From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Oliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Richard Zhu
<Hong-Xing.Zhu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>,
linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v5 10/14] ahci-imx: Port to library-ised ahci_platform
Date: Wed, 22 Jan 2014 20:04:45 +0100 [thread overview]
Message-ID: <1390417489-5354-11-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1390417489-5354-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
This avoids the ugliness of creating a nested platform device from probe.
Tested on a wandboard i.mx6 quad.
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
.../devicetree/bindings/ata/ahci-platform.txt | 8 +-
drivers/ata/ahci_imx.c | 218 +++++++++------------
2 files changed, 101 insertions(+), 125 deletions(-)
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 78b2e80..5be0f5b 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -5,8 +5,8 @@ Each SATA controller should have its own node.
Required properties:
- compatible : compatible list, one of "snps,spear-ahci",
- "snps,exynos5440-ahci", "ibm,476gtr-ahci", or
- "allwinner,sun4i-a10-ahci"
+ "snps,exynos5440-ahci", "ibm,476gtr-ahci",
+ "allwinner,sun4i-a10-ahci" or "fsl,imx6q-ahci"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
@@ -18,6 +18,10 @@ Optional properties:
allwinner,sun4i-a10-ahci required properties:
- clocks : index 0 must point to the sata_ref clk, 1 to the ahb clk
+fsl,imx6q-ahci required properties:
+- clocks : index 0 must point to the sataf clk, 1 to the sata_ref
+ clk and 2 to the ahb clk
+
Examples:
sata@ffe08000 {
compatible = "snps,spear-ahci";
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 49fa0ca..2210866 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -34,10 +34,14 @@ enum {
HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
};
+enum {
+ CLK_SATA,
+ CLK_SATA_REF,
+ CLK_AHB
+};
+
struct imx_ahci_priv {
struct platform_device *ahci_pdev;
- struct clk *sata_ref_clk;
- struct clk *ahb_clk;
struct regmap *gpr;
bool no_device;
bool first_time;
@@ -47,6 +51,8 @@ static int ahci_imx_hotplug;
module_param_named(hotplug, ahci_imx_hotplug, int, 0644);
MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)");
+static void ahci_imx_host_stop(struct ata_host *host);
+
static void ahci_imx_error_handler(struct ata_port *ap)
{
u32 reg_val;
@@ -54,7 +60,7 @@ static void ahci_imx_error_handler(struct ata_port *ap)
struct ata_host *host = dev_get_drvdata(ap->dev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(ap->dev->parent);
+ struct imx_ahci_priv *imxpriv = hpriv->plat_data;
ahci_error_handler(ap);
@@ -75,12 +81,13 @@ static void ahci_imx_error_handler(struct ata_port *ap)
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
- clk_disable_unprepare(imxpriv->sata_ref_clk);
+ ahci_platform_disable_clks(hpriv);
imxpriv->no_device = true;
}
static struct ata_port_operations ahci_imx_ops = {
- .inherits = &ahci_platform_ops,
+ .inherits = &ahci_ops,
+ .host_stop = ahci_imx_host_stop,
.error_handler = ahci_imx_error_handler,
};
@@ -91,25 +98,46 @@ static const struct ata_port_info ahci_imx_port_info = {
.port_ops = &ahci_imx_ops,
};
-static int imx6q_sata_init(struct device *dev, struct ahci_host_priv *hpriv)
+static int imx_ahci_probe(struct platform_device *pdev)
{
- int ret = 0;
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct imx_ahci_priv *imxpriv;
unsigned int reg_val;
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
+ int rc;
+
+ imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
+ if (!imxpriv)
+ return -ENOMEM;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+ if (!hpriv->clks[CLK_AHB]) {
+ dev_err(dev, "no ahb clk, need sata, sata_ref and ahb clks\n");
+ rc = -ENOENT;
+ goto put_resources;
+ }
+ hpriv->plat_data = imxpriv;
imxpriv->gpr =
syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
if (IS_ERR(imxpriv->gpr)) {
dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n");
- return PTR_ERR(imxpriv->gpr);
+ rc = PTR_ERR(imxpriv->gpr);
+ goto put_resources;
}
- ret = clk_prepare_enable(imxpriv->sata_ref_clk);
- if (ret < 0) {
- dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret);
- return ret;
+ if (hpriv->target_pwr) {
+ rc = regulator_enable(hpriv->target_pwr);
+ if (rc)
+ goto put_resources;
}
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+ goto disable_regulator;
+
/*
* set PHY Paremeters, two steps to configure the GPR13,
* one write for rest of parameters, mask of first write
@@ -156,24 +184,53 @@ static int imx6q_sata_init(struct device *dev, struct ahci_host_priv *hpriv)
writel(reg_val, hpriv->mmio + HOST_PORTS_IMPL);
}
- reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
+ reg_val = clk_get_rate(hpriv->clks[CLK_AHB]) / 1000;
writel(reg_val, hpriv->mmio + HOST_TIMER1MS);
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, 0, 0);
+ if (rc)
+ goto disable_clks;
+
return 0;
+
+disable_clks:
+ ahci_platform_disable_clks(hpriv);
+disable_regulator:
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+put_resources:
+ ahci_platform_put_resources(hpriv);
+ return rc;
}
-static void imx6q_sata_exit(struct device *dev)
+static void ahci_imx_host_stop(struct ata_host *host)
{
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct imx_ahci_priv *imxpriv = hpriv->plat_data;
- regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
+ if (!imxpriv->no_device) {
+ regmap_update_bits(imxpriv->gpr, 0x34,
+ IMX6Q_GPR13_SATA_MPLL_CLK_EN,
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
- clk_disable_unprepare(imxpriv->sata_ref_clk);
+ ahci_platform_disable_clks(hpriv);
+ }
+
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+
+ ahci_platform_put_resources(hpriv);
}
static int imx_ahci_suspend(struct device *dev)
{
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct imx_ahci_priv *imxpriv = hpriv->plat_data;
+ int rc;
+
+ rc = ahci_platform_suspend_host(dev);
+ if (rc)
+ return rc;
/*
* If no_device is set, The CLKs had been gated off in the
@@ -183,19 +240,30 @@ static int imx_ahci_suspend(struct device *dev)
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
- clk_disable_unprepare(imxpriv->sata_ref_clk);
+ ahci_platform_disable_clks(hpriv);
}
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+
return 0;
}
static int imx_ahci_resume(struct device *dev)
{
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct imx_ahci_priv *imxpriv = hpriv->plat_data;
int ret;
+ if (hpriv->target_pwr) {
+ ret = regulator_enable(hpriv->target_pwr);
+ if (ret)
+ return ret;
+ }
+
if (!imxpriv->no_device) {
- ret = clk_prepare_enable(imxpriv->sata_ref_clk);
+ ret = ahci_platform_enable_clks(hpriv);
if (ret < 0) {
dev_err(dev, "pre-enable sata_ref clock err:%d\n", ret);
return ret;
@@ -207,123 +275,27 @@ static int imx_ahci_resume(struct device *dev)
usleep_range(1000, 2000);
}
- return 0;
+ return ahci_platform_resume_host(dev);
}
-static struct ahci_platform_data imx6q_sata_pdata = {
- .init = imx6q_sata_init,
- .exit = imx6q_sata_exit,
- .ata_port_info = &ahci_imx_port_info,
- .suspend = imx_ahci_suspend,
- .resume = imx_ahci_resume,
-};
+static SIMPLE_DEV_PM_OPS(ahci_imx_pm_ops, imx_ahci_suspend, imx_ahci_resume);
static const struct of_device_id imx_ahci_of_match[] = {
- { .compatible = "fsl,imx6q-ahci", .data = &imx6q_sata_pdata},
+ { .compatible = "fsl,imx6q-ahci", },
{},
};
MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
-static int imx_ahci_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct resource *mem, *irq, res[2];
- const struct of_device_id *of_id;
- const struct ahci_platform_data *pdata = NULL;
- struct imx_ahci_priv *imxpriv;
- struct device *ahci_dev;
- struct platform_device *ahci_pdev;
- int ret;
-
- imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
- if (!imxpriv) {
- dev_err(dev, "can't alloc ahci_host_priv\n");
- return -ENOMEM;
- }
-
- ahci_pdev = platform_device_alloc("ahci", -1);
- if (!ahci_pdev)
- return -ENODEV;
-
- ahci_dev = &ahci_pdev->dev;
- ahci_dev->parent = dev;
-
- imxpriv->no_device = false;
- imxpriv->first_time = true;
- imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
- if (IS_ERR(imxpriv->ahb_clk)) {
- dev_err(dev, "can't get ahb clock.\n");
- ret = PTR_ERR(imxpriv->ahb_clk);
- goto err_out;
- }
-
- imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref");
- if (IS_ERR(imxpriv->sata_ref_clk)) {
- dev_err(dev, "can't get sata_ref clock.\n");
- ret = PTR_ERR(imxpriv->sata_ref_clk);
- goto err_out;
- }
-
- imxpriv->ahci_pdev = ahci_pdev;
- platform_set_drvdata(pdev, imxpriv);
-
- of_id = of_match_device(imx_ahci_of_match, dev);
- if (of_id) {
- pdata = of_id->data;
- } else {
- ret = -EINVAL;
- goto err_out;
- }
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!mem || !irq) {
- dev_err(dev, "no mmio/irq resource\n");
- ret = -ENOMEM;
- goto err_out;
- }
-
- res[0] = *mem;
- res[1] = *irq;
-
- ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32);
- ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask;
- ahci_dev->of_node = dev->of_node;
-
- ret = platform_device_add_resources(ahci_pdev, res, 2);
- if (ret)
- goto err_out;
-
- ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata));
- if (ret)
- goto err_out;
-
- ret = platform_device_add(ahci_pdev);
- if (ret) {
-err_out:
- platform_device_put(ahci_pdev);
- return ret;
- }
-
- return 0;
-}
-static int imx_ahci_remove(struct platform_device *pdev)
-{
- struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev);
- struct platform_device *ahci_pdev = imxpriv->ahci_pdev;
-
- platform_device_unregister(ahci_pdev);
- return 0;
-}
static struct platform_driver imx_ahci_driver = {
.probe = imx_ahci_probe,
- .remove = imx_ahci_remove,
+ .remove = ata_platform_remove_one,
.driver = {
.name = "ahci-imx",
.owner = THIS_MODULE,
.of_match_table = imx_ahci_of_match,
+ .pm = &ahci_imx_pm_ops,
},
};
module_platform_driver(imx_ahci_driver);
--
1.8.5.3
next prev parent reply other threads:[~2014-01-22 19:04 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-22 19:04 [PATCH v5 00/14] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver Hans de Goede
[not found] ` <1390417489-5354-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-22 19:04 ` [PATCH v5 01/14] libahci: Allow drivers to override start_engine Hans de Goede
2014-01-22 19:04 ` [PATCH v5 02/14] libahci: Move ahci_host_priv declaration to include/linux/ahci.h Hans de Goede
2014-01-22 19:04 ` [PATCH v5 03/14] ahci-platform: Pass ahci_host_priv ptr to ahci_platform_data init method Hans de Goede
2014-01-22 19:04 ` [PATCH v5 04/14] ahci-platform: Add support for devices with more then 1 clock Hans de Goede
2014-01-22 19:04 ` [PATCH v5 05/14] ahci-platform: Add support for an optional regulator for sata-target power Hans de Goede
2014-01-22 19:04 ` [PATCH v5 06/14] ahci-platform: Add enable_ / disable_resources helper functions Hans de Goede
2014-01-22 19:04 ` [PATCH v5 07/14] ahci-platform: "Library-ise" ahci_probe functionality Hans de Goede
2014-01-27 10:39 ` Roger Quadros
[not found] ` <52E63778.5000509-l0cyMroinI0@public.gmane.org>
2014-01-27 10:51 ` Hans de Goede
[not found] ` <52E63A1F.6080301-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-27 11:03 ` Roger Quadros
[not found] ` <52E63D08.6080704-l0cyMroinI0@public.gmane.org>
2014-01-27 11:28 ` Hans de Goede
[not found] ` <52E642F7.3000308-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-27 14:27 ` Roger Quadros
2014-01-22 19:04 ` [PATCH v5 08/14] ahci-platform: "Library-ise" suspend / resume functionality Hans de Goede
2014-02-03 14:53 ` Arnd Bergmann
[not found] ` <201402031553.46083.arnd-r2nGTMty4D4@public.gmane.org>
2014-02-04 10:20 ` Hans de Goede
2014-01-22 19:04 ` [PATCH v5 09/14] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform Hans de Goede
2014-01-22 19:04 ` Hans de Goede [this message]
2014-01-22 19:04 ` [PATCH v5 11/14] ahci-imx: Add imx_ahci_phy_init / _exit helpers Hans de Goede
2014-01-22 19:04 ` [PATCH v5 12/14] ahci-imx: Fix link not coming back up after suspend / resume Hans de Goede
2014-01-22 19:04 ` [PATCH v5 13/14] ARM: sun4i: dts: Add ahci / sata support Hans de Goede
[not found] ` <1390417489-5354-14-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-23 8:34 ` Chen-Yu Tsai
[not found] ` <CAGb2v65mYK7Lo_KC+sGvYG7P2kDOy7CZgGane2eY8+-pMvH1mw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-01-23 14:48 ` Hans de Goede
2014-01-31 13:45 ` Maxime Ripard
2014-02-03 10:35 ` Hans de Goede
[not found] ` <52EF70E2.6070803-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-04 9:44 ` Maxime Ripard
2014-01-22 19:04 ` [PATCH v5 14/14] ARM: sun7i: " Hans de Goede
[not found] ` <1390417489-5354-15-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-31 13:46 ` Maxime Ripard
2014-02-03 22:10 ` Hans de Goede
2014-02-03 16:09 ` [PATCH v5 00/14] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver Tejun Heo
[not found] ` <20140203160936.GC30250-Gd/HAXX7CRxy/B6EtB590w@public.gmane.org>
2014-02-03 22:07 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390417489-5354-11-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=Hong-Xing.Zhu-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org \
--cc=rogerq-l0cyMroinI0@public.gmane.org \
--cc=tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).