[PATCH V4 6/6] ARM: imx: add suspend in ocram support on i.mx6sl

[Anson Huang <b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org>]

i.MX6SL's suspend in ocram function is derived from i.MX6Q,
the only difference is the offset of DDR IO pins. It can
lower the DDR IO power from ~10mA@1.2V to ~1mA@1.2V,
measured on i.MX6SL EVK board, SH5.

Signed-off-by: Anson Huang <b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 arch/arm/mach-imx/Makefile       |    2 +-
 arch/arm/mach-imx/pm-imx6q.c     |   12 +++++++
 arch/arm/mach-imx/suspend-imx6.S |   74 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 87 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 3d96a45..f2df89f 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -105,7 +105,7 @@ ifeq ($(CONFIG_PM),y)
 AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o suspend-imx6.o
 # i.MX6SL reuses i.MX6Q code
-obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
+obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o suspend-imx6.o
 endif
 
 # i.MX5 based machines
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index 826bf8a..175b229 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -112,6 +112,14 @@ static const u32 imx6dl_mmdc_io_dsm_offset[] __initconst = {
 	0x74c			    /* GPR_ADDS */
 };
 
+static const u32 imx6sl_mmdc_io_dsm_offset[] __initconst = {
+	0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */
+	0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */
+	0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */
+	0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, DDRMODE_CTL, DDRMODE */
+	0x330, 0x334, 0x320,	    /* SDCKE0, SDCKE1, RESET */
+};
+
 /*
  * This structure is for passing necessary data for low level ocram
  * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
@@ -429,6 +437,10 @@ static int __init imx6q_ocram_suspend_init(void)
 		pm_info->cpu_type = MXC_CPU_IMX6DL;
 		pm_info->mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_dsm_offset);
 		mmdc_offset_array = imx6dl_mmdc_io_dsm_offset;
+	} else if (cpu_is_imx6sl()) {
+		pm_info->cpu_type = MXC_CPU_IMX6SL;
+		pm_info->mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_dsm_offset);
+		mmdc_offset_array = imx6sl_mmdc_io_dsm_offset;
 	}
 
 	if (!mmdc_offset_array) {
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index 0800033..bc0d566 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -64,6 +64,7 @@
 #define MX6Q_SRC_GPR1	0x20
 #define MX6Q_SRC_GPR2	0x24
 #define MX6Q_MMDC_MAPSR	0x404
+#define MX6Q_MMDC_MPDGCTRL0	0x83c
 #define MX6Q_GPC_IMR1	0x08
 #define MX6Q_GPC_IMR2	0x0c
 #define MX6Q_GPC_IMR3	0x10
@@ -140,10 +141,15 @@ poll_dvfs_set_1:
 	ands	r7, r7, #(1 << 25)
 	beq	poll_dvfs_set_1
 
+	ldr	r10, [r0, #PM_INFO_CPU_TYPE_OFFSET]
 	ldr	r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
 	ldr	r6, =0x0
 	ldr	r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
 	ldr	r8, =PM_INFO_MMDC_IO_VAL_OFFSET
+	/* i.MX6SL's last 3 IOs need special setting */
+	cmp 	r10, #MXC_CPU_IMX6SL
+	bne	set_mmdc_io_lpm
+	sub	r7, r7, #0x3
 set_mmdc_io_lpm:
 	ldr	r9, [r0, r8]
 	str	r6, [r11, r9]
@@ -152,6 +158,20 @@ set_mmdc_io_lpm:
 	cmp     r7, #0x0
 	bne	set_mmdc_io_lpm
 
+	cmp 	r10, #MXC_CPU_IMX6SL
+	bne	set_mmdc_io_lpm_done
+	ldr	r6, =0x1000
+	ldr	r9, [r0, r8]
+	str	r6, [r11, r9]
+	add	r8, r8, #0x8
+	ldr	r9, [r0, r8]
+	str	r6, [r11, r9]
+	add	r8, r8, #0x8
+	ldr	r6, =0x80000
+	ldr	r9, [r0, r8]
+	str	r6, [r11, r9]
+set_mmdc_io_lpm_done:
+
 	/*
 	 * mask all GPC interrupts before
 	 * enabling the RBC counters to
@@ -236,6 +256,33 @@ restore_mmdc_io:
 	cmp     r6, #0x0
 	bne	restore_mmdc_io
 
+	ldr	r6, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+	cmp 	r6, #MXC_CPU_IMX6SL
+	bne	restore_mmdc_io_done
+
+	ldr	r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
+	/* reset read FIFO, RST_RD_FIFO */
+	ldr	r7, =MX6Q_MMDC_MPDGCTRL0
+	ldr	r6, [r11, r7]
+	orr     r6, r6, #(1 << 31)
+	str	r6, [r11, r7]
+fifo_reset1_wait:
+	ldr	r6, [r11, r7]
+	and	r6, r6, #(1 << 31)
+	cmp	r6, #0
+	bne	fifo_reset1_wait
+
+	/* reset FIFO a second time */
+	ldr	r6, [r11, r7]
+	orr     r6, r6, #(1 << 31)
+	str	r6, [r11, r7]
+fifo_reset2_wait:
+	ldr	r6, [r11, r7]
+	and	r6, r6, #(1 << 31)
+	cmp	r6, #0
+	bne	fifo_reset2_wait
+restore_mmdc_io_done:
+
 	ldr	r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
 	/* let DDR out of self-refresh. */
 	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
@@ -285,6 +332,33 @@ dsm_restore_mmdc_io:
 	cmp     r6, #0x0
 	bne	dsm_restore_mmdc_io
 
+	ldr	r6, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+	cmp 	r6, #MXC_CPU_IMX6SL
+	bne	dsm_restore_mmdc_io_done
+
+	ldr	r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
+	/* reset read FIFO, RST_RD_FIFO */
+	ldr	r7, =MX6Q_MMDC_MPDGCTRL0
+	ldr	r6, [r11, r7]
+	orr     r6, r6, #(1 << 31)
+	str	r6, [r11, r7]
+dsm_fifo_reset1_wait:
+	ldr	r6, [r11, r7]
+	and	r6, r6, #(1 << 31)
+	cmp	r6, #0
+	bne	dsm_fifo_reset1_wait
+
+	/* reset FIFO a second time */
+	ldr	r6, [r11, r7]
+	orr     r6, r6, #(1 << 31)
+	str	r6, [r11, r7]
+dsm_fifo_reset2_wait:
+	ldr	r6, [r11, r7]
+	and	r6, r6, #(1 << 31)
+	cmp	r6, #0
+	bne	dsm_fifo_reset2_wait
+dsm_restore_mmdc_io_done:
+
 	ldr	r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
 	/* let DDR out of self-refresh */
 	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html