From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Dooks Subject: [PATCH 1/6] pci-rcar-gen2: add initial device tree documentation Date: Sat, 18 Jan 2014 15:03:35 +0000 Message-ID: <1390057420-13226-2-git-send-email-ben.dooks@codethink.co.uk> References: <1390057420-13226-1-git-send-email-ben.dooks@codethink.co.uk> Return-path: In-Reply-To: <1390057420-13226-1-git-send-email-ben.dooks@codethink.co.uk> Sender: linux-sh-owner@vger.kernel.org To: linux-kernel@lists.codethink.co.uk Cc: linux-sh@vger.kernel.org, Ben Dooks , devicetree@vger.kernel.org, horms+renesas@verge.net.au List-Id: devicetree@vger.kernel.org Add initial documentation for the pci-rcar-gen2 driver device tree bindings. This is not yet complete and needs work on the sub-nodes for the PCI bus. Signed-off-by: Ben Dooks --- Cc: linux-sh@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: horms+renesas@verge.net.au --- Documentation/devicetree/bindings/pci/renessas,pci-r8a7790 | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/renessas,pci-r8a7790 diff --git a/Documentation/devicetree/bindings/pci/renessas,pci-r8a7790 b/Documentation/devicetree/bindings/pci/renessas,pci-r8a7790 new file mode 100644 index 0000000..65268d9 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/renessas,pci-r8a7790 @@ -0,0 +1,12 @@ +Renesas internal AHB to PCI bridge + +This is the bridge used internally to connect the USB controllers to the +AHB. + +Required properties: + - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC + - reg : A list of physical regions to access the device. The first is + the operational registers for the OHCI/EHCI controller and the + second region is for the bridge configuration and control registers. + - interrupts : interrupt for the device + - clocks : The reference to the device clock \ No newline at end of file -- 1.8.5.2