From: Nicolin Chen <Guangyu.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org
Cc: dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 1/2] Revert "ARM: dts: imx: use dual-fifo sdma script for ssi"
Date: Wed, 8 Jan 2014 16:45:55 +0800 [thread overview]
Message-ID: <1389170756-22351-2-git-send-email-Guangyu.Chen@freescale.com> (raw)
In-Reply-To: <1389170756-22351-1-git-send-email-Guangyu.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
This reverts commit b1d27c79c8377df1880447375deffa3bb82c7bd3.
Previously we switched the SSI scriprt to dual-fifo mode to reduce playback
underrun issue, which is only included by SDMA firmware version 2. However,
there are quite a lot people still using version 1 or default firmware in
the ROM code of SoC while these two kinds of firmwares do not support the
dual-fifo script and the audio function on their platform would be broken.
Thus this patch provisionally reverts the dual-fifo script to the original
single fifo script to meet all kinds of users' requirements, including the
version 1/2 or inner ROM firmware.
Reported-by: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Nicolin Chen <Guangyu.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
arch/arm/boot/dts/imx51.dtsi | 4 ++--
arch/arm/boot/dts/imx53.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl.dtsi | 12 ++++++------
arch/arm/boot/dts/imx6sl.dtsi | 12 ++++++------
4 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 5be2837..4bcdd3a 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -159,8 +159,8 @@
reg = <0x70014000 0x4000>;
interrupts = <30>;
clocks = <&clks 49>;
- dmas = <&sdma 24 22 0>,
- <&sdma 25 22 0>;
+ dmas = <&sdma 24 1 0>,
+ <&sdma 25 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 7208fde..4307e80 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -153,8 +153,8 @@
reg = <0x50014000 0x4000>;
interrupts = <30>;
clocks = <&clks 49>;
- dmas = <&sdma 24 22 0>,
- <&sdma 25 22 0>;
+ dmas = <&sdma 24 1 0>,
+ <&sdma 25 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index e9534f2..fb28b2e 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -236,8 +236,8 @@
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
clocks = <&clks 178>;
- dmas = <&sdma 37 22 0>,
- <&sdma 38 22 0>;
+ dmas = <&sdma 37 1 0>,
+ <&sdma 38 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <38 37>;
@@ -249,8 +249,8 @@
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
clocks = <&clks 179>;
- dmas = <&sdma 41 22 0>,
- <&sdma 42 22 0>;
+ dmas = <&sdma 41 1 0>,
+ <&sdma 42 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <42 41>;
@@ -262,8 +262,8 @@
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
clocks = <&clks 180>;
- dmas = <&sdma 45 22 0>,
- <&sdma 46 22 0>;
+ dmas = <&sdma 45 1 0>,
+ <&sdma 46 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <46 45>;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 7b57fec..28558f1 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -199,8 +199,8 @@
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
clocks = <&clks IMX6SL_CLK_SSI1>;
- dmas = <&sdma 37 22 0>,
- <&sdma 38 22 0>;
+ dmas = <&sdma 37 1 0>,
+ <&sdma 38 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
@@ -211,8 +211,8 @@
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
clocks = <&clks IMX6SL_CLK_SSI2>;
- dmas = <&sdma 41 22 0>,
- <&sdma 42 22 0>;
+ dmas = <&sdma 41 1 0>,
+ <&sdma 42 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
@@ -223,8 +223,8 @@
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
clocks = <&clks IMX6SL_CLK_SSI3>;
- dmas = <&sdma 45 22 0>,
- <&sdma 46 22 0>;
+ dmas = <&sdma 45 1 0>,
+ <&sdma 46 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
--
1.8.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-01-08 8:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-08 8:45 [PATCH 0/2] Fix SSI audio function regression when using ROM firmware Nicolin Chen
[not found] ` <1389170756-22351-1-git-send-email-Guangyu.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2014-01-08 8:45 ` Nicolin Chen [this message]
2014-01-08 12:03 ` [PATCH 1/2] Revert "ARM: dts: imx: use dual-fifo sdma script for ssi" Fabio Estevam
2014-01-10 2:44 ` Shawn Guo
2014-01-13 9:20 ` Vinod Koul
2014-01-13 9:22 ` [PATCH 0/2] Fix SSI audio function regression when using ROM firmware Vinod Koul
2014-01-08 8:45 ` [PATCH 2/2] dma: imx-sdma: Assign a default script number for ROM firmware cases Nicolin Chen
[not found] ` <1389170756-22351-3-git-send-email-Guangyu.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2014-01-08 12:03 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389170756-22351-2-git-send-email-Guangyu.Chen@freescale.com \
--to=guangyu.chen-kzfg59tc24xl57midrcfdg@public.gmane.org \
--cc=dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).