devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
To: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org,
	tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
	nm-l0cyMroinI0@public.gmane.org,
	rnayak-l0cyMroinI0@public.gmane.org,
	bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
	mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCHv13 39/40] ARM: AM33xx: remove old clock data and link in new clock init code
Date: Thu, 9 Jan 2014 16:00:50 +0200	[thread overview]
Message-ID: <1389276051-1326-40-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1389276051-1326-1-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org>

AM33xx clocks have now been moved to DT, thus remove the old data file
and use the new init code under OMAP clock driver.

Signed-off-by: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
Tested-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/mach-omap2/Makefile          |    1 -
 arch/arm/mach-omap2/cclock33xx_data.c | 1064 ---------------------------------
 arch/arm/mach-omap2/io.c              |    2 +-
 3 files changed, 1 insertion(+), 1066 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/cclock33xx_data.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e9d63ec..088305f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -189,7 +189,6 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX)		+= cclock33xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
 obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 
diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c
deleted file mode 100644
index 865d30e..0000000
--- a/arch/arm/mach-omap2/cclock33xx_data.c
+++ /dev/null
@@ -1,1064 +0,0 @@
-/*
- * AM33XX Clock data
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- * Vaibhav Hiremath <hvaibhav-l0cyMroinI0@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk-private.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-
-#include "am33xx.h"
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "control.h"
-#include "cm.h"
-#include "cm33xx.h"
-#include "cm-regbits-33xx.h"
-#include "prm.h"
-
-/* Modulemode control */
-#define AM33XX_MODULEMODE_HWCTRL_SHIFT		0
-#define AM33XX_MODULEMODE_SWCTRL_SHIFT		1
-
-/*LIST_HEAD(clocks);*/
-
-/* Root clocks */
-
-/* RTC 32k */
-DEFINE_CLK_FIXED_RATE(clk_32768_ck, CLK_IS_ROOT, 32768, 0x0);
-
-/* On-Chip 32KHz RC OSC */
-DEFINE_CLK_FIXED_RATE(clk_rc32k_ck, CLK_IS_ROOT, 32000, 0x0);
-
-/* Crystal input clks */
-DEFINE_CLK_FIXED_RATE(virt_19200000_ck, CLK_IS_ROOT, 19200000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_24000000_ck, CLK_IS_ROOT, 24000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_25000000_ck, CLK_IS_ROOT, 25000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(virt_26000000_ck, CLK_IS_ROOT, 26000000, 0x0);
-
-/* Oscillator clock */
-/* 19.2, 24, 25 or 26 MHz */
-static const char *sys_clkin_ck_parents[] = {
-	"virt_19200000_ck", "virt_24000000_ck", "virt_25000000_ck",
-	"virt_26000000_ck",
-};
-
-/*
- * sys_clk in: input to the dpll and also used as funtional clock for,
- *   adc_tsc, smartreflex0-1, timer1-7, mcasp0-1, dcan0-1, cefuse
- *
- */
-DEFINE_CLK_MUX(sys_clkin_ck, sys_clkin_ck_parents, NULL, 0x0,
-	       AM33XX_CTRL_REGADDR(AM33XX_CONTROL_STATUS),
-	       AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT,
-	       AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH,
-	       0, NULL);
-
-/* External clock - 12 MHz */
-DEFINE_CLK_FIXED_RATE(tclkin_ck, CLK_IS_ROOT, 12000000, 0x0);
-
-/* Module clocks and DPLL outputs */
-
-/* DPLL_CORE */
-static struct dpll_data dpll_core_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_CORE,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_CORE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_CORE,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKDCOLDO output */
-static const char *dpll_core_ck_parents[] = {
-	"sys_clkin_ck",
-};
-
-static struct clk dpll_core_ck;
-
-static const struct clk_ops dpll_core_ck_ops = {
-	.recalc_rate	= &omap3_dpll_recalc,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_core_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_core_ck,
-	},
-	.dpll_data	= &dpll_core_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_core_ck, dpll_core_ck_parents, dpll_core_ck_ops);
-
-static const char *dpll_core_x2_ck_parents[] = {
-	"dpll_core_ck",
-};
-
-static struct clk dpll_core_x2_ck;
-
-static const struct clk_ops dpll_x2_ck_ops = {
-	.recalc_rate	= &omap3_clkoutx2_recalc,
-};
-
-static struct clk_hw_omap dpll_core_x2_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_core_x2_ck,
-	},
-	.flags		= CLOCK_CLKOUTX2,
-};
-
-DEFINE_STRUCT_CLK(dpll_core_x2_ck, dpll_core_x2_ck_parents, dpll_x2_ck_ops);
-
-DEFINE_CLK_DIVIDER(dpll_core_m4_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M4_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH, CLK_DIVIDER_ONE_BASED,
-		   NULL);
-
-DEFINE_CLK_DIVIDER(dpll_core_m5_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M5_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-DEFINE_CLK_DIVIDER(dpll_core_m6_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
-		   0x0, AM33XX_CM_DIV_M6_DPLL_CORE,
-		   AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT,
-		   AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-
-/* DPLL_MPU */
-static struct dpll_data dpll_mpu_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_MPU,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_MPU,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_MPU,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_mpu_ck;
-
-static const struct clk_ops dpll_mpu_ck_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-	.recalc_rate	= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.get_parent	= &omap2_init_dpll_parent,
-};
-
-static struct clk_hw_omap dpll_mpu_ck_hw = {
-	.hw = {
-		.clk	= &dpll_mpu_ck,
-	},
-	.dpll_data	= &dpll_mpu_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_mpu_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_mpu_m2_ck, "dpll_mpu_ck", &dpll_mpu_ck,
-		   0x0, AM33XX_CM_DIV_M2_DPLL_MPU, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
-		   AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
-
-/* DPLL_DDR */
-static struct dpll_data dpll_ddr_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_DDR,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_DDR,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_DDR,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_ddr_ck;
-
-static const struct clk_ops dpll_ddr_ck_ops = {
-	.recalc_rate	= &omap3_dpll_recalc,
-	.get_parent	= &omap2_init_dpll_parent,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-};
-
-static struct clk_hw_omap dpll_ddr_ck_hw = {
-	.hw = {
-		.clk	= &dpll_ddr_ck,
-	},
-	.dpll_data	= &dpll_ddr_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_ddr_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_ddr_m2_ck, "dpll_ddr_ck", &dpll_ddr_ck,
-		   0x0, AM33XX_CM_DIV_M2_DPLL_DDR,
-		   AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-/* emif_fck functional clock */
-DEFINE_CLK_FIXED_FACTOR(dpll_ddr_m2_div2_ck, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck,
-			0x0, 1, 2);
-
-/* DPLL_DISP */
-static struct dpll_data dpll_disp_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_DISP,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_DISP,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_DISP,
-	.mult_mask	= AM33XX_DPLL_MULT_MASK,
-	.div1_mask	= AM33XX_DPLL_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-/* CLKOUT: fdpll/M2 */
-static struct clk dpll_disp_ck;
-
-static struct clk_hw_omap dpll_disp_ck_hw = {
-	.hw = {
-		.clk	= &dpll_disp_ck,
-	},
-	.dpll_data	= &dpll_disp_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_disp_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/*
- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
- * and ALT_CLK1/2)
- */
-DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck,
-		   CLK_SET_RATE_PARENT, AM33XX_CM_DIV_M2_DPLL_DISP,
-		   AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
-
-/* DPLL_PER */
-static struct dpll_data dpll_per_dd = {
-	.mult_div1_reg	= AM33XX_CM_CLKSEL_DPLL_PERIPH,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= AM33XX_CM_CLKMODE_DPLL_PER,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.idlest_reg	= AM33XX_CM_IDLEST_DPLL_PER,
-	.mult_mask	= AM33XX_DPLL_MULT_PERIPH_MASK,
-	.div1_mask	= AM33XX_DPLL_PER_DIV_MASK,
-	.enable_mask	= AM33XX_DPLL_EN_MASK,
-	.idlest_mask	= AM33XX_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-	.flags		= DPLL_J_TYPE,
-};
-
-/* CLKDCOLDO */
-static struct clk dpll_per_ck;
-
-static struct clk_hw_omap dpll_per_ck_hw = {
-	.hw	= {
-		.clk	= &dpll_per_ck,
-	},
-	.dpll_data	= &dpll_per_dd,
-	.ops		= &clkhwops_omap3_dpll,
-};
-
-DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
-
-/* CLKOUT: fdpll/M2 */
-DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0,
-		   AM33XX_CM_DIV_M2_DPLL_PER, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
-		   AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED,
-		   NULL);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_wkupdm_ck, "dpll_per_m2_ck",
-			&dpll_per_m2_ck, 0x0, 1, 4);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_ck, "dpll_per_m2_ck",
-			&dpll_per_m2_ck, 0x0, 1, 4);
-
-DEFINE_CLK_FIXED_FACTOR(dpll_core_m4_div2_ck, "dpll_core_m4_ck",
-			&dpll_core_m4_ck, 0x0, 1, 2);
-
-DEFINE_CLK_FIXED_FACTOR(l4_rtc_gclk, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
-			1, 2);
-
-DEFINE_CLK_FIXED_FACTOR(clk_24mhz, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1,
-			8);
-
-/*
- * Below clock nodes describes clockdomains derived out
- * of core clock.
- */
-static const struct clk_ops clk_ops_null = {
-};
-
-static const char *l3_gclk_parents[] = {
-	"dpll_core_m4_ck"
-};
-
-static struct clk l3_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l3_gclk, NULL);
-DEFINE_STRUCT_CLK(l3_gclk, l3_gclk_parents, clk_ops_null);
-
-static struct clk l4hs_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4hs_gclk, NULL);
-DEFINE_STRUCT_CLK(l4hs_gclk, l3_gclk_parents, clk_ops_null);
-
-static const char *l3s_gclk_parents[] = {
-	"dpll_core_m4_div2_ck"
-};
-
-static struct clk l3s_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l3s_gclk, NULL);
-DEFINE_STRUCT_CLK(l3s_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk l4fw_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4fw_gclk, NULL);
-DEFINE_STRUCT_CLK(l4fw_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk l4ls_gclk;
-DEFINE_STRUCT_CLK_HW_OMAP(l4ls_gclk, NULL);
-DEFINE_STRUCT_CLK(l4ls_gclk, l3s_gclk_parents, clk_ops_null);
-
-static struct clk sysclk_div_ck;
-DEFINE_STRUCT_CLK_HW_OMAP(sysclk_div_ck, NULL);
-DEFINE_STRUCT_CLK(sysclk_div_ck, l3_gclk_parents, clk_ops_null);
-
-/*
- * In order to match the clock domain with hwmod clockdomain entry,
- * separate clock nodes is required for the modules which are
- * directly getting their funtioncal clock from sys_clkin.
- */
-static struct clk adc_tsc_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(adc_tsc_fck, NULL);
-DEFINE_STRUCT_CLK(adc_tsc_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk dcan0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(dcan0_fck, NULL);
-DEFINE_STRUCT_CLK(dcan0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk dcan1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(dcan1_fck, NULL);
-DEFINE_STRUCT_CLK(dcan1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk mcasp0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(mcasp0_fck, NULL);
-DEFINE_STRUCT_CLK(mcasp0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk mcasp1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(mcasp1_fck, NULL);
-DEFINE_STRUCT_CLK(mcasp1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk smartreflex0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(smartreflex0_fck, NULL);
-DEFINE_STRUCT_CLK(smartreflex0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk smartreflex1_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(smartreflex1_fck, NULL);
-DEFINE_STRUCT_CLK(smartreflex1_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk sha0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(sha0_fck, NULL);
-DEFINE_STRUCT_CLK(sha0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk aes0_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(aes0_fck, NULL);
-DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null);
-
-static struct clk rng_fck;
-DEFINE_STRUCT_CLK_HW_OMAP(rng_fck, NULL);
-DEFINE_STRUCT_CLK(rng_fck, dpll_core_ck_parents, clk_ops_null);
-
-/*
- * Modules clock nodes
- *
- * The following clock leaf nodes are added for the moment because:
- *
- *  - hwmod data is not present for these modules, either hwmod
- *    control is not required or its not populated.
- *  - Driver code is not yet migrated to use hwmod/runtime pm
- *  - Modules outside kernel access (to disable them by default)
- *
- *     - mmu (gfx domain)
- *     - cefuse
- *     - usbotg_fck (its additional clock and not really a modulemode)
- *     - ieee5000
- */
-
-DEFINE_CLK_GATE(mmu_fck, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
-		AM33XX_CM_GFX_MMUDATA_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
-		AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
-
-/*
- * clkdiv32 is generated from fixed division of 732.4219
- */
-DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732);
-
-static struct clk clkdiv32k_ick;
-
-static const char *clkdiv32k_ick_parent_names[] = {
-	"clkdiv32k_ck",
-};
-
-static const struct clk_ops clkdiv32k_ick_ops = {
-	.enable         = &omap2_dflt_clk_enable,
-	.disable        = &omap2_dflt_clk_disable,
-	.is_enabled     = &omap2_dflt_clk_is_enabled,
-	.init           = &omap2_init_clk_clkdm,
-};
-
-static struct clk_hw_omap clkdiv32k_ick_hw = {
-	.hw	= {
-		.clk	= &clkdiv32k_ick,
-	},
-	.enable_reg	= AM33XX_CM_PER_CLKDIV32K_CLKCTRL,
-	.enable_bit	= AM33XX_MODULEMODE_SWCTRL_SHIFT,
-	.clkdm_name	= "clk_24mhz_clkdm",
-};
-
-DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops);
-
-/* "usbotg_fck" is an additional clock and not really a modulemode */
-DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0,
-		AM33XX_CM_CLKDCOLDO_DPLL_PER, AM33XX_ST_DPLL_CLKDCOLDO_SHIFT,
-		0x0, NULL);
-
-DEFINE_CLK_GATE(ieee5000_fck, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck,
-		0x0, AM33XX_CM_PER_IEEE5000_CLKCTRL,
-		AM33XX_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
-
-/* Timers */
-static const struct clksel timer1_clkmux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
-	{ .parent = &tclkin_ck, .rates = div_1_2_rates },
-	{ .parent = &clk_rc32k_ck, .rates = div_1_3_rates },
-	{ .parent = &clk_32768_ck, .rates = div_1_4_rates },
-	{ .parent = NULL },
-};
-
-static const char *timer1_ck_parents[] = {
-	"sys_clkin_ck", "clkdiv32k_ick", "tclkin_ck", "clk_rc32k_ck",
-	"clk_32768_ck",
-};
-
-static struct clk timer1_fck;
-
-static const struct clk_ops timer1_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static struct clk_hw_omap timer1_fck_hw = {
-	.hw	= {
-		.clk	= &timer1_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer1_clkmux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER1MS_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_2_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer1_fck, timer1_ck_parents, timer1_fck_ops);
-
-static const struct clksel timer2_to_7_clk_sel[] = {
-	{ .parent = &tclkin_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_clkin_ck, .rates = div_1_1_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const char *timer2_to_7_ck_parents[] = {
-	"tclkin_ck", "sys_clkin_ck", "clkdiv32k_ick",
-};
-
-static struct clk timer2_fck;
-
-static struct clk_hw_omap timer2_fck_hw = {
-	.hw	= {
-		.clk	= &timer2_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER2_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer2_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer3_fck;
-
-static struct clk_hw_omap timer3_fck_hw = {
-	.hw	= {
-		.clk	= &timer3_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER3_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer3_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer4_fck;
-
-static struct clk_hw_omap timer4_fck_hw = {
-	.hw	= {
-		.clk	= &timer4_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER4_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer4_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer5_fck;
-
-static struct clk_hw_omap timer5_fck_hw = {
-	.hw	= {
-		.clk	= &timer5_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER5_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer5_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer6_fck;
-
-static struct clk_hw_omap timer6_fck_hw = {
-	.hw	= {
-		.clk	= &timer6_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER6_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer6_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-static struct clk timer7_fck;
-
-static struct clk_hw_omap timer7_fck_hw = {
-	.hw	= {
-		.clk	= &timer7_fck,
-	},
-	.clkdm_name	= "l4ls_clkdm",
-	.clksel		= timer2_to_7_clk_sel,
-	.clksel_reg	= AM33XX_CLKSEL_TIMER7_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(timer7_fck, timer2_to_7_ck_parents, timer1_fck_ops);
-
-DEFINE_CLK_FIXED_FACTOR(cpsw_125mhz_gclk,
-			"dpll_core_m5_ck",
-			&dpll_core_m5_ck,
-			0x0,
-			1, 2);
-
-static const struct clk_ops cpsw_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-};
-
-static const struct clksel cpsw_cpts_rft_clkmux_sel[] = {
-	{ .parent = &dpll_core_m5_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m4_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static const char *cpsw_cpts_rft_ck_parents[] = {
-	"dpll_core_m5_ck", "dpll_core_m4_ck",
-};
-
-static struct clk cpsw_cpts_rft_clk;
-
-static struct clk_hw_omap cpsw_cpts_rft_clk_hw = {
-	.hw	= {
-		.clk	= &cpsw_cpts_rft_clk,
-	},
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.clksel		= cpsw_cpts_rft_clkmux_sel,
-	.clksel_reg	= AM33XX_CM_CPTS_RFT_CLKSEL,
-	.clksel_mask	= AM33XX_CLKSEL_0_0_MASK,
-};
-
-DEFINE_STRUCT_CLK(cpsw_cpts_rft_clk, cpsw_cpts_rft_ck_parents, cpsw_fck_ops);
-
-
-/* gpio */
-static const char *gpio0_ck_parents[] = {
-	"clk_rc32k_ck", "clk_32768_ck", "clkdiv32k_ick",
-};
-
-static const struct clksel gpio0_dbclk_mux_sel[] = {
-	{ .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
-	{ .parent = &clk_32768_ck, .rates = div_1_1_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const struct clk_ops gpio_fck_ops = {
-	.recalc_rate	= &omap2_clksel_recalc,
-	.get_parent	= &omap2_clksel_find_parent_index,
-	.set_parent	= &omap2_clksel_set_parent,
-	.init		= &omap2_init_clk_clkdm,
-};
-
-static struct clk gpio0_dbclk_mux_ck;
-
-static struct clk_hw_omap gpio0_dbclk_mux_ck_hw = {
-	.hw	= {
-		.clk	= &gpio0_dbclk_mux_ck,
-	},
-	.clkdm_name	= "l4_wkup_clkdm",
-	.clksel		= gpio0_dbclk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_GPIO0_DBCLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(gpio0_dbclk_mux_ck, gpio0_ck_parents, gpio_fck_ops);
-
-DEFINE_CLK_GATE(gpio0_dbclk, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, 0x0,
-		AM33XX_CM_WKUP_GPIO0_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio1_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO1_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio2_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO2_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(gpio3_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
-		AM33XX_CM_PER_GPIO3_CLKCTRL,
-		AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT, 0x0, NULL);
-
-
-static const char *pruss_ck_parents[] = {
-	"l3_gclk", "dpll_disp_m2_ck",
-};
-
-static const struct clksel pruss_ocp_clk_mux_sel[] = {
-	{ .parent = &l3_gclk, .rates = div_1_0_rates },
-	{ .parent = &dpll_disp_m2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pruss_ocp_gclk;
-
-static struct clk_hw_omap pruss_ocp_gclk_hw = {
-	.hw	= {
-		.clk	= &pruss_ocp_gclk,
-	},
-	.clkdm_name	= "pruss_ocp_clkdm",
-	.clksel		= pruss_ocp_clk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_PRUSS_OCP_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_0_MASK,
-};
-
-DEFINE_STRUCT_CLK(pruss_ocp_gclk, pruss_ck_parents, gpio_fck_ops);
-
-static const char *lcd_ck_parents[] = {
-	"dpll_disp_m2_ck", "dpll_core_m5_ck", "dpll_per_m2_ck",
-};
-
-static const struct clksel lcd_clk_mux_sel[] = {
-	{ .parent = &dpll_disp_m2_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m5_ck, .rates = div_1_1_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk lcd_gclk;
-
-static struct clk_hw_omap lcd_gclk_hw = {
-	.hw	= {
-		.clk	= &lcd_gclk,
-	},
-	.clkdm_name	= "lcdc_clkdm",
-	.clksel		= lcd_clk_mux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_LCDC_PIXEL_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK_FLAGS(lcd_gclk, lcd_ck_parents,
-			gpio_fck_ops, CLK_SET_RATE_PARENT);
-
-DEFINE_CLK_FIXED_FACTOR(mmc_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1, 2);
-
-static const char *gfx_ck_parents[] = {
-	"dpll_core_m4_ck", "dpll_per_m2_ck",
-};
-
-static const struct clksel gfx_clksel_sel[] = {
-	{ .parent = &dpll_core_m4_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk gfx_fclk_clksel_ck;
-
-static struct clk_hw_omap gfx_fclk_clksel_ck_hw = {
-	.hw	= {
-		.clk	= &gfx_fclk_clksel_ck,
-	},
-	.clksel		= gfx_clksel_sel,
-	.clksel_reg	= AM33XX_CLKSEL_GFX_FCLK,
-	.clksel_mask	= AM33XX_CLKSEL_GFX_FCLK_MASK,
-};
-
-DEFINE_STRUCT_CLK(gfx_fclk_clksel_ck, gfx_ck_parents, gpio_fck_ops);
-
-static const struct clk_div_table div_1_0_2_1_rates[] = {
-	{ .div = 1, .val = 0, },
-	{ .div = 2, .val = 1, },
-	{ .div = 0 },
-};
-
-DEFINE_CLK_DIVIDER_TABLE(gfx_fck_div_ck, "gfx_fclk_clksel_ck",
-			 &gfx_fclk_clksel_ck, 0x0, AM33XX_CLKSEL_GFX_FCLK,
-			 AM33XX_CLKSEL_0_0_SHIFT, AM33XX_CLKSEL_0_0_WIDTH,
-			 0x0, div_1_0_2_1_rates, NULL);
-
-static const char *sysclkout_ck_parents[] = {
-	"clk_32768_ck", "l3_gclk", "dpll_ddr_m2_ck", "dpll_per_m2_ck",
-	"lcd_gclk",
-};
-
-static const struct clksel sysclkout_pre_sel[] = {
-	{ .parent = &clk_32768_ck, .rates = div_1_0_rates },
-	{ .parent = &l3_gclk, .rates = div_1_1_rates },
-	{ .parent = &dpll_ddr_m2_ck, .rates = div_1_2_rates },
-	{ .parent = &dpll_per_m2_ck, .rates = div_1_3_rates },
-	{ .parent = &lcd_gclk, .rates = div_1_4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sysclkout_pre_ck;
-
-static struct clk_hw_omap sysclkout_pre_ck_hw = {
-	.hw	= {
-		.clk	= &sysclkout_pre_ck,
-	},
-	.clksel		= sysclkout_pre_sel,
-	.clksel_reg	= AM33XX_CM_CLKOUT_CTRL,
-	.clksel_mask	= AM33XX_CLKOUT2SOURCE_MASK,
-};
-
-DEFINE_STRUCT_CLK(sysclkout_pre_ck, sysclkout_ck_parents, gpio_fck_ops);
-
-/* Divide by 8 clock rates with default clock is 1/1*/
-static const struct clk_div_table div8_rates[] = {
-	{ .div = 1, .val = 0, },
-	{ .div = 2, .val = 1, },
-	{ .div = 3, .val = 2, },
-	{ .div = 4, .val = 3, },
-	{ .div = 5, .val = 4, },
-	{ .div = 6, .val = 5, },
-	{ .div = 7, .val = 6, },
-	{ .div = 8, .val = 7, },
-	{ .div = 0 },
-};
-
-DEFINE_CLK_DIVIDER_TABLE(clkout2_div_ck, "sysclkout_pre_ck", &sysclkout_pre_ck,
-			 0x0, AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2DIV_SHIFT,
-			 AM33XX_CLKOUT2DIV_WIDTH, 0x0, div8_rates, NULL);
-
-DEFINE_CLK_GATE(clkout2_ck, "clkout2_div_ck", &clkout2_div_ck, 0x0,
-		AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2EN_SHIFT, 0x0, NULL);
-
-static const char *wdt_ck_parents[] = {
-	"clk_rc32k_ck", "clkdiv32k_ick",
-};
-
-static const struct clksel wdt_clkmux_sel[] = {
-	{ .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
-	{ .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk wdt1_fck;
-
-static struct clk_hw_omap wdt1_fck_hw = {
-	.hw	= {
-		.clk	= &wdt1_fck,
-	},
-	.clkdm_name	= "l4_wkup_clkdm",
-	.clksel		= wdt_clkmux_sel,
-	.clksel_reg	= AM33XX_CLKSEL_WDT1_CLK,
-	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
-};
-
-DEFINE_STRUCT_CLK(wdt1_fck, wdt_ck_parents, gpio_fck_ops);
-
-static const char *pwmss_clk_parents[] = {
-	"dpll_per_m2_ck",
-};
-
-static const struct clk_ops ehrpwm_tbclk_ops = {
-	.enable		= &omap2_dflt_clk_enable,
-	.disable	= &omap2_dflt_clk_disable,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm0_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS0_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm1_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS1_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm2_tbclk, "l4ls_clkdm",
-			 NULL, NULL, 0,
-			 AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL),
-			 AM33XX_PWMSS2_TBCLKEN_SHIFT,
-			 NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
-
-/*
- * debugss optional clocks
- */
-DEFINE_CLK_GATE(dbg_sysclk_ck, "sys_clkin_ck", &sys_clkin_ck,
-		0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT, 0x0, NULL);
-
-DEFINE_CLK_GATE(dbg_clka_ck, "dpll_core_m4_ck", &dpll_core_m4_ck,
-		0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		AM33XX_OPTCLK_DEBUG_CLKA_SHIFT, 0x0, NULL);
-
-static const char *stm_pmd_clock_mux_ck_parents[] = {
-	"dbg_sysclk_ck", "dbg_clka_ck",
-};
-
-DEFINE_CLK_MUX(stm_pmd_clock_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
-	       AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_STM_PMD_CLKSEL_SHIFT,
-	       AM33XX_STM_PMD_CLKSEL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_MUX(trace_pmd_clk_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
-	       AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-	       AM33XX_TRC_PMD_CLKSEL_SHIFT,
-	       AM33XX_TRC_PMD_CLKSEL_WIDTH, 0x0, NULL);
-
-DEFINE_CLK_DIVIDER(stm_clk_div_ck, "stm_pmd_clock_mux_ck",
-		   &stm_pmd_clock_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		   AM33XX_STM_PMD_CLKDIVSEL_SHIFT,
-		   AM33XX_STM_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-DEFINE_CLK_DIVIDER(trace_clk_div_ck, "trace_pmd_clk_mux_ck",
-		   &trace_pmd_clk_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
-		   AM33XX_TRC_PMD_CLKDIVSEL_SHIFT,
-		   AM33XX_TRC_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
-		   NULL);
-
-/*
- * clkdev
- */
-static struct omap_clk am33xx_clks[] = {
-	CLK(NULL,	"clk_32768_ck",		&clk_32768_ck),
-	CLK(NULL,	"clk_rc32k_ck",		&clk_rc32k_ck),
-	CLK(NULL,	"virt_19200000_ck",	&virt_19200000_ck),
-	CLK(NULL,	"virt_24000000_ck",	&virt_24000000_ck),
-	CLK(NULL,	"virt_25000000_ck",	&virt_25000000_ck),
-	CLK(NULL,	"virt_26000000_ck",	&virt_26000000_ck),
-	CLK(NULL,	"sys_clkin_ck",		&sys_clkin_ck),
-	CLK(NULL,	"tclkin_ck",		&tclkin_ck),
-	CLK(NULL,	"dpll_core_ck",		&dpll_core_ck),
-	CLK(NULL,	"dpll_core_x2_ck",	&dpll_core_x2_ck),
-	CLK(NULL,	"dpll_core_m4_ck",	&dpll_core_m4_ck),
-	CLK(NULL,	"dpll_core_m5_ck",	&dpll_core_m5_ck),
-	CLK(NULL,	"dpll_core_m6_ck",	&dpll_core_m6_ck),
-	CLK(NULL,	"dpll_mpu_ck",		&dpll_mpu_ck),
-	CLK("cpu0",	NULL,			&dpll_mpu_ck),
-	CLK(NULL,	"dpll_mpu_m2_ck",	&dpll_mpu_m2_ck),
-	CLK(NULL,	"dpll_ddr_ck",		&dpll_ddr_ck),
-	CLK(NULL,	"dpll_ddr_m2_ck",	&dpll_ddr_m2_ck),
-	CLK(NULL,	"dpll_ddr_m2_div2_ck",	&dpll_ddr_m2_div2_ck),
-	CLK(NULL,	"dpll_disp_ck",		&dpll_disp_ck),
-	CLK(NULL,	"dpll_disp_m2_ck",	&dpll_disp_m2_ck),
-	CLK(NULL,	"dpll_per_ck",		&dpll_per_ck),
-	CLK(NULL,	"dpll_per_m2_ck",	&dpll_per_m2_ck),
-	CLK(NULL,	"dpll_per_m2_div4_wkupdm_ck",	&dpll_per_m2_div4_wkupdm_ck),
-	CLK(NULL,	"dpll_per_m2_div4_ck",	&dpll_per_m2_div4_ck),
-	CLK(NULL,	"adc_tsc_fck",		&adc_tsc_fck),
-	CLK(NULL,	"cefuse_fck",		&cefuse_fck),
-	CLK(NULL,	"clkdiv32k_ck",		&clkdiv32k_ck),
-	CLK(NULL,	"clkdiv32k_ick",	&clkdiv32k_ick),
-	CLK(NULL,	"dcan0_fck",		&dcan0_fck),
-	CLK("481cc000.d_can",	NULL,		&dcan0_fck),
-	CLK(NULL,	"dcan1_fck",		&dcan1_fck),
-	CLK("481d0000.d_can",	NULL,		&dcan1_fck),
-	CLK(NULL,	"pruss_ocp_gclk",	&pruss_ocp_gclk),
-	CLK(NULL,	"mcasp0_fck",		&mcasp0_fck),
-	CLK(NULL,	"mcasp1_fck",		&mcasp1_fck),
-	CLK(NULL,	"mmu_fck",		&mmu_fck),
-	CLK(NULL,	"smartreflex0_fck",	&smartreflex0_fck),
-	CLK(NULL,	"smartreflex1_fck",	&smartreflex1_fck),
-	CLK(NULL,	"sha0_fck",		&sha0_fck),
-	CLK(NULL,	"aes0_fck",		&aes0_fck),
-	CLK(NULL,	"rng_fck",		&rng_fck),
-	CLK(NULL,	"timer1_fck",		&timer1_fck),
-	CLK(NULL,	"timer2_fck",		&timer2_fck),
-	CLK(NULL,	"timer3_fck",		&timer3_fck),
-	CLK(NULL,	"timer4_fck",		&timer4_fck),
-	CLK(NULL,	"timer5_fck",		&timer5_fck),
-	CLK(NULL,	"timer6_fck",		&timer6_fck),
-	CLK(NULL,	"timer7_fck",		&timer7_fck),
-	CLK(NULL,	"usbotg_fck",		&usbotg_fck),
-	CLK(NULL,	"ieee5000_fck",		&ieee5000_fck),
-	CLK(NULL,	"wdt1_fck",		&wdt1_fck),
-	CLK(NULL,	"l4_rtc_gclk",		&l4_rtc_gclk),
-	CLK(NULL,	"l3_gclk",		&l3_gclk),
-	CLK(NULL,	"dpll_core_m4_div2_ck",	&dpll_core_m4_div2_ck),
-	CLK(NULL,	"l4hs_gclk",		&l4hs_gclk),
-	CLK(NULL,	"l3s_gclk",		&l3s_gclk),
-	CLK(NULL,	"l4fw_gclk",		&l4fw_gclk),
-	CLK(NULL,	"l4ls_gclk",		&l4ls_gclk),
-	CLK(NULL,	"clk_24mhz",		&clk_24mhz),
-	CLK(NULL,	"sysclk_div_ck",	&sysclk_div_ck),
-	CLK(NULL,	"cpsw_125mhz_gclk",	&cpsw_125mhz_gclk),
-	CLK(NULL,	"cpsw_cpts_rft_clk",	&cpsw_cpts_rft_clk),
-	CLK(NULL,	"gpio0_dbclk_mux_ck",	&gpio0_dbclk_mux_ck),
-	CLK(NULL,	"gpio0_dbclk",		&gpio0_dbclk),
-	CLK(NULL,	"gpio1_dbclk",		&gpio1_dbclk),
-	CLK(NULL,	"gpio2_dbclk",		&gpio2_dbclk),
-	CLK(NULL,	"gpio3_dbclk",		&gpio3_dbclk),
-	CLK(NULL,	"lcd_gclk",		&lcd_gclk),
-	CLK(NULL,	"mmc_clk",		&mmc_clk),
-	CLK(NULL,	"gfx_fclk_clksel_ck",	&gfx_fclk_clksel_ck),
-	CLK(NULL,	"gfx_fck_div_ck",	&gfx_fck_div_ck),
-	CLK(NULL,	"sysclkout_pre_ck",	&sysclkout_pre_ck),
-	CLK(NULL,	"clkout2_div_ck",	&clkout2_div_ck),
-	CLK(NULL,	"timer_32k_ck",		&clkdiv32k_ick),
-	CLK(NULL,	"timer_sys_ck",		&sys_clkin_ck),
-	CLK(NULL,	"dbg_sysclk_ck",	&dbg_sysclk_ck),
-	CLK(NULL,	"dbg_clka_ck",		&dbg_clka_ck),
-	CLK(NULL,	"stm_pmd_clock_mux_ck",	&stm_pmd_clock_mux_ck),
-	CLK(NULL,	"trace_pmd_clk_mux_ck",	&trace_pmd_clk_mux_ck),
-	CLK(NULL,	"stm_clk_div_ck",	&stm_clk_div_ck),
-	CLK(NULL,	"trace_clk_div_ck",	&trace_clk_div_ck),
-	CLK(NULL,	"clkout2_ck",		&clkout2_ck),
-	CLK("48300200.ehrpwm",	"tbclk",	&ehrpwm0_tbclk),
-	CLK("48302200.ehrpwm",	"tbclk",	&ehrpwm1_tbclk),
-	CLK("48304200.ehrpwm",	"tbclk",	&ehrpwm2_tbclk),
-};
-
-
-static const char *enable_init_clks[] = {
-	"dpll_ddr_m2_ck",
-	"dpll_mpu_m2_ck",
-	"l3_gclk",
-	"l4hs_gclk",
-	"l4fw_gclk",
-	"l4ls_gclk",
-	"clkout2_ck",	/* Required for external peripherals like, Audio codecs */
-};
-
-int __init am33xx_clk_init(void)
-{
-	if (soc_is_am33xx())
-		cpu_mask = RATE_IN_AM33XX;
-
-	omap_clocks_register(am33xx_clks, ARRAY_SIZE(am33xx_clks));
-
-	omap2_clk_disable_autoidle_all();
-
-	omap2_clk_enable_init_clocks(enable_init_clks,
-				     ARRAY_SIZE(enable_init_clks));
-
-	/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always
-	 *    physically present, in such a case HWMOD enabling of
-	 *    clock would be failure with default parent. And timer
-	 *    probe thinks clock is already enabled, this leads to
-	 *    crash upon accessing timer 3 & 6 registers in probe.
-	 *    Fix by setting parent of both these timers to master
-	 *    oscillator clock.
-	 */
-
-	clk_set_parent(&timer3_fck, &sys_clkin_ck);
-	clk_set_parent(&timer6_fck, &sys_clkin_ck);
-	/*
-	 * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
-	 * the design/spec, so as a result, for example, timer which supposed
-	 * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
-	 * not expected by any use-case, so change WDT1 clock source to PRCM
-	 * 32KHz clock.
-	 */
-	clk_set_parent(&wdt1_fck, &clkdiv32k_ick);
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index bbd2959..f28399f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -581,7 +581,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_soc_init = am33xx_clk_init;
+	omap_clk_soc_init = am33xx_dt_clk_init;
 }
 
 void __init am33xx_init_late(void)
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-01-09 14:00 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-09 14:00 [PATCHv13 00/40] ARM: TI SoC clock DT conversion Tero Kristo
2014-01-09 14:00 ` [PATCHv13 01/40] CLK: TI: add DT alias clock registration mechanism Tero Kristo
2014-01-09 14:00 ` [PATCHv13 02/40] CLK: ti: add init support for clock IP blocks Tero Kristo
2014-01-09 14:00 ` [PATCHv13 03/40] CLK: TI: Add DPLL clock support Tero Kristo
2014-01-09 14:00 ` [PATCHv13 04/40] CLK: TI: add autoidle support Tero Kristo
2014-01-09 14:00 ` [PATCHv13 05/40] clk: ti: add composite clock support Tero Kristo
2014-01-09 14:00 ` [PATCHv13 06/40] CLK: ti: add support for ti divider-clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 07/40] clk: ti: add support for TI fixed factor clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 09/40] CLK: TI: add support for clockdomain binding Tero Kristo
2014-01-09 14:00 ` [PATCHv13 10/40] clk: ti: add support for basic mux clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 11/40] CLK: TI: add omap4 clock init file Tero Kristo
2014-01-09 14:00 ` [PATCHv13 12/40] CLK: TI: add omap5 " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 15/40] CLK: TI: add dra7 " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 16/40] CLK: TI: add am33xx " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 18/40] CLK: TI: add omap3 " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 20/40] ARM: dts: omap4 clock data Tero Kristo
     [not found] ` <1389276051-1326-1-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org>
2014-01-09 14:00   ` [PATCHv13 08/40] CLK: TI: add support for gate clock Tero Kristo
2014-01-09 14:00   ` [PATCHv13 13/40] CLK: TI: omap5: Initialize USB_DPLL at boot Tero Kristo
2014-01-09 14:00   ` [PATCHv13 14/40] CLK: TI: DRA7: Add APLL support Tero Kristo
2014-01-09 14:00   ` [PATCHv13 17/40] CLK: TI: add interface clock support for OMAP3 Tero Kristo
2014-01-09 14:00   ` [PATCHv13 19/40] CLK: TI: add am43xx clock init file Tero Kristo
2014-01-09 14:00   ` [PATCHv13 21/40] ARM: dts: omap5 clock data Tero Kristo
2014-01-09 14:00   ` [PATCHv13 26/40] ARM: dts: am33xx " Tero Kristo
2014-01-09 14:00   ` [PATCHv13 27/40] ARM: dts: omap3 " Tero Kristo
2014-01-20 18:00     ` Sebastian Reichel
2014-01-21  7:42       ` Tero Kristo
2014-01-21 14:37         ` [PATCH] ARM: dts: omap3 clocks: simplify ssi aliases Sebastian Reichel
2014-02-13 22:49           ` Tony Lindgren
2014-02-14  1:25             ` Sebastian Reichel
2014-02-14 13:47               ` Tero Kristo
2014-02-28 22:03                 ` Tony Lindgren
2014-01-09 14:00   ` [PATCHv13 28/40] ARM: dts: AM35xx: use DT clock data Tero Kristo
2014-01-09 14:00   ` [PATCHv13 29/40] ARM: dts: am43xx " Tero Kristo
2014-01-09 14:00   ` [PATCHv13 30/40] ARM: OMAP2+: clock: add support for indexed memmaps Tero Kristo
2014-01-09 14:00   ` [PATCHv13 33/40] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name Tero Kristo
2014-01-09 14:00   ` [PATCHv13 35/40] ARM: OMAP2+: io: use new clock init API Tero Kristo
2014-01-09 14:00   ` [PATCHv13 36/40] ARM: OMAP4: remove old clock data and link in new clock init code Tero Kristo
2014-01-09 14:00   ` [PATCHv13 37/40] ARM: OMAP: DRA7: Enable clock init Tero Kristo
2014-01-09 14:00   ` [PATCHv13 38/40] ARM: AM43xx: " Tero Kristo
2014-01-09 14:00   ` Tero Kristo [this message]
2014-01-09 14:00   ` [PATCHv13 40/40] ARM: OMAP3: use DT clock init if DT data is available Tero Kristo
2014-01-09 22:23   ` [PATCHv13 00/40] ARM: TI SoC clock DT conversion Mike Turquette
2014-01-10 18:53     ` Tony Lindgren
2014-01-11  9:54       ` Tero Kristo
2014-01-12  0:36         ` Tony Lindgren
2014-01-09 14:00 ` [PATCHv13 22/40] ARM: dts: dra7 clock data Tero Kristo
2014-01-09 14:00 ` [PATCHv13 23/40] ARM: dts: clk: Add apll related clocks Tero Kristo
2014-01-09 14:00 ` [PATCHv13 24/40] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 25/40] ARM: dts: DRA7: Add PCIe related clock nodes Tero Kristo
2014-01-09 14:00 ` [PATCHv13 31/40] ARM: OMAP2+: clock: use driver API instead of direct memory read/write Tero Kristo
2014-01-09 14:00 ` [PATCHv13 32/40] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm Tero Kristo
2014-01-09 14:00 ` [PATCHv13 34/40] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT Tero Kristo
2014-01-09 17:22 ` [PATCHv13 00/40] ARM: TI SoC clock DT conversion Felipe Balbi
2014-01-09 18:40   ` Felipe Balbi
2014-01-09 18:43     ` Felipe Balbi
2014-01-09 21:22 ` Nishanth Menon
2014-01-09 23:15   ` Felipe Balbi
2014-01-10  9:52     ` Tero Kristo
2014-01-10 16:13       ` Felipe Balbi
2014-01-10 16:30         ` Tero Kristo
2014-01-10 18:51           ` Tony Lindgren
2014-01-14 12:41             ` Tero Kristo
2014-01-14 20:36               ` Felipe Balbi
2014-01-15  2:04                 ` Felipe Balbi
2014-01-15  3:16                   ` Mike Turquette
2014-01-15  3:50                     ` Mike Turquette
2014-01-15 13:41                       ` Tero Kristo
2014-01-15 15:59                         ` Nishanth Menon
2014-01-15 17:13                       ` Tony Lindgren
2014-01-15 19:23                         ` Mike Turquette
2014-01-15 19:35                           ` Tony Lindgren
2014-01-16 21:39                             ` Mike Turquette
2014-01-16 23:05                               ` Nishanth Menon
2014-01-17 17:46                               ` Kevin Hilman
2014-01-17 17:53                                 ` Tony Lindgren
2014-01-17 18:11                                   ` Tero Kristo
2014-01-17 20:58                                     ` Mike Turquette
2014-01-18  0:02                                       ` Nishanth Menon
2014-01-18  0:12                                         ` Olof Johansson
2014-01-18  0:19                                           ` Nishanth Menon
2014-01-18  0:23                                             ` Olof Johansson
2014-01-18  1:20                                               ` Nishanth Menon
2014-01-18 18:11                                                 ` Sebastian Reichel
2014-01-20 17:36                                                 ` Nishanth Menon
2014-01-18 18:07                                       ` Tony Lindgren
2014-01-17 20:02                                 ` Nishanth Menon
2014-01-11 16:35 ` Joachim Eastwood
2014-01-13 15:49   ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389276051-1326-40-git-send-email-t-kristo@ti.com \
    --to=t-kristo-l0cymroini0@public.gmane.org \
    --cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=nm-l0cyMroinI0@public.gmane.org \
    --cc=paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org \
    --cc=rnayak-l0cyMroinI0@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).