From: Jingchang Lu <b35083@freescale.com>
To: vinod.koul@intel.com
Cc: dan.j.williams@intel.com, arnd@arndb.de, shawn.guo@linaro.org,
pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Jingchang Lu <b35083@freescale.com>
Subject: [PATCHv9 1/2] ARM: dts: vf610: Add eDMA node
Date: Thu, 16 Jan 2014 10:29:59 +0800 [thread overview]
Message-ID: <1389839400-29728-2-git-send-email-b35083@freescale.com> (raw)
In-Reply-To: <1389839400-29728-1-git-send-email-b35083@freescale.com>
Signed-off-by: Jingchang Lu <b35083@freescale.com>
---
changes in v9:
remove include/dt-bindings/dma/vf610-edma.h, the request source ID
is the same as SoC's reference manual.
changes in v8:
describe dmamux info in edma node to avoid confusion.
change eDMA requst source macro definitions.
changes in v7:
fix dmamux2 and dmamux3 register number.
no changes in v2 ~ v6.
arch/arm/boot/dts/vf610.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 48dbfe5..8febb29f 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -88,6 +88,21 @@
arm,tag-latency = <2 2 2>;
};
+ edma0: dma-controller@40018000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x40018000 0x2000>,
+ <0x40024000 0x1000>,
+ <0x40025000 0x1000>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clks VF610_CLK_DMAMUX0>,
+ <&clks VF610_CLK_DMAMUX1>;
+ };
+
uart0: serial@40027000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40027000 0x1000>;
@@ -263,6 +278,21 @@
reg = <0x40080000 0x80000>;
ranges;
+ edma1: dma-controller@40098000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x40098000 0x2000>,
+ <0x400a1000 0x1000>,
+ <0x400a2000 0x1000>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clks VF610_CLK_DMAMUX2>,
+ <&clks VF610_CLK_DMAMUX3>;
+ };
+
uart4: serial@400a9000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400a9000 0x1000>;
--
1.8.0
next prev parent reply other threads:[~2014-01-16 2:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-16 2:29 [PATCHv9 0/2] dma: Add Freescale eDMA engine driver support Jingchang Lu
2014-01-16 2:29 ` Jingchang Lu [this message]
2014-01-16 2:30 ` [PATCHv9 2/2] " Jingchang Lu
2014-01-16 11:02 ` Arnd Bergmann
2014-01-17 2:22 ` Jingchang Lu
2014-01-16 11:12 ` Mark Rutland
2014-01-17 2:58 ` Jingchang Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389839400-29728-2-git-send-email-b35083@freescale.com \
--to=b35083@freescale.com \
--cc=arnd@arndb.de \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=shawn.guo@linaro.org \
--cc=swarren@wwwdotorg.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).