[PATCH v8 0/9] USB Device Controller support for BCM281xx

[PATCH v8 0/9] USB Device Controller support for BCM281xx

[Matt Porter]

Changes since v7:
	- Register phy provider with generic phy subsystem only after
	  the generic phy has been allocated and configured.

Changes since v6:
	- Drop dependency on the Exynos generic phy conversion series
	- Bring back original patch that converts s3c-hsotg to use the
	  generic phy layer with a fall back to the old usb style phy
	  support.

Changes since v5:
	- tweak s3c-hsotg Kconfig help message to be more generic

Changes since v4:
	- phy_set/get_bus_width now use an int for bus_width

Changes since v3:
	- Rebased on 3.13-rc3
	- Move struct phy bus_width attribute back into struct phy_attrs
	- Fix build issue on !GENERIC_PHY
	- Update dwc2 binding to reflect optional phy properties
	- Rename bcm-kona-phy.txt binding to bcm-phy.txt
	- Reorder bcm kona phy includes and use bitops
	- phy-names changed to "usb2-phy" to match updated s3c-hsotg
	  generic phy-ification series

Changes since v2:
	- Rebased on 3.13-rc1
	- Fix braces in phy_get_bus_width()/phy_set_bus_width()
	- Drop generic phy conversion to use the same support from
	  the Exynos generic phy conversion series
	- Modify dts support to match the "device" phy name required
	  in the v3 Exynos generic phy conversion
	- Add s3c-hsotg phy_init/phy_exit support
	- Fix typo on reg property in kona phy binding
	- Replace phy driver reg struct with offset defines
	- Move phy soft reset to phy driver init
	- Fix dts node names to match ePAPR conventions

Changes since v1:
	- Convert USB phy driver to generic phy subsystem
	- Add phy bus width apis
	- Drop dwc2 phy bus width DT property in favor of querying the
	  phy provider for bus width
	- Add generic phy/clock properties to dwc2 DT binding
	- Add generic phy subsystem support to s3c-hsotg with the
	  existing usb phy and pdata phy methods as a fallback
	- Split bindings out to separate patches to match the latest
	  DT binding review guidelines

This series adds USB Device Controller support for the Broadcom
BCM281xx family of parts. BCM281xx contains a DWC2 OTG block and
s3c-hsotg is used to support UDC operation.

Part 1 adds phy bus width support to the generic phy subsystem

Parts 2-6 allows s3c-hsotg to build on non-Samsung platforms, supports
the dwc2 binding, adds generic phy layer support, and supports fetching
phy bus width using the generic phy layer.

Parts 7-8 add a generic phy binding and driver for the BCM Kona USB PHY.

Part 9 adds the DT nodes to enable UDC support on both BCM281xx boards
in the kernel.

This series depends on:
	- "Update Kona drivers to use clocks" v4 series
	  https://lkml.org/lkml/2013/12/5/508
	  (relevant portion now queued for 3.14)



Matt Porter (9):
  phy: add phy_get_bus_width()/phy_set_bus_width() calls
  staging: dwc2: update DT binding to add generic clock/phy properties
  usb: gadget: s3c-hsotg: enable build for other platforms
  usb: gadget: s3c-hsotg: add snps,dwc2 compatible string
  usb: gadget: s3c-hsotg: enable generic phy support
  usb: gadget: s3c-hsotg: get phy bus width from phy subsystem
  phy: add Broadcom Kona USB2 PHY DT binding
  phy: add Broadcom Kona USB2 PHY driver
  ARM: dts: add usb udc support to bcm281xx

 Documentation/devicetree/bindings/phy/bcm-phy.txt  |  15 ++
 Documentation/devicetree/bindings/staging/dwc2.txt |  12 ++
 arch/arm/boot/dts/bcm11351-brt.dts                 |   6 +
 arch/arm/boot/dts/bcm11351.dtsi                    |  18 +++
 arch/arm/boot/dts/bcm28155-ap.dts                  |   8 ++
 drivers/phy/Kconfig                                |   6 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-bcm-kona-usb2.c                    | 158 +++++++++++++++++++++
 drivers/usb/gadget/Kconfig                         |   7 +-
 drivers/usb/gadget/s3c-hsotg.c                     |  72 +++++++---
 drivers/usb/gadget/s3c-hsotg.h                     |   1 +
 include/linux/phy/phy.h                            |  28 ++++
 12 files changed, 309 insertions(+), 23 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/bcm-phy.txt
 create mode 100644 drivers/phy/phy-bcm-kona-usb2.c

-- 
1.8.4

[PATCH v8 2/9] staging: dwc2: update DT binding to add generic clock/phy properties

[Matt Porter]

dwc2/s3c-hsotg require a single clock to be specified and optionally
a generic phy. On the s3c-hsotg driver old style USB phy support is
present as a fallback so the generic phy properties are optional.

Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/staging/dwc2.txt | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt
index 1a1b7cf..a1753ed 100644
--- a/Documentation/devicetree/bindings/staging/dwc2.txt
+++ b/Documentation/devicetree/bindings/staging/dwc2.txt
@@ -5,6 +5,14 @@ Required properties:
 - compatible : "snps,dwc2"
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
+- clocks: clock provider specifier
+- clock-names: shall be "otg"
+Refer to clk/clock-bindings.txt for generic clock consumer properties
+
+Optional properties:
+- phys: phy provider specifier
+- phy-names: shall be "device"
+Refer to phy/phy-bindings.txt for generic phy consumer properties
 
 Example:
 
@@ -12,4 +20,8 @@ Example:
                 compatible = "ralink,rt3050-usb, snps,dwc2";
                 reg = <0x101c0000 40000>;
                 interrupts = <18>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
         };
-- 
1.8.4

[PATCH v8 3/9] usb: gadget: s3c-hsotg: enable build for other platforms

[Matt Porter]

Remove unused Samsung-specific machine include and Kconfig
dependency on S3C.

Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
---
 drivers/usb/gadget/Kconfig     | 7 +++----
 drivers/usb/gadget/s3c-hsotg.c | 2 --
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index a91e642..181e760 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -294,11 +294,10 @@ config USB_PXA27X
 	   gadget drivers to also be dynamically linked.
 
 config USB_S3C_HSOTG
-	tristate "S3C HS/OtG USB Device controller"
-	depends on S3C_DEV_USB_HSOTG
+	tristate "Designware/S3C HS/OtG USB Device controller"
 	help
-	  The Samsung S3C64XX USB2.0 high-speed gadget controller
-	  integrated into the S3C64XX series SoC.
+	  The Designware USB2.0 high-speed gadget controller
+	  integrated into many SoCs.
 
 config USB_S3C2410
 	tristate "S3C2410 USB Device Controller"
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 9875d9c..db797f2 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -36,8 +36,6 @@
 #include <linux/usb/phy.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
-#include <mach/map.h>
-
 #include "s3c-hsotg.h"
 
 static const char * const s3c_hsotg_supply_names[] = {
-- 
1.8.4

Re: [PATCH v8 3/9] usb: gadget: s3c-hsotg: enable build for other platforms

[Felipe Balbi]

[-- Attachment #1.1: Type: text/plain, Size: 983 bytes --]

On Thu, Dec 19, 2013 at 09:23:04AM -0500, Matt Porter wrote:
> Remove unused Samsung-specific machine include and Kconfig
> dependency on S3C.
> 
> Signed-off-by: Matt Porter <mporter@linaro.org>
> Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
> Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
> ---
>  drivers/usb/gadget/Kconfig     | 7 +++----
>  drivers/usb/gadget/s3c-hsotg.c | 2 --
>  2 files changed, 3 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> index a91e642..181e760 100644
> --- a/drivers/usb/gadget/Kconfig
> +++ b/drivers/usb/gadget/Kconfig
> @@ -294,11 +294,10 @@ config USB_PXA27X
>  	   gadget drivers to also be dynamically linked.
>  
>  config USB_S3C_HSOTG
> -	tristate "S3C HS/OtG USB Device controller"
> -	depends on S3C_DEV_USB_HSOTG
> +	tristate "Designware/S3C HS/OtG USB Device controller"

causes build failure in x86. Sorry dropping from my queue.

-- 
balbi

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v8 3/9] usb: gadget: s3c-hsotg: enable build for other platforms

[Tomasz Figa]

On Monday 23 of December 2013 10:25:57 Felipe Balbi wrote:
> On Thu, Dec 19, 2013 at 09:23:04AM -0500, Matt Porter wrote:
> > Remove unused Samsung-specific machine include and Kconfig
> > dependency on S3C.
> > 
> > Signed-off-by: Matt Porter <mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > Reviewed-by: Markus Mayer <markus.mayer-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > Reviewed-by: Tim Kryger <tim.kryger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > ---
> >  drivers/usb/gadget/Kconfig     | 7 +++----
> >  drivers/usb/gadget/s3c-hsotg.c | 2 --
> >  2 files changed, 3 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> > index a91e642..181e760 100644
> > --- a/drivers/usb/gadget/Kconfig
> > +++ b/drivers/usb/gadget/Kconfig
> > @@ -294,11 +294,10 @@ config USB_PXA27X
> >  	   gadget drivers to also be dynamically linked.
> >  
> >  config USB_S3C_HSOTG
> > -	tristate "S3C HS/OtG USB Device controller"
> > -	depends on S3C_DEV_USB_HSOTG
> > +	tristate "Designware/S3C HS/OtG USB Device controller"
> 
> causes build failure in x86. Sorry dropping from my queue.

Maybe depends on ARM would be a good enough stepping stone?

Best regards,
Tomasz

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v8 3/9] usb: gadget: s3c-hsotg: enable build for other platforms

[Matt Porter]

On Mon, Dec 23, 2013 at 05:30:41PM +0100, Tomasz Figa wrote:
> On Monday 23 of December 2013 10:25:57 Felipe Balbi wrote:
> > On Thu, Dec 19, 2013 at 09:23:04AM -0500, Matt Porter wrote:
> > > Remove unused Samsung-specific machine include and Kconfig
> > > dependency on S3C.
> > > 
> > > Signed-off-by: Matt Porter <mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > > Reviewed-by: Markus Mayer <markus.mayer-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > > Reviewed-by: Tim Kryger <tim.kryger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > > ---
> > >  drivers/usb/gadget/Kconfig     | 7 +++----
> > >  drivers/usb/gadget/s3c-hsotg.c | 2 --
> > >  2 files changed, 3 insertions(+), 6 deletions(-)
> > > 
> > > diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> > > index a91e642..181e760 100644
> > > --- a/drivers/usb/gadget/Kconfig
> > > +++ b/drivers/usb/gadget/Kconfig
> > > @@ -294,11 +294,10 @@ config USB_PXA27X
> > >  	   gadget drivers to also be dynamically linked.
> > >  
> > >  config USB_S3C_HSOTG
> > > -	tristate "S3C HS/OtG USB Device controller"
> > > -	depends on S3C_DEV_USB_HSOTG
> > > +	tristate "Designware/S3C HS/OtG USB Device controller"
> > 
> > causes build failure in x86. Sorry dropping from my queue.
> 
> Maybe depends on ARM would be a good enough stepping stone?

Yes, we could then move from readsl/writesl to ioread_read/io_write_rep
next time around as that fixes the portability issue.

Felipe, since depending on ARM is a trivial fix for this, can you take
an updated version at this point?

-Matt
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v8 4/9] usb: gadget: s3c-hsotg: add snps,dwc2 compatible string

[Matt Porter]

Enable support for the dwc2 binding.

Signed-off-by: Matt Porter <mporter@linaro.org>
---
 drivers/usb/gadget/s3c-hsotg.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index db797f2..cbfbf41 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -3726,6 +3726,7 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
 #ifdef CONFIG_OF
 static const struct of_device_id s3c_hsotg_of_ids[] = {
 	{ .compatible = "samsung,s3c6400-hsotg", },
+	{ .compatible = "snps,dwc2", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, s3c_hsotg_of_ids);
-- 
1.8.4

[PATCH v8 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls

[Matt Porter]

This adds a pair of APIs that allows the generic PHY subsystem to
provide information on the PHY bus width. The PHY provider driver may
use phy_set_bus_width() to set the bus width that the PHY supports.
The controller driver may then use phy_get_bus_width() to fetch the
PHY bus width in order to properly configure the controller.

Signed-off-by: Matt Porter <mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
 include/linux/phy/phy.h | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 6d72269..e273e5a 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -38,6 +38,14 @@ struct phy_ops {
 };
 
 /**
+ * struct phy_attrs - represents phy attributes
+ * @bus_width: Data path width implemented by PHY
+ */
+struct phy_attrs {
+	u32			bus_width;
+};
+
+/**
  * struct phy - represents the phy device
  * @dev: phy device
  * @id: id of the phy device
@@ -46,6 +54,7 @@ struct phy_ops {
  * @mutex: mutex to protect phy_ops
  * @init_count: used to protect when the PHY is used by multiple consumers
  * @power_count: used to protect when the PHY is used by multiple consumers
+ * @phy_attrs: used to specify PHY specific attributes
  */
 struct phy {
 	struct device		dev;
@@ -55,6 +64,7 @@ struct phy {
 	struct mutex		mutex;
 	int			init_count;
 	int			power_count;
+	struct phy_attrs	attrs;
 };
 
 /**
@@ -127,6 +137,14 @@ int phy_init(struct phy *phy);
 int phy_exit(struct phy *phy);
 int phy_power_on(struct phy *phy);
 int phy_power_off(struct phy *phy);
+static inline int phy_get_bus_width(struct phy *phy)
+{
+	return phy->attrs.bus_width;
+}
+static inline void phy_set_bus_width(struct phy *phy, int bus_width)
+{
+	phy->attrs.bus_width = bus_width;
+}
 struct phy *phy_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
 void phy_put(struct phy *phy);
@@ -199,6 +217,16 @@ static inline int phy_power_off(struct phy *phy)
 	return -ENOSYS;
 }
 
+static inline int phy_get_bus_width(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline void phy_set_bus_width(struct phy *phy, int bus_width)
+{
+	return;
+}
+
 static inline struct phy *phy_get(struct device *dev, const char *string)
 {
 	return ERR_PTR(-ENOSYS);
-- 
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v8 5/9] usb: gadget: s3c-hsotg: enable generic phy support

[Matt Porter]

Adds support for the generic PHY subsystem. Generic PHY
support is probed and then the driver falls back to checking
for an old style USB PHY and pdata if not found.

Signed-off-by: Matt Porter <mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/usb/gadget/s3c-hsotg.c | 55 ++++++++++++++++++++++++++++++------------
 1 file changed, 39 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index cbfbf41..8f9bcdb 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -30,6 +30,8 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/usb/phy.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -138,6 +140,7 @@ struct s3c_hsotg_ep {
  * @dev: The parent device supplied to the probe function
  * @driver: USB gadget driver
  * @phy: The otg phy transceiver structure for phy control.
+ * @uphy: The otg phy transceiver structure for old USB phy control.
  * @plat: The platform specific configuration data. This can be removed once
  * all SoCs support usb transceiver.
  * @regs: The memory area mapped for accessing registers.
@@ -159,7 +162,8 @@ struct s3c_hsotg_ep {
 struct s3c_hsotg {
 	struct device		 *dev;
 	struct usb_gadget_driver *driver;
-	struct usb_phy		*phy;
+	struct phy		 *phy;
+	struct usb_phy		 *uphy;
 	struct s3c_hsotg_plat	 *plat;
 
 	spinlock_t              lock;
@@ -2901,8 +2905,11 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
 
 	dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
 
-	if (hsotg->phy)
-		usb_phy_init(hsotg->phy);
+	if (hsotg->phy) {
+		phy_init(hsotg->phy);
+		phy_power_on(hsotg->phy);
+	} else if (hsotg->uphy)
+		usb_phy_init(hsotg->uphy);
 	else if (hsotg->plat->phy_init)
 		hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
 }
@@ -2918,8 +2925,11 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
 {
 	struct platform_device *pdev = to_platform_device(hsotg->dev);
 
-	if (hsotg->phy)
-		usb_phy_shutdown(hsotg->phy);
+	if (hsotg->phy) {
+		phy_power_off(hsotg->phy);
+		phy_exit(hsotg->phy);
+	} else if (hsotg->uphy)
+		usb_phy_shutdown(hsotg->uphy);
 	else if (hsotg->plat->phy_exit)
 		hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
 }
@@ -3526,7 +3536,8 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
 static int s3c_hsotg_probe(struct platform_device *pdev)
 {
 	struct s3c_hsotg_plat *plat = dev_get_platdata(&pdev->dev);
-	struct usb_phy *phy;
+	struct phy *phy;
+	struct usb_phy *uphy;
 	struct device *dev = &pdev->dev;
 	struct s3c_hsotg_ep *eps;
 	struct s3c_hsotg *hsotg;
@@ -3541,19 +3552,26 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	/*
+	 * Attempt to find a generic PHY, then look for an old style
+	 * USB PHY, finally fall back to pdata
+	 */
+	phy = devm_phy_get(&pdev->dev, "usb2-phy");
 	if (IS_ERR(phy)) {
-		/* Fallback for pdata */
-		plat = dev_get_platdata(&pdev->dev);
-		if (!plat) {
-			dev_err(&pdev->dev, "no platform data or transceiver defined\n");
-			return -EPROBE_DEFER;
-		} else {
+		uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+		if (IS_ERR(uphy)) {
+			/* Fallback for pdata */
+			plat = dev_get_platdata(&pdev->dev);
+			if (!plat) {
+				dev_err(&pdev->dev,
+				"no platform data or transceiver defined\n");
+				return -EPROBE_DEFER;
+			}
 			hsotg->plat = plat;
-		}
-	} else {
+		} else
+			hsotg->uphy = uphy;
+	} else
 		hsotg->phy = phy;
-	}
 
 	hsotg->dev = dev;
 
@@ -3620,6 +3638,9 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 		goto err_supplies;
 	}
 
+	if (hsotg->phy)
+		phy_init(hsotg->phy);
+
 	/* usb phy enable */
 	s3c_hsotg_phy_enable(hsotg);
 
@@ -3713,6 +3734,8 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
 	}
 
 	s3c_hsotg_phy_disable(hsotg);
+	if (hsotg->phy)
+		phy_exit(hsotg->phy);
 	clk_disable_unprepare(hsotg->clk);
 
 	return 0;
-- 
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v8 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem

[Matt Porter]

Adds support for querying the phy bus width from the generic phy
subsystem. Configure UTMI bus width in GUSBCFG based on this value.

Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/usb/gadget/s3c-hsotg.c | 14 +++++++++++++-
 drivers/usb/gadget/s3c-hsotg.h |  1 +
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 8f9bcdb..93ba8b6 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -146,6 +146,7 @@ struct s3c_hsotg_ep {
  * @regs: The memory area mapped for accessing registers.
  * @irq: The IRQ number we are using
  * @supplies: Definition of USB power supplies
+ * @phyif: PHY interface width
  * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
  * @num_of_eps: Number of available EPs (excluding EP0)
  * @debug_root: root directrory for debugfs.
@@ -174,6 +175,7 @@ struct s3c_hsotg {
 
 	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
 
+	u32			phyif;
 	unsigned int		dedicated_fifos:1;
 	unsigned char           num_of_eps;
 
@@ -2279,7 +2281,7 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
 	 */
 
 	/* set the PLL on, remove the HNP/SRP and set the PHY */
-	writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) |
+	writel(hsotg->phyif | GUSBCFG_TOutCal(7) |
 	       (0x5 << 10), hsotg->regs + GUSBCFG);
 
 	s3c_hsotg_init_fifo(hsotg);
@@ -3638,6 +3640,16 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 		goto err_supplies;
 	}
 
+	/* Set default UTMI width */
+	hsotg->phyif = GUSBCFG_PHYIf16;
+
+	/*
+	 * If using the generic PHY framework, check if the PHY bus
+	 * width is 8-bit and set the phyif appropriately.
+	 */
+	if (hsotg->phy && (phy_get_bus_width(phy) == 8))
+		hsotg->phyif = GUSBCFG_PHYIf8;
+
 	if (hsotg->phy)
 		phy_init(hsotg->phy);
 
diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h
index d650b12..85f549f 100644
--- a/drivers/usb/gadget/s3c-hsotg.h
+++ b/drivers/usb/gadget/s3c-hsotg.h
@@ -55,6 +55,7 @@
 #define GUSBCFG_HNPCap				(1 << 9)
 #define GUSBCFG_SRPCap				(1 << 8)
 #define GUSBCFG_PHYIf16			(1 << 3)
+#define GUSBCFG_PHYIf8				(0 << 3)
 #define GUSBCFG_TOutCal_MASK			(0x7 << 0)
 #define GUSBCFG_TOutCal_SHIFT			(0)
 #define GUSBCFG_TOutCal_LIMIT			(0x7)
-- 
1.8.4

[PATCH v8 7/9] phy: add Broadcom Kona USB2 PHY DT binding

[Matt Porter]

Add a binding that describes the Broadcom Kona USB2 PHY found
on the BCM281xx family of SoCs.

Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/phy/bcm-phy.txt | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/bcm-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/bcm-phy.txt b/Documentation/devicetree/bindings/phy/bcm-phy.txt
new file mode 100644
index 0000000..3dc8b3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-phy.txt
@@ -0,0 +1,15 @@
+BROADCOM KONA USB2 PHY
+
+Required properties:
+ - compatible: brcm,kona-usb2-phy
+ - reg: offset and length of the PHY registers
+ - #phy-cells: must be 0
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+	};
-- 
1.8.4

[PATCH v8 8/9] phy: add Broadcom Kona USB2 PHY driver

[Matt Porter]

Add a driver for the internal Broadcom Kona USB 2.0 PHY found
on the BCM281xx family of SoCs.

Signed-off-by: Matt Porter <mporter@linaro.org>
---
 drivers/phy/Kconfig             |   6 ++
 drivers/phy/Makefile            |   1 +
 drivers/phy/phy-bcm-kona-usb2.c | 158 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 165 insertions(+)
 create mode 100644 drivers/phy/phy-bcm-kona-usb2.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index a344f3d..2e87fa8 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -51,4 +51,10 @@ config PHY_EXYNOS_DP_VIDEO
 	help
 	  Support for Display Port PHY found on Samsung EXYNOS SoCs.
 
+config BCM_KONA_USB2_PHY
+	tristate "Broadcom Kona USB2 PHY Driver"
+	depends on GENERIC_PHY
+	help
+	  Enable this to support the Broadcom Kona USB 2.0 PHY.
+
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index d0caae9..c447f1a 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
+obj-$(CONFIG_BCM_KONA_USB2_PHY)		+= phy-bcm-kona-usb2.o
 obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
 obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
 obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/phy-bcm-kona-usb2.c
new file mode 100644
index 0000000..efc5c1a
--- /dev/null
+++ b/drivers/phy/phy-bcm-kona-usb2.c
@@ -0,0 +1,158 @@
+/*
+ * phy-bcm-kona-usb2.c - Broadcom Kona USB2 Phy Driver
+ *
+ * Copyright (C) 2013 Linaro Limited
+ * Matt Porter <mporter@linaro.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define OTGCTL			(0)
+#define OTGCTL_OTGSTAT2		BIT(31)
+#define OTGCTL_OTGSTAT1		BIT(30)
+#define OTGCTL_PRST_N_SW	BIT(11)
+#define OTGCTL_HRESET_N		BIT(10)
+#define OTGCTL_UTMI_LINE_STATE1	BIT(9)
+#define OTGCTL_UTMI_LINE_STATE0	BIT(8)
+
+#define P1CTL			(8)
+#define P1CTL_SOFT_RESET	BIT(1)
+#define P1CTL_NON_DRIVING	BIT(0)
+
+struct bcm_kona_usb {
+	void __iomem *regs;
+};
+
+static void bcm_kona_usb_phy_power(struct bcm_kona_usb *phy, int on)
+{
+	u32 val;
+
+	val = readl(phy->regs + OTGCTL);
+	if (on) {
+		/* Configure and power PHY */
+		val &= ~(OTGCTL_OTGSTAT2 | OTGCTL_OTGSTAT1 |
+			 OTGCTL_UTMI_LINE_STATE1 | OTGCTL_UTMI_LINE_STATE0);
+		val |= OTGCTL_PRST_N_SW | OTGCTL_HRESET_N;
+	} else {
+		val &= ~(OTGCTL_PRST_N_SW | OTGCTL_HRESET_N);
+	}
+	writel(val, phy->regs + OTGCTL);
+}
+
+static int bcm_kona_usb_phy_init(struct phy *gphy)
+{
+	struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
+	u32 val;
+
+	/* Soft reset PHY */
+	val = readl(phy->regs + P1CTL);
+	val &= ~P1CTL_NON_DRIVING;
+	val |= P1CTL_SOFT_RESET;
+	writel(val, phy->regs + P1CTL);
+	writel(val & ~P1CTL_SOFT_RESET, phy->regs + P1CTL);
+	/* Reset needs to be asserted for 2ms */
+	mdelay(2);
+	writel(val | P1CTL_SOFT_RESET, phy->regs + P1CTL);
+
+	return 0;
+}
+
+static int bcm_kona_usb_phy_power_on(struct phy *gphy)
+{
+	struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
+
+	bcm_kona_usb_phy_power(phy, 1);
+
+	return 0;
+}
+
+static int bcm_kona_usb_phy_power_off(struct phy *gphy)
+{
+	struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
+
+	bcm_kona_usb_phy_power(phy, 0);
+
+	return 0;
+}
+
+static struct phy_ops ops = {
+	.init		= bcm_kona_usb_phy_init,
+	.power_on	= bcm_kona_usb_phy_power_on,
+	.power_off	= bcm_kona_usb_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int bcm_kona_usb2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm_kona_usb *phy;
+	struct resource *res;
+	struct phy *gphy;
+	struct phy_provider *phy_provider;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	phy->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(phy->regs))
+		return PTR_ERR(phy->regs);
+
+	platform_set_drvdata(pdev, phy);
+
+	gphy = devm_phy_create(dev, &ops, NULL);
+	if (IS_ERR(gphy))
+		return PTR_ERR(gphy);
+
+	/* The Kona PHY supports an 8-bit wide UTMI interface */
+	phy_set_bus_width(gphy, 8);
+
+	phy_set_drvdata(gphy, phy);
+
+	phy_provider = devm_of_phy_provider_register(dev,
+			of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	return 0;
+}
+
+static const struct of_device_id bcm_kona_usb2_dt_ids[] = {
+	{ .compatible = "brcm,kona-usb2-phy" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, bcm_kona_usb2_dt_ids);
+
+static struct platform_driver bcm_kona_usb2_driver = {
+	.probe		= bcm_kona_usb2_probe,
+	.driver		= {
+		.name	= "bcm-kona-usb2",
+		.owner	= THIS_MODULE,
+		.of_match_table = bcm_kona_usb2_dt_ids,
+	},
+};
+
+module_platform_driver(bcm_kona_usb2_driver);
+
+MODULE_ALIAS("platform:bcm-kona-usb2");
+MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
+MODULE_DESCRIPTION("BCM Kona USB 2.0 PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
1.8.4

[PATCH v8 9/9] ARM: dts: add usb udc support to bcm281xx

[Matt Porter]

Adds USB OTG/PHY and clock support to BCM281xx and enables
UDC support on the bcm11351-brt and bcm28155-ap boards.

Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
---
 arch/arm/boot/dts/bcm11351-brt.dts |  6 ++++++
 arch/arm/boot/dts/bcm11351.dtsi    | 18 ++++++++++++++++++
 arch/arm/boot/dts/bcm28155-ap.dts  |  8 ++++++++
 3 files changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts
index 23cd16d..396b704 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm11351-brt.dts
@@ -44,5 +44,11 @@
 		status = "okay";
 	};
 
+	usbotg: usb@3f120000 {
+		status = "okay";
+	};
 
+	usbphy: usb-phy@3f130000 {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 1246885..0fbb455 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -243,4 +243,22 @@
 			#clock-cells = <0>;
 		};
 	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 08e47c2..a3bc436 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -43,4 +43,12 @@
 		cd-gpios = <&gpio 14 0>;
 		status = "okay";
 	};
+
+	usbotg: usb@3f120000 {
+		status = "okay";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		status = "okay";
+	};
 };
-- 
1.8.4

Re: [PATCH v8 9/9] ARM: dts: add usb udc support to bcm281xx

[Christian Daudt]

On Thu, Dec 19, 2013 at 6:23 AM, Matt Porter <mporter@linaro.org> wrote:
> Adds USB OTG/PHY and clock support to BCM281xx and enables
> UDC support on the bcm11351-brt and bcm28155-ap boards.
>
> Signed-off-by: Matt Porter <mporter@linaro.org>
> Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
> Reviewed-by: Tim Kryger <tim.kryger@linaro.org>

Applied to armsoc/for-3.14/dt

 thanks,
   csd

Re: [PATCH v8 9/9] ARM: dts: add usb udc support to bcm281xx

[Felipe Balbi]

[-- Attachment #1.1: Type: text/plain, Size: 828 bytes --]

On Thu, Dec 19, 2013 at 09:23:10AM -0500, Matt Porter wrote:
> Adds USB OTG/PHY and clock support to BCM281xx and enables
> UDC support on the bcm11351-brt and bcm28155-ap boards.
> 
> Signed-off-by: Matt Porter <mporter@linaro.org>
> Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
> Reviewed-by: Tim Kryger <tim.kryger@linaro.org>

doesn't apply to my tree:

checking file arch/arm/boot/dts/bcm11351-brt.dts
checking file arch/arm/boot/dts/bcm11351.dtsi
Hunk #1 FAILED at 243.
1 out of 1 hunk FAILED
checking file arch/arm/boot/dts/bcm28155-ap.dts

I will skip this patch from my tree, all others are now in my
testing/next branch after fixing dependency ARM-only for now.

Send me a patch removing ARCH dependency for v3.15, since this driver
can be used in other arches too.

cheers

-- 
balbi

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel