From: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: balbi-l0cyMroinI0@public.gmane.org,
shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
marex-ynQEQJNshbs@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
frank.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v8 00/12] Add power management support for mxs phy
Date: Tue, 24 Dec 2013 11:58:44 +0800 [thread overview]
Message-ID: <1387857536-4996-1-git-send-email-peter.chen@freescale.com> (raw)
Hi Felipe & Shawn,
The serial adds power management support for MXS PHY, it includes:
- Add one PHY API .set_wakeup, and related API implementation at mxs phy driver
- misc changes and bug fixes for mxs phy to support low power mode and wakeup.
It is based on Greg's usb-next, 3.13-rc1.
Changes for v8:
- Shawn has already applied two dts patches, so delete them at
v8 version, http://marc.info/?l=linux-arm-kernel&m=138785188404939&w=2
- Using of_get_property to avoid imx6 fail at probe when using old DTB [5/12]
- Do not consider failure if alias id is not existed, it can avoid fail
at probe when using old DTB [8/12]
- We don't need more changes for [8/12] change due to we use
"mxs_phy->port_id ==" as condition
Changes for v7:
- Fixed indentation problem at binding doc [1/14]
- s/ganranteed/guaranteed, and add explanation for "auto setting" [3/14]
- add static before SIMPLE_DEV_PM_OPS [13/14]
- add one patch to change usb device description [7/14]
- Delete the .nofity_suspend and .notify_resume due to Felipe
does not agree to add them as PHY API, will use other ways to implement
them in future.
Changes for v6:
- Add description for IC bug fixes logic. [9/15]
- Move is_imx6q_phy and is_imx6sl_phy from [9/15] to [14/15]
- %s/mxs_phy_clock_switch/mxs_phy_clock_switch_delay to reflect
the function meaning more precise [15/15]
Changes for v5:
Add Marc and Michael Grzeschik's commnets
- typo error at [2/15]
- sqhash patches which introducing mxs_phy_disconnect_line and
fixed but at this function. [13/15]
- Introducing flag MXS_PHY_NEED_IP_FIX who stands for the SoCs
who have IC fixes. [2/15, 8/15]
- Delete one patch for low speed connection problem at every rare
situations due to the root cause has still not found.
Peter Chen (12):
usb: doc: phy-mxs: Add more compatible strings
usb: phy-mxs: Add platform judgement code
usb: phy-mxs: Add auto clock and power setting
usb: doc: phy-mxs: update binding for adding anatop phandle
usb: phy-mxs: Add anatop regmap
usb: phy-mxs: change description of usb device speed
usb: phy-mxs: Enable IC fixes for related SoCs
usb: phy-mxs: add controller id
usb: phy: Add set_wakeup API
usb: phy-mxs: Add implementation of set_wakeup
usb: phy-mxs: Add system suspend/resume API
usb: phy-mxs: Add sync time after controller clear phcd
Documentation/devicetree/bindings/usb/mxs-phy.txt | 5 +-
drivers/usb/phy/phy-mxs-usb.c | 308 ++++++++++++++++++++-
include/linux/usb/phy.h | 16 +
3 files changed, 314 insertions(+), 15 deletions(-)
--
1.7.8
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2013-12-24 3:58 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-24 3:58 Peter Chen [this message]
[not found] ` <1387857536-4996-1-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-12-24 3:58 ` [PATCH v8 01/12] usb: doc: phy-mxs: Add more compatible strings Peter Chen
2013-12-24 3:58 ` [PATCH v8 02/12] usb: phy-mxs: Add platform judgement code Peter Chen
2013-12-24 3:58 ` [PATCH v8 03/12] usb: phy-mxs: Add auto clock and power setting Peter Chen
2013-12-24 3:58 ` [PATCH v8 04/12] usb: doc: phy-mxs: update binding for adding anatop phandle Peter Chen
2013-12-24 3:58 ` [PATCH v8 06/12] usb: phy-mxs: change description of usb device speed Peter Chen
2013-12-24 3:58 ` [PATCH v8 08/12] usb: phy-mxs: add controller id Peter Chen
2013-12-24 3:58 ` [PATCH v8 10/12] usb: phy-mxs: Add implementation of set_wakeup Peter Chen
2013-12-24 3:58 ` [PATCH v8 12/12] usb: phy-mxs: Add sync time after controller clear phcd Peter Chen
2013-12-24 3:58 ` [PATCH v8 05/12] usb: phy-mxs: Add anatop regmap Peter Chen
2013-12-24 3:58 ` [PATCH v8 07/12] usb: phy-mxs: Enable IC fixes for related SoCs Peter Chen
2013-12-24 3:58 ` [PATCH v8 09/12] usb: phy: Add set_wakeup API Peter Chen
2013-12-24 3:58 ` [PATCH v8 11/12] usb: phy-mxs: Add system suspend/resume API Peter Chen
[not found] ` <1387857536-4996-12-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-12-26 16:25 ` Felipe Balbi
2013-12-27 1:48 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387857536-4996-1-git-send-email-peter.chen@freescale.com \
--to=peter.chen-kzfg59tc24xl57midrcfdg@public.gmane.org \
--cc=alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=frank.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=marex-ynQEQJNshbs@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).