[PATCH 1/6] ARM: dts: Add CPU OPP table for omap37xx100

[Christoph Fritz <chf.fritz@googlemail.com>]

This patch adds file omap37xx100.dtsi which includs a SoC specific table
for CPU OPP.

Please keep in mind that am/dm37xx100 variants differ from am/dm37xx
SoCs without nomenclature marker prefix "100". This marker indicates
the maximum cpu frequency. 100 stands for 1 GHz-Cortex-A8, blank means
maximum 800 MHz.

For more info, see Datasheet http://www.ti.com/lit/ds/sprs685d/sprs685d.pdf
section 7.2.1 "Device and Development-Support Tool Nomenclature".

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
---
 arch/arm/boot/dts/omap37xx100.dtsi |   44 ++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap37xx100.dtsi

diff --git a/arch/arm/boot/dts/omap37xx100.dtsi b/arch/arm/boot/dts/omap37xx100.dtsi
new file mode 100644
index 0000000..064661e
--- /dev/null
+++ b/arch/arm/boot/dts/omap37xx100.dtsi
@@ -0,0 +1,44 @@
+/*
+ * Device Tree Source for OMAP37x SoC
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	cpus {
+		/* AM/DM37xx */
+		cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				 125000   975000
+				 250000  1075000
+				 500000  1100000
+				 600000  1140000
+				 800000  1270000
+				1000000  1380000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+
+	ocp {
+		/* uart4 is only available on CBP and CBC packages */
+		uart4: serial@49042000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x49042000 0x400>;
+			interrupts = <80>;
+			dmas = <&sdma 81 &sdma 82>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+	};
+};
-- 
1.7.10.4