devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laxman Dewangan <ldewangan@nvidia.com>
To: anton@enomsg.org, dwmw2@infradead.org
Cc: mark.rutland@arm.com, rob@landley.net,
	ijc+devicetree@hellion.org.uk, swarren@nvidia.com,
	lee.jones@linaro.org, devicetree@vger.kernel.org,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Laxman Dewangan <ldewangan@nvidia.com>
Subject: [PATCH 2/2] power: reset: as3722: add power-off driver
Date: Thu, 19 Dec 2013 18:27:01 +0530	[thread overview]
Message-ID: <1387457821-12509-2-git-send-email-ldewangan@nvidia.com> (raw)
In-Reply-To: <1387457821-12509-1-git-send-email-ldewangan@nvidia.com>

ams AS3722 supports the power off functionality to turn off
system.

Add power off driver for ams AS3722.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 drivers/power/reset/Kconfig           |    6 +++
 drivers/power/reset/Makefile          |    1 +
 drivers/power/reset/as3722-poweroff.c |   96 +++++++++++++++++++++++++++++++++
 3 files changed, 103 insertions(+)
 create mode 100644 drivers/power/reset/as3722-poweroff.c

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 9b3ea53..6d452a7 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -6,6 +6,12 @@ menuconfig POWER_RESET
 
 	  Say Y here to enable board reset and power off
 
+config POWER_RESET_AS3722
+	bool "ams AS3722 power-off driver"
+	depends on MFD_AS3722 && POWER_RESET
+	help
+	  This driver supports turning off board via a ams AS3722 power-off.
+
 config POWER_RESET_GPIO
 	bool "GPIO power-off driver"
 	depends on OF_GPIO && POWER_RESET
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 3e6ed88..a5b4a77 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
 obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
diff --git a/drivers/power/reset/as3722-poweroff.c b/drivers/power/reset/as3722-poweroff.c
new file mode 100644
index 0000000..6849711
--- /dev/null
+++ b/drivers/power/reset/as3722-poweroff.c
@@ -0,0 +1,96 @@
+/*
+ * Power off driver for ams AS3722 device.
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/mfd/as3722.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct as3722_poweroff {
+	struct device *dev;
+	struct as3722 *as3722;
+};
+
+static struct as3722_poweroff *as3722_pm_poweroff;
+
+static void as3722_pm_power_off(void)
+{
+	int ret;
+
+	if (!as3722_pm_poweroff) {
+		pr_err("AS3722 poweroff is not initialised\n");
+		return;
+	}
+
+	ret = as3722_update_bits(as3722_pm_poweroff->as3722,
+		AS3722_RESET_CONTROL_REG, AS3722_POWER_OFF, AS3722_POWER_OFF);
+	if (ret < 0)
+		dev_err(as3722_pm_poweroff->dev,
+			"RESET_CONTROL_REG update failed, %d\n", ret);
+}
+
+static int as3722_poweroff_probe(struct platform_device *pdev)
+{
+	struct as3722_poweroff *as3722_poweroff;
+	struct device_node *np = pdev->dev.parent->of_node;
+
+	if (!np)
+		return -EINVAL;
+
+	if (!of_property_read_bool(np, "ams,system-power-controller"))
+		return 0;
+
+	as3722_poweroff = devm_kzalloc(&pdev->dev, sizeof(*as3722_poweroff),
+				GFP_KERNEL);
+	if (!as3722_poweroff)
+		return -ENOMEM;
+
+	as3722_poweroff->as3722 = dev_get_drvdata(pdev->dev.parent);
+	as3722_poweroff->dev = &pdev->dev;
+	as3722_pm_poweroff = as3722_poweroff;
+	if (!pm_power_off)
+		pm_power_off = as3722_pm_power_off;
+
+	return 0;
+}
+
+static int as3722_poweroff_remove(struct platform_device *pdev)
+{
+	if (pm_power_off == as3722_pm_power_off)
+		pm_power_off = NULL;
+	as3722_pm_poweroff = NULL;
+
+	return 0;
+}
+
+static struct platform_driver as3722_poweroff_driver = {
+	.driver = {
+		.name = "as3722-power-off",
+		.owner = THIS_MODULE,
+	},
+	.probe = as3722_poweroff_probe,
+	.remove = as3722_poweroff_remove,
+};
+
+module_platform_driver(as3722_poweroff_driver);
+
+MODULE_DESCRIPTION("Power off driver for ams AS3722 PMIC Device");
+MODULE_ALIAS("platform:as3722-power-off");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5


  reply	other threads:[~2013-12-19 12:57 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-19 12:57 [PATCH 1/2] mfd: AS3722: add dt node properties for system power controller Laxman Dewangan
2013-12-19 12:57 ` Laxman Dewangan [this message]
2013-12-19 13:06 ` Lee Jones
2013-12-19 19:03   ` Stephen Warren
2013-12-20 13:47     ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1387457821-12509-2-git-send-email-ldewangan@nvidia.com \
    --to=ldewangan@nvidia.com \
    --cc=anton@enomsg.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lee.jones@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rob@landley.net \
    --cc=swarren@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).