[PATCHv9 1/4] clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk"

[<dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>]

From: Dinh Nguyen <dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>

The clk-phase property is used to represent the 2 clock phase values that is
needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will
use the syscon driver to set sdmmc_clk's phase shift that is located in the
system manager.

Signed-off-by: Dinh Nguyen <dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
Acked-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
v9: none
v8: Use degrees in the clk-phase binding property
v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a
    prepare function to the gate clk that will toggle clock phase setting.
    Remove the "altr,socfpga-sdmmc-sdr-clk" clock type.
v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to
    set the phase shift settings.
v5: Use the "snps,dw-mshc" binding
v4: Use the sdmmc_clk prepare function to set the phase shift settings
v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is
    loaded after the clock driver.
v2: Use the syscon driver
---
 .../devicetree/bindings/clock/altr_socfpga.txt     |    5 ++
 arch/arm/boot/dts/socfpga.dtsi                     |    1 +
 drivers/clk/socfpga/clk-gate.c                     |   68 ++++++++++++++++++++
 3 files changed, 74 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
index 0045433..5dfd145 100644
--- a/Documentation/devicetree/bindings/clock/altr_socfpga.txt
+++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
@@ -23,3 +23,8 @@ Optional properties:
         and the bit index.
 - div-reg : For "socfpga-gate-clk", div-reg contains the divider register, bit shift,
         and width.
+- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
+	the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
+	value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
+	hold/delay times that is needed for the SD/MMC CIU clock. The values of both
+	can be 0-315 degrees, in 45 degree increments.
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index f936476..e776512 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -413,6 +413,7 @@
 						compatible = "altr,socfpga-gate-clk";
 						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
 						clk-gate = <0xa0 8>;
+						clk-phase = <0 135>;
 					};
 
 					nand_x_clk: nand_x_clk {
diff --git a/drivers/clk/socfpga/clk-gate.c b/drivers/clk/socfpga/clk-gate.c
index 4efcf4e..501d513 100644
--- a/drivers/clk/socfpga/clk-gate.c
+++ b/drivers/clk/socfpga/clk-gate.c
@@ -19,7 +19,9 @@
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/io.h>
+#include <linux/mfd/syscon.h>
 #include <linux/of.h>
+#include <linux/regmap.h>
 
 #include "clk.h"
 
@@ -35,6 +37,11 @@
 
 #define to_socfpga_gate_clk(p) container_of(p, struct socfpga_gate_clk, hw.hw)
 
+/* SDMMC Group for System Manager defines */
+#define SYSMGR_SDMMCGRP_CTRL_OFFSET    0x108
+#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
+	((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0))
+
 static u8 socfpga_clk_get_parent(struct clk_hw *hwclk)
 {
 	u32 l4_src;
@@ -115,7 +122,61 @@ static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk,
 	return parent_rate / div;
 }
 
+static int socfpga_clk_prepare(struct clk_hw *hwclk)
+{
+	struct socfpga_gate_clk *socfpgaclk = to_socfpga_gate_clk(hwclk);
+	struct regmap *sys_mgr_base_addr;
+	int i;
+	u32 hs_timing;
+	u32 clk_phase[2];
+
+	if (socfpgaclk->clk_phase[0] || socfpgaclk->clk_phase[1]) {
+		sys_mgr_base_addr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
+		if (IS_ERR(sys_mgr_base_addr)) {
+			pr_err("%s: failed to find altr,sys-mgr regmap!\n", __func__);
+			return -EINVAL;
+		}
+
+		for (i = 0; i < 2; i++) {
+			switch (socfpgaclk->clk_phase[i]) {
+			case 0:
+				clk_phase[i] = 0;
+				break;
+			case 45:
+				clk_phase[i] = 1;
+				break;
+			case 90:
+				clk_phase[i] = 2;
+				break;
+			case 135:
+				clk_phase[i] = 3;
+				break;
+			case 180:
+				clk_phase[i] = 4;
+				break;
+			case 225:
+				clk_phase[i] = 5;
+				break;
+			case 270:
+				clk_phase[i] = 6;
+				break;
+			case 315:
+				clk_phase[i] = 7;
+				break;
+			default:
+				clk_phase[i] = 0;
+				break;
+			}
+		}
+		hs_timing = SYSMGR_SDMMC_CTRL_SET(clk_phase[0], clk_phase[1]);
+		regmap_write(sys_mgr_base_addr, SYSMGR_SDMMCGRP_CTRL_OFFSET,
+			hs_timing);
+	}
+	return 0;
+}
+
 static struct clk_ops gateclk_ops = {
+	.prepare = socfpga_clk_prepare,
 	.recalc_rate = socfpga_clk_recalc_rate,
 	.get_parent = socfpga_clk_get_parent,
 	.set_parent = socfpga_clk_set_parent,
@@ -126,6 +187,7 @@ static void __init __socfpga_gate_init(struct device_node *node,
 {
 	u32 clk_gate[2];
 	u32 div_reg[3];
+	u32 clk_phase[2];
 	u32 fixed_div;
 	struct clk *clk;
 	struct socfpga_gate_clk *socfpga_clk;
@@ -166,6 +228,12 @@ static void __init __socfpga_gate_init(struct device_node *node,
 		socfpga_clk->div_reg = 0;
 	}
 
+	rc = of_property_read_u32_array(node, "clk-phase", clk_phase, 2);
+	if (!rc) {
+		socfpga_clk->clk_phase[0] = clk_phase[0];
+		socfpga_clk->clk_phase[1] = clk_phase[1];
+	}
+
 	of_property_read_string(node, "clock-output-names", &clk_name);
 
 	init.name = clk_name;
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html