[PATCH v3 1/3] ata: ahci_platform: Update DT compatible list

[Roger Quadros <rogerq@ti.com>]

The ahci_platform driver supports "snps,exynos5440-ahci" and
"ibm,476gtr-ahci". Add this to the DT binding information.

Also add compatible string "snps,dwc-ahci", which should be used
for Synopsis Designware SATA cores. e.g. on TI OMAP5 and DRA7 platforms.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 Documentation/devicetree/bindings/ata/ahci-platform.txt | 4 +++-
 drivers/ata/ahci_platform.c                             | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 89de156..08ba647 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -4,7 +4,9 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "snps,spear-ahci"
+- compatible        : compatible list, contains "snps,spear-ahci",
+		      "snps,exynos5440-ahci", "ibm,476gtr-ahci",
+		      or "snps,dwc-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 4b231ba..d5ced13 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -330,6 +330,7 @@ static const struct of_device_id ahci_of_match[] = {
 	{ .compatible = "snps,spear-ahci", },
 	{ .compatible = "snps,exynos5440-ahci", },
 	{ .compatible = "ibm,476gtr-ahci", },
+	{ .compatible = "snps,dwc-ahci", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);
-- 
1.8.3.2