From: Feng Kan <fkan@apm.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Cc: Feng Kan <fkan@apm.com>
Subject: [PATCH V3 3/3] power: reset: use syscon driver to parse reboot register from scu
Date: Tue, 14 Jan 2014 17:07:35 -0800 [thread overview]
Message-ID: <1389748055-23534-4-git-send-email-fkan@apm.com> (raw)
In-Reply-To: <1389748055-23534-1-git-send-email-fkan@apm.com>
Use the syscon driver to parse out the reboot register map and issue
reboot via the regmap function.
Signed-off-by: Feng Kan <fkan@apm.com>
---
drivers/power/reset/xgene-reboot.c | 75 +++++++++---------------------------
1 files changed, 19 insertions(+), 56 deletions(-)
diff --git a/drivers/power/reset/xgene-reboot.c b/drivers/power/reset/xgene-reboot.c
index ecd55f8..660ed8a 100644
--- a/drivers/power/reset/xgene-reboot.c
+++ b/drivers/power/reset/xgene-reboot.c
@@ -24,80 +24,43 @@
* For system shutdown, this is board specify. If a board designer
* implements GPIO shutdown, use the gpio-poweroff.c driver.
*/
-#include <linux/io.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
-#include <linux/stat.h>
-#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/reboot.h>
#include <asm/system_misc.h>
-struct xgene_reboot_context {
- struct platform_device *pdev;
- void *csr;
- u32 mask;
-};
+#define SCU_SRST 0x14
-static struct xgene_reboot_context *xgene_restart_ctx;
-
-static void xgene_restart(char str, const char *cmd)
+static void xgene_restart(enum reboot_mode reboot_mode, const char *cmd)
{
- struct xgene_reboot_context *ctx = xgene_restart_ctx;
unsigned long timeout;
+ struct regmap *map;
+ unsigned int ret;
+ struct device_node *dn;
+
+ dn = of_find_node_by_name(NULL, "reboot");
+ map = syscon_regmap_lookup_by_phandle(dn, "apm,scu");
+ if (IS_ERR(map)) {
+ ret = PTR_ERR(map);
+ pr_err("Reboot driver failed to get scu regmap: %d\n", ret);
+ return;
+ }
- /* Issue the reboot */
- if (ctx)
- writel(ctx->mask, ctx->csr);
+ regmap_write(map, SCU_SRST, 0x1);
timeout = jiffies + HZ;
while (time_before(jiffies, timeout))
cpu_relax();
- dev_emerg(&ctx->pdev->dev, "Unable to restart system\n");
+ pr_emerg("Unable to restart system\n");
}
-static int xgene_reboot_probe(struct platform_device *pdev)
+static int __init xgene_reboot_init(void)
{
- struct xgene_reboot_context *ctx;
-
- ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
- if (!ctx) {
- dev_err(&pdev->dev, "out of memory for context\n");
- return -ENODEV;
- }
-
- ctx->csr = of_iomap(pdev->dev.of_node, 0);
- if (!ctx->csr) {
- devm_kfree(&pdev->dev, ctx);
- dev_err(&pdev->dev, "can not map resource\n");
- return -ENODEV;
- }
-
- if (of_property_read_u32(pdev->dev.of_node, "mask", &ctx->mask))
- ctx->mask = 0xFFFFFFFF;
-
- ctx->pdev = pdev;
arm_pm_restart = xgene_restart;
- xgene_restart_ctx = ctx;
-
return 0;
}
-
-static struct of_device_id xgene_reboot_of_match[] = {
- { .compatible = "apm,xgene-reboot" },
- {}
-};
-
-static struct platform_driver xgene_reboot_driver = {
- .probe = xgene_reboot_probe,
- .driver = {
- .name = "xgene-reboot",
- .of_match_table = xgene_reboot_of_match,
- },
-};
-
-static int __init xgene_reboot_init(void)
-{
- return platform_driver_register(&xgene_reboot_driver);
-}
device_initcall(xgene_reboot_init);
--
1.7.6.1
next prev parent reply other threads:[~2014-01-15 1:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-15 1:07 [PATCH V3 0/3] Enable X-Gene platform reboot driver Feng Kan
2014-01-15 1:07 ` [PATCH V3 1/3] arm64: add reboot dts entry for X-Gene platform Feng Kan
2014-01-15 1:07 ` [PATCH V3 2/3] arm64: Enable system reset via arch Kconfig for X-Gene system Feng Kan
2014-01-15 1:07 ` Feng Kan [this message]
2014-01-17 16:52 ` [PATCH V3 3/3] power: reset: use syscon driver to parse reboot register from scu Arnd Bergmann
2014-01-17 16:59 ` Alexander Shiyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389748055-23534-4-git-send-email-fkan@apm.com \
--to=fkan@apm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).