcasp_abe_gfclk: func_mcasp_abe_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0540>;
+	};
+
+	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0548>;
+	};
+
+	func_mcbsp1_gfclk: func_mcbsp1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0548>;
+	};
+
+	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0550>;
+	};
+
+	func_mcbsp2_gfclk: func_mcbsp2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0558>;
+	};
+
+	func_mcbsp3_gfclk: func_mcbsp3_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	slimbus1_fclk_1: slimbus1_fclk_1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_24m_clk>;
+		ti,bit-shift = <9>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_fclk_0: slimbus1_fclk_0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&abe_24m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_fclk_2: slimbus1_fclk_2 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_clk>;
+		ti,bit-shift = <11>;
+		reg = <0x0560>;
+	};
+
+	timer5_sync_mux: timer5_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer6_sync_mux: timer6_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	timer7_sync_mux: timer7_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0578>;
+	};
+
+	timer8_sync_mux: timer8_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm_clocks {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	dbgclk_mux_ck: dbgclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
+		reg = <0x0108>;
+	};
+
+	syc_clk_div_ck: syc_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1838>;
+	};
+
+	dmt1_clk_mux: dmt1_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	usim_ck: usim_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1858>;
+		ti,dividers = <14>, <18>;
+	};
+
+	usim_fclk: usim_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usim_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1858>;
+	};
+
+	pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x1a20>;
+	};
+
+	pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x1a20>;
+	};
+
+	stm_clk_div_ck: stm_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&pmd_stm_clock_mux_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <64>;
+		reg = <0x1a20>;
+		ti,index-power-of-two;
+	};
+
+	trace_clk_div_div_ck: trace_clk_div_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,bit-shift = <24>;
+		ti,max-div = <64>;
+		reg = <0x1a20>;
+		ti,index-power-of-two;
+	};
+
+	trace_clk_div_ck: trace_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&trace_clk_div_div_ck>;
+	};
+};
+
+&prm_clockdomains {
+	emu_sys_clkdm: emu_sys_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&trace_clk_div_ck>;
+	};
+};
+
+&cm2_clocks {
+	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+		reg = <0x0150>;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0154>;
+	};
+
+	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
+	};
+
+	dpll_per_m4x2_ck: dpll_per_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m5x2_ck: dpll_per_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m6x2_ck: dpll_per_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m7x2_ck: dpll_per_m7x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ducati_clk_mux_ck: ducati_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
+		reg = <0x0100>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_24mc_fclk: func_24mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <4>, <8>;
+	};
+
+	func_48mc_fclk: func_48mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_64m_fclk: func_64m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	init_60m_fclk: init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	per_abe_nc_fclk: per_abe_nc_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		reg = <0x0108>;
+		ti,max-div = <2>;
+	};
+
+	aes1_fck: aes1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15a0>;
+	};
+
+	aes2_fck: aes2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15a8>;
+	};
+
+	dss_sys_clk: dss_sys_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&syc_clk_div_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1120>;
+	};
+
+	dss_tv_clk: dss_tv_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&extalt_clkin_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1120>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m5x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1120>;
+		ti,set-rate-parent;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1120>;
+	};
+
+	dss_fck: dss_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x1120>;
+	};
+
+	fdif_fck: fdif_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <4>;
+		reg = <0x1028>;
+		ti,index-power-of-two;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1460>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1468>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1470>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1478>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1480>;
+	};
+
+	sgx_clk_mux: sgx_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m7x2_ck>, <&dpll_per_m7x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1220>;
+	};
+
+	hsi_fck: hsi_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <4>;
+		reg = <0x1338>;
+		ti,index-power-of-two;
+	};
+
+	iss_ctrlclk: iss_ctrlclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1020>;
+	};
+
+	mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_96m_fclk>, <&per_abe_nc_fclk>;
+		ti,bit-shift = <25>;
+		reg = <0x14e0>;
+	};
+
+	per_mcbsp4_gfclk: per_mcbsp4_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp4_sync_mux_ck>, <&pad_clks_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x14e0>;
+	};
+
+	hsmmc1_fclk: hsmmc1_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x1328>;
+	};
+
+	hsmmc2_fclk: hsmmc2_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x1330>;
+	};
+
+	ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x13e0>;
+	};
+
+	sha2md5_fck: sha2md5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15c8>;
+	};
+
+	slimbus2_fclk_1: slimbus2_fclk_1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_abe_24m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1538>;
+	};
+
+	slimbus2_fclk_0: slimbus2_fclk_0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_24mc_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1538>;
+	};
+
+	slimbus2_slimbus_clk: slimbus2_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_slimbus_core_clks_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1538>;
+	};
+
+	smartreflex_core_fck: smartreflex_core_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0638>;
+	};
+
+	smartreflex_iva_fck: smartreflex_iva_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0630>;
+	};
+
+	smartreflex_mpu_fck: smartreflex_mpu_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0628>;
+	};
+
+	cm2_dm10_mux: cm2_dm10_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1428>;
+	};
+
+	cm2_dm11_mux: cm2_dm11_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1430>;
+	};
+
+	cm2_dm2_mux: cm2_dm2_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1438>;
+	};
+
+	cm2_dm3_mux: cm2_dm3_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1440>;
+	};
+
+	cm2_dm4_mux: cm2_dm4_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1448>;
+	};
+
+	cm2_dm9_mux: cm2_dm9_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1450>;
+	};
+
+	usb_host_fs_fck: usb_host_fs_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <1>;
+		reg = <0x13d0>;
+	};
+
+	utmi_p1_gfclk: utmi_p1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&init_60m_fclk>, <&xclk60mhsp1_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p1_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1358>;
+	};
+
+	utmi_p2_gfclk: utmi_p2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&init_60m_fclk>, <&xclk60mhsp2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p2_gfclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <11>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <12>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_func48mclk: usb_host_hs_func48mclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <15>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_fck: usb_host_hs_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <1>;
+		reg = <0x1358>;
+	};
+
+	otg_60m_gfclk: otg_60m_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&utmi_phy_clkout_ck>, <&xclk60motg_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1360>;
+	};
+
+	usb_otg_hs_xclk: usb_otg_hs_xclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&otg_60m_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1360>;
+	};
+
+	usb_otg_hs_ick: usb_otg_hs_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x1360>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_ick: usb_tll_hs_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_div_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x1368>;
+	};
+};
+
+&cm2_clockdomains {
+	l3_init_clkdm: l3_init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>, <&usb_host_fs_fck>;
+	};
+};
+
+&scrm_clocks {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclk5_src_gate_ck: auxclk5_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_mux_ck: auxclk5_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_ck: auxclk5_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
+	};
+
+	auxclk5_ck: auxclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk5_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0324>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+
+	auxclkreq4_ck: auxclkreq4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0220>;
+	};
+
+	auxclkreq5_ck: auxclkreq5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0224>;
+	};
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv11 38/49] ARM: dts: am43xx clock data

[Tero Kristo]

This patch creates a unique node for each clock in the AM43xx power,
reset and clock manager (PRCM).

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/am4372.dtsi        |   28 ++
 arch/arm/boot/dts/am43xx-clocks.dtsi |  656 ++++++++++++++++++++++++++++++++++
 2 files changed, 684 insertions(+)
 create mode 100644 arch/arm/boot/dts/am43xx-clocks.dtsi

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 974d103..c6bd4d9 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -67,6 +67,32 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		prcm: prcm@44df0000 {
+			compatible = "ti,am4-prcm";
+			reg = <0x44df0000 0x11000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@44e10000 {
+			compatible = "ti,am4-scrm";
+			reg = <0x44e10000 0x2000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
 		edma: edma@49000000 {
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
@@ -665,3 +691,5 @@
 		};
 	};
 };
+
+/include/ "am43xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
new file mode 100644
index 0000000..142009c
--- /dev/null
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -0,0 +1,656 @@
+/*
+ * Device Tree Source for AM43xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm_clocks {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+&prcm_clocks {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d3c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d40>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2da0>, <0x2da4>, <0x2dac>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e30>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2de0>, <0x2de4>, <0x2dec>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2df0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	clkdiv32k_ick: clkdiv32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a38>;
+	};
+
+	sysclk_div: sysclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
+		reg = <0x4248>;
+	};
+
+	clk_32k_tpm_ck: clk_32k_tpm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4200>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4204>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4208>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x420c>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4210>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4214>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4218>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		reg = <0x422c>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
+		reg = <0x4238>;
+	};
+
+	clk_32k_mosc_ck: clk_32k_mosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4240>;
+	};
+
+	gpio0_dbclk: gpio0_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&gpio0_dbclk_mux_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2b68>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c78>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c80>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c88>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c90>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c98>;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x423c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x423c>;
+		ti,max-div = <2>;
+	};
+
+	disp_clk: disp_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x4244>;
+	};
+
+	dpll_extdev_ck: dpll_extdev_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+	};
+
+	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_extdev_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mux_synctimer32k_ck: mux_synctimer32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
+		reg = <0x4230>;
+	};
+
+	synctimer_32kclk: synctimer_32kclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&mux_synctimer32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a30>;
+	};
+
+	timer8_fck: timer8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x421c>;
+	};
+
+	timer9_fck: timer9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4220>;
+	};
+
+	timer10_fck: timer10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4224>;
+	};
+
+	timer11_fck: timer11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4228>;
+	};
+
+	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpsw_50m_clkdiv>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dll_aging_clk_div: dll_aging_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x4250>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	div_core_25m_ck: div_core_25m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_12m_clk: func_12m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	vtp_clk_div: vtp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4260>;
+	};
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv11 41/49] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm

[Tero Kristo]

If the main clock for a hwmod is of basic clock type, it is illegal to type
cast this to clk_hw_omap and will result in bogus data. Fixed by checking
the clock flags before attempting the type cast.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
Tested-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/mach-omap2/omap_hwmod.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b78c07b..b292116 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -686,6 +686,8 @@ static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
 	if (oh->clkdm) {
 		return oh->clkdm;
 	} else if (oh->_clk) {
+		if (__clk_get_flags(oh->_clk) & CLK_IS_BASIC)
+			return NULL;
 		clk = to_clk_hw_omap(__clk_get_hw(oh->_clk));
 		return  clk->clkdm;
 	}
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv11 42/49] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name

[Tero Kristo]

DT clocks are mostly missing clkdm info now, and this causes an issue with
counter32k which makes its slave idlemode wrong and prevents core idle.

Fixed by initializing the hwmod clkdm pointers for omap3 also which makes
sure the clkdm flag matching logic works properly.

This patch also changes the return value for _init_clkdm to 0 for
incorrect clkdm_name, as this a warning, not a fatal error.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
Tested-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/mach-omap2/omap_hwmod.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b292116..c5b042a 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1578,7 +1578,7 @@ static int _init_clkdm(struct omap_hwmod *oh)
 	if (!oh->clkdm) {
 		pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
 			oh->name, oh->clkdm_name);
-		return -EINVAL;
+		return 0;
 	}
 
 	pr_debug("omap_hwmod: %s: associated to clkdm %s\n",
@@ -4237,6 +4237,7 @@ void __init omap_hwmod_init(void)
 		soc_ops.assert_hardreset = _omap2_assert_hardreset;
 		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
+		soc_ops.init_clkdm = _init_clkdm;
 	} else if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv11 43/49] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT

[Tero Kristo]

This patch provides top level functionality for the DT clock initialization.
Clock tree is initialized hierarchically starting from IP modules (CM/PRM/PRCM)
going down towards individual clock nodes, and finally initializing
clockdomains once all the clocks are ready.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 arch/arm/mach-omap2/prm.h        |    1 +
 arch/arm/mach-omap2/prm_common.c |   66 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 67 insertions(+)

diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ac25ae6..623db40 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -18,6 +18,7 @@
 # ifndef __ASSEMBLER__
 extern void __iomem *prm_base;
 extern void omap2_set_globals_prm(void __iomem *prm);
+int of_prcm_init(void);
 # endif
 
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index a2e1174..835eb7d 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -23,6 +23,10 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
 
 #include "soc.h"
 #include "prm2xxx_3xxx.h"
@@ -30,6 +34,7 @@
 #include "prm3xxx.h"
 #include "prm44xx.h"
 #include "common.h"
+#include "clock.h"
 
 /*
  * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
@@ -464,3 +469,64 @@ int prm_unregister(struct prm_ll_data *pld)
 
 	return 0;
 }
+
+static struct of_device_id omap_prcm_dt_match_table[] = {
+	{ .compatible = "ti,am3-prcm" },
+	{ .compatible = "ti,am3-scrm" },
+	{ .compatible = "ti,am4-prcm" },
+	{ .compatible = "ti,am4-scrm" },
+	{ .compatible = "ti,omap3-prm" },
+	{ .compatible = "ti,omap3-cm" },
+	{ .compatible = "ti,omap3-scrm" },
+	{ .compatible = "ti,omap4-cm1" },
+	{ .compatible = "ti,omap4-prm" },
+	{ .compatible = "ti,omap4-cm2" },
+	{ .compatible = "ti,omap4-scrm" },
+	{ .compatible = "ti,omap5-prm" },
+	{ .compatible = "ti,omap5-cm-core-aon" },
+	{ .compatible = "ti,omap5-scrm" },
+	{ .compatible = "ti,omap5-cm-core" },
+	{ .compatible = "ti,dra7-prm" },
+	{ .compatible = "ti,dra7-cm-core-aon" },
+	{ .compatible = "ti,dra7-cm-core" },
+	{ }
+};
+
+static struct clk_hw_omap memmap_dummy_ck = {
+	.flags = MEMMAP_ADDRESSING,
+};
+
+static u32 prm_clk_readl(u32 *reg)
+{
+	return omap2_clk_readl(&memmap_dummy_ck, reg);
+}
+
+static void prm_clk_writel(u32 val, u32 *reg)
+{
+	omap2_clk_writel(val, &memmap_dummy_ck, reg);
+}
+
+static struct clk_ll_ops omap_clk_ll_ops = {
+	.clk_readl = prm_clk_readl,
+	.clk_writel = prm_clk_writel,
+};
+
+int __init of_prcm_init(void)
+{
+	struct device_node *np;
+	void __iomem *mem;
+	int memmap_index = 0;
+
+	ti_clk_ll_ops = &omap_clk_ll_ops;
+
+	for_each_matching_node(np, omap_prcm_dt_match_table) {
+		mem = of_iomap(np, 0);
+		clk_memmaps[memmap_index] = mem;
+		ti_dt_clk_init_provider(np, memmap_index);
+		memmap_index++;
+	}
+
+	ti_dt_clockdomains_setup();
+
+	return 0;
+}
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv11 43/49] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT

[Paul Walmsley]

On Thu, 19 Dec 2013, Tero Kristo wrote:

> This patch provides top level functionality for the DT clock initialization.
> Clock tree is initialized hierarchically starting from IP modules (CM/PRM/PRCM)
> going down towards individual clock nodes, and finally initializing
> clockdomains once all the clocks are ready.

So just to flag this as something we'll want to deal with later.  
The low-level CM* drivers should be responsible for registering CM* clocks 
and clockdomains.  Similarly the PRM* low-level drivers should only 
register PRM* clocks and clockdomains.  But it looks to me like we can 
rearrange this code later without any significant impact, unless you 
foresee any issues with that?  If not, in the interests of expediency, 
let's take that up in future patches.


- Paul

> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  arch/arm/mach-omap2/prm.h        |    1 +
>  arch/arm/mach-omap2/prm_common.c |   66 ++++++++++++++++++++++++++++++++++++++
>  2 files changed, 67 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
> index ac25ae6..623db40 100644
> --- a/arch/arm/mach-omap2/prm.h
> +++ b/arch/arm/mach-omap2/prm.h
> @@ -18,6 +18,7 @@
>  # ifndef __ASSEMBLER__
>  extern void __iomem *prm_base;
>  extern void omap2_set_globals_prm(void __iomem *prm);
> +int of_prcm_init(void);
>  # endif
>  
>  
> diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
> index a2e1174..835eb7d 100644
> --- a/arch/arm/mach-omap2/prm_common.c
> +++ b/arch/arm/mach-omap2/prm_common.c
> @@ -23,6 +23,10 @@
>  #include <linux/irq.h>
>  #include <linux/interrupt.h>
>  #include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clk/ti.h>
>  
>  #include "soc.h"
>  #include "prm2xxx_3xxx.h"
> @@ -30,6 +34,7 @@
>  #include "prm3xxx.h"
>  #include "prm44xx.h"
>  #include "common.h"
> +#include "clock.h"
>  
>  /*
>   * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
> @@ -464,3 +469,64 @@ int prm_unregister(struct prm_ll_data *pld)
>  
>  	return 0;
>  }
> +
> +static struct of_device_id omap_prcm_dt_match_table[] = {
> +	{ .compatible = "ti,am3-prcm" },
> +	{ .compatible = "ti,am3-scrm" },
> +	{ .compatible = "ti,am4-prcm" },
> +	{ .compatible = "ti,am4-scrm" },
> +	{ .compatible = "ti,omap3-prm" },
> +	{ .compatible = "ti,omap3-cm" },
> +	{ .compatible = "ti,omap3-scrm" },
> +	{ .compatible = "ti,omap4-cm1" },
> +	{ .compatible = "ti,omap4-prm" },
> +	{ .compatible = "ti,omap4-cm2" },
> +	{ .compatible = "ti,omap4-scrm" },
> +	{ .compatible = "ti,omap5-prm" },
> +	{ .compatible = "ti,omap5-cm-core-aon" },
> +	{ .compatible = "ti,omap5-scrm" },
> +	{ .compatible = "ti,omap5-cm-core" },
> +	{ .compatible = "ti,dra7-prm" },
> +	{ .compatible = "ti,dra7-cm-core-aon" },
> +	{ .compatible = "ti,dra7-cm-core" },
> +	{ }
> +};
> +
> +static struct clk_hw_omap memmap_dummy_ck = {
> +	.flags = MEMMAP_ADDRESSING,
> +};
> +
> +static u32 prm_clk_readl(u32 *reg)
> +{
> +	return omap2_clk_readl(&memmap_dummy_ck, reg);
> +}
> +
> +static void prm_clk_writel(u32 val, u32 *reg)
> +{
> +	omap2_clk_writel(val, &memmap_dummy_ck, reg);
> +}
> +
> +static struct clk_ll_ops omap_clk_ll_ops = {
> +	.clk_readl = prm_clk_readl,
> +	.clk_writel = prm_clk_writel,
> +};
> +
> +int __init of_prcm_init(void)
> +{
> +	struct device_node *np;
> +	void __iomem *mem;
> +	int memmap_index = 0;
> +
> +	ti_clk_ll_ops = &omap_clk_ll_ops;
> +
> +	for_each_matching_node(np, omap_prcm_dt_match_table) {
> +		mem = of_iomap(np, 0);
> +		clk_memmaps[memmap_index] = mem;
> +		ti_dt_clk_init_provider(np, memmap_index);
> +		memmap_index++;
> +	}
> +
> +	ti_dt_clockdomains_setup();
> +
> +	return 0;
> +}
> -- 
> 1.7.9.5
> 


- Paul

Re: [PATCHv11 43/49] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT

[Tero Kristo]

On 12/20/2013 01:49 PM, Paul Walmsley wrote:
> On Thu, 19 Dec 2013, Tero Kristo wrote:
>
>> This patch provides top level functionality for the DT clock initialization.
>> Clock tree is initialized hierarchically starting from IP modules (CM/PRM/PRCM)
>> going down towards individual clock nodes, and finally initializing
>> clockdomains once all the clocks are ready.
>
> So just to flag this as something we'll want to deal with later.
> The low-level CM* drivers should be responsible for registering CM* clocks
> and clockdomains.  Similarly the PRM* low-level drivers should only
> register PRM* clocks and clockdomains.  But it looks to me like we can
> rearrange this code later without any significant impact, unless you
> foresee any issues with that?  If not, in the interests of expediency,
> let's take that up in future patches.

Yeah, this can be split under cm/prm later on once we implement proper 
drivers for each block. DT data won't be changed, just kernel side 
implementation will be modified, and this modification is relatively 
simple to do also.

-Tero

>
>
> - Paul
>
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   arch/arm/mach-omap2/prm.h        |    1 +
>>   arch/arm/mach-omap2/prm_common.c |   66 ++++++++++++++++++++++++++++++++++++++
>>   2 files changed, 67 insertions(+)
>>
>> diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
>> index ac25ae6..623db40 100644
>> --- a/arch/arm/mach-omap2/prm.h
>> +++ b/arch/arm/mach-omap2/prm.h
>> @@ -18,6 +18,7 @@
>>   # ifndef __ASSEMBLER__
>>   extern void __iomem *prm_base;
>>   extern void omap2_set_globals_prm(void __iomem *prm);
>> +int of_prcm_init(void);
>>   # endif
>>
>>
>> diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
>> index a2e1174..835eb7d 100644
>> --- a/arch/arm/mach-omap2/prm_common.c
>> +++ b/arch/arm/mach-omap2/prm_common.c
>> @@ -23,6 +23,10 @@
>>   #include <linux/irq.h>
>>   #include <linux/interrupt.h>
>>   #include <linux/slab.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/clk/ti.h>
>>
>>   #include "soc.h"
>>   #include "prm2xxx_3xxx.h"
>> @@ -30,6 +34,7 @@
>>   #include "prm3xxx.h"
>>   #include "prm44xx.h"
>>   #include "common.h"
>> +#include "clock.h"
>>
>>   /*
>>    * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
>> @@ -464,3 +469,64 @@ int prm_unregister(struct prm_ll_data *pld)
>>
>>   	return 0;
>>   }
>> +
>> +static struct of_device_id omap_prcm_dt_match_table[] = {
>> +	{ .compatible = "ti,am3-prcm" },
>> +	{ .compatible = "ti,am3-scrm" },
>> +	{ .compatible = "ti,am4-prcm" },
>> +	{ .compatible = "ti,am4-scrm" },
>> +	{ .compatible = "ti,omap3-prm" },
>> +	{ .compatible = "ti,omap3-cm" },
>> +	{ .compatible = "ti,omap3-scrm" },
>> +	{ .compatible = "ti,omap4-cm1" },
>> +	{ .compatible = "ti,omap4-prm" },
>> +	{ .compatible = "ti,omap4-cm2" },
>> +	{ .compatible = "ti,omap4-scrm" },
>> +	{ .compatible = "ti,omap5-prm" },
>> +	{ .compatible = "ti,omap5-cm-core-aon" },
>> +	{ .compatible = "ti,omap5-scrm" },
>> +	{ .compatible = "ti,omap5-cm-core" },
>> +	{ .compatible = "ti,dra7-prm" },
>> +	{ .compatible = "ti,dra7-cm-core-aon" },
>> +	{ .compatible = "ti,dra7-cm-core" },
>> +	{ }
>> +};
>> +
>> +static struct clk_hw_omap memmap_dummy_ck = {
>> +	.flags = MEMMAP_ADDRESSING,
>> +};
>> +
>> +static u32 prm_clk_readl(u32 *reg)
>> +{
>> +	return omap2_clk_readl(&memmap_dummy_ck, reg);
>> +}
>> +
>> +static void prm_clk_writel(u32 val, u32 *reg)
>> +{
>> +	omap2_clk_writel(val, &memmap_dummy_ck, reg);
>> +}
>> +
>> +static struct clk_ll_ops omap_clk_ll_ops = {
>> +	.clk_readl = prm_clk_readl,
>> +	.clk_writel = prm_clk_writel,
>> +};
>> +
>> +int __init of_prcm_init(void)
>> +{
>> +	struct device_node *np;
>> +	void __iomem *mem;
>> +	int memmap_index = 0;
>> +
>> +	ti_clk_ll_ops = &omap_clk_ll_ops;
>> +
>> +	for_each_matching_node(np, omap_prcm_dt_match_table) {
>> +		mem = of_iomap(np, 0);
>> +		clk_memmaps[memmap_index] = mem;
>> +		ti_dt_clk_init_provider(np, memmap_index);
>> +		memmap_index++;
>> +	}
>> +
>> +	ti_dt_clockdomains_setup();
>> +
>> +	return 0;
>> +}
>> --
>> 1.7.9.5
>>
>
>
> - Paul
>

[PATCHv11 44/49] ARM: OMAP2+: io: use new clock init API

[Tero Kristo]

clk_init is now separated to a common function which gets called for all
SoC:s, which initializes the DT clocks and calls the SoC specific clock init.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 arch/arm/mach-omap2/common.h |    2 +-
 arch/arm/mach-omap2/io.c     |   32 +++++++++++++++++++++++---------
 arch/arm/mach-omap2/timer.c  |    6 ++----
 3 files changed, 26 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index e30ef67..5ccf36d 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -305,7 +305,7 @@ struct omap_hwmod;
 extern int omap_dss_reset(struct omap_hwmod *);
 
 /* SoC specific clock initializer */
-extern int (*omap_clk_init)(void);
+int omap_clk_init(void);
 
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3d9b3fc..7a394d7 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -55,10 +55,10 @@
 #include "prm44xx.h"
 
 /*
- * omap_clk_init: points to a function that does the SoC-specific
+ * omap_clk_soc_init: points to a function that does the SoC-specific
  * clock initializations
  */
-int (*omap_clk_init)(void);
+int (*omap_clk_soc_init)(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -419,7 +419,7 @@ void __init omap2420_init_early(void)
 	omap242x_clockdomains_init();
 	omap2420_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap2420_clk_init;
+	omap_clk_soc_init = omap2420_clk_init;
 }
 
 void __init omap2420_init_late(void)
@@ -448,7 +448,7 @@ void __init omap2430_init_early(void)
 	omap243x_clockdomains_init();
 	omap2430_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap2430_clk_init;
+	omap_clk_soc_init = omap2430_clk_init;
 }
 
 void __init omap2430_init_late(void)
@@ -482,7 +482,7 @@ void __init omap3_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap3xxx_clk_init;
+	omap_clk_soc_init = omap3xxx_clk_init;
 }
 
 void __init omap3430_init_early(void)
@@ -520,7 +520,7 @@ void __init ti81xx_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap3xxx_clk_init;
+	omap_clk_soc_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -581,7 +581,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = am33xx_clk_init;
+	omap_clk_soc_init = am33xx_clk_init;
 }
 
 void __init am33xx_init_late(void)
@@ -635,7 +635,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap4xxx_clk_init;
+	omap_clk_soc_init = omap4xxx_clk_init;
 }
 
 void __init omap4430_init_late(void)
@@ -666,7 +666,7 @@ void __init omap5_init_early(void)
 	omap54xx_clockdomains_init();
 	omap54xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_init = omap5xxx_dt_clk_init;
+	omap_clk_soc_init = omap5xxx_dt_clk_init;
 }
 
 void __init omap5_init_late(void)
@@ -711,3 +711,17 @@ void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 		_omap2_init_reprogram_sdrc();
 	}
 }
+
+int __init omap_clk_init(void)
+{
+	int ret = 0;
+
+	if (!omap_clk_soc_init)
+		return 0;
+
+	ret = of_prcm_init();
+	if (!ret)
+		ret = omap_clk_soc_init();
+
+	return ret;
+}
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 3ca81e0..60e5fc9 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -570,8 +570,7 @@ static inline void __init realtime_counter_init(void)
 			       clksrc_nr, clksrc_src, clksrc_prop)	\
 void __init omap##name##_gptimer_timer_init(void)			\
 {									\
-	if (omap_clk_init)						\
-		omap_clk_init();					\
+	omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src,		\
@@ -582,8 +581,7 @@ void __init omap##name##_gptimer_timer_init(void)			\
 				clksrc_nr, clksrc_src, clksrc_prop)	\
 void __init omap##name##_sync32k_timer_init(void)		\
 {									\
-	if (omap_clk_init)						\
-		omap_clk_init();					\
+	omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	/* Enable the use of clocksource="gp_timer" kernel parameter */	\
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv11 46/49] ARM: OMAP: DRA7: Enable clock init

[Tero Kristo]

Initializes clock data from device tree.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 arch/arm/mach-omap2/io.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5854677..628a7f5 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -692,6 +692,7 @@ void __init dra7xx_init_early(void)
 	dra7xx_clockdomains_init();
 	dra7xx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_clk_soc_init = dra7xx_dt_clk_init;
 }
 
 void __init dra7xx_init_late(void)
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv11 47/49] ARM: AM43xx: Enable clock init

[Tero Kristo]

Initializes clock data from device tree.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
---
 arch/arm/mach-omap2/io.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 628a7f5..36817d1 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -606,6 +606,7 @@ void __init am43xx_init_early(void)
 	am43xx_clockdomains_init();
 	am43xx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_clk_soc_init = am43xx_dt_clk_init;
 }
 
 void __init am43xx_init_late(void)
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv11 45/49] ARM: OMAP4: remove old clock data and link in new clock init code

[Tero Kristo]

OMAP4 clocks have now been moved to DT, thus remove the old data file
and use the new init code under drivers/clk/omap/clk-44xx.c.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile          |    2 +-
 arch/arm/mach-omap2/cclock44xx_data.c | 1735 ---------------------------------
 arch/arm/mach-omap2/io.c              |    2 +-
 3 files changed, 2 insertions(+), 1737 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/cclock44xx_data.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index adcef40..e9d63ec 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -186,7 +186,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clkt34xx_dpll3m2.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o cclock3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) cclock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
 obj-$(CONFIG_SOC_AM33XX)		+= cclock33xx_data.o
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
deleted file mode 100644
index ec0dc0b..0000000
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ /dev/null
@@ -1,1735 +0,0 @@
-/*
- * OMAP4 Clock data
- *
- * Copyright (C) 2009-2012 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- * Mike Turquette (mturquette@ti.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX Some of the ES1 clocks have been removed/changed; once support
- * is added for discriminating clocks by ES level, these should be added back
- * in.
- *
- * XXX All of the remaining MODULEMODE clock nodes should be removed
- * once the drivers are updated to use pm_runtime or to use the appropriate
- * upstream clock node for rate/parent selection.
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk-private.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "clock44xx.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-#include "cm-regbits-44xx.h"
-#include "prm44xx.h"
-#include "prm-regbits-44xx.h"
-#include "control.h"
-#include "scrm44xx.h"
-
-/* OMAP4 modulemode control */
-#define OMAP4430_MODULEMODE_HWCTRL_SHIFT		0
-#define OMAP4430_MODULEMODE_SWCTRL_SHIFT		1
-
-/*
- * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
- * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
- * must be set to 196.608 MHz" and hence, the DPLL locked frequency is
- * half of this value.
- */
-#define OMAP4_DPLL_ABE_DEFFREQ				98304000
-
-/*
- * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
- * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
- * locked frequency for the USB DPLL is 960MHz.
- */
-#define OMAP4_DPLL_USB_DEFFREQ				960000000
-
-/* Root clocks */
-
-DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(pad_clks_src_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_GATE(pad_clks_ck, "pad_clks_src_ck", &pad_clks_src_ck, 0x0,
-		OMAP4430_CM_CLKSEL_ABE, OMAP4430_PAD_CLKS_GATE_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_FIXED_RATE(pad_slimbus_core_clks_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(secure_32k_clk_src_ck, CLK_IS_ROOT, 32768, 0x0);
-
-DEFINE_CLK_FIXED_RATE(slimbus_src_clk, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_GATE(slimbus_clk, "slimbus_src_clk", &slimbus_src_clk, 0x0,
-		OMAP4430_CM_CLKSEL_ABE, OMAP4430_SLIMBUS_CLK_GATE_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_FIXED_RATE(sys_32k_ck, CLK_IS_ROOT, 32768, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_12000000_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_13000000_ck, CLK_IS_ROOT, 13000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_16800000_ck, CLK_IS_ROOT, 16800000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_19200000_ck, CLK_IS_ROOT, 19200000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_26000000_ck, CLK_IS_ROOT, 26000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_27000000_ck, CLK_IS_ROOT, 27000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_38400000_ck, CLK_IS_ROOT, 38400000, 0x0);
-
-static const char *sys_clkin_ck_parents[] = {
-	"virt_12000000_ck", "virt_13000000_ck", "virt_16800000_ck",
-	"virt_19200000_ck", "virt_26000000_ck", "virt_27000000_ck",
-	"virt_38400000_ck",
-};
-
-DEFINE_CLK_MUX(sys_clkin_ck, sys_clkin_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_SYS_CLKSEL, OMAP4430_SYS_CLKSEL_SHIFT,
-	       OMAP4430_SYS_CLKSEL_WIDTH, CLK_MUX_INDEX_ONE, NULL);
-
-DEFINE_CLK_FIXED_RATE(tie_low_clock_ck, CLK_IS_ROOT, 0, 0x0);
-
-DEFINE_CLK_FIXED_RATE(utmi_phy_clkout_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(xclk60mhsp1_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(xclk60mhsp2_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(xclk60motg_ck, CLK_IS_ROOT, 60000000, 0x0);
-
-/* Module clocks and DPLL outputs */
-
-static const char *abe_dpll_bypass_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "sys_32k_ck",
-};
-
-DEFINE_CLK_MUX(abe_dpll_bypass_clk_mux_ck, abe_dpll_bypass_clk_mux_ck_parents,
-	       NULL, 0x0, OMAP4430_CM_L4_WKUP_CLKSEL, OMAP4430_CLKSEL_SHIFT,
-	       OMAP4430_CLKSEL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_MUX(abe_dpll_refclk_mux_ck, abe_dpll_bypass_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_ABE_PLL_REF_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
-	       OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-/* DPLL_ABE */
-static struct dpll_data dpll_abe_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_ABE,
-	.clk_bypass	= &abe_dpll_bypass_clk_mux_ck,
-	.clk_ref	= &abe_dpll_refclk_mux_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_ABE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_ABE,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_ABE,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.m4xen_mask	= OMAP4430_DPLL_REGM4XEN_MASK,
-	.lpmode_mask	= OMAP4430_DPLL_LPMODE_EN_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-
-static const char *dpll_abe_ck_parents[] = {
-	"abe_dpll_refclk_mux_ck",
-};
-
-static struct clk dpll_abe_ck;
-
-static const struct clk_ops dpll_abe_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap4_dpll_regm4xen_recalc,
-	.round_rate	= &omap4_dpll_regm4xen_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_abe_ck_hw = {
-	.hw = {
-		.clk = &dpll_abe_ck,
-	},
-	.dpll_data	= &dpll_abe_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_abe_ck, dpll_abe_ck_parents, dpll_abe_ck_ops);
-
-static const char *dpll_abe_x2_ck_parents[] = {
-	"dpll_abe_ck",
-};
-
-static struct clk dpll_abe_x2_ck;
-
-static const struct clk_ops dpll_abe_x2_ck_ops = {
-	.recalc_rate	= &omap3_clkoutx2_recalc,
-};
-
-static struct clk_hw_omap dpll_abe_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_abe_x2_ck,
-	},
-	.flags		= CLOCK_CLKOUTX2,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
-	.ops		= &clkhwops_omap4_dpllmx,
-};
-
-DEFINE_STRUCT_CLK(dpll_abe_x2_ck, dpll_abe_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-static const struct clk_ops omap_hsdivider_ops = {
-	.set_rate	= &omap2_clksel_set_rate,
-	.recalc_rate	= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-};
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_abe_m2x2_ck, "dpll_abe_x2_ck", &dpll_abe_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M2_DPLL_ABE,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(abe_24m_fclk, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck,
-			0x0, 1, 8);
-
-DEFINE_CLK_DIVIDER(abe_clk, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_ABE, OMAP4430_CLKSEL_OPP_SHIFT,
-		   OMAP4430_CLKSEL_OPP_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_DIVIDER(aess_fclk, "abe_clk", &abe_clk, 0x0,
-		   OMAP4430_CM1_ABE_AESS_CLKCTRL,
-		   OMAP4430_CLKSEL_AESS_FCLK_SHIFT,
-		   OMAP4430_CLKSEL_AESS_FCLK_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_abe_m3x2_ck, "dpll_abe_x2_ck", &dpll_abe_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M3_DPLL_ABE,
-			  OMAP4430_DPLL_CLKOUTHIF_DIV_MASK);
-
-static const char *core_hsd_byp_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "dpll_abe_m3x2_ck",
-};
-
-DEFINE_CLK_MUX(core_hsd_byp_clk_mux_ck, core_hsd_byp_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_CLKSEL_DPLL_CORE,
-	       OMAP4430_DPLL_BYP_CLKSEL_SHIFT, OMAP4430_DPLL_BYP_CLKSEL_WIDTH,
-	       0x0, NULL);
-
-/* DPLL_CORE */
-static struct dpll_data dpll_core_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_CORE,
-	.clk_bypass	= &core_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_CORE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_CORE,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_CORE,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-
-static const char *dpll_core_ck_parents[] = {
-	"sys_clkin_ck", "core_hsd_byp_clk_mux_ck"
-};
-
-static struct clk dpll_core_ck;
-
-static const struct clk_ops dpll_core_ck_ops = {
-	.recalc_rate	= &omap3_dpll_recalc,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_core_ck_hw = {
-	.hw = {
-		.clk = &dpll_core_ck,
-	},
-	.dpll_data	= &dpll_core_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_core_ck, dpll_core_ck_parents, dpll_core_ck_ops);
-
-static const char *dpll_core_x2_ck_parents[] = {
-	"dpll_core_ck",
-};
-
-static struct clk dpll_core_x2_ck;
-
-static struct clk_hw_omap dpll_core_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_core_x2_ck,
-	},
-};
-
-DEFINE_STRUCT_CLK(dpll_core_x2_ck, dpll_core_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m6x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M6_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m2_ck, "dpll_core_ck", &dpll_core_ck, 0x0,
-			  OMAP4430_CM_DIV_M2_DPLL_CORE,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(ddrphy_ck, "dpll_core_m2_ck", &dpll_core_m2_ck, 0x0, 1,
-			2);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m5x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M5_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK);
-
-DEFINE_CLK_DIVIDER(div_core_ck, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_CORE_SHIFT,
-		   OMAP4430_CLKSEL_CORE_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
-		   0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, OMAP4430_CLKSEL_0_1_SHIFT,
-		   OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_DIVIDER(div_mpu_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
-		   0x0, OMAP4430_CM_BYPCLK_DPLL_MPU, OMAP4430_CLKSEL_0_1_SHIFT,
-		   OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m4x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M4_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(dll_clk_div_ck, "dpll_core_m4x2_ck", &dpll_core_m4x2_ck,
-			0x0, 1, 2);
-
-DEFINE_CLK_DIVIDER(dpll_abe_m2_ck, "dpll_abe_ck", &dpll_abe_ck, 0x0,
-		   OMAP4430_CM_DIV_M2_DPLL_ABE, OMAP4430_DPLL_CLKOUT_DIV_SHIFT,
-		   OMAP4430_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
-
-static const struct clk_ops dpll_hsd_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-	.is_enabled	= &omap2_dflt_clk_is_enabled,
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static const struct clk_ops func_dmic_abe_gfclk_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-};
-
-static const char *dpll_core_m3x2_ck_parents[] = {
-	"dpll_core_x2_ck",
-};
-
-static const struct clksel dpll_core_m3x2_div[] = {
-	{ .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-/* XXX Missing round_rate, set_rate in ops */
-DEFINE_CLK_OMAP_MUX_GATE(dpll_core_m3x2_ck, NULL, dpll_core_m3x2_div,
-			 OMAP4430_CM_DIV_M3_DPLL_CORE,
-			 OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
-			 OMAP4430_CM_DIV_M3_DPLL_CORE,
-			 OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, NULL,
-			 dpll_core_m3x2_ck_parents, dpll_hsd_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m7x2_ck, "dpll_core_x2_ck",
-			  &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M7_DPLL_CORE,
-			  OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK);
-
-static const char *iva_hsd_byp_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "div_iva_hs_clk",
-};
-
-DEFINE_CLK_MUX(iva_hsd_byp_clk_mux_ck, iva_hsd_byp_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_CLKSEL_DPLL_IVA, OMAP4430_DPLL_BYP_CLKSEL_SHIFT,
-	       OMAP4430_DPLL_BYP_CLKSEL_WIDTH, 0x0, NULL);
-
-/* DPLL_IVA */
-static struct dpll_data dpll_iva_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_IVA,
-	.clk_bypass	= &iva_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_IVA,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_IVA,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_IVA,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-static const char *dpll_iva_ck_parents[] = {
-	"sys_clkin_ck", "iva_hsd_byp_clk_mux_ck"
-};
-
-static struct clk dpll_iva_ck;
-
-static const struct clk_ops dpll_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_iva_ck_hw = {
-	.hw = {
-		.clk = &dpll_iva_ck,
-	},
-	.dpll_data	= &dpll_iva_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_iva_ck_parents, dpll_ck_ops);
-
-static const char *dpll_iva_x2_ck_parents[] = {
-	"dpll_iva_ck",
-};
-
-static struct clk dpll_iva_x2_ck;
-
-static struct clk_hw_omap dpll_iva_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_iva_x2_ck,
-	},
-};
-
-DEFINE_STRUCT_CLK(dpll_iva_x2_ck, dpll_iva_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_iva_m4x2_ck, "dpll_iva_x2_ck", &dpll_iva_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M4_DPLL_IVA,
-			  OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_iva_m5x2_ck, "dpll_iva_x2_ck", &dpll_iva_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M5_DPLL_IVA,
-			  OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK);
-
-/* DPLL_MPU */
-static struct dpll_data dpll_mpu_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_MPU,
-	.clk_bypass	= &div_mpu_hs_clk,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_MPU,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_MPU,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_MPU,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-static const char *dpll_mpu_ck_parents[] = {
-	"sys_clkin_ck", "div_mpu_hs_clk"
-};
-
-static struct clk dpll_mpu_ck;
-
-static struct clk_hw_omap dpll_mpu_ck_hw = {
-	.hw = {
-		.clk = &dpll_mpu_ck,
-	},
-	.dpll_data	= &dpll_mpu_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_mpu_ck_parents, dpll_ck_ops);
-
-DEFINE_CLK_FIXED_FACTOR(mpu_periphclk, "dpll_mpu_ck", &dpll_mpu_ck, 0x0, 1, 2);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_mpu_m2_ck, "dpll_mpu_ck", &dpll_mpu_ck, 0x0,
-			  OMAP4430_CM_DIV_M2_DPLL_MPU,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(per_hs_clk_div_ck, "dpll_abe_m3x2_ck",
-			&dpll_abe_m3x2_ck, 0x0, 1, 2);
-
-static const char *per_hsd_byp_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "per_hs_clk_div_ck",
-};
-
-DEFINE_CLK_MUX(per_hsd_byp_clk_mux_ck, per_hsd_byp_clk_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM_CLKSEL_DPLL_PER, OMAP4430_DPLL_BYP_CLKSEL_SHIFT,
-	       OMAP4430_DPLL_BYP_CLKSEL_WIDTH, 0x0, NULL);
-
-/* DPLL_PER */
-static struct dpll_data dpll_per_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_PER,
-	.clk_bypass	= &per_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_PER,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_PER,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_PER,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-static const char *dpll_per_ck_parents[] = {
-	"sys_clkin_ck", "per_hsd_byp_clk_mux_ck"
-};
-
-static struct clk dpll_per_ck;
-
-static struct clk_hw_omap dpll_per_ck_hw = {
-	.hw = {
-		.clk = &dpll_per_ck,
-	},
-	.dpll_data	= &dpll_per_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_per_ck, dpll_per_ck_parents, dpll_ck_ops);
-
-DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0,
-		   OMAP4430_CM_DIV_M2_DPLL_PER, OMAP4430_DPLL_CLKOUT_DIV_SHIFT,
-		   OMAP4430_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
-
-static const char *dpll_per_x2_ck_parents[] = {
-	"dpll_per_ck",
-};
-
-static struct clk dpll_per_x2_ck;
-
-static struct clk_hw_omap dpll_per_x2_ck_hw = {
-	.hw = {
-		.clk = &dpll_per_x2_ck,
-	},
-	.flags		= CLOCK_CLKOUTX2,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_PER,
-	.ops		= &clkhwops_omap4_dpllmx,
-};
-
-DEFINE_STRUCT_CLK(dpll_per_x2_ck, dpll_per_x2_ck_parents, dpll_abe_x2_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m2x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M2_DPLL_PER,
-			  OMAP4430_DPLL_CLKOUT_DIV_MASK);
-
-static const char *dpll_per_m3x2_ck_parents[] = {
-	"dpll_per_x2_ck",
-};
-
-static const struct clksel dpll_per_m3x2_div[] = {
-	{ .parent = &dpll_per_x2_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-/* XXX Missing round_rate, set_rate in ops */
-DEFINE_CLK_OMAP_MUX_GATE(dpll_per_m3x2_ck, NULL, dpll_per_m3x2_div,
-			 OMAP4430_CM_DIV_M3_DPLL_PER,
-			 OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
-			 OMAP4430_CM_DIV_M3_DPLL_PER,
-			 OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, NULL,
-			 dpll_per_m3x2_ck_parents, dpll_hsd_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m4x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M4_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m5x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M5_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m6x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M6_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m7x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
-			  0x0, OMAP4430_CM_DIV_M7_DPLL_PER,
-			  OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK);
-
-DEFINE_CLK_FIXED_FACTOR(usb_hs_clk_div_ck, "dpll_abe_m3x2_ck",
-			&dpll_abe_m3x2_ck, 0x0, 1, 3);
-
-/* DPLL_USB */
-static struct dpll_data dpll_usb_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_USB,
-	.clk_bypass	= &usb_hs_clk_div_ck,
-	.flags		= DPLL_J_TYPE,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_USB,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_USB,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_USB,
-	.mult_mask	= OMAP4430_DPLL_MULT_USB_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_0_7_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.sddiv_mask	= OMAP4430_DPLL_SD_DIV_MASK,
-	.max_multiplier	= 4095,
-	.max_divider	= 256,
-	.min_divider	= 1,
-};
-
-static const char *dpll_usb_ck_parents[] = {
-	"sys_clkin_ck", "usb_hs_clk_div_ck"
-};
-
-static struct clk dpll_usb_ck;
-
-static const struct clk_ops dpll_usb_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static struct clk_hw_omap dpll_usb_ck_hw = {
-	.hw = {
-		.clk = &dpll_usb_ck,
-	},
-	.dpll_data	= &dpll_usb_dd,
-	.clkdm_name	= "l3_init_clkdm",
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_usb_ck_ops);
-
-static const char *dpll_usb_clkdcoldo_ck_parents[] = {
-	"dpll_usb_ck",
-};
-
-static struct clk dpll_usb_clkdcoldo_ck;
-
-static const struct clk_ops dpll_usb_clkdcoldo_ck_ops = {
-};
-
-static struct clk_hw_omap dpll_usb_clkdcoldo_ck_hw = {
-	.hw = {
-		.clk = &dpll_usb_clkdcoldo_ck,
-	},
-	.clksel_reg	= OMAP4430_CM_CLKDCOLDO_DPLL_USB,
-	.ops		= &clkhwops_omap4_dpllmx,
-};
-
-DEFINE_STRUCT_CLK(dpll_usb_clkdcoldo_ck, dpll_usb_clkdcoldo_ck_parents,
-		  dpll_usb_clkdcoldo_ck_ops);
-
-DEFINE_CLK_OMAP_HSDIVIDER(dpll_usb_m2_ck, "dpll_usb_ck", &dpll_usb_ck, 0x0,
-			  OMAP4430_CM_DIV_M2_DPLL_USB,
-			  OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK);
-
-static const char *ducati_clk_mux_ck_parents[] = {
-	"div_core_ck", "dpll_per_m6x2_ck",
-};
-
-DEFINE_CLK_MUX(ducati_clk_mux_ck, ducati_clk_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT, OMAP4430_CLKSEL_0_0_SHIFT,
-	       OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_FIXED_FACTOR(func_12m_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			0x0, 1, 16);
-
-DEFINE_CLK_FIXED_FACTOR(func_24m_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0,
-			1, 4);
-
-DEFINE_CLK_FIXED_FACTOR(func_24mc_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			0x0, 1, 8);
-
-static const struct clk_div_table func_48m_fclk_rates[] = {
-	{ .div = 4, .val = 0 },
-	{ .div = 8, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(func_48m_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			 0x0, OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-			 OMAP4430_SCALE_FCLK_WIDTH, 0x0, func_48m_fclk_rates,
-			 NULL);
-
-DEFINE_CLK_FIXED_FACTOR(func_48mc_fclk,	"dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			0x0, 1, 4);
-
-static const struct clk_div_table func_64m_fclk_rates[] = {
-	{ .div = 2, .val = 0 },
-	{ .div = 4, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(func_64m_fclk, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck,
-			 0x0, OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-			 OMAP4430_SCALE_FCLK_WIDTH, 0x0, func_64m_fclk_rates,
-			 NULL);
-
-static const struct clk_div_table func_96m_fclk_rates[] = {
-	{ .div = 2, .val = 0 },
-	{ .div = 4, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(func_96m_fclk, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck,
-			 0x0, OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-			 OMAP4430_SCALE_FCLK_WIDTH, 0x0, func_96m_fclk_rates,
-			 NULL);
-
-static const struct clk_div_table init_60m_fclk_rates[] = {
-	{ .div = 1, .val = 0 },
-	{ .div = 8, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(init_60m_fclk, "dpll_usb_m2_ck", &dpll_usb_m2_ck,
-			 0x0, OMAP4430_CM_CLKSEL_USB_60MHZ,
-			 OMAP4430_CLKSEL_0_0_SHIFT, OMAP4430_CLKSEL_0_0_WIDTH,
-			 0x0, init_60m_fclk_rates, NULL);
-
-DEFINE_CLK_DIVIDER(l3_div_ck, "div_core_ck", &div_core_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_L3_SHIFT,
-		   OMAP4430_CLKSEL_L3_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(l4_div_ck, "l3_div_ck", &l3_div_ck, 0x0,
-		   OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_L4_SHIFT,
-		   OMAP4430_CLKSEL_L4_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_FIXED_FACTOR(lp_clk_div_ck, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck,
-			0x0, 1, 16);
-
-static const char *l4_wkup_clk_mux_ck_parents[] = {
-	"sys_clkin_ck", "lp_clk_div_ck",
-};
-
-DEFINE_CLK_MUX(l4_wkup_clk_mux_ck, l4_wkup_clk_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_L4_WKUP_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
-	       OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-static const struct clk_div_table ocp_abe_iclk_rates[] = {
-	{ .div = 2, .val = 0 },
-	{ .div = 1, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(ocp_abe_iclk, "aess_fclk", &aess_fclk, 0x0,
-			 OMAP4430_CM1_ABE_AESS_CLKCTRL,
-			 OMAP4430_CLKSEL_AESS_FCLK_SHIFT,
-			 OMAP4430_CLKSEL_AESS_FCLK_WIDTH,
-			 0x0, ocp_abe_iclk_rates, NULL);
-
-DEFINE_CLK_FIXED_FACTOR(per_abe_24m_fclk, "dpll_abe_m2_ck", &dpll_abe_m2_ck,
-			0x0, 1, 4);
-
-DEFINE_CLK_DIVIDER(per_abe_nc_fclk, "dpll_abe_m2_ck", &dpll_abe_m2_ck, 0x0,
-		   OMAP4430_CM_SCALE_FCLK, OMAP4430_SCALE_FCLK_SHIFT,
-		   OMAP4430_SCALE_FCLK_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(syc_clk_div_ck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
-		   OMAP4430_CM_ABE_DSS_SYS_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
-		   OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
-
-static const char *dbgclk_mux_ck_parents[] = {
-	"sys_clkin_ck"
-};
-
-static struct clk dbgclk_mux_ck;
-DEFINE_STRUCT_CLK_HW_OMAP(dbgclk_mux_ck, NULL);
-DEFINE_STRUCT_CLK(dbgclk_mux_ck, dbgclk_mux_ck_parents,
-		  dpll_usb_clkdcoldo_ck_ops);
-
-/* Leaf clocks controlled by modules */
-
-DEFINE_CLK_GATE(aes1_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L4SEC_AES1_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(aes2_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L4SEC_AES2_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(bandgap_fclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-		OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT, 0x0, NULL);
-
-static const struct clk_div_table div_ts_ck_rates[] = {
-	{ .div = 8, .val = 0 },
-	{ .div = 16, .val = 1 },
-	{ .div = 32, .val = 2 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(div_ts_ck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-			 0x0, OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-			 OMAP4430_CLKSEL_24_25_SHIFT,
-			 OMAP4430_CLKSEL_24_25_WIDTH, 0x0, div_ts_ck_rates,
-			 NULL);
-
-DEFINE_CLK_GATE(bandgap_ts_fclk, "div_ts_ck", &div_ts_ck, 0x0,
-		OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-		OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT,
-		0x0, NULL);
-
-static const char *dmic_sync_mux_ck_parents[] = {
-	"abe_24m_fclk", "syc_clk_div_ck", "func_24m_clk",
-};
-
-DEFINE_CLK_MUX(dmic_sync_mux_ck, dmic_sync_mux_ck_parents, NULL,
-	       0x0, OMAP4430_CM1_ABE_DMIC_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_dmic_abe_gfclk_sel[] = {
-	{ .parent = &dmic_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_dmic_abe_gfclk_parents[] = {
-	"dmic_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_dmic_abe_gfclk, "abe_clkdm", func_dmic_abe_gfclk_sel,
-		    OMAP4430_CM1_ABE_DMIC_CLKCTRL, OMAP4430_CLKSEL_SOURCE_MASK,
-		    func_dmic_abe_gfclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_GATE(dss_sys_clk, "syc_clk_div_ck", &syc_clk_div_ck, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(dss_tv_clk, "extalt_clkin_ck", &extalt_clkin_ck, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_TV_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck,
-		CLK_SET_RATE_PARENT,
-		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_OPTFCLKEN_DSSCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(dss_48mhz_clk, "func_48mc_fclk", &func_48mc_fclk, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(dss_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_DIVIDER(fdif_fck, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, 0x0,
-		   OMAP4430_CM_CAM_FDIF_CLKCTRL, OMAP4430_CLKSEL_FCLK_SHIFT,
-		   OMAP4430_CLKSEL_FCLK_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_GATE(gpio1_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
-		OMAP4430_OPTFCLKEN_DBCLK_SHIFT,	0x0, NULL);
-
-DEFINE_CLK_GATE(gpio2_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO2_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(gpio3_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
-		OMAP4430_OPTFCLKEN_DBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio4_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO4_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(gpio5_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO5_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(gpio6_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_L4PER_GPIO6_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-		0x0, NULL);
-
-static const struct clksel sgx_clk_mux_sel[] = {
-	{ .parent = &dpll_core_m7x2_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_per_m7x2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *sgx_clk_mux_parents[] = {
-	"dpll_core_m7x2_ck", "dpll_per_m7x2_ck",
-};
-
-DEFINE_CLK_OMAP_MUX(sgx_clk_mux, "l3_gfx_clkdm", sgx_clk_mux_sel,
-		    OMAP4430_CM_GFX_GFX_CLKCTRL, OMAP4430_CLKSEL_SGX_FCLK_MASK,
-		    sgx_clk_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_DIVIDER(hsi_fck, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, 0x0,
-		   OMAP4430_CM_L3INIT_HSI_CLKCTRL, OMAP4430_CLKSEL_24_25_SHIFT,
-		   OMAP4430_CLKSEL_24_25_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-DEFINE_CLK_GATE(iss_ctrlclk, "func_96m_fclk", &func_96m_fclk, 0x0,
-		OMAP4430_CM_CAM_ISS_CLKCTRL, OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_MUX(mcasp_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCASP_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcasp_abe_gfclk_sel[] = {
-	{ .parent = &mcasp_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcasp_abe_gfclk_parents[] = {
-	"mcasp_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcasp_abe_gfclk, "abe_clkdm", func_mcasp_abe_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCASP_CLKCTRL, OMAP4430_CLKSEL_SOURCE_MASK,
-		    func_mcasp_abe_gfclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_MUX(mcbsp1_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcbsp1_gfclk_sel[] = {
-	{ .parent = &mcbsp1_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcbsp1_gfclk_parents[] = {
-	"mcbsp1_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcbsp1_gfclk, "abe_clkdm", func_mcbsp1_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp1_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_MUX(mcbsp2_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcbsp2_gfclk_sel[] = {
-	{ .parent = &mcbsp2_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcbsp2_gfclk_parents[] = {
-	"mcbsp2_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcbsp2_gfclk, "abe_clkdm", func_mcbsp2_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp2_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_MUX(mcbsp3_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel func_mcbsp3_gfclk_sel[] = {
-	{ .parent = &mcbsp3_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *func_mcbsp3_gfclk_parents[] = {
-	"mcbsp3_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
-};
-
-DEFINE_CLK_OMAP_MUX(func_mcbsp3_gfclk, "abe_clkdm", func_mcbsp3_gfclk_sel,
-		    OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp3_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static const char *mcbsp4_sync_mux_ck_parents[] = {
-	"func_96m_fclk", "per_abe_nc_fclk",
-};
-
-DEFINE_CLK_MUX(mcbsp4_sync_mux_ck, mcbsp4_sync_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
-	       OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH, 0x0, NULL);
-
-static const struct clksel per_mcbsp4_gfclk_sel[] = {
-	{ .parent = &mcbsp4_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *per_mcbsp4_gfclk_parents[] = {
-	"mcbsp4_sync_mux_ck", "pad_clks_ck",
-};
-
-DEFINE_CLK_OMAP_MUX(per_mcbsp4_gfclk, "l4_per_clkdm", per_mcbsp4_gfclk_sel,
-		    OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
-		    OMAP4430_CLKSEL_SOURCE_24_24_MASK, per_mcbsp4_gfclk_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static const struct clksel hsmmc1_fclk_sel[] = {
-	{ .parent = &func_64m_fclk, .rates = div_1_0_rates },
-	{ .parent = &func_96m_fclk, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *hsmmc1_fclk_parents[] = {
-	"func_64m_fclk", "func_96m_fclk",
-};
-
-DEFINE_CLK_OMAP_MUX(hsmmc1_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
-		    OMAP4430_CM_L3INIT_MMC1_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
-		    OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
-		OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_fclk_1, "func_24m_clk", &func_24m_clk, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FCLK1_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_fclk_0, "abe_24m_fclk", &abe_24m_fclk, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FCLK0_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_fclk_2, "pad_clks_ck", &pad_clks_ck, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FCLK2_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus1_slimbus_clk, "slimbus_clk", &slimbus_clk, 0x0,
-		OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-		OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus2_fclk_1, "per_abe_24m_fclk", &per_abe_24m_fclk, 0x0,
-		OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-		OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus2_fclk_0, "func_24mc_fclk", &func_24mc_fclk, 0x0,
-		OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-		OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(slimbus2_slimbus_clk, "pad_slimbus_core_clks_ck",
-		&pad_slimbus_core_clks_ck, 0x0,
-		OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-		OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(smartreflex_core_fck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-		0x0, OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(smartreflex_iva_fck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-		0x0, OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(smartreflex_mpu_fck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
-		0x0, OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-static const struct clksel dmt1_clk_mux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-DEFINE_CLK_OMAP_MUX(dmt1_clk_mux, "l4_wkup_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_WKUP_TIMER1_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm10_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm11_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm2_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm3_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm4_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static const struct clksel timer5_sync_mux_sel[] = {
-	{ .parent = &syc_clk_div_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *timer5_sync_mux_parents[] = {
-	"syc_clk_div_ck", "sys_32k_ck",
-};
-
-DEFINE_CLK_OMAP_MUX(timer5_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER5_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(timer6_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER6_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(timer7_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER7_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(timer8_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
-		    OMAP4430_CM1_ABE_TIMER8_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
-
-DEFINE_CLK_OMAP_MUX(cm2_dm9_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
-		    OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, OMAP4430_CLKSEL_MASK,
-		    abe_dpll_bypass_clk_mux_ck_parents,
-		    func_dmic_abe_gfclk_ops);
-
-static struct clk usb_host_fs_fck;
-
-static const char *usb_host_fs_fck_parent_names[] = {
-	"func_48mc_fclk",
-};
-
-static const struct clk_ops usb_host_fs_fck_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-	.is_enabled	= &omap2_dflt_clk_is_enabled,
-};
-
-static struct clk_hw_omap usb_host_fs_fck_hw = {
-	.hw = {
-		.clk = &usb_host_fs_fck,
-	},
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-};
-
-DEFINE_STRUCT_CLK(usb_host_fs_fck, usb_host_fs_fck_parent_names,
-		  usb_host_fs_fck_ops);
-
-static const char *utmi_p1_gfclk_parents[] = {
-	"init_60m_fclk", "xclk60mhsp1_ck",
-};
-
-DEFINE_CLK_MUX(utmi_p1_gfclk, utmi_p1_gfclk_parents, NULL, 0x0,
-	       OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	       OMAP4430_CLKSEL_UTMI_P1_SHIFT, OMAP4430_CLKSEL_UTMI_P1_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_utmi_p1_clk, "utmi_p1_gfclk", &utmi_p1_gfclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT, 0x0, NULL);
-
-static const char *utmi_p2_gfclk_parents[] = {
-	"init_60m_fclk", "xclk60mhsp2_ck",
-};
-
-DEFINE_CLK_MUX(utmi_p2_gfclk, utmi_p2_gfclk_parents, NULL, 0x0,
-	       OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	       OMAP4430_CLKSEL_UTMI_P2_SHIFT, OMAP4430_CLKSEL_UTMI_P2_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_utmi_p2_clk, "utmi_p2_gfclk", &utmi_p2_gfclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_utmi_p3_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic480m_p1_clk, "dpll_usb_m2_ck",
-		&dpll_usb_m2_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic60m_p1_clk, "init_60m_fclk",
-		&init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic60m_p2_clk, "init_60m_fclk",
-		&init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_hsic480m_p2_clk, "dpll_usb_m2_ck",
-		&dpll_usb_m2_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_func48mclk, "func_48mc_fclk", &func_48mc_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_host_hs_fck, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-static const char *otg_60m_gfclk_parents[] = {
-	"utmi_phy_clkout_ck", "xclk60motg_ck",
-};
-
-DEFINE_CLK_MUX(otg_60m_gfclk, otg_60m_gfclk_parents, NULL, 0x0,
-	       OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, OMAP4430_CLKSEL_60M_SHIFT,
-	       OMAP4430_CLKSEL_60M_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_otg_hs_xclk, "otg_60m_gfclk", &otg_60m_gfclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
-		OMAP4430_OPTFCLKEN_XCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_otg_hs_ick, "l3_div_ck", &l3_div_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
-		OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_phy_cm_clk32k, "sys_32k_ck", &sys_32k_ck, 0x0,
-		OMAP4430_CM_ALWON_USBPHY_CLKCTRL,
-		OMAP4430_OPTFCLKEN_CLK32K_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_usb_ch2_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_usb_ch0_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_usb_ch1_clk, "init_60m_fclk", &init_60m_fclk, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(usb_tll_hs_ick, "l4_div_ck", &l4_div_ck, 0x0,
-		OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-		OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
-
-static const struct clk_div_table usim_ck_rates[] = {
-	{ .div = 14, .val = 0 },
-	{ .div = 18, .val = 1 },
-	{ .div = 0 },
-};
-DEFINE_CLK_DIVIDER_TABLE(usim_ck, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, 0x0,
-			 OMAP4430_CM_WKUP_USIM_CLKCTRL,
-			 OMAP4430_CLKSEL_DIV_SHIFT, OMAP4430_CLKSEL_DIV_WIDTH,
-			 0x0, usim_ck_rates, NULL);
-
-DEFINE_CLK_GATE(usim_fclk, "usim_ck", &usim_ck, 0x0,
-		OMAP4430_CM_WKUP_USIM_CLKCTRL, OMAP4430_OPTFCLKEN_FCLK_SHIFT,
-		0x0, NULL);
-
-/* Remaining optional clocks */
-static const char *pmd_stm_clock_mux_ck_parents[] = {
-	"sys_clkin_ck", "dpll_core_m6x2_ck", "tie_low_clock_ck",
-};
-
-DEFINE_CLK_MUX(pmd_stm_clock_mux_ck, pmd_stm_clock_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, OMAP4430_PMD_STM_MUX_CTRL_SHIFT,
-	       OMAP4430_PMD_STM_MUX_CTRL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_MUX(pmd_trace_clk_mux_ck, pmd_stm_clock_mux_ck_parents, NULL, 0x0,
-	       OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-	       OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT,
-	       OMAP4430_PMD_TRACE_MUX_CTRL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(stm_clk_div_ck, "pmd_stm_clock_mux_ck",
-		   &pmd_stm_clock_mux_ck, 0x0, OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-		   OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT,
-		   OMAP4430_CLKSEL_PMD_STM_CLK_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-static const char *trace_clk_div_ck_parents[] = {
-	"pmd_trace_clk_mux_ck",
-};
-
-static const struct clksel trace_clk_div_div[] = {
-	{ .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk trace_clk_div_ck;
-
-static const struct clk_ops trace_clk_div_ck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate,
-	.init		= &omap2_init_clk_clkdm,
-	.enable		= &omap2_clkops_enable_clkdm,
-	.disable	= &omap2_clkops_disable_clkdm,
-};
-
-static struct clk_hw_omap trace_clk_div_ck_hw = {
-	.hw = {
-		.clk = &trace_clk_div_ck,
-	},
-	.clkdm_name	= "emu_sys_clkdm",
-	.clksel		= trace_clk_div_div,
-	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
-};
-
-DEFINE_STRUCT_CLK(trace_clk_div_ck, trace_clk_div_ck_parents,
-		  trace_clk_div_ck_ops);
-
-/* SCRM aux clk nodes */
-
-static const struct clksel auxclk_src_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m3x2_ck, .rates = div_1_1_rates },
-	{ .parent = &dpll_per_m3x2_ck, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *auxclk_src_ck_parents[] = {
-	"sys_clkin_ck", "dpll_core_m3x2_ck", "dpll_per_m3x2_ck",
-};
-
-static const struct clk_ops auxclk_src_ck_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-	.is_enabled	= &omap2_dflt_clk_is_enabled,
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk0_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK0, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK0, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk0_ck, "auxclk0_src_ck", &auxclk0_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK0, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk1_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK1, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK1, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk1_ck, "auxclk1_src_ck", &auxclk1_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK1, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk2_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK2, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK2, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk2_ck, "auxclk2_src_ck", &auxclk2_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK2, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk3_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK3, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK3, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk3_ck, "auxclk3_src_ck", &auxclk3_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK3, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk4_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK4, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK4, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk4_ck, "auxclk4_src_ck", &auxclk4_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK4, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(auxclk5_src_ck, NULL, auxclk_src_sel,
-			 OMAP4_SCRM_AUXCLK5, OMAP4_SRCSELECT_MASK,
-			 OMAP4_SCRM_AUXCLK5, OMAP4_ENABLE_SHIFT, NULL,
-			 auxclk_src_ck_parents, auxclk_src_ck_ops);
-
-DEFINE_CLK_DIVIDER(auxclk5_ck, "auxclk5_src_ck", &auxclk5_src_ck, 0x0,
-		   OMAP4_SCRM_AUXCLK5, OMAP4_CLKDIV_SHIFT, OMAP4_CLKDIV_WIDTH,
-		   0x0, NULL);
-
-static const char *auxclkreq_ck_parents[] = {
-	"auxclk0_ck", "auxclk1_ck", "auxclk2_ck", "auxclk3_ck", "auxclk4_ck",
-	"auxclk5_ck",
-};
-
-DEFINE_CLK_MUX(auxclkreq0_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ0, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq1_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ1, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq2_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ2, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq3_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ3, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq4_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ4, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-DEFINE_CLK_MUX(auxclkreq5_ck, auxclkreq_ck_parents, NULL, 0x0,
-	       OMAP4_SCRM_AUXCLKREQ5, OMAP4_MAPPING_SHIFT, OMAP4_MAPPING_WIDTH,
-	       0x0, NULL);
-
-/*
- * clocks specific to omap4460
- */
-static struct omap_clk omap446x_clks[] = {
-	CLK(NULL,	"div_ts_ck",			&div_ts_ck),
-	CLK(NULL,	"bandgap_ts_fclk",		&bandgap_ts_fclk),
-};
-
-/*
- * clocks specific to omap4430
- */
-static struct omap_clk omap443x_clks[] = {
-	CLK(NULL,	"bandgap_fclk",			&bandgap_fclk),
-};
-
-/*
- * clocks common to omap44xx
- */
-static struct omap_clk omap44xx_clks[] = {
-	CLK(NULL,	"extalt_clkin_ck",		&extalt_clkin_ck),
-	CLK(NULL,	"pad_clks_src_ck",		&pad_clks_src_ck),
-	CLK(NULL,	"pad_clks_ck",			&pad_clks_ck),
-	CLK(NULL,	"pad_slimbus_core_clks_ck",	&pad_slimbus_core_clks_ck),
-	CLK(NULL,	"secure_32k_clk_src_ck",	&secure_32k_clk_src_ck),
-	CLK(NULL,	"slimbus_src_clk",		&slimbus_src_clk),
-	CLK(NULL,	"slimbus_clk",			&slimbus_clk),
-	CLK(NULL,	"sys_32k_ck",			&sys_32k_ck),
-	CLK(NULL,	"virt_12000000_ck",		&virt_12000000_ck),
-	CLK(NULL,	"virt_13000000_ck",		&virt_13000000_ck),
-	CLK(NULL,	"virt_16800000_ck",		&virt_16800000_ck),
-	CLK(NULL,	"virt_19200000_ck",		&virt_19200000_ck),
-	CLK(NULL,	"virt_26000000_ck",		&virt_26000000_ck),
-	CLK(NULL,	"virt_27000000_ck",		&virt_27000000_ck),
-	CLK(NULL,	"virt_38400000_ck",		&virt_38400000_ck),
-	CLK(NULL,	"sys_clkin_ck",			&sys_clkin_ck),
-	CLK(NULL,	"tie_low_clock_ck",		&tie_low_clock_ck),
-	CLK(NULL,	"utmi_phy_clkout_ck",		&utmi_phy_clkout_ck),
-	CLK(NULL,	"xclk60mhsp1_ck",		&xclk60mhsp1_ck),
-	CLK(NULL,	"xclk60mhsp2_ck",		&xclk60mhsp2_ck),
-	CLK(NULL,	"xclk60motg_ck",		&xclk60motg_ck),
-	CLK(NULL,	"abe_dpll_bypass_clk_mux_ck",	&abe_dpll_bypass_clk_mux_ck),
-	CLK(NULL,	"abe_dpll_refclk_mux_ck",	&abe_dpll_refclk_mux_ck),
-	CLK(NULL,	"dpll_abe_ck",			&dpll_abe_ck),
-	CLK(NULL,	"dpll_abe_x2_ck",		&dpll_abe_x2_ck),
-	CLK(NULL,	"dpll_abe_m2x2_ck",		&dpll_abe_m2x2_ck),
-	CLK(NULL,	"abe_24m_fclk",			&abe_24m_fclk),
-	CLK(NULL,	"abe_clk",			&abe_clk),
-	CLK(NULL,	"aess_fclk",			&aess_fclk),
-	CLK(NULL,	"dpll_abe_m3x2_ck",		&dpll_abe_m3x2_ck),
-	CLK(NULL,	"core_hsd_byp_clk_mux_ck",	&core_hsd_byp_clk_mux_ck),
-	CLK(NULL,	"dpll_core_ck",			&dpll_core_ck),
-	CLK(NULL,	"dpll_core_x2_ck",		&dpll_core_x2_ck),
-	CLK(NULL,	"dpll_core_m6x2_ck",		&dpll_core_m6x2_ck),
-	CLK(NULL,	"dbgclk_mux_ck",		&dbgclk_mux_ck),
-	CLK(NULL,	"dpll_core_m2_ck",		&dpll_core_m2_ck),
-	CLK(NULL,	"ddrphy_ck",			&ddrphy_ck),
-	CLK(NULL,	"dpll_core_m5x2_ck",		&dpll_core_m5x2_ck),
-	CLK(NULL,	"div_core_ck",			&div_core_ck),
-	CLK(NULL,	"div_iva_hs_clk",		&div_iva_hs_clk),
-	CLK(NULL,	"div_mpu_hs_clk",		&div_mpu_hs_clk),
-	CLK(NULL,	"dpll_core_m4x2_ck",		&dpll_core_m4x2_ck),
-	CLK(NULL,	"dll_clk_div_ck",		&dll_clk_div_ck),
-	CLK(NULL,	"dpll_abe_m2_ck",		&dpll_abe_m2_ck),
-	CLK(NULL,	"dpll_core_m3x2_ck",		&dpll_core_m3x2_ck),
-	CLK(NULL,	"dpll_core_m7x2_ck",		&dpll_core_m7x2_ck),
-	CLK(NULL,	"iva_hsd_byp_clk_mux_ck",	&iva_hsd_byp_clk_mux_ck),
-	CLK(NULL,	"dpll_iva_ck",			&dpll_iva_ck),
-	CLK(NULL,	"dpll_iva_x2_ck",		&dpll_iva_x2_ck),
-	CLK(NULL,	"dpll_iva_m4x2_ck",		&dpll_iva_m4x2_ck),
-	CLK(NULL,	"dpll_iva_m5x2_ck",		&dpll_iva_m5x2_ck),
-	CLK(NULL,	"dpll_mpu_ck",			&dpll_mpu_ck),
-	CLK(NULL,	"dpll_mpu_m2_ck",		&dpll_mpu_m2_ck),
-	CLK(NULL,	"per_hs_clk_div_ck",		&per_hs_clk_div_ck),
-	CLK(NULL,	"per_hsd_byp_clk_mux_ck",	&per_hsd_byp_clk_mux_ck),
-	CLK(NULL,	"dpll_per_ck",			&dpll_per_ck),
-	CLK(NULL,	"dpll_per_m2_ck",		&dpll_per_m2_ck),
-	CLK(NULL,	"dpll_per_x2_ck",		&dpll_per_x2_ck),
-	CLK(NULL,	"dpll_per_m2x2_ck",		&dpll_per_m2x2_ck),
-	CLK(NULL,	"dpll_per_m3x2_ck",		&dpll_per_m3x2_ck),
-	CLK(NULL,	"dpll_per_m4x2_ck",		&dpll_per_m4x2_ck),
-	CLK(NULL,	"dpll_per_m5x2_ck",		&dpll_per_m5x2_ck),
-	CLK(NULL,	"dpll_per_m6x2_ck",		&dpll_per_m6x2_ck),
-	CLK(NULL,	"dpll_per_m7x2_ck",		&dpll_per_m7x2_ck),
-	CLK(NULL,	"usb_hs_clk_div_ck",		&usb_hs_clk_div_ck),
-	CLK(NULL,	"dpll_usb_ck",			&dpll_usb_ck),
-	CLK(NULL,	"dpll_usb_clkdcoldo_ck",	&dpll_usb_clkdcoldo_ck),
-	CLK(NULL,	"dpll_usb_m2_ck",		&dpll_usb_m2_ck),
-	CLK(NULL,	"ducati_clk_mux_ck",		&ducati_clk_mux_ck),
-	CLK(NULL,	"func_12m_fclk",		&func_12m_fclk),
-	CLK(NULL,	"func_24m_clk",			&func_24m_clk),
-	CLK(NULL,	"func_24mc_fclk",		&func_24mc_fclk),
-	CLK(NULL,	"func_48m_fclk",		&func_48m_fclk),
-	CLK(NULL,	"func_48mc_fclk",		&func_48mc_fclk),
-	CLK(NULL,	"func_64m_fclk",		&func_64m_fclk),
-	CLK(NULL,	"func_96m_fclk",		&func_96m_fclk),
-	CLK(NULL,	"init_60m_fclk",		&init_60m_fclk),
-	CLK(NULL,	"l3_div_ck",			&l3_div_ck),
-	CLK(NULL,	"l4_div_ck",			&l4_div_ck),
-	CLK(NULL,	"lp_clk_div_ck",		&lp_clk_div_ck),
-	CLK(NULL,	"l4_wkup_clk_mux_ck",		&l4_wkup_clk_mux_ck),
-	CLK("smp_twd",	NULL,				&mpu_periphclk),
-	CLK(NULL,	"ocp_abe_iclk",			&ocp_abe_iclk),
-	CLK(NULL,	"per_abe_24m_fclk",		&per_abe_24m_fclk),
-	CLK(NULL,	"per_abe_nc_fclk",		&per_abe_nc_fclk),
-	CLK(NULL,	"syc_clk_div_ck",		&syc_clk_div_ck),
-	CLK(NULL,	"aes1_fck",			&aes1_fck),
-	CLK(NULL,	"aes2_fck",			&aes2_fck),
-	CLK(NULL,	"dmic_sync_mux_ck",		&dmic_sync_mux_ck),
-	CLK(NULL,	"func_dmic_abe_gfclk",		&func_dmic_abe_gfclk),
-	CLK(NULL,	"dss_sys_clk",			&dss_sys_clk),
-	CLK(NULL,	"dss_tv_clk",			&dss_tv_clk),
-	CLK(NULL,	"dss_dss_clk",			&dss_dss_clk),
-	CLK(NULL,	"dss_48mhz_clk",		&dss_48mhz_clk),
-	CLK(NULL,	"dss_fck",			&dss_fck),
-	CLK("omapdss_dss",	"ick",			&dss_fck),
-	CLK(NULL,	"fdif_fck",			&fdif_fck),
-	CLK(NULL,	"gpio1_dbclk",			&gpio1_dbclk),
-	CLK(NULL,	"gpio2_dbclk",			&gpio2_dbclk),
-	CLK(NULL,	"gpio3_dbclk",			&gpio3_dbclk),
-	CLK(NULL,	"gpio4_dbclk",			&gpio4_dbclk),
-	CLK(NULL,	"gpio5_dbclk",			&gpio5_dbclk),
-	CLK(NULL,	"gpio6_dbclk",			&gpio6_dbclk),
-	CLK(NULL,	"sgx_clk_mux",			&sgx_clk_mux),
-	CLK(NULL,	"hsi_fck",			&hsi_fck),
-	CLK(NULL,	"iss_ctrlclk",			&iss_ctrlclk),
-	CLK(NULL,	"mcasp_sync_mux_ck",		&mcasp_sync_mux_ck),
-	CLK(NULL,	"func_mcasp_abe_gfclk",		&func_mcasp_abe_gfclk),
-	CLK(NULL,	"mcbsp1_sync_mux_ck",		&mcbsp1_sync_mux_ck),
-	CLK(NULL,	"func_mcbsp1_gfclk",		&func_mcbsp1_gfclk),
-	CLK(NULL,	"mcbsp2_sync_mux_ck",		&mcbsp2_sync_mux_ck),
-	CLK(NULL,	"func_mcbsp2_gfclk",		&func_mcbsp2_gfclk),
-	CLK(NULL,	"mcbsp3_sync_mux_ck",		&mcbsp3_sync_mux_ck),
-	CLK(NULL,	"func_mcbsp3_gfclk",		&func_mcbsp3_gfclk),
-	CLK(NULL,	"mcbsp4_sync_mux_ck",		&mcbsp4_sync_mux_ck),
-	CLK(NULL,	"per_mcbsp4_gfclk",		&per_mcbsp4_gfclk),
-	CLK(NULL,	"hsmmc1_fclk",			&hsmmc1_fclk),
-	CLK(NULL,	"hsmmc2_fclk",			&hsmmc2_fclk),
-	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m),
-	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck),
-	CLK(NULL,	"slimbus1_fclk_1",		&slimbus1_fclk_1),
-	CLK(NULL,	"slimbus1_fclk_0",		&slimbus1_fclk_0),
-	CLK(NULL,	"slimbus1_fclk_2",		&slimbus1_fclk_2),
-	CLK(NULL,	"slimbus1_slimbus_clk",		&slimbus1_slimbus_clk),
-	CLK(NULL,	"slimbus2_fclk_1",		&slimbus2_fclk_1),
-	CLK(NULL,	"slimbus2_fclk_0",		&slimbus2_fclk_0),
-	CLK(NULL,	"slimbus2_slimbus_clk",		&slimbus2_slimbus_clk),
-	CLK(NULL,	"smartreflex_core_fck",		&smartreflex_core_fck),
-	CLK(NULL,	"smartreflex_iva_fck",		&smartreflex_iva_fck),
-	CLK(NULL,	"smartreflex_mpu_fck",		&smartreflex_mpu_fck),
-	CLK(NULL,	"dmt1_clk_mux",			&dmt1_clk_mux),
-	CLK(NULL,	"cm2_dm10_mux",			&cm2_dm10_mux),
-	CLK(NULL,	"cm2_dm11_mux",			&cm2_dm11_mux),
-	CLK(NULL,	"cm2_dm2_mux",			&cm2_dm2_mux),
-	CLK(NULL,	"cm2_dm3_mux",			&cm2_dm3_mux),
-	CLK(NULL,	"cm2_dm4_mux",			&cm2_dm4_mux),
-	CLK(NULL,	"timer5_sync_mux",		&timer5_sync_mux),
-	CLK(NULL,	"timer6_sync_mux",		&timer6_sync_mux),
-	CLK(NULL,	"timer7_sync_mux",		&timer7_sync_mux),
-	CLK(NULL,	"timer8_sync_mux",		&timer8_sync_mux),
-	CLK(NULL,	"cm2_dm9_mux",			&cm2_dm9_mux),
-	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck),
-	CLK("usbhs_omap",	"fs_fck",		&usb_host_fs_fck),
-	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk),
-	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk),
-	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk),
-	CLK(NULL,	"usb_host_hs_utmi_p2_clk",	&usb_host_hs_utmi_p2_clk),
-	CLK(NULL,	"usb_host_hs_utmi_p3_clk",	&usb_host_hs_utmi_p3_clk),
-	CLK(NULL,	"usb_host_hs_hsic480m_p1_clk",	&usb_host_hs_hsic480m_p1_clk),
-	CLK(NULL,	"usb_host_hs_hsic60m_p1_clk",	&usb_host_hs_hsic60m_p1_clk),
-	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk),
-	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk),
-	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk),
-	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck),
-	CLK("usbhs_omap",	"hs_fck",		&usb_host_hs_fck),
-	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk),
-	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk),
-	CLK(NULL,	"usb_otg_hs_ick",		&usb_otg_hs_ick),
-	CLK("musb-omap2430",	"ick",			&usb_otg_hs_ick),
-	CLK(NULL,	"usb_phy_cm_clk32k",		&usb_phy_cm_clk32k),
-	CLK(NULL,	"usb_tll_hs_usb_ch2_clk",	&usb_tll_hs_usb_ch2_clk),
-	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk),
-	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk),
-	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick),
-	CLK("usbhs_omap",	"usbtll_ick",		&usb_tll_hs_ick),
-	CLK("usbhs_tll",	"usbtll_ick",		&usb_tll_hs_ick),
-	CLK(NULL,	"usim_ck",			&usim_ck),
-	CLK(NULL,	"usim_fclk",			&usim_fclk),
-	CLK(NULL,	"pmd_stm_clock_mux_ck",		&pmd_stm_clock_mux_ck),
-	CLK(NULL,	"pmd_trace_clk_mux_ck",		&pmd_trace_clk_mux_ck),
-	CLK(NULL,	"stm_clk_div_ck",		&stm_clk_div_ck),
-	CLK(NULL,	"trace_clk_div_ck",		&trace_clk_div_ck),
-	CLK(NULL,	"auxclk0_src_ck",		&auxclk0_src_ck),
-	CLK(NULL,	"auxclk0_ck",			&auxclk0_ck),
-	CLK(NULL,	"auxclkreq0_ck",		&auxclkreq0_ck),
-	CLK(NULL,	"auxclk1_src_ck",		&auxclk1_src_ck),
-	CLK(NULL,	"auxclk1_ck",			&auxclk1_ck),
-	CLK(NULL,	"auxclkreq1_ck",		&auxclkreq1_ck),
-	CLK(NULL,	"auxclk2_src_ck",		&auxclk2_src_ck),
-	CLK(NULL,	"auxclk2_ck",			&auxclk2_ck),
-	CLK(NULL,	"auxclkreq2_ck",		&auxclkreq2_ck),
-	CLK(NULL,	"auxclk3_src_ck",		&auxclk3_src_ck),
-	CLK(NULL,	"auxclk3_ck",			&auxclk3_ck),
-	CLK(NULL,	"auxclkreq3_ck",		&auxclkreq3_ck),
-	CLK(NULL,	"auxclk4_src_ck",		&auxclk4_src_ck),
-	CLK(NULL,	"auxclk4_ck",			&auxclk4_ck),
-	CLK(NULL,	"auxclkreq4_ck",		&auxclkreq4_ck),
-	CLK(NULL,	"auxclk5_src_ck",		&auxclk5_src_ck),
-	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck),
-	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck),
-	CLK("50000000.gpmc",	"fck",			&dummy_ck),
-	CLK("omap_i2c.1",	"ick",			&dummy_ck),
-	CLK("omap_i2c.2",	"ick",			&dummy_ck),
-	CLK("omap_i2c.3",	"ick",			&dummy_ck),
-	CLK("omap_i2c.4",	"ick",			&dummy_ck),
-	CLK(NULL,	"mailboxes_ick",		&dummy_ck),
-	CLK("omap_hsmmc.0",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.1",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.2",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.3",	"ick",			&dummy_ck),
-	CLK("omap_hsmmc.4",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.1",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.2",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.3",	"ick",			&dummy_ck),
-	CLK("omap-mcbsp.4",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.1",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.2",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.3",	"ick",			&dummy_ck),
-	CLK("omap2_mcspi.4",	"ick",			&dummy_ck),
-	CLK(NULL,	"uart1_ick",			&dummy_ck),
-	CLK(NULL,	"uart2_ick",			&dummy_ck),
-	CLK(NULL,	"uart3_ick",			&dummy_ck),
-	CLK(NULL,	"uart4_ick",			&dummy_ck),
-	CLK("usbhs_omap",	"usbhost_ick",		&dummy_ck),
-	CLK("usbhs_omap",	"usbtll_fck",		&dummy_ck),
-	CLK("usbhs_tll",	"usbtll_fck",		&dummy_ck),
-	CLK("omap_wdt",	"ick",				&dummy_ck),
-	CLK(NULL,	"timer_32k_ck",	&sys_32k_ck),
-	/* TODO: Remove "omap_timer.X" aliases once DT migration is complete */
-	CLK("omap_timer.1",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.2",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.3",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.4",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.9",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.10",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.11",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("omap_timer.5",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("omap_timer.6",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("omap_timer.7",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("omap_timer.8",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4a318000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48032000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48034000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48036000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("4803e000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48086000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("48088000.timer",	"timer_sys_ck",	&sys_clkin_ck),
-	CLK("40138000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4013a000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4013c000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK("4013e000.timer",	"timer_sys_ck",	&syc_clk_div_ck),
-	CLK(NULL,	"cpufreq_ck",	&dpll_mpu_ck),
-};
-
-int __init omap4xxx_clk_init(void)
-{
-	int rc;
-
-	if (cpu_is_omap443x()) {
-		cpu_mask = RATE_IN_4430;
-		omap_clocks_register(omap443x_clks, ARRAY_SIZE(omap443x_clks));
-	} else if (cpu_is_omap446x() || cpu_is_omap447x()) {
-		cpu_mask = RATE_IN_4460 | RATE_IN_4430;
-		omap_clocks_register(omap446x_clks, ARRAY_SIZE(omap446x_clks));
-		if (cpu_is_omap447x())
-			pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
-	} else {
-		return 0;
-	}
-
-	omap_clocks_register(omap44xx_clks, ARRAY_SIZE(omap44xx_clks));
-
-	omap2_clk_disable_autoidle_all();
-
-	/*
-	 * A set rate of ABE DPLL inturn triggers a set rate of USB DPLL
-	 * when its in bypass. So always lock USB before ABE DPLL.
-	 */
-	/*
-	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
-	 * domain can transition to retention state when not in use.
-	 */
-	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
-	if (rc)
-		pr_err("%s: failed to configure USB DPLL!\n", __func__);
-
-	/*
-	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
-	 * state when turning the ABE clock domain. Workaround this by
-	 * locking the ABE DPLL on boot.
-	 * Lock the ABE DPLL in any case to avoid issues with audio.
-	 */
-	rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
-	if (!rc)
-		rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
-	if (rc)
-		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7a394d7..5854677 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -635,7 +635,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_soc_init = omap4xxx_clk_init;
+	omap_clk_soc_init = omap4xxx_dt_clk_init;
 }
 
 void __init omap4430_init_late(void)
-- 
1.7.9.5

[PATCHv11 48/49] ARM: AM33xx: remove old clock data and link in new clock init code

[Tero Kristo]

AM33xx clocks have now been moved to DT, thus remove the old data file
and use the new init code under OMAP clock driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile          |    1 -
 arch/arm/mach-omap2/cclock33xx_data.c | 1064 ---------------------------------
 arch/arm/mach-omap2/io.c              |    2 +-
 3 files changed, 1 insertion(+), 1066 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/cclock33xx_data.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e9d63ec..088305f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -189,7 +189,6 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX)		+= cclock33xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
 obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 
diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c
deleted file mode 100644
index 865d30e..0000000
--- a/arch/arm/mach-omap2/cclock33xx_data.c
+++ /dev/null
@@ -1,1064 +0,0 @@
-/*
- * AM33XX Clock data
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk-private.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-
-#include "am33xx.h"
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "control.h"
-#include "cm.h"
-#include "cm33xx.h"
-#include "cm-regbits-33xx.h"
-#include "prm.h"
-
-/* Modulemode control */
-#define AM33XX_MODULEMODE_HWCTRL_SHIFT		0
-#define AM33XX_MODULEMODE_SWCTRL_SHIFT		1
-
-/*LIST_HEAD(clocks);*/
-
-/* Root clocks */
-
-/* RTC 32k */
-DEFINE_CLK_FIXED_RATE(clk_32768_ck, CLK_IS_ROOT, 32768, 0x0);
-
-/* On-Chip 32KHz RC OSC */
-DEFINE_CLK_FIXED_RATE(clk_rc32k_ck, CLK_IS_ROOT, 32000, 0x0);
-
-/* Crystal input clks */
-DEFINE_CLK_FIXED_RATE(virt_19200000_ck, CLK_IS_ROOT, 19200000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_24000000_ck, CLK_IS_ROOT, 24000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_25000000_ck, CLK_IS_ROOT, 25000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_26000000_ck, CLK_IS_ROOT, 26000000, 0x0);
-
-/* Oscillator clock */
-/* 19.2, 24, 25 or 26 MHz */
-static const char *sys_clkin_ck_parents[] = {
-	"virt_19200000_ck", "virt_24000000_ck", "virt_25000000_ck",
-	"virt_26000000_ck",
-};
-
-/*
- * sys_clk in: input to the dpll and also used as funtional clock for,
- *   adc_tsc, smartreflex0-1, timer1-7, mcasp0-1, dcan0-1, cefuse
- *
- */
-DEFINE_CLK_MUX(sys_clkin_ck, sys_clkin_ck_parents, NULL, 0x0,
-	       AM33XX_CTRL_REGADDR(AM33XX_CONTROL_STATUS),
-	       AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT,
-	       AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH,
-	       0, NULL);
-
-/* External clock - 12 MHz */
-DEFINE_CLK_FIXED_RATE(tclkin_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-/* Module clocks and DPLL outputs */
-
-/* DPLL_CORE */
-static struct dpll_data dpll_core_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_CORE,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_CORE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_CORE,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKDCOLDO output */
-static const char *dpll_core_ck_parents[] = {
-	"sys_clkin_ck",
-};
-
-static struct clk dpll_core_ck;
-
-static const struct clk_ops dpll_core_ck_ops = {
-	.recalc_rate	= &omap3_dpll_recalc,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_core_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_core_ck,
-	},
-	.dpll_data	= &dpll_core_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_core_ck, dpll_core_ck_parents, dpll_core_ck_ops);
-
-static const char *dpll_core_x2_ck_parents[] = {
-	"dpll_core_ck",
-};
-
-static struct clk dpll_core_x2_ck;
-
-static const struct clk_ops dpll_x2_ck_ops = {
-	.recalc_rate	= &omap3_clkoutx2_recalc,
-};
-
-static struct clk_hw_omap dpll_core_x2_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_core_x2_ck,
-	},
-	.flags		= CLOCK_CLKOUTX2,
-};
-
-DEFINE_STRUCT_CLK(dpll_core_x2_ck, dpll_core_x2_ck_parents, dpll_x2_ck_ops);
-
-DEFINE_CLK_DIVIDER(dpll_core_m4_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M4_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH, CLK_DIVIDER_ONE_BASED,
-		   NULL);
-
-DEFINE_CLK_DIVIDER(dpll_core_m5_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M5_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-DEFINE_CLK_DIVIDER(dpll_core_m6_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M6_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-
-/* DPLL_MPU */
-static struct dpll_data dpll_mpu_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_MPU,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_MPU,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_MPU,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_mpu_ck;
-
-static const struct clk_ops dpll_mpu_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_mpu_ck_hw = {
-	.hw = {
-		.clk	= &dpll_mpu_ck,
-	},
-	.dpll_data	= &dpll_mpu_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_mpu_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_mpu_m2_ck, "dpll_mpu_ck", &dpll_mpu_ck,
-		   0x0, AM33XX_CM_DIV_M2_DPLL_MPU, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
-		   AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
-
-/* DPLL_DDR */
-static struct dpll_data dpll_ddr_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_DDR,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_DDR,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_DDR,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_ddr_ck;
-
-static const struct clk_ops dpll_ddr_ck_ops = {
-	.recalc_rate	= &omap3_dpll_recalc,
-	.get_parent	= &omap2_init_dpll_parent,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-};
-
-static struct clk_hw_omap dpll_ddr_ck_hw = {
-	.hw = {
-		.clk	= &dpll_ddr_ck,
-	},
-	.dpll_data	= &dpll_ddr_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_ddr_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_ddr_m2_ck, "dpll_ddr_ck", &dpll_ddr_ck,
-		   0x0, AM33XX_CM_DIV_M2_DPLL_DDR,
-		   AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-/* emif_fck functional clock */
-DEFINE_CLK_FIXED_FACTOR(dpll_ddr_m2_div2_ck, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck,
-			0x0, 1, 2);
-
-/* DPLL_DISP */
-static struct dpll_data dpll_disp_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_DISP,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_DISP,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_DISP,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_disp_ck;
-
-static struct clk_hw_omap dpll_disp_ck_hw = {
-	.hw = {
-		.clk	= &dpll_disp_ck,
-	},
-	.dpll_data	= &dpll_disp_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_disp_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck,
-		   CLK_SET_RATE_PARENT, AM33XX_CM_DIV_M2_DPLL_DISP,
-		   AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-/* DPLL_PER */
-static struct dpll_data dpll_per_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_PERIPH,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_PER,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_PER,
-	.mult_mask	= AM33XX_DPLL_MULT_PERIPH_MASK,
-	.div1_mask	= AM33XX_DPLL_PER_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-	.flags		= DPLL_J_TYPE,
-};
-
-/* CLKDCOLDO */
-static struct clk dpll_per_ck;
-
-static struct clk_hw_omap dpll_per_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_per_ck,
-	},
-	.dpll_data	= &dpll_per_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/* CLKOUT: fdpll/M2 */
-DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0,
-		   AM33XX_CM_DIV_M2_DPLL_PER, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
-		   AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED,
-		   NULL);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_wkupdm_ck, "dpll_per_m2_ck",
-			&dpll_per_m2_ck, 0x0, 1, 4);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_ck, "dpll_per_m2_ck",
-			&dpll_per_m2_ck, 0x0, 1, 4);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_core_m4_div2_ck, "dpll_core_m4_ck",
-			&dpll_core_m4_ck, 0x0, 1, 2);
-
-DEFINE_CLK_FIXED_FACTOR(l4_rtc_gclk, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
-			1, 2);
-
-DEFINE_CLK_FIXED_FACTOR(clk_24mhz, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1,
-			8);
-
-/*
- * Below clock nodes describes clockdomains derived out
- * of core clock.
- */
-static const struct clk_ops clk_ops_null = {
-};
-
-static const char *l3_gclk_parents[] = {
-	"dpll_core_m4_ck"
-};
-
-static struct clk l3_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l3_gclk, NULL);
-DEFINE_STRUCT_CLK(l3_gclk, l3_gclk_parents, clk_ops_null);
-
-static struct clk l4hs_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4hs_gclk, NULL);
-DEFINE_STRUCT_CLK(l4hs_gclk, l3_gclk_parents, clk_ops_null);
-
-static const char *l3s_gclk_parents[] = {
-	"dpll_core_m4_div2_ck"
-};
-
-static struct clk l3s_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l3s_gclk, NULL);
-DEFINE_STRUCT_CLK(l3s_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk l4fw_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4fw_gclk, NULL);
-DEFINE_STRUCT_CLK(l4fw_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk l4ls_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4ls_gclk, NULL);
-DEFINE_STRUCT_CLK(l4ls_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk sysclk_div_ck;
-DEFINE_STRUCT_CLK_HW_OMAP(sysclk_div_ck, NULL);
-DEFINE_STRUCT_CLK(sysclk_div_ck, l3_gclk_parents, clk_ops_null);
-
-/*
- * In order to match the clock domain with hwmod clockdomain entry,
- * separate clock nodes is required for the modules which are
- * directly getting their funtioncal clock from sys_clkin.
- */
-static struct clk adc_tsc_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(adc_tsc_fck, NULL);
-DEFINE_STRUCT_CLK(adc_tsc_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk dcan0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(dcan0_fck, NULL);
-DEFINE_STRUCT_CLK(dcan0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk dcan1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(dcan1_fck, NULL);
-DEFINE_STRUCT_CLK(dcan1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk mcasp0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(mcasp0_fck, NULL);
-DEFINE_STRUCT_CLK(mcasp0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk mcasp1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(mcasp1_fck, NULL);
-DEFINE_STRUCT_CLK(mcasp1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk smartreflex0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(smartreflex0_fck, NULL);
-DEFINE_STRUCT_CLK(smartreflex0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk smartreflex1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(smartreflex1_fck, NULL);
-DEFINE_STRUCT_CLK(smartreflex1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk sha0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(sha0_fck, NULL);
-DEFINE_STRUCT_CLK(sha0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk aes0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(aes0_fck, NULL);
-DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk rng_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(rng_fck, NULL);
-DEFINE_STRUCT_CLK(rng_fck, dpll_core_ck_parents, clk_ops_null);
-
-/*
- * Modules clock nodes
- *
- * The following clock leaf nodes are added for the moment because:
- *
- *  - hwmod data is not present for these modules, either hwmod
- *    control is not required or its not populated.
- *  - Driver code is not yet migrated to use hwmod/runtime pm
- *  - Modules outside kernel access (to disable them by default)
- *
- *     - mmu (gfx domain)
- *     - cefuse
- *     - usbotg_fck (its additional clock and not really a modulemode)
- *     - ieee5000
- */
-
-DEFINE_CLK_GATE(mmu_fck, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
-		AM33XX_CM_GFX_MMUDATA_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
-		AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
-
-/*
- * clkdiv32 is generated from fixed division of 732.4219
- */
-DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732);
-
-static struct clk clkdiv32k_ick;
-
-static const char *clkdiv32k_ick_parent_names[] = {
-	"clkdiv32k_ck",
-};
-
-static const struct clk_ops clkdiv32k_ick_ops = {
-	.enable         = &omap2_dflt_clk_enable,
-	.disable        = &omap2_dflt_clk_disable,
-	.is_enabled     = &omap2_dflt_clk_is_enabled,
-	.init           = &omap2_init_clk_clkdm,
-};
-
-static struct clk_hw_omap clkdiv32k_ick_hw = {
-	.hw	= {
-		.clk	= &clkdiv32k_ick,
-	},
-	.enable_reg	= AM33XX_CM_PER_CLKDIV32K_CLKCTRL,
-	.enable_bit	= AM33XX_MODULEMODE_SWCTRL_SHIFT,
-	.clkdm_name	= "clk_24mhz_clkdm",
-};
-
-DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops);
-
-/* "usbotg_fck" is an additional clock and not really a modulemode */
-DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0,
-		AM33XX_CM_CLKDCOLDO_DPLL_PER, AM33XX_ST_DPLL_CLKDCOLDO_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(ieee5000_fck, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck,
-		0x0, AM33XX_CM_PER_IEEE5000_CLKCTRL,
-		AM33XX_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-/* Timers */
-static const struct clksel timer1_clkmux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
-	{ .parent = &tclkin_ck, .rates = div_1_2_rates },
-	{ .parent = &clk_rc32k_ck, .rates = div_1_3_rates },
-	{ .parent = &clk_32768_ck, .rates = div_1_4_rates },
-	{ .parent = NULL },
-};
-
-static const char *timer1_ck_parents[] = {
-	"sys_clkin_ck", "clkdiv32k_ick", "tclkin_ck", "clk_rc32k_ck",
-	"clk_32768_ck",
-};
-
-static struct clk timer1_fck;
-
-static const struct clk_ops timer1_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static struct clk_hw_omap timer1_fck_hw = {
-	.hw	= {
-		.clk	= &timer1_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer1_clkmux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER1MS_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_2_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer1_fck, timer1_ck_parents, timer1_fck_ops);
-
-static const struct clksel timer2_to_7_clk_sel[] = {
-	{ .parent = &tclkin_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_clkin_ck, .rates = div_1_1_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *timer2_to_7_ck_parents[] = {
-	"tclkin_ck", "sys_clkin_ck", "clkdiv32k_ick",
-};
-
-static struct clk timer2_fck;
-
-static struct clk_hw_omap timer2_fck_hw = {
-	.hw	= {
-		.clk	= &timer2_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER2_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer2_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer3_fck;
-
-static struct clk_hw_omap timer3_fck_hw = {
-	.hw	= {
-		.clk	= &timer3_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER3_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer3_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer4_fck;
-
-static struct clk_hw_omap timer4_fck_hw = {
-	.hw	= {
-		.clk	= &timer4_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER4_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer4_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer5_fck;
-
-static struct clk_hw_omap timer5_fck_hw = {
-	.hw	= {
-		.clk	= &timer5_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER5_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer5_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer6_fck;
-
-static struct clk_hw_omap timer6_fck_hw = {
-	.hw	= {
-		.clk	= &timer6_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER6_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer6_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer7_fck;
-
-static struct clk_hw_omap timer7_fck_hw = {
-	.hw	= {
-		.clk	= &timer7_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER7_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer7_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-DEFINE_CLK_FIXED_FACTOR(cpsw_125mhz_gclk,
-			"dpll_core_m5_ck",
-			&dpll_core_m5_ck,
-			0x0,
-			1, 2);
-
-static const struct clk_ops cpsw_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-};
-
-static const struct clksel cpsw_cpts_rft_clkmux_sel[] = {
-	{ .parent = &dpll_core_m5_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m4_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *cpsw_cpts_rft_ck_parents[] = {
-	"dpll_core_m5_ck", "dpll_core_m4_ck",
-};
-
-static struct clk cpsw_cpts_rft_clk;
-
-static struct clk_hw_omap cpsw_cpts_rft_clk_hw = {
-	.hw	= {
-		.clk	= &cpsw_cpts_rft_clk,
-	},
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.clksel		= cpsw_cpts_rft_clkmux_sel,
-	.clksel_reg	= AM33XX_CM_CPTS_RFT_CLKSEL,
-	.clksel_mask	= AM33XX_CLKSEL_0_0_MASK,
-};
-
-DEFINE_STRUCT_CLK(cpsw_cpts_rft_clk, cpsw_cpts_rft_ck_parents, cpsw_fck_ops);
-
-
-/* gpio */
-static const char *gpio0_ck_parents[] = {
-	"clk_rc32k_ck", "clk_32768_ck", "clkdiv32k_ick",
-};
-
-static const struct clksel gpio0_dbclk_mux_sel[] = {
-	{ .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
-	{ .parent = &clk_32768_ck, .rates = div_1_1_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const struct clk_ops gpio_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static struct clk gpio0_dbclk_mux_ck;
-
-static struct clk_hw_omap gpio0_dbclk_mux_ck_hw = {
-	.hw	= {
-		.clk	= &gpio0_dbclk_mux_ck,
-	},
-	.clkdm_name	= "l4_wkup_clkdm",
-	.clksel		= gpio0_dbclk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_GPIO0_DBCLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(gpio0_dbclk_mux_ck, gpio0_ck_parents, gpio_fck_ops);
-
-DEFINE_CLK_GATE(gpio0_dbclk, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, 0x0,
-		AM33XX_CM_WKUP_GPIO0_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio1_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO1_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio2_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO2_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio3_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO3_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT, 0x0, NULL);
-
-
-static const char *pruss_ck_parents[] = {
-	"l3_gclk", "dpll_disp_m2_ck",
-};
-
-static const struct clksel pruss_ocp_clk_mux_sel[] = {
-	{ .parent = &l3_gclk, .rates = div_1_0_rates },
-	{ .parent = &dpll_disp_m2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pruss_ocp_gclk;
-
-static struct clk_hw_omap pruss_ocp_gclk_hw = {
-	.hw	= {
-		.clk	= &pruss_ocp_gclk,
-	},
-	.clkdm_name	= "pruss_ocp_clkdm",
-	.clksel		= pruss_ocp_clk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_PRUSS_OCP_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_0_MASK,
-};
-
-DEFINE_STRUCT_CLK(pruss_ocp_gclk, pruss_ck_parents, gpio_fck_ops);
-
-static const char *lcd_ck_parents[] = {
-	"dpll_disp_m2_ck", "dpll_core_m5_ck", "dpll_per_m2_ck",
-};
-
-static const struct clksel lcd_clk_mux_sel[] = {
-	{ .parent = &dpll_disp_m2_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m5_ck, .rates = div_1_1_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk lcd_gclk;
-
-static struct clk_hw_omap lcd_gclk_hw = {
-	.hw	= {
-		.clk	= &lcd_gclk,
-	},
-	.clkdm_name	= "lcdc_clkdm",
-	.clksel		= lcd_clk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_LCDC_PIXEL_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK_FLAGS(lcd_gclk, lcd_ck_parents,
-			gpio_fck_ops, CLK_SET_RATE_PARENT);
-
-DEFINE_CLK_FIXED_FACTOR(mmc_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1, 2);
-
-static const char *gfx_ck_parents[] = {
-	"dpll_core_m4_ck", "dpll_per_m2_ck",
-};
-
-static const struct clksel gfx_clksel_sel[] = {
-	{ .parent = &dpll_core_m4_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk gfx_fclk_clksel_ck;
-
-static struct clk_hw_omap gfx_fclk_clksel_ck_hw = {
-	.hw	= {
-		.clk	= &gfx_fclk_clksel_ck,
-	},
-	.clksel		= gfx_clksel_sel,
-	.clksel_reg	= AM33XX_CLKSEL_GFX_FCLK,
-	.clksel_mask	= AM33XX_CLKSEL_GFX_FCLK_MASK,
-};
-
-DEFINE_STRUCT_CLK(gfx_fclk_clksel_ck, gfx_ck_parents, gpio_fck_ops);
-
-static const struct clk_div_table div_1_0_2_1_rates[] = {
-	{ .div = 1, .val = 0, },
-	{ .div = 2, .val = 1, },
-	{ .div = 0 },
-};
-
-DEFINE_CLK_DIVIDER_TABLE(gfx_fck_div_ck, "gfx_fclk_clksel_ck",
-			 &gfx_fclk_clksel_ck, 0x0, AM33XX_CLKSEL_GFX_FCLK,
-			 AM33XX_CLKSEL_0_0_SHIFT, AM33XX_CLKSEL_0_0_WIDTH,
-			 0x0, div_1_0_2_1_rates, NULL);
-
-static const char *sysclkout_ck_parents[] = {
-	"clk_32768_ck", "l3_gclk", "dpll_ddr_m2_ck", "dpll_per_m2_ck",
-	"lcd_gclk",
-};
-
-static const struct clksel sysclkout_pre_sel[] = {
-	{ .parent = &clk_32768_ck, .rates = div_1_0_rates },
-	{ .parent = &l3_gclk, .rates = div_1_1_rates },
-	{ .parent = &dpll_ddr_m2_ck, .rates = div_1_2_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_3_rates },
-	{ .parent = &lcd_gclk, .rates = div_1_4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sysclkout_pre_ck;
-
-static struct clk_hw_omap sysclkout_pre_ck_hw = {
-	.hw	= {
-		.clk	= &sysclkout_pre_ck,
-	},
-	.clksel		= sysclkout_pre_sel,
-	.clksel_reg	= AM33XX_CM_CLKOUT_CTRL,
-	.clksel_mask	= AM33XX_CLKOUT2SOURCE_MASK,
-};
-
-DEFINE_STRUCT_CLK(sysclkout_pre_ck, sysclkout_ck_parents, gpio_fck_ops);
-
-/* Divide by 8 clock rates with default clock is 1/1*/
-static const struct clk_div_table div8_rates[] = {
-	{ .div = 1, .val = 0, },
-	{ .div = 2, .val = 1, },
-	{ .div = 3, .val = 2, },
-	{ .div = 4, .val = 3, },
-	{ .div = 5, .val = 4, },
-	{ .div = 6, .val = 5, },
-	{ .div = 7, .val = 6, },
-	{ .div = 8, .val = 7, },
-	{ .div = 0 },
-};
-
-DEFINE_CLK_DIVIDER_TABLE(clkout2_div_ck, "sysclkout_pre_ck", &sysclkout_pre_ck,
-			 0x0, AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2DIV_SHIFT,
-			 AM33XX_CLKOUT2DIV_WIDTH, 0x0, div8_rates, NULL);
-
-DEFINE_CLK_GATE(clkout2_ck, "clkout2_div_ck", &clkout2_div_ck, 0x0,
-		AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2EN_SHIFT, 0x0, NULL);
-
-static const char *wdt_ck_parents[] = {
-	"clk_rc32k_ck", "clkdiv32k_ick",
-};
-
-static const struct clksel wdt_clkmux_sel[] = {
-	{ .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk wdt1_fck;
-
-static struct clk_hw_omap wdt1_fck_hw = {
-	.hw	= {
-		.clk	= &wdt1_fck,
-	},
-	.clkdm_name	= "l4_wkup_clkdm",
-	.clksel		= wdt_clkmux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_WDT1_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(wdt1_fck, wdt_ck_parents, gpio_fck_ops);
-
-static const char *pwmss_clk_parents[] = {
-	"dpll_per_m2_ck",
-};
-
-static const struct clk_ops ehrpwm_tbclk_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm0_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS0_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm1_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS1_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm2_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS2_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-/*
- * debugss optional clocks
- */
-DEFINE_CLK_GATE(dbg_sysclk_ck, "sys_clkin_ck", &sys_clkin_ck,
-		0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(dbg_clka_ck, "dpll_core_m4_ck", &dpll_core_m4_ck,
-		0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		AM33XX_OPTCLK_DEBUG_CLKA_SHIFT, 0x0, NULL);
-
-static const char *stm_pmd_clock_mux_ck_parents[] = {
-	"dbg_sysclk_ck", "dbg_clka_ck",
-};
-
-DEFINE_CLK_MUX(stm_pmd_clock_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
-	       AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_STM_PMD_CLKSEL_SHIFT,
-	       AM33XX_STM_PMD_CLKSEL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_MUX(trace_pmd_clk_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
-	       AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-	       AM33XX_TRC_PMD_CLKSEL_SHIFT,
-	       AM33XX_TRC_PMD_CLKSEL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(stm_clk_div_ck, "stm_pmd_clock_mux_ck",
-		   &stm_pmd_clock_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		   AM33XX_STM_PMD_CLKDIVSEL_SHIFT,
-		   AM33XX_STM_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-DEFINE_CLK_DIVIDER(trace_clk_div_ck, "trace_pmd_clk_mux_ck",
-		   &trace_pmd_clk_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		   AM33XX_TRC_PMD_CLKDIVSEL_SHIFT,
-		   AM33XX_TRC_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-/*
- * clkdev
- */
-static struct omap_clk am33xx_clks[] = {
-	CLK(NULL,	"clk_32768_ck",		&clk_32768_ck),
-	CLK(NULL,	"clk_rc32k_ck",		&clk_rc32k_ck),
-	CLK(NULL,	"virt_19200000_ck",	&virt_19200000_ck),
-	CLK(NULL,	"virt_24000000_ck",	&virt_24000000_ck),
-	CLK(NULL,	"virt_25000000_ck",	&virt_25000000_ck),
-	CLK(NULL,	"virt_26000000_ck",	&virt_26000000_ck),
-	CLK(NULL,	"sys_clkin_ck",		&sys_clkin_ck),
-	CLK(NULL,	"tclkin_ck",		&tclkin_ck),
-	CLK(NULL,	"dpll_core_ck",		&dpll_core_ck),
-	CLK(NULL,	"dpll_core_x2_ck",	&dpll_core_x2_ck),
-	CLK(NULL,	"dpll_core_m4_ck",	&dpll_core_m4_ck),
-	CLK(NULL,	"dpll_core_m5_ck",	&dpll_core_m5_ck),
-	CLK(NULL,	"dpll_core_m6_ck",	&dpll_core_m6_ck),
-	CLK(NULL,	"dpll_mpu_ck",		&dpll_mpu_ck),
-	CLK("cpu0",	NULL,			&dpll_mpu_ck),
-	CLK(NULL,	"dpll_mpu_m2_ck",	&dpll_mpu_m2_ck),
-	CLK(NULL,	"dpll_ddr_ck",		&dpll_ddr_ck),
-	CLK(NULL,	"dpll_ddr_m2_ck",	&dpll_ddr_m2_ck),
-	CLK(NULL,	"dpll_ddr_m2_div2_ck",	&dpll_ddr_m2_div2_ck),
-	CLK(NULL,	"dpll_disp_ck",		&dpll_disp_ck),
-	CLK(NULL,	"dpll_disp_m2_ck",	&dpll_disp_m2_ck),
-	CLK(NULL,	"dpll_per_ck",		&dpll_per_ck),
-	CLK(NULL,	"dpll_per_m2_ck",	&dpll_per_m2_ck),
-	CLK(NULL,	"dpll_per_m2_div4_wkupdm_ck",	&dpll_per_m2_div4_wkupdm_ck),
-	CLK(NULL,	"dpll_per_m2_div4_ck",	&dpll_per_m2_div4_ck),
-	CLK(NULL,	"adc_tsc_fck",		&adc_tsc_fck),
-	CLK(NULL,	"cefuse_fck",		&cefuse_fck),
-	CLK(NULL,	"clkdiv32k_ck",		&clkdiv32k_ck),
-	CLK(NULL,	"clkdiv32k_ick",	&clkdiv32k_ick),
-	CLK(NULL,	"dcan0_fck",		&dcan0_fck),
-	CLK("481cc000.d_can",	NULL,		&dcan0_fck),
-	CLK(NULL,	"dcan1_fck",		&dcan1_fck),
-	CLK("481d0000.d_can",	NULL,		&dcan1_fck),
-	CLK(NULL,	"pruss_ocp_gclk",	&pruss_ocp_gclk),
-	CLK(NULL,	"mcasp0_fck",		&mcasp0_fck),
-	CLK(NULL,	"mcasp1_fck",		&mcasp1_fck),
-	CLK(NULL,	"mmu_fck",		&mmu_fck),
-	CLK(NULL,	"smartreflex0_fck",	&smartreflex0_fck),
-	CLK(NULL,	"smartreflex1_fck",	&smartreflex1_fck),
-	CLK(NULL,	"sha0_fck",		&sha0_fck),
-	CLK(NULL,	"aes0_fck",		&aes0_fck),
-	CLK(NULL,	"rng_fck",		&rng_fck),
-	CLK(NULL,	"timer1_fck",		&timer1_fck),
-	CLK(NULL,	"timer2_fck",		&timer2_fck),
-	CLK(NULL,	"timer3_fck",		&timer3_fck),
-	CLK(NULL,	"timer4_fck",		&timer4_fck),
-	CLK(NULL,	"timer5_fck",		&timer5_fck),
-	CLK(NULL,	"timer6_fck",		&timer6_fck),
-	CLK(NULL,	"timer7_fck",		&timer7_fck),
-	CLK(NULL,	"usbotg_fck",		&usbotg_fck),
-	CLK(NULL,	"ieee5000_fck",		&ieee5000_fck),
-	CLK(NULL,	"wdt1_fck",		&wdt1_fck),
-	CLK(NULL,	"l4_rtc_gclk",		&l4_rtc_gclk),
-	CLK(NULL,	"l3_gclk",		&l3_gclk),
-	CLK(NULL,	"dpll_core_m4_div2_ck",	&dpll_core_m4_div2_ck),
-	CLK(NULL,	"l4hs_gclk",		&l4hs_gclk),
-	CLK(NULL,	"l3s_gclk",		&l3s_gclk),
-	CLK(NULL,	"l4fw_gclk",		&l4fw_gclk),
-	CLK(NULL,	"l4ls_gclk",		&l4ls_gclk),
-	CLK(NULL,	"clk_24mhz",		&clk_24mhz),
-	CLK(NULL,	"sysclk_div_ck",	&sysclk_div_ck),
-	CLK(NULL,	"cpsw_125mhz_gclk",	&cpsw_125mhz_gclk),
-	CLK(NULL,	"cpsw_cpts_rft_clk",	&cpsw_cpts_rft_clk),
-	CLK(NULL,	"gpio0_dbclk_mux_ck",	&gpio0_dbclk_mux_ck),
-	CLK(NULL,	"gpio0_dbclk",		&gpio0_dbclk),
-	CLK(NULL,	"gpio1_dbclk",		&gpio1_dbclk),
-	CLK(NULL,	"gpio2_dbclk",		&gpio2_dbclk),
-	CLK(NULL,	"gpio3_dbclk",		&gpio3_dbclk),
-	CLK(NULL,	"lcd_gclk",		&lcd_gclk),
-	CLK(NULL,	"mmc_clk",		&mmc_clk),
-	CLK(NULL,	"gfx_fclk_clksel_ck",	&gfx_fclk_clksel_ck),
-	CLK(NULL,	"gfx_fck_div_ck",	&gfx_fck_div_ck),
-	CLK(NULL,	"sysclkout_pre_ck",	&sysclkout_pre_ck),
-	CLK(NULL,	"clkout2_div_ck",	&clkout2_div_ck),
-	CLK(NULL,	"timer_32k_ck",		&clkdiv32k_ick),
-	CLK(NULL,	"timer_sys_ck",		&sys_clkin_ck),
-	CLK(NULL,	"dbg_sysclk_ck",	&dbg_sysclk_ck),
-	CLK(NULL,	"dbg_clka_ck",		&dbg_clka_ck),
-	CLK(NULL,	"stm_pmd_clock_mux_ck",	&stm_pmd_clock_mux_ck),
-	CLK(NULL,	"trace_pmd_clk_mux_ck",	&trace_pmd_clk_mux_ck),
-	CLK(NULL,	"stm_clk_div_ck",	&stm_clk_div_ck),
-	CLK(NULL,	"trace_clk_div_ck",	&trace_clk_div_ck),
-	CLK(NULL,	"clkout2_ck",		&clkout2_ck),
-	CLK("48300200.ehrpwm",	"tbclk",	&ehrpwm0_tbclk),
-	CLK("48302200.ehrpwm",	"tbclk",	&ehrpwm1_tbclk),
-	CLK("48304200.ehrpwm",	"tbclk",	&ehrpwm2_tbclk),
-};
-
-
-static const char *enable_init_clks[] = {
-	"dpll_ddr_m2_ck",
-	"dpll_mpu_m2_ck",
-	"l3_gclk",
-	"l4hs_gclk",
-	"l4fw_gclk",
-	"l4ls_gclk",
-	"clkout2_ck",	/* Required for external peripherals like, Audio codecs */
-};
-
-int __init am33xx_clk_init(void)
-{
-	if (soc_is_am33xx())
-		cpu_mask = RATE_IN_AM33XX;
-
-	omap_clocks_register(am33xx_clks, ARRAY_SIZE(am33xx_clks));
-
-	omap2_clk_disable_autoidle_all();
-
-	omap2_clk_enable_init_clocks(enable_init_clks,
-				     ARRAY_SIZE(enable_init_clks));
-
-	/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always
-	 *    physically present, in such a case HWMOD enabling of
-	 *    clock would be failure with default parent. And timer
-	 *    probe thinks clock is already enabled, this leads to
-	 *    crash upon accessing timer 3 & 6 registers in probe.
-	 *    Fix by setting parent of both these timers to master
-	 *    oscillator clock.
-	 */
-
-	clk_set_parent(&timer3_fck, &sys_clkin_ck);
-	clk_set_parent(&timer6_fck, &sys_clkin_ck);
-	/*
-	 * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
-	 * the design/spec, so as a result, for example, timer which supposed
-	 * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
-	 * not expected by any use-case, so change WDT1 clock source to PRCM
-	 * 32KHz clock.
-	 */
-	clk_set_parent(&wdt1_fck, &clkdiv32k_ick);
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 36817d1..8aa34ee 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -581,7 +581,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_soc_init = am33xx_clk_init;
+	omap_clk_soc_init = am33xx_dt_clk_init;
 }
 
 void __init am33xx_init_late(void)
-- 
1.7.9.5

[PATCHv11 49/49] ARM: OMAP3: use DT clock init if DT data is available

[Tero Kristo]

OMAP3 platforms support both DT and non-DT boot at the moment, make
the clock init work according to the used setup.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/io.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 8aa34ee..f76355c 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -488,21 +488,29 @@ void __init omap3_init_early(void)
 void __init omap3430_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = omap3430_dt_clk_init;
 }
 
 void __init omap35xx_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = omap3430_dt_clk_init;
 }
 
 void __init omap3630_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = omap3630_dt_clk_init;
 }
 
 void __init am35xx_init_early(void)
 {
 	omap3_init_early();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = am35xx_dt_clk_init;
 }
 
 void __init ti81xx_init_early(void)
@@ -520,7 +528,10 @@ void __init ti81xx_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_soc_init = omap3xxx_clk_init;
+	if (of_have_populated_dt())
+		omap_clk_soc_init = ti81xx_dt_clk_init;
+	else
+		omap_clk_soc_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
-- 
1.7.9.5

Re: [PATCHv11 00/49] ARM: TI SoC clock DT conversion

[Nishanth Menon]

On 12/19/2013 05:23 AM, Tero Kristo wrote:
[...]
>
> branch: 3.13-rc4-dt-clks-v11 : contains everything, shall me merged last


Tero,
Considering Pauls'  concerns with v10 last time, I ran
[1] and got a few sparse, smatch and checkpatch warnings:
http://pastebin.mozilla.org/3810314

I think we can ignore sparse spam about "__ksymtab" for the moment.
but stuff like:
+drivers/clk/ti/clk.c:88 ti_clk_retry_init() error: potential null 
dereference 'retry'.  (kzalloc returns null)

the checkpatch warn that Paul stated:"extern struct of_device_id 
__clk_of_table" still remain should be fixed IMHO.

I am unfortunately on vacation right now, and will not be able to test 
until second week of jan on platforms - thanks to my completely messed 
up vpn setup.

[1] https://github.com/nmenon/kernel_patch_verify

Regards,
Nishanth Menon

Re: [PATCHv11 00/49] ARM: TI SoC clock DT conversion

[Tony Lindgren]

* Nishanth Menon <nm@ti.com> [131219 07:08]:
> On 12/19/2013 05:23 AM, Tero Kristo wrote:
> [...]
> >
> >branch: 3.13-rc4-dt-clks-v11 : contains everything, shall me merged last
> 
> 
> Tero,
> Considering Pauls'  concerns with v10 last time, I ran
> [1] and got a few sparse, smatch and checkpatch warnings:
> http://pastebin.mozilla.org/3810314
> 
> I think we can ignore sparse spam about "__ksymtab" for the moment.
> but stuff like:
> +drivers/clk/ti/clk.c:88 ti_clk_retry_init() error: potential null
> dereference 'retry'.  (kzalloc returns null)
> 
> the checkpatch warn that Paul stated:"extern struct of_device_id
> __clk_of_table" still remain should be fixed IMHO.

Yeah let's not introduce new warnings. Also noticed an issue
with "clk: divider: add support for low level ops" on at least
n8x0 and 2430sdp.

Regards,

Tony
 
> [1] https://github.com/nmenon/kernel_patch_verify

Re: [PATCHv11 00/49] ARM: TI SoC clock DT conversion

[Keerthy]

Hi Tero,

On Thursday 19 December 2013 04:53 PM, Tero Kristo wrote:
> Hi,
>
> So, once again new series. I guess I should have addressed all comments
> for v10 except the extern sharing of __clk_of_table. Based on discussion
> with Mike, this should be fine to fix later.
>
> Main changes compared to v10:
> - rebased on top of 3.13-rc4
> - applied clk_desc support from Mike, did some cleanups and additions to that
>    * needed for below item, clk_ll_ops
> - added support for clk_ll_ops, and removed SoC wide clock ops
>    * used for wrapping the IP block specific register access routines now
> - removed need for separate init function types because of above two points,
>    TI clocks also use the standard prototype now, no return value needed
> - cleaned up the init retry logic for TI clocks a bit (DPLL/APLL)
> - added clocks {} and clockdomains {} nodes under the master clock IP nodes,
>    which are used to group clocks and domains accordingly
> - changed compatible strings for clock master IPs from ti,clock-master to
>    something of form ti,omap4-prm etc.
>
> omap3 legacy clock data is not removed with this series, this can be done
> later (basically I want someone to test all the possible omap3 boards out
> there with DT boot before attempting this.)
>
> Testing done:
> - omap3-beagle: boot, suspend-resume (ret), suspend-resume (off)
> - omap4-panda-es: boot, suspend-resume (ret)
> - omap5-uevm: boot
> - dra7-evm: boot
> - am335x-bone: boot

I boot tested the branch '3.13-rc4-dt-clks-v11' on am43x-epos-evm
and it boots fine after enabling am43x system type.

> Branches again available here:
> https://github.com/t-kristo/linux-pm.git
>
> branch: 3.13-rc4-dt-clks-v11 : contains everything, shall me merged last
> branch: 3.13-rc4-dt-clks-v11-for-mike : drivers/clk changes
> branch: 3.13-rc4-dt-clks-v11-for-benoit : DT data only
>
> -Tero
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Regards,
Keerthy