From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tero Kristo Subject: [PATCHv13 13/40] CLK: TI: omap5: Initialize USB_DPLL at boot Date: Thu, 9 Jan 2014 16:00:24 +0200 Message-ID: <1389276051-1326-14-git-send-email-t-kristo@ti.com> References: <1389276051-1326-1-git-send-email-t-kristo@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1389276051-1326-1-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org, tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org, nm-l0cyMroinI0@public.gmane.org, rnayak-l0cyMroinI0@public.gmane.org, bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Roger Quadros List-Id: devicetree@vger.kernel.org From: Roger Quadros USB_DPLL must be initialized and locked at boot so that USB modules can work. Signed-off-by: Roger Quadros Signed-off-by: Tero Kristo Tested-by: Nishanth Menon Acked-by: Tony Lindgren --- drivers/clk/ti/clk-54xx.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c index c876e6e..0ef9f58 100644 --- a/drivers/clk/ti/clk-54xx.c +++ b/drivers/clk/ti/clk-54xx.c @@ -19,6 +19,12 @@ #define OMAP5_DPLL_ABE_DEFFREQ 98304000 +/* + * OMAP543x TRM, section "3.6.3.9.5 DPLL_USB Preferred Settings" + * states it must be at 960MHz + */ +#define OMAP5_DPLL_USB_DEFFREQ 960000000 + static struct ti_dt_clk omap54xx_clks[] = { DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"), DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"), @@ -220,7 +226,7 @@ static struct ti_dt_clk omap54xx_clks[] = { int __init omap5xxx_dt_clk_init(void) { int rc; - struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck; + struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll; ti_dt_clocks_register(omap54xx_clks); @@ -235,5 +241,15 @@ int __init omap5xxx_dt_clk_init(void) if (rc) pr_err("%s: failed to configure ABE DPLL!\n", __func__); + usb_dpll = clk_get_sys(NULL, "dpll_usb_ck"); + rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ); + if (rc) + pr_err("%s: failed to configure USB DPLL!\n", __func__); + + usb_dpll = clk_get_sys(NULL, "dpll_usb_m2_ck"); + rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ/2); + if (rc) + pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__); + return 0; } -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html