From: Loc Ho <lho@apm.com>
To: olof@lixom.net, tj@kernel.org, arnd@arndb.de
Cc: linux-scsi@vger.kernel.org, linux-ide@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
jcm@redhat.com, patches@apm.com, Loc Ho <lho@apm.com>,
Tuan Phan <tphan@apm.com>, Suman Tripathi <stripathi@apm.com>
Subject: [PATCH v7 0/4] ata: Add APM X-Gene SoC SATA host controller support
Date: Thu, 2 Jan 2014 17:22:15 -0700 [thread overview]
Message-ID: <1388708539-333-1-git-send-email-lho@apm.com> (raw)
This patch adds support for the APM X-Gene SoC SATA host controller. In
order for the host controller to work, the corresponding PHY driver
musts also be available.
v7:
* Update the clock code by toggle the clock
* Update the DTS clock mask values due to the clock spilt between host and
v5 of the PHY drivers
v6:
* Update binding documentation
* Change select PHY_XGENE_SATA to PHY_XGENE
* Add ULL to constants
* Change indentation and comments
* Clean up the probe functions a bit more
* Remove xgene_ahci_remove function
* Add the flush register to DTS
* Remove the interrupt-parent from DTS
v5:
* Sync up to v3 of the PHY driver
* Remove MSLIM wrapper functions
* Change the memory shutdown loop to use usleep_range
* Use devm_ioremap_resource instead devm_ioremap
* Remove suspend/resume functions as not needed
v4:
* Remove the ID property in DT
* Remove the temporary PHY direct function call and use PHY function
* Change printk to pr_debug
* Move the IOB flush addresses into the DT
* Remove the parameters retrieval function as no longer needed
* Remove the header file as no longer needed
* Require v2 patch of the SATA PHY driver. Require slightly modification
in the Kconfig as it is moved to folder driver/phy and use Kconfig
PHY_XGENE_SATA instead SATA_XGENE_PHY.
v3:
* Move out the SATA PHY to another driver
* Remove the clock-cells entry from DTS
* Remove debug wrapper
* Remove delay functions wrapper
* Clean up resource and IRQ query
* Remove query clock name
* Switch to use dma_set_mask/dma_coherent_mask
* Remove un-necessary devm_kfree
* Update GPL license header to v2
* Spilt up function xgene_ahci_hardreset
* Spilt up function xgene_ahci_probe
* Remove all reference of CONFIG_ARCH_MSLIM
* Clean up chip revision code
v2:
* Clean up file sata_xgene.c with Lindent and etc
* Clean up file sata_xgene_serdes.c with Lindent and etc
* Add description to each patch
v1:
* inital version
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Tuan Phan <tphan@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
---
Loc Ho (4):
ata: Export required functions by APM X-Gene SATA driver
Documentation: Add documentation for APM X-Gene SoC SATA host
controller DTS binding
ata: Add APM X-Gene SoC SATA host controller driver
arm64: Add APM X-Gene SoC SATA host controller DTS entries
.../devicetree/bindings/ata/apm-xgene.txt | 68 ++
arch/arm64/boot/dts/apm-storm.dtsi | 81 ++
drivers/ata/Kconfig | 8 +
drivers/ata/Makefile | 1 +
drivers/ata/ahci.h | 9 +
drivers/ata/libahci.c | 16 +-
drivers/ata/sata_xgene.c | 1071 ++++++++++++++++++++
7 files changed, 1248 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/apm-xgene.txt
create mode 100644 drivers/ata/sata_xgene.c
next reply other threads:[~2014-01-03 0:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-03 0:22 Loc Ho [this message]
2014-01-03 0:22 ` [PATCH v7 1/4] ata: Export required functions by APM X-Gene SATA driver Loc Ho
2014-01-03 0:22 ` [PATCH v7 2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding Loc Ho
2014-01-03 0:22 ` [PATCH v7 3/4] ata: Add APM X-Gene SoC SATA host controller driver Loc Ho
2014-01-03 0:22 ` [PATCH v7 4/4] arm64: Add APM X-Gene SoC SATA host controller DTS entries Loc Ho
2014-01-03 15:33 ` Arnd Bergmann
2014-01-03 17:23 ` Loc Ho
2014-01-03 19:28 ` Arnd Bergmann
2014-01-03 15:52 ` [PATCH v7 3/4] ata: Add APM X-Gene SoC SATA host controller driver Arnd Bergmann
2014-01-03 19:59 ` Loc Ho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1388708539-333-1-git-send-email-lho@apm.com \
--to=lho@apm.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=jcm@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=olof@lixom.net \
--cc=patches@apm.com \
--cc=stripathi@apm.com \
--cc=tj@kernel.org \
--cc=tphan@apm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).