devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Loc Ho <lho@apm.com>
To: olof@lixom.net, tj@kernel.org, arnd@arndb.de
Cc: linux-scsi@vger.kernel.org, linux-ide@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	dmilburn@redhat.com, jcm@redhat.com, patches@apm.com,
	Loc Ho <lho@apm.com>, Tuan Phan <tphan@apm.com>,
	Suman Tripathi <stripathi@apm.com>
Subject: [PATCH v9 4/4] arm64: Add APM X-Gene SoC SATA host controller DTS entries
Date: Wed, 15 Jan 2014 00:11:50 -0700	[thread overview]
Message-ID: <1389769910-15505-5-git-send-email-lho@apm.com> (raw)
In-Reply-To: <1389769910-15505-4-git-send-email-lho@apm.com>

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Tuan Phan <tphan@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
---
 arch/arm64/boot/dts/apm-storm.dtsi |   75 ++++++++++++++++++++++++++++++++++++
 1 files changed, 75 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
index a1f475d..34900d2 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -221,6 +221,48 @@
 				enable-offset = <0x0>;
 				enable-mask = <0x06>;
 			};
+
+			sata01clk: sata01clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "socplldiv2";
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata01clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			sata23clk: sata23clk@1f22c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "socplldiv2";
+				reg = <0x0 0x1f22c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata23clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			sata45clk: sata45clk@1f23c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "socplldiv2";
+				reg = <0x0 0x1f23c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata45clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
 		};
 
 		serial0: serial@1c020000 {
@@ -269,5 +311,38 @@
 			apm,tx-boost-gain = <31 31 31 31 31 31>;
 			apm,tx-eye-tuning = <2 10 10 2 10 10>;
 		};
+
+		sata1: sata@1a000000 {
+			compatible = "apm,xgene-ahci-sgmii";
+			reg = <0x0 0x1a000000 0x0 0x1000>,
+			      <0x0 0x1f210000 0x0 0x10000>;
+			interrupts = <0x0 0x86 0x4>;
+			status = "disabled";
+			clocks = <&sata01clk 0>;
+			phys = <&phy1 0>;
+			phy-names = "sata-6g";
+		};
+
+		sata2: sata@1a400000 {
+			compatible = "apm,xgene-ahci-sgmii";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x10000>;
+			interrupts = <0x0 0x87 0x4>;
+			status = "ok";
+			clocks = <&sata23clk 0>;
+			phys = <&phy2 0>;
+			phy-names = "sata-6g";
+		};
+
+		sata3: sata@1a800000 {
+			compatible = "apm,xgene-ahci-pcie";
+			reg = <0x0 0x1a800000 0x0 0x1000>,
+			      <0x0 0x1f230000 0x0 0x10000>;
+			interrupts = <0x0 0x88 0x4>;
+			status = "ok";
+			clocks = <&sata45clk 0>;
+			phys = <&phy3 0>;
+			phy-names = "sata-6g";
+		};
 	};
 };
-- 
1.5.5


  reply	other threads:[~2014-01-15  7:11 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-15  7:11 [PATCH v9 0/4] ata: Add APM X-Gene SoC SATA host controller support Loc Ho
2014-01-15  7:11 ` [PATCH v9 1/4] ata: Export required functions by APM X-Gene SATA driver Loc Ho
2014-01-15  7:11   ` [PATCH v9 2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding Loc Ho
2014-01-15  7:11     ` [PATCH v9 3/4] ata: Add APM X-Gene SoC SATA host controller driver Loc Ho
2014-01-15  7:11       ` Loc Ho [this message]
2014-01-15 11:18     ` [PATCH v9 2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding Mark Rutland
2014-01-15 20:04       ` Loc Ho
2014-01-15 20:10         ` Arnd Bergmann
2014-01-15 21:08           ` Loc Ho
2014-01-15 21:12             ` Arnd Bergmann
2014-01-15 22:07               ` Loc Ho
2014-01-15 23:59                 ` Loc Ho
2014-01-16 10:38                   ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389769910-15505-5-git-send-email-lho@apm.com \
    --to=lho@apm.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=dmilburn@redhat.com \
    --cc=jcm@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=patches@apm.com \
    --cc=stripathi@apm.com \
    --cc=tj@kernel.org \
    --cc=tphan@apm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).