From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matt Porter Subject: [PATCH v8 7/9] phy: add Broadcom Kona USB2 PHY DT binding Date: Thu, 19 Dec 2013 09:23:08 -0500 Message-ID: <1387462990-12039-8-git-send-email-mporter@linaro.org> References: <1387462990-12039-1-git-send-email-mporter@linaro.org> Return-path: In-Reply-To: <1387462990-12039-1-git-send-email-mporter@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Felipe Balbi , Greg Kroah-Hartman , Kishon Vijay Abraham I , Rob Herring , Pawel Moll , Mark Rutland , Kumar Gala , Ian Campbell , Christian Daudt , Paul Zimmerman Cc: Tomasz Figa , Kamil Debski , Kyungmin Park , Dinh Nguyen , Russell King , Linux USB List , Linux ARM Kernel List , Linux Kernel Mailing List , Devicetree List , Linaro Patches List-Id: devicetree@vger.kernel.org Add a binding that describes the Broadcom Kona USB2 PHY found on the BCM281xx family of SoCs. Signed-off-by: Matt Porter Acked-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/phy/bcm-phy.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/bcm-phy.txt diff --git a/Documentation/devicetree/bindings/phy/bcm-phy.txt b/Documentation/devicetree/bindings/phy/bcm-phy.txt new file mode 100644 index 0000000..3dc8b3d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-phy.txt @@ -0,0 +1,15 @@ +BROADCOM KONA USB2 PHY + +Required properties: + - compatible: brcm,kona-usb2-phy + - reg: offset and length of the PHY registers + - #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + + usbphy: usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + }; -- 1.8.4