From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Chen Subject: [PATCH v7 04/14] usb: doc: phy-mxs: update binding for adding anatop phandle Date: Fri, 20 Dec 2013 15:52:00 +0800 Message-ID: <1387525930-27313-5-git-send-email-peter.chen@freescale.com> References: <1387525930-27313-1-git-send-email-peter.chen@freescale.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1387525930-27313-1-git-send-email-peter.chen@freescale.com> Sender: linux-doc-owner@vger.kernel.org To: balbi@ti.com, shawn.guo@linaro.org, rob.herring@calxeda.com, grant.likely@linaro.org Cc: linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, festevam@gmail.com, marex@denx.de, kernel@pengutronix.de, m.grzeschik@pengutronix.de, frank.li@freescale.com, peter.chen@freescale.com, gregkh@linuxfoundation.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org List-Id: devicetree@vger.kernel.org Add anatop phandle which is used to access anatop registers to control PHY's power and other USB operations. Signed-off-by: Peter Chen --- Documentation/devicetree/bindings/usb/mxs-phy.txt | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt index b43d4c9e..fc6659d 100644 --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt @@ -5,10 +5,12 @@ Required properties: for imx6dq and imx6dl, "fsl,imx6sl-usbphy" for imx6sl - reg: Should contain registers location and length - interrupts: Should contain phy interrupt +- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series Example: usbphy1: usbphy@020c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; + fsl,anatop = <&anatop>; }; -- 1.7.8