From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anson Huang Subject: [PATCH V2] ARM: dts: imx6qdl-sabresd: correct gpio key's active state Date: Mon, 20 Jan 2014 20:02:38 +0800 Message-ID: <1390219358-22157-1-git-send-email-b20788@freescale.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org >>From schematic, the power, vol+/- key's active state is low, so we need to set the gpio flag to active low. Signed-off-by: Anson Huang --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 91e5dd4..96a921b 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -10,6 +10,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include #include / { @@ -58,21 +59,21 @@ power { label = "Power Button"; - gpios = <&gpio3 29 0>; + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; gpio-key,wakeup; linux,code = ; }; volume-up { label = "Volume Up"; - gpios = <&gpio1 4 0>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; gpio-key,wakeup; linux,code = ; }; volume-down { label = "Volume Down"; - gpios = <&gpio1 5 0>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; gpio-key,wakeup; linux,code = ; }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html