From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>
Cc: linux-usb <linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 2/2] ehci-platform: Add support for controllers with big-endian regs / descriptors
Date: Tue, 21 Jan 2014 16:48:35 +0100 [thread overview]
Message-ID: <1390319315-8391-2-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1390319315-8391-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
This uses the already documented devicetree booleans for this.
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
drivers/usb/host/Kconfig | 3 +++
drivers/usb/host/ehci-platform.c | 33 +++++++++++++++++++++++++++++++--
2 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 237d7b1..4af41f3 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -256,6 +256,9 @@ config USB_EHCI_ATH79
config USB_EHCI_HCD_PLATFORM
tristate "Generic EHCI driver for a platform device"
depends on !PPC_OF
+ # Support BE on architectures which have readl_be
+ select USB_EHCI_BIG_ENDIAN_DESC if (AVR32 || MIPS || MICROBLAZE || SPARC || PPC32 || PPC64)
+ select USB_EHCI_BIG_ENDIAN_MMIO if (AVR32 || MIPS || MICROBLAZE || SPARC || PPC32 || PPC64)
default n
---help---
Adds an EHCI host driver for a generic platform device, which
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index d8aebc0..5888abb 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -55,8 +55,10 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
hcd->has_tt = pdata->has_tt;
ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
- ehci->big_endian_desc = pdata->big_endian_desc;
- ehci->big_endian_mmio = pdata->big_endian_mmio;
+ if (pdata->big_endian_desc)
+ ehci->big_endian_desc = 1;
+ if (pdata->big_endian_mmio)
+ ehci->big_endian_mmio = 1;
if (pdata->pre_setup) {
retval = pdata->pre_setup(hcd);
@@ -142,6 +144,7 @@ static int ehci_platform_probe(struct platform_device *dev)
struct resource *res_mem;
struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
struct ehci_platform_priv *priv;
+ struct ehci_hcd *ehci;
int err, irq, clk = 0;
if (usb_disabled())
@@ -177,8 +180,34 @@ static int ehci_platform_probe(struct platform_device *dev)
platform_set_drvdata(dev, hcd);
dev->dev.platform_data = pdata;
priv = hcd_to_ehci_priv(hcd);
+ ehci = hcd_to_ehci(hcd);
if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
+ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
+ ehci->big_endian_mmio = 1;
+
+ if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
+ ehci->big_endian_desc = 1;
+
+ if (of_property_read_bool(dev->dev.of_node, "big-endian"))
+ ehci->big_endian_mmio = ehci->big_endian_desc = 1;
+
+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+ if (ehci->big_endian_mmio) {
+ dev_err(&dev->dev,
+ "Error big-endian-regs not compiled in\n");
+ err = -EINVAL;
+ goto err_put_hcd;
+ }
+#endif
+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
+ if (ehci->big_endian_desc) {
+ dev_err(&dev->dev,
+ "Error big-endian-desc not compiled in\n");
+ err = -EINVAL;
+ goto err_put_hcd;
+ }
+#endif
priv->phy = devm_phy_get(&dev->dev, "usb");
if (IS_ERR(priv->phy)) {
err = PTR_ERR(priv->phy);
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-01-21 15:48 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-21 15:48 [PATCH 1/2] ohci-platform: Add support for controllers with big-endian regs / descriptors Hans de Goede
[not found] ` <1390319315-8391-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-21 15:48 ` Hans de Goede [this message]
[not found] ` <1390319315-8391-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-21 19:39 ` [PATCH 2/2] ehci-platform: " Florian Fainelli
[not found] ` <CAGVrzcZJBjVvJm5WkpXpp_u3a-q4qMqgHvcxCJF=RUoeEwdzjQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-01-22 19:28 ` Hans de Goede
2014-01-22 20:34 ` Jonas Gorski
[not found] ` <20140122213434.00000f25-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2014-01-22 20:52 ` Hans de Goede
[not found] ` <52E02F84.70705-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-22 21:02 ` Hans de Goede
2014-01-22 21:17 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1401221614550.1310-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2014-01-22 23:03 ` Jonas Gorski
[not found] ` <20140123000330.00002567-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2014-01-23 15:46 ` Alan Stern
2014-01-21 16:40 ` [PATCH 1/2] ohci-platform: " Alan Stern
2014-01-21 17:01 ` Hans de Goede
[not found] ` <52DEA7CD.5070107-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-21 18:09 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1401211308040.1272-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2014-01-21 19:48 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390319315-8391-2-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).